/* * Freescale QorIQ AHCI SATA platform driver * * Copyright 2015 Freescale, Inc. * Tang Yuantian * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. */ #include #include #include #include #include #include #include #include #include #include #include "ahci.h" #define DRV_NAME "ahci-qoriq" /* port register definition */ #define PORT_PHY1 0xA8 #define PORT_PHY2 0xAC #define PORT_PHY3 0xB0 #define PORT_PHY4 0xB4 #define PORT_PHY5 0xB8 #define PORT_TRANS 0xC8 /* port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe #define AHCI_PORT_TRANS_CFG 0x08000029 /* for ls1021a */ #define LS1021A_PORT_PHY2 0x28183414 #define LS1021A_PORT_PHY3 0x0e080e06 #define LS1021A_PORT_PHY4 0x064a080b #define LS1021A_PORT_PHY5 0x2aa86470 #define SATA_ECC_DISABLE 0x00020000 enum ahci_qoriq_type { AHCI_LS1021A, AHCI_LS1043A, AHCI_LS2080A, }; struct ahci_qoriq_priv { struct ccsr_ahci *reg_base; enum ahci_qoriq_type type; void __iomem *ecc_addr; }; static const struct of_device_id ahci_qoriq_of_match[] = { { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A}, { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A}, {}, }; MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); void __iomem *port_mmio = ahci_port_base(link->ap); u32 px_cmd, px_is, px_val; struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; bool online; int rc; bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A); DPRINTK("ENTER\n"); ahci_stop_engine(ap); /* * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: * A-009042: The device detection initialization sequence * mistakenly resets some registers. * * Workaround for this is: * The software should read and store PxCMD and PxIS values * before issuing the device detection initialization sequence. * After the sequence is complete, software should restore the * PxCMD and PxIS with the stored values. */ if (ls1021a_workaround) { px_cmd = readl(port_mmio + PORT_CMD); px_is = readl(port_mmio + PORT_IRQ_STAT); } /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); tf.command = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis); rc = sata_link_hardreset(link, timing, deadline, &online, ahci_check_ready); /* restore the PxCMD and PxIS on ls1021 */ if (ls1021a_workaround) { px_val = readl(port_mmio + PORT_CMD); if (px_val != px_cmd) writel(px_cmd, port_mmio + PORT_CMD); px_val = readl(port_mmio + PORT_IRQ_STAT); if (px_val != px_is) writel(px_is, port_mmio + PORT_IRQ_STAT); } hpriv->start_engine(ap); if (online) *class = ahci_dev_classify(ap); DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); return rc; } static struct ata_port_operations ahci_qoriq_ops = { .inherits = &ahci_ops, .hardreset = ahci_qoriq_hardreset, }; static struct ata_port_info ahci_qoriq_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_qoriq_ops, }; static struct scsi_host_template ahci_qoriq_sht = { AHCI_SHT(DRV_NAME), }; static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) { struct ahci_qoriq_priv *qpriv = hpriv->plat_data; void __iomem *reg_base = hpriv->mmio; switch (qpriv->type) { case AHCI_LS1021A: writel(SATA_ECC_DISABLE, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2); writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3); writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4); writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); break; case AHCI_LS1043A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); break; case AHCI_LS2080A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); break; } return 0; } static int ahci_qoriq_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct ahci_qoriq_priv *qoriq_priv; const struct of_device_id *of_id; struct resource *res; int rc; hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); of_id = of_match_node(ahci_qoriq_of_match, np); if (!of_id) return -ENODEV; qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL); if (!qoriq_priv) return -ENOMEM; qoriq_priv->type = (enum ahci_qoriq_type)of_id->data; if (qoriq_priv->type == AHCI_LS1021A) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sata-ecc"); qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res); if (IS_ERR(qoriq_priv->ecc_addr)) return PTR_ERR(qoriq_priv->ecc_addr); } rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; hpriv->plat_data = qoriq_priv; rc = ahci_qoriq_phy_init(hpriv); if (rc) goto disable_resources; /* Workaround for ls2080a */ if (qoriq_priv->type == AHCI_LS2080A) { hpriv->flags |= AHCI_HFLAG_NO_NCQ; ahci_qoriq_port_info.flags &= ~ATA_FLAG_NCQ; } rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info, &ahci_qoriq_sht); if (rc) goto disable_resources; return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } #ifdef CONFIG_PM_SLEEP static int ahci_qoriq_resume(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; int rc; rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; rc = ahci_qoriq_phy_init(hpriv); if (rc) goto disable_resources; rc = ahci_platform_resume_host(dev); if (rc) goto disable_resources; /* We resumed so update PM runtime state */ pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } #endif static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend, ahci_qoriq_resume); static struct platform_driver ahci_qoriq_driver = { .probe = ahci_qoriq_probe, .remove = ata_platform_remove_one, .driver = { .name = DRV_NAME, .of_match_table = ahci_qoriq_of_match, .pm = &ahci_qoriq_pm_ops, }, }; module_platform_driver(ahci_qoriq_driver); MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver"); MODULE_AUTHOR("Tang Yuantian "); MODULE_LICENSE("GPL");