/* * Compatibility mode system call entry point for x86-64. * * Copyright 2000-2002 Andi Kleen, SuSE Labs. */ #include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm-offsets.h> #include <asm/current.h> #include <asm/errno.h> #include <asm/ia32_unistd.h> #include <asm/thread_info.h> #include <asm/segment.h> #include <asm/irqflags.h> #include <linux/linkage.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) #define __AUDIT_ARCH_LE 0x40000000 #ifndef CONFIG_AUDITSYSCALL #define sysexit_audit ia32_ret_from_sys_call #define sysretl_audit ia32_ret_from_sys_call #endif #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8) .macro IA32_ARG_FIXUP noebp=0 movl %edi,%r8d .if \noebp .else movl %ebp,%r9d .endif xchg %ecx,%esi movl %ebx,%edi movl %edx,%edx /* zero extension */ .endm /* clobbers %eax */ .macro CLEAR_RREGS offset=0, _r9=rax xorl %eax,%eax movq %rax,\offset+R11(%rsp) movq %rax,\offset+R10(%rsp) movq %\_r9,\offset+R9(%rsp) movq %rax,\offset+R8(%rsp) .endm /* * Reload arg registers from stack in case ptrace changed them. * We don't reload %eax because syscall_trace_enter() returned * the value it wants us to use in the table lookup. */ .macro LOAD_ARGS32 offset, _r9=0 .if \_r9 movl \offset+16(%rsp),%r9d .endif movl \offset+40(%rsp),%ecx movl \offset+48(%rsp),%edx movl \offset+56(%rsp),%esi movl \offset+64(%rsp),%edi .endm .macro CFI_STARTPROC32 simple CFI_STARTPROC \simple CFI_UNDEFINED r8 CFI_UNDEFINED r9 CFI_UNDEFINED r10 CFI_UNDEFINED r11 CFI_UNDEFINED r12 CFI_UNDEFINED r13 CFI_UNDEFINED r14 CFI_UNDEFINED r15 .endm #ifdef CONFIG_PARAVIRT ENTRY(native_usergs_sysret32) swapgs sysretl ENDPROC(native_usergs_sysret32) ENTRY(native_irq_enable_sysexit) swapgs sti sysexit ENDPROC(native_irq_enable_sysexit) #endif /* * 32bit SYSENTER instruction entry. * * Arguments: * %eax System call number. * %ebx Arg1 * %ecx Arg2 * %edx Arg3 * %esi Arg4 * %edi Arg5 * %ebp user stack * 0(%ebp) Arg6 * * Interrupts off. * * This is purely a fast path. For anything complicated we use the int 0x80 * path below. Set up a complete hardware stack frame to share code * with the int 0x80 path. */ ENTRY(ia32_sysenter_target) CFI_STARTPROC32 simple CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,0 CFI_REGISTER rsp,rbp SWAPGS_UNSAFE_STACK movq PER_CPU_VAR(kernel_stack), %rsp addq $(KERNEL_STACK_OFFSET),%rsp /* * No need to follow this irqs on/off section: the syscall * disabled irqs, here we enable it straight after entry: */ ENABLE_INTERRUPTS(CLBR_NONE) movl %ebp,%ebp /* zero extension */ pushq $__USER32_DS CFI_ADJUST_CFA_OFFSET 8 /*CFI_REL_OFFSET ss,0*/ pushq %rbp CFI_ADJUST_CFA_OFFSET 8 CFI_REL_OFFSET rsp,0 pushfq CFI_ADJUST_CFA_OFFSET 8 /*CFI_REL_OFFSET rflags,0*/ movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d CFI_REGISTER rip,r10 pushq $__USER32_CS CFI_ADJUST_CFA_OFFSET 8 /*CFI_REL_OFFSET cs,0*/ movl %eax, %eax pushq %r10 CFI_ADJUST_CFA_OFFSET 8 CFI_REL_OFFSET rip,0 pushq %rax CFI_ADJUST_CFA_OFFSET 8 cld SAVE_ARGS 0,0,1 /* no need to do an access_ok check here because rbp has been 32bit zero extended */ 1: movl (%rbp),%ebp .section __ex_table,"a" .quad 1b,ia32_badarg .previous GET_THREAD_INFO(%r10) orl $TS_COMPAT,TI_status(%r10) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) CFI_REMEMBER_STATE jnz sysenter_tracesys cmpl $(IA32_NR_syscalls-1),%eax ja ia32_badsys sysenter_do_call: IA32_ARG_FIXUP sysenter_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF testl $_TIF_ALLWORK_MASK,TI_flags(%r10) jnz sysexit_audit sysexit_from_sys_call: andl $~TS_COMPAT,TI_status(%r10) /* clear IF, that popfq doesn't enable interrupts early */ andl $~0x200,EFLAGS-R11(%rsp) movl RIP-R11(%rsp),%edx /* User %eip */ CFI_REGISTER rip,rdx RESTORE_ARGS 1,24,1,1,1,1 xorq %r8,%r8 xorq %r9,%r9 xorq %r10,%r10 xorq %r11,%r11 popfq CFI_ADJUST_CFA_OFFSET -8 /*CFI_RESTORE rflags*/ popq %rcx /* User %esp */ CFI_ADJUST_CFA_OFFSET -8 CFI_REGISTER rsp,rcx TRACE_IRQS_ON ENABLE_INTERRUPTS_SYSEXIT32 #ifdef CONFIG_AUDITSYSCALL .macro auditsys_entry_common movl %esi,%r9d /* 6th arg: 4th syscall arg */ movl %edx,%r8d /* 5th arg: 3rd syscall arg */ /* (already in %ecx) 4th arg: 2nd syscall arg */ movl %ebx,%edx /* 3rd arg: 1st syscall arg */ movl %eax,%esi /* 2nd arg: syscall number */ movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */ call audit_syscall_entry movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */ cmpl $(IA32_NR_syscalls-1),%eax ja ia32_badsys movl %ebx,%edi /* reload 1st syscall arg */ movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */ movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */ movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */ movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */ .endm .macro auditsys_exit exit testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) jnz ia32_ret_from_sys_call TRACE_IRQS_ON sti movl %eax,%esi /* second arg, syscall return value */ cmpl $0,%eax /* is it < 0? */ setl %al /* 1 if so, 0 if not */ movzbl %al,%edi /* zero-extend that into %edi */ inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ call audit_syscall_exit GET_THREAD_INFO(%r10) movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF testl %edi,TI_flags(%r10) jz \exit CLEAR_RREGS -ARGOFFSET jmp int_with_check .endm sysenter_auditsys: CFI_RESTORE_STATE auditsys_entry_common movl %ebp,%r9d /* reload 6th syscall arg */ jmp sysenter_dispatch sysexit_audit: auditsys_exit sysexit_from_sys_call #endif sysenter_tracesys: #ifdef CONFIG_AUDITSYSCALL testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) jz sysenter_auditsys #endif SAVE_REST CLEAR_RREGS movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST cmpl $(IA32_NR_syscalls-1),%eax ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */ jmp sysenter_do_call CFI_ENDPROC ENDPROC(ia32_sysenter_target) /* * 32bit SYSCALL instruction entry. * * Arguments: * %eax System call number. * %ebx Arg1 * %ecx return EIP * %edx Arg3 * %esi Arg4 * %edi Arg5 * %ebp Arg2 [note: not saved in the stack frame, should not be touched] * %esp user stack * 0(%esp) Arg6 * * Interrupts off. * * This is purely a fast path. For anything complicated we use the int 0x80 * path below. Set up a complete hardware stack frame to share code * with the int 0x80 path. */ ENTRY(ia32_cstar_target) CFI_STARTPROC32 simple CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ SWAPGS_UNSAFE_STACK movl %esp,%r8d CFI_REGISTER rsp,r8 movq PER_CPU_VAR(kernel_stack),%rsp /* * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: */ ENABLE_INTERRUPTS(CLBR_NONE) SAVE_ARGS 8,1,1 movl %eax,%eax /* zero extension */ movq %rax,ORIG_RAX-ARGOFFSET(%rsp) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */ movl %ebp,%ecx movq $__USER32_CS,CS-ARGOFFSET(%rsp) movq $__USER32_DS,SS-ARGOFFSET(%rsp) movq %r11,EFLAGS-ARGOFFSET(%rsp) /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/ movq %r8,RSP-ARGOFFSET(%rsp) CFI_REL_OFFSET rsp,RSP-ARGOFFSET /* no need to do an access_ok check here because r8 has been 32bit zero extended */ /* hardware stack frame is complete now */ 1: movl (%r8),%r9d .section __ex_table,"a" .quad 1b,ia32_badarg .previous GET_THREAD_INFO(%r10) orl $TS_COMPAT,TI_status(%r10) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) CFI_REMEMBER_STATE jnz cstar_tracesys cmpl $IA32_NR_syscalls-1,%eax ja ia32_badsys cstar_do_call: IA32_ARG_FIXUP 1 cstar_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF testl $_TIF_ALLWORK_MASK,TI_flags(%r10) jnz sysretl_audit sysretl_from_sys_call: andl $~TS_COMPAT,TI_status(%r10) RESTORE_ARGS 1,-ARG_SKIP,1,1,1 movl RIP-ARGOFFSET(%rsp),%ecx CFI_REGISTER rip,rcx movl EFLAGS-ARGOFFSET(%rsp),%r11d /*CFI_REGISTER rflags,r11*/ xorq %r10,%r10 xorq %r9,%r9 xorq %r8,%r8 TRACE_IRQS_ON movl RSP-ARGOFFSET(%rsp),%esp CFI_RESTORE rsp USERGS_SYSRET32 #ifdef CONFIG_AUDITSYSCALL cstar_auditsys: CFI_RESTORE_STATE movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */ auditsys_entry_common movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */ jmp cstar_dispatch sysretl_audit: auditsys_exit sysretl_from_sys_call #endif cstar_tracesys: #ifdef CONFIG_AUDITSYSCALL testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) jz cstar_auditsys #endif xchgl %r9d,%ebp SAVE_REST CLEAR_RREGS 0, r9 movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */ RESTORE_REST xchgl %ebp,%r9d cmpl $(IA32_NR_syscalls-1),%eax ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */ jmp cstar_do_call END(ia32_cstar_target) ia32_badarg: movq $-EFAULT,%rax jmp ia32_sysret CFI_ENDPROC /* * Emulated IA32 system calls via int 0x80. * * Arguments: * %eax System call number. * %ebx Arg1 * %ecx Arg2 * %edx Arg3 * %esi Arg4 * %edi Arg5 * %ebp Arg6 [note: not saved in the stack frame, should not be touched] * * Notes: * Uses the same stack frame as the x86-64 version. * All registers except %eax must be saved (but ptrace may violate that) * Arguments are zero extended. For system calls that want sign extension and * take long arguments a wrapper is needed. Most calls can just be called * directly. * Assumes it is only called from user space and entered with interrupts off. */ ENTRY(ia32_syscall) CFI_STARTPROC32 simple CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-RIP /*CFI_REL_OFFSET ss,SS-RIP*/ CFI_REL_OFFSET rsp,RSP-RIP /*CFI_REL_OFFSET rflags,EFLAGS-RIP*/ /*CFI_REL_OFFSET cs,CS-RIP*/ CFI_REL_OFFSET rip,RIP-RIP PARAVIRT_ADJUST_EXCEPTION_FRAME SWAPGS /* * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: */ ENABLE_INTERRUPTS(CLBR_NONE) movl %eax,%eax pushq %rax CFI_ADJUST_CFA_OFFSET 8 cld /* note the registers are not zero extended to the sf. this could be a problem. */ SAVE_ARGS 0,0,1 GET_THREAD_INFO(%r10) orl $TS_COMPAT,TI_status(%r10) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) jnz ia32_tracesys cmpl $(IA32_NR_syscalls-1),%eax ja ia32_badsys ia32_do_call: IA32_ARG_FIXUP call *ia32_sys_call_table(,%rax,8) # xxx: rip relative ia32_sysret: movq %rax,RAX-ARGOFFSET(%rsp) ia32_ret_from_sys_call: CLEAR_RREGS -ARGOFFSET jmp int_ret_from_sys_call ia32_tracesys: SAVE_REST CLEAR_RREGS movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST cmpl $(IA32_NR_syscalls-1),%eax ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */ jmp ia32_do_call END(ia32_syscall) ia32_badsys: movq $0,ORIG_RAX-ARGOFFSET(%rsp) movq $-ENOSYS,%rax jmp ia32_sysret quiet_ni_syscall: movq $-ENOSYS,%rax ret CFI_ENDPROC .macro PTREGSCALL label, func, arg .globl \label \label: leaq \func(%rip),%rax leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */ jmp ia32_ptregs_common .endm CFI_STARTPROC32 PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx PTREGSCALL stub32_execve, sys32_execve, %rcx PTREGSCALL stub32_fork, sys_fork, %rdi PTREGSCALL stub32_clone, sys32_clone, %rdx PTREGSCALL stub32_vfork, sys_vfork, %rdi PTREGSCALL stub32_iopl, sys_iopl, %rsi ENTRY(ia32_ptregs_common) popq %r11 CFI_ENDPROC CFI_STARTPROC32 simple CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-ARGOFFSET CFI_REL_OFFSET rax,RAX-ARGOFFSET CFI_REL_OFFSET rcx,RCX-ARGOFFSET CFI_REL_OFFSET rdx,RDX-ARGOFFSET CFI_REL_OFFSET rsi,RSI-ARGOFFSET CFI_REL_OFFSET rdi,RDI-ARGOFFSET CFI_REL_OFFSET rip,RIP-ARGOFFSET /* CFI_REL_OFFSET cs,CS-ARGOFFSET*/ /* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/ CFI_REL_OFFSET rsp,RSP-ARGOFFSET /* CFI_REL_OFFSET ss,SS-ARGOFFSET*/ SAVE_REST call *%rax RESTORE_REST jmp ia32_sysret /* misbalances the return cache */ CFI_ENDPROC END(ia32_ptregs_common) .section .rodata,"a" .align 8 ia32_sys_call_table: .quad sys_restart_syscall .quad sys_exit .quad stub32_fork .quad sys_read .quad sys_write .quad compat_sys_open /* 5 */ .quad sys_close .quad sys32_waitpid .quad sys_creat .quad sys_link .quad sys_unlink /* 10 */ .quad stub32_execve .quad sys_chdir .quad compat_sys_time .quad sys_mknod .quad sys_chmod /* 15 */ .quad sys_lchown16 .quad quiet_ni_syscall /* old break syscall holder */ .quad sys_stat .quad sys32_lseek .quad sys_getpid /* 20 */ .quad compat_sys_mount /* mount */ .quad sys_oldumount /* old_umount */ .quad sys_setuid16 .quad sys_getuid16 .quad compat_sys_stime /* stime */ /* 25 */ .quad compat_sys_ptrace /* ptrace */ .quad sys_alarm .quad sys_fstat /* (old)fstat */ .quad sys_pause .quad compat_sys_utime /* 30 */ .quad quiet_ni_syscall /* old stty syscall holder */ .quad quiet_ni_syscall /* old gtty syscall holder */ .quad sys_access .quad sys_nice .quad quiet_ni_syscall /* 35 */ /* old ftime syscall holder */ .quad sys_sync .quad sys32_kill .quad sys_rename .quad sys_mkdir .quad sys_rmdir /* 40 */ .quad sys_dup .quad sys_pipe .quad compat_sys_times .quad quiet_ni_syscall /* old prof syscall holder */ .quad sys_brk /* 45 */ .quad sys_setgid16 .quad sys_getgid16 .quad sys_signal .quad sys_geteuid16 .quad sys_getegid16 /* 50 */ .quad sys_acct .quad sys_umount /* new_umount */ .quad quiet_ni_syscall /* old lock syscall holder */ .quad compat_sys_ioctl .quad compat_sys_fcntl64 /* 55 */ .quad quiet_ni_syscall /* old mpx syscall holder */ .quad sys_setpgid .quad quiet_ni_syscall /* old ulimit syscall holder */ .quad sys32_olduname .quad sys_umask /* 60 */ .quad sys_chroot .quad compat_sys_ustat .quad sys_dup2 .quad sys_getppid .quad sys_getpgrp /* 65 */ .quad sys_setsid .quad sys32_sigaction .quad sys_sgetmask .quad sys_ssetmask .quad sys_setreuid16 /* 70 */ .quad sys_setregid16 .quad sys32_sigsuspend .quad compat_sys_sigpending .quad sys_sethostname .quad compat_sys_setrlimit /* 75 */ .quad compat_sys_old_getrlimit /* old_getrlimit */ .quad compat_sys_getrusage .quad compat_sys_gettimeofday .quad compat_sys_settimeofday .quad sys_getgroups16 /* 80 */ .quad sys_setgroups16 .quad sys32_old_select .quad sys_symlink .quad sys_lstat .quad sys_readlink /* 85 */ .quad sys_uselib .quad sys_swapon .quad sys_reboot .quad compat_sys_old_readdir .quad sys32_mmap /* 90 */ .quad sys_munmap .quad sys_truncate .quad sys_ftruncate .quad sys_fchmod .quad sys_fchown16 /* 95 */ .quad sys_getpriority .quad sys_setpriority .quad quiet_ni_syscall /* old profil syscall holder */ .quad compat_sys_statfs .quad compat_sys_fstatfs /* 100 */ .quad sys_ioperm .quad compat_sys_socketcall .quad sys_syslog .quad compat_sys_setitimer .quad compat_sys_getitimer /* 105 */ .quad compat_sys_newstat .quad compat_sys_newlstat .quad compat_sys_newfstat .quad sys32_uname .quad stub32_iopl /* 110 */ .quad sys_vhangup .quad quiet_ni_syscall /* old "idle" system call */ .quad sys32_vm86_warning /* vm86old */ .quad compat_sys_wait4 .quad sys_swapoff /* 115 */ .quad compat_sys_sysinfo .quad sys32_ipc .quad sys_fsync .quad stub32_sigreturn .quad stub32_clone /* 120 */ .quad sys_setdomainname .quad sys_uname .quad sys_modify_ldt .quad compat_sys_adjtimex .quad sys32_mprotect /* 125 */ .quad compat_sys_sigprocmask .quad quiet_ni_syscall /* create_module */ .quad sys_init_module .quad sys_delete_module .quad quiet_ni_syscall /* 130 get_kernel_syms */ .quad sys32_quotactl .quad sys_getpgid .quad sys_fchdir .quad quiet_ni_syscall /* bdflush */ .quad sys_sysfs /* 135 */ .quad sys_personality .quad quiet_ni_syscall /* for afs_syscall */ .quad sys_setfsuid16 .quad sys_setfsgid16 .quad sys_llseek /* 140 */ .quad compat_sys_getdents .quad compat_sys_select .quad sys_flock .quad sys_msync .quad compat_sys_readv /* 145 */ .quad compat_sys_writev .quad sys_getsid .quad sys_fdatasync .quad compat_sys_sysctl /* sysctl */ .quad sys_mlock /* 150 */ .quad sys_munlock .quad sys_mlockall .quad sys_munlockall .quad sys_sched_setparam .quad sys_sched_getparam /* 155 */ .quad sys_sched_setscheduler .quad sys_sched_getscheduler .quad sys_sched_yield .quad sys_sched_get_priority_max .quad sys_sched_get_priority_min /* 160 */ .quad sys32_sched_rr_get_interval .quad compat_sys_nanosleep .quad sys_mremap .quad sys_setresuid16 .quad sys_getresuid16 /* 165 */ .quad sys32_vm86_warning /* vm86 */ .quad quiet_ni_syscall /* query_module */ .quad sys_poll .quad compat_sys_nfsservctl .quad sys_setresgid16 /* 170 */ .quad sys_getresgid16 .quad sys_prctl .quad stub32_rt_sigreturn .quad sys32_rt_sigaction .quad sys32_rt_sigprocmask /* 175 */ .quad sys32_rt_sigpending .quad compat_sys_rt_sigtimedwait .quad sys32_rt_sigqueueinfo .quad sys_rt_sigsuspend .quad sys32_pread /* 180 */ .quad sys32_pwrite .quad sys_chown16 .quad sys_getcwd .quad sys_capget .quad sys_capset .quad stub32_sigaltstack .quad sys32_sendfile .quad quiet_ni_syscall /* streams1 */ .quad quiet_ni_syscall /* streams2 */ .quad stub32_vfork /* 190 */ .quad compat_sys_getrlimit .quad sys_mmap_pgoff .quad sys32_truncate64 .quad sys32_ftruncate64 .quad sys32_stat64 /* 195 */ .quad sys32_lstat64 .quad sys32_fstat64 .quad sys_lchown .quad sys_getuid .quad sys_getgid /* 200 */ .quad sys_geteuid .quad sys_getegid .quad sys_setreuid .quad sys_setregid .quad sys_getgroups /* 205 */ .quad sys_setgroups .quad sys_fchown .quad sys_setresuid .quad sys_getresuid .quad sys_setresgid /* 210 */ .quad sys_getresgid .quad sys_chown .quad sys_setuid .quad sys_setgid .quad sys_setfsuid /* 215 */ .quad sys_setfsgid .quad sys_pivot_root .quad sys_mincore .quad sys_madvise .quad compat_sys_getdents64 /* 220 getdents64 */ .quad compat_sys_fcntl64 .quad quiet_ni_syscall /* tux */ .quad quiet_ni_syscall /* security */ .quad sys_gettid .quad sys32_readahead /* 225 */ .quad sys_setxattr .quad sys_lsetxattr .quad sys_fsetxattr .quad sys_getxattr .quad sys_lgetxattr /* 230 */ .quad sys_fgetxattr .quad sys_listxattr .quad sys_llistxattr .quad sys_flistxattr .quad sys_removexattr /* 235 */ .quad sys_lremovexattr .quad sys_fremovexattr .quad sys_tkill .quad sys_sendfile64 .quad compat_sys_futex /* 240 */ .quad compat_sys_sched_setaffinity .quad compat_sys_sched_getaffinity .quad sys_set_thread_area .quad sys_get_thread_area .quad compat_sys_io_setup /* 245 */ .quad sys_io_destroy .quad compat_sys_io_getevents .quad compat_sys_io_submit .quad sys_io_cancel .quad sys32_fadvise64 /* 250 */ .quad quiet_ni_syscall /* free_huge_pages */ .quad sys_exit_group .quad sys32_lookup_dcookie .quad sys_epoll_create .quad sys_epoll_ctl /* 255 */ .quad sys_epoll_wait .quad sys_remap_file_pages .quad sys_set_tid_address .quad compat_sys_timer_create .quad compat_sys_timer_settime /* 260 */ .quad compat_sys_timer_gettime .quad sys_timer_getoverrun .quad sys_timer_delete .quad compat_sys_clock_settime .quad compat_sys_clock_gettime /* 265 */ .quad compat_sys_clock_getres .quad compat_sys_clock_nanosleep .quad compat_sys_statfs64 .quad compat_sys_fstatfs64 .quad sys_tgkill /* 270 */ .quad compat_sys_utimes .quad sys32_fadvise64_64 .quad quiet_ni_syscall /* sys_vserver */ .quad sys_mbind .quad compat_sys_get_mempolicy /* 275 */ .quad sys_set_mempolicy .quad compat_sys_mq_open .quad sys_mq_unlink .quad compat_sys_mq_timedsend .quad compat_sys_mq_timedreceive /* 280 */ .quad compat_sys_mq_notify .quad compat_sys_mq_getsetattr .quad compat_sys_kexec_load /* reserved for kexec */ .quad compat_sys_waitid .quad quiet_ni_syscall /* 285: sys_altroot */ .quad sys_add_key .quad sys_request_key .quad sys_keyctl .quad sys_ioprio_set .quad sys_ioprio_get /* 290 */ .quad sys_inotify_init .quad sys_inotify_add_watch .quad sys_inotify_rm_watch .quad sys_migrate_pages .quad compat_sys_openat /* 295 */ .quad sys_mkdirat .quad sys_mknodat .quad sys_fchownat .quad compat_sys_futimesat .quad sys32_fstatat /* 300 */ .quad sys_unlinkat .quad sys_renameat .quad sys_linkat .quad sys_symlinkat .quad sys_readlinkat /* 305 */ .quad sys_fchmodat .quad sys_faccessat .quad compat_sys_pselect6 .quad compat_sys_ppoll .quad sys_unshare /* 310 */ .quad compat_sys_set_robust_list .quad compat_sys_get_robust_list .quad sys_splice .quad sys32_sync_file_range .quad sys_tee /* 315 */ .quad compat_sys_vmsplice .quad compat_sys_move_pages .quad sys_getcpu .quad sys_epoll_pwait .quad compat_sys_utimensat /* 320 */ .quad compat_sys_signalfd .quad sys_timerfd_create .quad sys_eventfd .quad sys32_fallocate .quad compat_sys_timerfd_settime /* 325 */ .quad compat_sys_timerfd_gettime .quad compat_sys_signalfd4 .quad sys_eventfd2 .quad sys_epoll_create1 .quad sys_dup3 /* 330 */ .quad sys_pipe2 .quad sys_inotify_init1 .quad compat_sys_preadv .quad compat_sys_pwritev .quad compat_sys_rt_tgsigqueueinfo /* 335 */ .quad sys_perf_event_open .quad compat_sys_recvmmsg ia32_syscall_end: