// SPDX-License-Identifier: GPL-2.0-or-later /* * SATA specific part of ATA helper library * * Copyright 2003-2004 Red Hat, Inc. All rights reserved. * Copyright 2003-2004 Jeff Garzik * Copyright 2006 Tejun Heo */ #include #include #include #include #include #include #include #include "libata.h" #include "libata-transport.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned int sata_deb_timing_normal[] = { 5, 100, 2000 }; EXPORT_SYMBOL_GPL(sata_deb_timing_normal); const unsigned int sata_deb_timing_hotplug[] = { 25, 500, 2000 }; EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); const unsigned int sata_deb_timing_long[] = { 100, 2000, 5000 }; EXPORT_SYMBOL_GPL(sata_deb_timing_long); /** * sata_scr_valid - test whether SCRs are accessible * @link: ATA link to test SCR accessibility for * * Test whether SCRs are accessible for @link. * * LOCKING: * None. * * RETURNS: * 1 if SCRs are accessible, 0 otherwise. */ int sata_scr_valid(struct ata_link *link) { struct ata_port *ap = link->ap; return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; } EXPORT_SYMBOL_GPL(sata_scr_valid); /** * sata_scr_read - read SCR register of the specified port * @link: ATA link to read SCR for * @reg: SCR to read * @val: Place to store read value * * Read SCR register @reg of @link into *@val. This function is * guaranteed to succeed if @link is ap->link, the cable type of * the port is SATA and the port implements ->scr_read. * * LOCKING: * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ int sata_scr_read(struct ata_link *link, int reg, u32 *val) { if (ata_is_host_link(link)) { if (sata_scr_valid(link)) return link->ap->ops->scr_read(link, reg, val); return -EOPNOTSUPP; } return sata_pmp_scr_read(link, reg, val); } EXPORT_SYMBOL_GPL(sata_scr_read); /** * sata_scr_write - write SCR register of the specified port * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * * Write @val to SCR register @reg of @link. This function is * guaranteed to succeed if @link is ap->link, the cable type of * the port is SATA and the port implements ->scr_read. * * LOCKING: * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ int sata_scr_write(struct ata_link *link, int reg, u32 val) { if (ata_is_host_link(link)) { if (sata_scr_valid(link)) return link->ap->ops->scr_write(link, reg, val); return -EOPNOTSUPP; } return sata_pmp_scr_write(link, reg, val); } EXPORT_SYMBOL_GPL(sata_scr_write); /** * sata_scr_write_flush - write SCR register of the specified port and flush * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * * This function is identical to sata_scr_write() except that this * function performs flush after writing to the register. * * LOCKING: * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) { if (ata_is_host_link(link)) { int rc; if (sata_scr_valid(link)) { rc = link->ap->ops->scr_write(link, reg, val); if (rc == 0) rc = link->ap->ops->scr_read(link, reg, &val); return rc; } return -EOPNOTSUPP; } return sata_pmp_scr_write(link, reg, val); } EXPORT_SYMBOL_GPL(sata_scr_write_flush); /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure * @tf: Taskfile to convert * @pmp: Port multiplier port * @is_cmd: This FIS is for command * @fis: Buffer into which data will output * * Converts a standard ATA taskfile to a Serial ATA * FIS structure (Register - Host to Device). * * LOCKING: * Inherited from caller. */ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) { fis[0] = 0x27; /* Register - Host to Device FIS */ fis[1] = pmp & 0xf; /* Port multiplier number*/ if (is_cmd) fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */ fis[2] = tf->command; fis[3] = tf->feature; fis[4] = tf->lbal; fis[5] = tf->lbam; fis[6] = tf->lbah; fis[7] = tf->device; fis[8] = tf->hob_lbal; fis[9] = tf->hob_lbam; fis[10] = tf->hob_lbah; fis[11] = tf->hob_feature; fis[12] = tf->nsect; fis[13] = tf->hob_nsect; fis[14] = 0; fis[15] = tf->ctl; fis[16] = tf->auxiliary & 0xff; fis[17] = (tf->auxiliary >> 8) & 0xff; fis[18] = (tf->auxiliary >> 16) & 0xff; fis[19] = (tf->auxiliary >> 24) & 0xff; } EXPORT_SYMBOL_GPL(ata_tf_to_fis); /** * ata_tf_from_fis - Convert SATA FIS to ATA taskfile * @fis: Buffer from which data will be input * @tf: Taskfile to output * * Converts a serial ATA FIS structure to a standard ATA taskfile. * * LOCKING: * Inherited from caller. */ void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) { tf->status = fis[2]; tf->error = fis[3]; tf->lbal = fis[4]; tf->lbam = fis[5]; tf->lbah = fis[6]; tf->device = fis[7]; tf->hob_lbal = fis[8]; tf->hob_lbam = fis[9]; tf->hob_lbah = fis[10]; tf->nsect = fis[12]; tf->hob_nsect = fis[13]; } EXPORT_SYMBOL_GPL(ata_tf_from_fis); /** * sata_link_debounce - debounce SATA phy status * @link: ATA link to debounce SATA phy status for * @params: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * * Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on * some controllers after hot unplugging, this functions waits * until timeout then returns 0 if DET is stable at 1. * * @timeout is further limited by @deadline. The sooner of the * two is used. * * LOCKING: * Kernel thread context (may sleep) * * RETURNS: * 0 on success, -errno on failure. */ int sata_link_debounce(struct ata_link *link, const unsigned int *params, unsigned long deadline) { unsigned int interval = params[0]; unsigned int duration = params[1]; unsigned long last_jiffies, t; u32 last, cur; int rc; t = ata_deadline(jiffies, params[2]); if (time_before(t, deadline)) deadline = t; if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; last = cur; last_jiffies = jiffies; while (1) { ata_msleep(link->ap, interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; /* DET stable? */ if (cur == last) { if (cur == 1 && time_before(jiffies, deadline)) continue; if (time_after(jiffies, ata_deadline(last_jiffies, duration))) return 0; continue; } /* unstable, start over */ last = cur; last_jiffies = jiffies; /* Check deadline. If debouncing failed, return * -EPIPE to tell upper layer to lower link speed. */ if (time_after(jiffies, deadline)) return -EPIPE; } } EXPORT_SYMBOL_GPL(sata_link_debounce); /** * sata_link_resume - resume SATA link * @link: ATA link to resume SATA * @params: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * * Resume SATA phy @link and debounce it. * * LOCKING: * Kernel thread context (may sleep) * * RETURNS: * 0 on success, -errno on failure. */ int sata_link_resume(struct ata_link *link, const unsigned int *params, unsigned long deadline) { int tries = ATA_LINK_RESUME_TRIES; u32 scontrol, serror; int rc; if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; /* * Writes to SControl sometimes get ignored under certain * controllers (ata_piix SIDPR). Make sure DET actually is * cleared. */ do { scontrol = (scontrol & 0x0f0) | 0x300; if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; /* * Some PHYs react badly if SStatus is pounded * immediately after resuming. Delay 200ms before * debouncing. */ if (!(link->flags & ATA_LFLAG_NO_DEBOUNCE_DELAY)) ata_msleep(link->ap, 200); /* is SControl restored correctly? */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; } while ((scontrol & 0xf0f) != 0x300 && --tries); if ((scontrol & 0xf0f) != 0x300) { ata_link_warn(link, "failed to resume link (SControl %X)\n", scontrol); return 0; } if (tries < ATA_LINK_RESUME_TRIES) ata_link_warn(link, "link resume succeeded after %d retries\n", ATA_LINK_RESUME_TRIES - tries); if ((rc = sata_link_debounce(link, params, deadline))) return rc; /* clear SError, some PHYs require this even for SRST to work */ if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) rc = sata_scr_write(link, SCR_ERROR, serror); return rc != -EINVAL ? rc : 0; } EXPORT_SYMBOL_GPL(sata_link_resume); /** * sata_link_scr_lpm - manipulate SControl IPM and SPM fields * @link: ATA link to manipulate SControl for * @policy: LPM policy to configure * @spm_wakeup: initiate LPM transition to active state * * Manipulate the IPM field of the SControl register of @link * according to @policy. If @policy is ATA_LPM_MAX_POWER and * @spm_wakeup is %true, the SPM field is manipulated to wake up * the link. This function also clears PHYRDY_CHG before * returning. * * LOCKING: * EH context. * * RETURNS: * 0 on success, -errno otherwise. */ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup) { struct ata_eh_context *ehc = &link->eh_context; bool woken_up = false; u32 scontrol; int rc; rc = sata_scr_read(link, SCR_CONTROL, &scontrol); if (rc) return rc; switch (policy) { case ATA_LPM_MAX_POWER: /* disable all LPM transitions */ scontrol |= (0x7 << 8); /* initiate transition to active state */ if (spm_wakeup) { scontrol |= (0x4 << 12); woken_up = true; } break; case ATA_LPM_MED_POWER: /* allow LPM to PARTIAL */ scontrol &= ~(0x1 << 8); scontrol |= (0x6 << 8); break; case ATA_LPM_MED_POWER_WITH_DIPM: case ATA_LPM_MIN_POWER_WITH_PARTIAL: case ATA_LPM_MIN_POWER: if (ata_link_nr_enabled(link) > 0) { /* assume no restrictions on LPM transitions */ scontrol &= ~(0x7 << 8); /* * If the controller does not support partial, slumber, * or devsleep, then disallow these transitions. */ if (link->ap->host->flags & ATA_HOST_NO_PART) scontrol |= (0x1 << 8); if (link->ap->host->flags & ATA_HOST_NO_SSC) scontrol |= (0x2 << 8); if (link->ap->host->flags & ATA_HOST_NO_DEVSLP) scontrol |= (0x4 << 8); } else { /* empty port, power off */ scontrol &= ~0xf; scontrol |= (0x1 << 2); } break; default: WARN_ON(1); } rc = sata_scr_write(link, SCR_CONTROL, scontrol); if (rc) return rc; /* give the link time to transit out of LPM state */ if (woken_up) msleep(10); /* clear PHYRDY_CHG from SError */ ehc->i.serror &= ~SERR_PHYRDY_CHG; return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); } EXPORT_SYMBOL_GPL(sata_link_scr_lpm); static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) { struct ata_link *host_link = &link->ap->link; u32 limit, target, spd; limit = link->sata_spd_limit; /* Don't configure downstream link faster than upstream link. * It doesn't speed up anything and some PMPs choke on such * configuration. */ if (!ata_is_host_link(link) && host_link->sata_spd) limit &= (1 << host_link->sata_spd) - 1; if (limit == UINT_MAX) target = 0; else target = fls(limit); spd = (*scontrol >> 4) & 0xf; *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); return spd != target; } /** * sata_set_spd_needed - is SATA spd configuration needed * @link: Link in question * * Test whether the spd limit in SControl matches * @link->sata_spd_limit. This function is used to determine * whether hardreset is necessary to apply SATA spd * configuration. * * LOCKING: * Inherited from caller. * * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ static int sata_set_spd_needed(struct ata_link *link) { u32 scontrol; if (sata_scr_read(link, SCR_CONTROL, &scontrol)) return 1; return __sata_set_spd_needed(link, &scontrol); } /** * sata_set_spd - set SATA spd according to spd limit * @link: Link to set SATA spd for * * Set SATA spd of @link according to sata_spd_limit. * * LOCKING: * Inherited from caller. * * RETURNS: * 0 if spd doesn't need to be changed, 1 if spd has been * changed. Negative errno if SCR registers are inaccessible. */ int sata_set_spd(struct ata_link *link) { u32 scontrol; int rc; if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; if (!__sata_set_spd_needed(link, &scontrol)) return 0; if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; return 1; } EXPORT_SYMBOL_GPL(sata_set_spd); /** * sata_link_hardreset - reset link via SATA phy reset * @link: link to reset * @timing: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * @online: optional out parameter indicating link onlineness * @check_ready: optional callback to check link readiness * * SATA phy-reset @link using DET bits of SControl register. * After hardreset, link readiness is waited upon using * ata_wait_ready() if @check_ready is specified. LLDs are * allowed to not specify @check_ready and wait itself after this * function returns. Device classification is LLD's * responsibility. * * *@online is set to one iff reset succeeded and @link is online * after reset. * * LOCKING: * Kernel thread context (may sleep) * * RETURNS: * 0 on success, -errno otherwise. */ int sata_link_hardreset(struct ata_link *link, const unsigned int *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)) { u32 scontrol; int rc; if (online) *online = false; if (sata_set_spd_needed(link)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during * reconfiguration. This works for at least ICH7 AHCI * and Sil3124. */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x304; if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) goto out; sata_set_spd(link); } /* issue phy wake/reset */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x301; if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) goto out; /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ ata_msleep(link->ap, 1); /* bring link back */ rc = sata_link_resume(link, timing, deadline); if (rc) goto out; /* if link is offline nothing more to do */ if (ata_phys_link_offline(link)) goto out; /* Link is online. From this point, -ENODEV too is an error. */ if (online) *online = true; if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { /* If PMP is supported, we have to do follow-up SRST. * Some PMPs don't send D2H Reg FIS after hardreset if * the first port is empty. Wait only for * ATA_TMOUT_PMP_SRST_WAIT. */ if (check_ready) { unsigned long pmp_deadline; pmp_deadline = ata_deadline(jiffies, ATA_TMOUT_PMP_SRST_WAIT); if (time_after(pmp_deadline, deadline)) pmp_deadline = deadline; ata_wait_ready(link, pmp_deadline, check_ready); } rc = -EAGAIN; goto out; } rc = 0; if (check_ready) rc = ata_wait_ready(link, deadline, check_ready); out: if (rc && rc != -EAGAIN) { /* online is set iff link is online && reset succeeded */ if (online) *online = false; } return rc; } EXPORT_SYMBOL_GPL(sata_link_hardreset); /** * ata_qc_complete_multiple - Complete multiple qcs successfully * @ap: port in question * @qc_active: new qc_active mask * * Complete in-flight commands. This functions is meant to be * called from low-level driver's interrupt routine to complete * requests normally. ap->qc_active and @qc_active is compared * and commands are completed accordingly. * * Always use this function when completing multiple NCQ commands * from IRQ handlers instead of calling ata_qc_complete() * multiple times to keep IRQ expect status properly in sync. * * LOCKING: * spin_lock_irqsave(host lock) * * RETURNS: * Number of completed commands on success, -errno otherwise. */ int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active) { u64 done_mask, ap_qc_active = ap->qc_active; int nr_done = 0; /* * If the internal tag is set on ap->qc_active, then we care about * bit0 on the passed in qc_active mask. Move that bit up to match * the internal tag. */ if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) { qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL; qc_active ^= qc_active & 0x01; } done_mask = ap_qc_active ^ qc_active; if (unlikely(done_mask & qc_active)) { ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n", ap->qc_active, qc_active); return -EINVAL; } if (ap->ops->qc_ncq_fill_rtf) ap->ops->qc_ncq_fill_rtf(ap, done_mask); while (done_mask) { struct ata_queued_cmd *qc; unsigned int tag = __ffs64(done_mask); qc = ata_qc_from_tag(ap, tag); if (qc) { ata_qc_complete(qc); nr_done++; } done_mask &= ~(1ULL << tag); } return nr_done; } EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); /** * ata_slave_link_init - initialize slave link * @ap: port to initialize slave link for * * Create and initialize slave link for @ap. This enables slave * link handling on the port. * * In libata, a port contains links and a link contains devices. * There is single host link but if a PMP is attached to it, * there can be multiple fan-out links. On SATA, there's usually * a single device connected to a link but PATA and SATA * controllers emulating TF based interface can have two - master * and slave. * * However, there are a few controllers which don't fit into this * abstraction too well - SATA controllers which emulate TF * interface with both master and slave devices but also have * separate SCR register sets for each device. These controllers * need separate links for physical link handling * (e.g. onlineness, link speed) but should be treated like a * traditional M/S controller for everything else (e.g. command * issue, softreset). * * slave_link is libata's way of handling this class of * controllers without impacting core layer too much. For * anything other than physical link handling, the default host * link is used for both master and slave. For physical link * handling, separate @ap->slave_link is used. All dirty details * are implemented inside libata core layer. From LLD's POV, the * only difference is that prereset, hardreset and postreset are * called once more for the slave link, so the reset sequence * looks like the following. * * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> * softreset(M) -> postreset(M) -> postreset(S) * * Note that softreset is called only for the master. Softreset * resets both M/S by definition, so SRST on master should handle * both (the standard method will work just fine). * * LOCKING: * Should be called before host is registered. * * RETURNS: * 0 on success, -errno on failure. */ int ata_slave_link_init(struct ata_port *ap) { struct ata_link *link; WARN_ON(ap->slave_link); WARN_ON(ap->flags & ATA_FLAG_PMP); link = kzalloc(sizeof(*link), GFP_KERNEL); if (!link) return -ENOMEM; ata_link_init(ap, link, 1); ap->slave_link = link; return 0; } EXPORT_SYMBOL_GPL(ata_slave_link_init); /** * sata_lpm_ignore_phy_events - test if PHY event should be ignored * @link: Link receiving the event * * Test whether the received PHY event has to be ignored or not. * * LOCKING: * None: * * RETURNS: * True if the event has to be ignored. */ bool sata_lpm_ignore_phy_events(struct ata_link *link) { unsigned long lpm_timeout = link->last_lpm_change + msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); /* if LPM is enabled, PHYRDY doesn't mean anything */ if (link->lpm_policy > ATA_LPM_MAX_POWER) return true; /* ignore the first PHY event after the LPM policy changed * as it is might be spurious */ if ((link->flags & ATA_LFLAG_CHANGED) && time_before(jiffies, lpm_timeout)) return true; return false; } EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); static const char *ata_lpm_policy_names[] = { [ATA_LPM_UNKNOWN] = "keep_firmware_settings", [ATA_LPM_MAX_POWER] = "max_performance", [ATA_LPM_MED_POWER] = "medium_power", [ATA_LPM_MED_POWER_WITH_DIPM] = "med_power_with_dipm", [ATA_LPM_MIN_POWER_WITH_PARTIAL] = "min_power_with_partial", [ATA_LPM_MIN_POWER] = "min_power", }; static ssize_t ata_scsi_lpm_store(struct device *device, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(device); struct ata_port *ap = ata_shost_to_port(shost); struct ata_link *link; struct ata_device *dev; enum ata_lpm_policy policy; unsigned long flags; /* UNKNOWN is internal state, iterate from MAX_POWER */ for (policy = ATA_LPM_MAX_POWER; policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) { const char *name = ata_lpm_policy_names[policy]; if (strncmp(name, buf, strlen(name)) == 0) break; } if (policy == ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; spin_lock_irqsave(ap->lock, flags); ata_for_each_link(link, ap, EDGE) { ata_for_each_dev(dev, &ap->link, ENABLED) { if (dev->horkage & ATA_HORKAGE_NOLPM) { count = -EOPNOTSUPP; goto out_unlock; } } } ap->target_lpm_policy = policy; ata_port_schedule_eh(ap); out_unlock: spin_unlock_irqrestore(ap->lock, flags); return count; } static ssize_t ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; return sysfs_emit(buf, "%s\n", ata_lpm_policy_names[ap->target_lpm_policy]); } DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, ata_scsi_lpm_show, ata_scsi_lpm_store); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); /** * ata_ncq_prio_supported - Check if device supports NCQ Priority * @ap: ATA port of the target device * @sdev: SCSI device * @supported: Address of a boolean to store the result * * Helper to check if device supports NCQ Priority feature. * * Context: Any context. Takes and releases @ap->lock. * * Return: * * %0 - OK. Status is stored into @supported * * %-ENODEV - Failed to find the ATA device */ int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev, bool *supported) { struct ata_device *dev; unsigned long flags; int rc = 0; spin_lock_irqsave(ap->lock, flags); dev = ata_scsi_find_dev(ap, sdev); if (!dev) rc = -ENODEV; else *supported = dev->flags & ATA_DFLAG_NCQ_PRIO; spin_unlock_irqrestore(ap->lock, flags); return rc; } EXPORT_SYMBOL_GPL(ata_ncq_prio_supported); static ssize_t ata_ncq_prio_supported_show(struct device *device, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(device); struct ata_port *ap = ata_shost_to_port(sdev->host); bool supported; int rc; rc = ata_ncq_prio_supported(ap, sdev, &supported); if (rc) return rc; return sysfs_emit(buf, "%d\n", supported); } DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL); EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported); /** * ata_ncq_prio_enabled - Check if NCQ Priority is enabled * @ap: ATA port of the target device * @sdev: SCSI device * @enabled: Address of a boolean to store the result * * Helper to check if NCQ Priority feature is enabled. * * Context: Any context. Takes and releases @ap->lock. * * Return: * * %0 - OK. Status is stored into @enabled * * %-ENODEV - Failed to find the ATA device */ int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev, bool *enabled) { struct ata_device *dev; unsigned long flags; int rc = 0; spin_lock_irqsave(ap->lock, flags); dev = ata_scsi_find_dev(ap, sdev); if (!dev) rc = -ENODEV; else *enabled = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED; spin_unlock_irqrestore(ap->lock, flags); return rc; } EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled); static ssize_t ata_ncq_prio_enable_show(struct device *device, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(device); struct ata_port *ap = ata_shost_to_port(sdev->host); bool enabled; int rc; rc = ata_ncq_prio_enabled(ap, sdev, &enabled); if (rc) return rc; return sysfs_emit(buf, "%d\n", enabled); } /** * ata_ncq_prio_enable - Enable/disable NCQ Priority * @ap: ATA port of the target device * @sdev: SCSI device * @enable: true - enable NCQ Priority, false - disable NCQ Priority * * Helper to enable/disable NCQ Priority feature. * * Context: Any context. Takes and releases @ap->lock. * * Return: * * %0 - OK. Status is stored into @enabled * * %-ENODEV - Failed to find the ATA device * * %-EINVAL - NCQ Priority is not supported or CDL is enabled */ int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, bool enable) { struct ata_device *dev; unsigned long flags; int rc = 0; spin_lock_irqsave(ap->lock, flags); dev = ata_scsi_find_dev(ap, sdev); if (!dev) { rc = -ENODEV; goto unlock; } if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { rc = -EINVAL; goto unlock; } if (enable) { if (dev->flags & ATA_DFLAG_CDL_ENABLED) { ata_dev_err(dev, "CDL must be disabled to enable NCQ priority\n"); rc = -EINVAL; goto unlock; } dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLED; } else { dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLED; } unlock: spin_unlock_irqrestore(ap->lock, flags); return rc; } EXPORT_SYMBOL_GPL(ata_ncq_prio_enable); static ssize_t ata_ncq_prio_enable_store(struct device *device, struct device_attribute *attr, const char *buf, size_t len) { struct scsi_device *sdev = to_scsi_device(device); struct ata_port *ap = ata_shost_to_port(sdev->host); bool enable; int rc; rc = kstrtobool(buf, &enable); if (rc) return rc; rc = ata_ncq_prio_enable(ap, sdev, enable); if (rc) return rc; return len; } DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR, ata_ncq_prio_enable_show, ata_ncq_prio_enable_store); EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_enable); static struct attribute *ata_ncq_sdev_attrs[] = { &dev_attr_unload_heads.attr, &dev_attr_ncq_prio_enable.attr, &dev_attr_ncq_prio_supported.attr, NULL }; static const struct attribute_group ata_ncq_sdev_attr_group = { .attrs = ata_ncq_sdev_attrs }; const struct attribute_group *ata_ncq_sdev_groups[] = { &ata_ncq_sdev_attr_group, NULL }; EXPORT_SYMBOL_GPL(ata_ncq_sdev_groups); static ssize_t ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) return ap->ops->em_store(ap, buf, count); return -EINVAL; } static ssize_t ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) return ap->ops->em_show(ap, buf); return -EINVAL; } DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, ata_scsi_em_message_show, ata_scsi_em_message_store); EXPORT_SYMBOL_GPL(dev_attr_em_message); static ssize_t ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); return sysfs_emit(buf, "%d\n", ap->em_message_type); } DEVICE_ATTR(em_message_type, S_IRUGO, ata_scsi_em_message_type_show, NULL); EXPORT_SYMBOL_GPL(dev_attr_em_message_type); static ssize_t ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); if (atadev && ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY)) return ap->ops->sw_activity_show(atadev, buf); return -EINVAL; } static ssize_t ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct scsi_device *sdev = to_scsi_device(dev); struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); enum sw_activity val; int rc; if (atadev && ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) { val = simple_strtoul(buf, NULL, 0); switch (val) { case OFF: case BLINK_ON: case BLINK_OFF: rc = ap->ops->sw_activity_store(atadev, val); if (!rc) return count; else return rc; } } return -EINVAL; } DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, ata_scsi_activity_store); EXPORT_SYMBOL_GPL(dev_attr_sw_activity); /** * ata_change_queue_depth - Set a device maximum queue depth * @ap: ATA port of the target device * @sdev: SCSI device to configure queue depth for * @queue_depth: new queue depth * * Helper to set a device maximum queue depth, usable with both libsas * and libata. * */ int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, int queue_depth) { struct ata_device *dev; unsigned long flags; int max_queue_depth; spin_lock_irqsave(ap->lock, flags); dev = ata_scsi_find_dev(ap, sdev); if (!dev || queue_depth < 1 || queue_depth == sdev->queue_depth) { spin_unlock_irqrestore(ap->lock, flags); return sdev->queue_depth; } /* * Make sure that the queue depth requested does not exceed the device * capabilities. */ max_queue_depth = min(ATA_MAX_QUEUE, sdev->host->can_queue); max_queue_depth = min(max_queue_depth, ata_id_queue_depth(dev->id)); if (queue_depth > max_queue_depth) { spin_unlock_irqrestore(ap->lock, flags); return -EINVAL; } /* * If NCQ is not supported by the device or if the target queue depth * is 1 (to disable drive side command queueing), turn off NCQ. */ if (queue_depth == 1 || !ata_ncq_supported(dev)) { dev->flags |= ATA_DFLAG_NCQ_OFF; queue_depth = 1; } else { dev->flags &= ~ATA_DFLAG_NCQ_OFF; } spin_unlock_irqrestore(ap->lock, flags); if (queue_depth == sdev->queue_depth) return sdev->queue_depth; return scsi_change_queue_depth(sdev, queue_depth); } EXPORT_SYMBOL_GPL(ata_change_queue_depth); /** * ata_scsi_change_queue_depth - SCSI callback for queue depth config * @sdev: SCSI device to configure queue depth for * @queue_depth: new queue depth * * This is libata standard hostt->change_queue_depth callback. * SCSI will call into this callback when user tries to set queue * depth via sysfs. * * LOCKING: * SCSI layer (we don't care) * * RETURNS: * Newly configured queue depth. */ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) { struct ata_port *ap = ata_shost_to_port(sdev->host); return ata_change_queue_depth(ap, sdev, queue_depth); } EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); /** * ata_sas_device_configure - Default device_configure routine for libata * devices * @sdev: SCSI device to configure * @lim: queue limits * @ap: ATA port to which SCSI device is attached * * RETURNS: * Zero. */ int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim, struct ata_port *ap) { ata_scsi_sdev_config(sdev); return ata_scsi_dev_config(sdev, lim, ap->link.device); } EXPORT_SYMBOL_GPL(ata_sas_device_configure); /** * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device * @cmd: SCSI command to be sent * @ap: ATA port to which the command is being sent * * RETURNS: * Return value from __ata_scsi_queuecmd() if @cmd can be queued, * 0 otherwise. */ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) { int rc = 0; if (likely(ata_dev_enabled(ap->link.device))) rc = __ata_scsi_queuecmd(cmd, ap->link.device); else { cmd->result = (DID_BAD_TARGET << 16); scsi_done(cmd); } return rc; } EXPORT_SYMBOL_GPL(ata_sas_queuecmd); /** * sata_async_notification - SATA async notification handler * @ap: ATA port where async notification is received * * Handler to be called when async notification via SDB FIS is * received. This function schedules EH if necessary. * * LOCKING: * spin_lock_irqsave(host lock) * * RETURNS: * 1 if EH is scheduled, 0 otherwise. */ int sata_async_notification(struct ata_port *ap) { u32 sntf; int rc; if (!(ap->flags & ATA_FLAG_AN)) return 0; rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); if (rc == 0) sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); if (!sata_pmp_attached(ap) || rc) { /* PMP is not attached or SNTF is not available */ if (!sata_pmp_attached(ap)) { /* PMP is not attached. Check whether ATAPI * AN is configured. If so, notify media * change. */ struct ata_device *dev = ap->link.device; if ((dev->class == ATA_DEV_ATAPI) && (dev->flags & ATA_DFLAG_AN)) ata_scsi_media_change_notify(dev); return 0; } else { /* PMP is attached but SNTF is not available. * ATAPI async media change notification is * not used. The PMP must be reporting PHY * status change, schedule EH. */ ata_port_schedule_eh(ap); return 1; } } else { /* PMP is attached and SNTF is available */ struct ata_link *link; /* check and notify ATAPI AN */ ata_for_each_link(link, ap, EDGE) { if (!(sntf & (1 << link->pmp))) continue; if ((link->device->class == ATA_DEV_ATAPI) && (link->device->flags & ATA_DFLAG_AN)) ata_scsi_media_change_notify(link->device); } /* If PMP is reporting that PHY status of some * downstream ports has changed, schedule EH. */ if (sntf & (1 << SATA_PMP_CTRL_PORT)) { ata_port_schedule_eh(ap); return 1; } return 0; } } EXPORT_SYMBOL_GPL(sata_async_notification); /** * ata_eh_read_log_10h - Read log page 10h for NCQ error details * @dev: Device to read log page 10h from * @tag: Resulting tag of the failed command * @tf: Resulting taskfile registers of the failed command * * Read log page 10h to obtain NCQ error details and clear error * condition. * * LOCKING: * Kernel thread context (may sleep). * * RETURNS: * 0 on success, -errno otherwise. */ static int ata_eh_read_log_10h(struct ata_device *dev, int *tag, struct ata_taskfile *tf) { u8 *buf = dev->link->ap->sector_buf; unsigned int err_mask; u8 csum; int i; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1); if (err_mask) return -EIO; csum = 0; for (i = 0; i < ATA_SECT_SIZE; i++) csum += buf[i]; if (csum) ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n", csum); if (buf[0] & 0x80) return -ENOENT; *tag = buf[0] & 0x1f; tf->status = buf[2]; tf->error = buf[3]; tf->lbal = buf[4]; tf->lbam = buf[5]; tf->lbah = buf[6]; tf->device = buf[7]; tf->hob_lbal = buf[8]; tf->hob_lbam = buf[9]; tf->hob_lbah = buf[10]; tf->nsect = buf[12]; tf->hob_nsect = buf[13]; if (ata_id_has_ncq_autosense(dev->id) && (tf->status & ATA_SENSE)) tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16]; return 0; } /** * ata_eh_read_sense_success_ncq_log - Read the sense data for successful * NCQ commands log * @link: ATA link to get sense data for * * Read the sense data for successful NCQ commands log page to obtain * sense data for all NCQ commands that completed successfully with * the sense data available bit set. * * LOCKING: * Kernel thread context (may sleep). * * RETURNS: * 0 on success, -errno otherwise. */ int ata_eh_read_sense_success_ncq_log(struct ata_link *link) { struct ata_device *dev = link->device; struct ata_port *ap = dev->link->ap; u8 *buf = ap->ncq_sense_buf; struct ata_queued_cmd *qc; unsigned int err_mask, tag; u8 *sense, sk = 0, asc = 0, ascq = 0; u64 sense_valid, val; int ret = 0; err_mask = ata_read_log_page(dev, ATA_LOG_SENSE_NCQ, 0, buf, 2); if (err_mask) { ata_dev_err(dev, "Failed to read Sense Data for Successful NCQ Commands log\n"); return -EIO; } /* Check the log header */ val = get_unaligned_le64(&buf[0]); if ((val & 0xffff) != 1 || ((val >> 16) & 0xff) != 0x0f) { ata_dev_err(dev, "Invalid Sense Data for Successful NCQ Commands log\n"); return -EIO; } sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) | ((u64)buf[10] << 16) | ((u64)buf[11] << 24); ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_EH) || !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) || qc->err_mask || ata_dev_phys_link(qc->dev) != link) continue; /* * If the command does not have any sense data, clear ATA_SENSE. * Keep ATA_QCFLAG_EH_SUCCESS_CMD so that command is finished. */ if (!(sense_valid & (1ULL << tag))) { qc->result_tf.status &= ~ATA_SENSE; continue; } sense = &buf[32 + 24 * tag]; sk = sense[0]; asc = sense[1]; ascq = sense[2]; if (!ata_scsi_sense_is_valid(sk, asc, ascq)) { ret = -EIO; continue; } /* Set sense without also setting scsicmd->result */ scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE, qc->scsicmd->sense_buffer, sk, asc, ascq); qc->flags |= ATA_QCFLAG_SENSE_VALID; /* * If we have sense data, call scsi_check_sense() in order to * set the correct SCSI ML byte (if any). No point in checking * the return value, since the command has already completed * successfully. */ scsi_check_sense(qc->scsicmd); } return ret; } EXPORT_SYMBOL_GPL(ata_eh_read_sense_success_ncq_log); /** * ata_eh_analyze_ncq_error - analyze NCQ error * @link: ATA link to analyze NCQ error for * * Read log page 10h, determine the offending qc and acquire * error status TF. For NCQ device errors, all LLDDs have to do * is setting AC_ERR_DEV in ehi->err_mask. This function takes * care of the rest. * * LOCKING: * Kernel thread context (may sleep). */ void ata_eh_analyze_ncq_error(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev = link->device; struct ata_queued_cmd *qc; struct ata_taskfile tf; int tag, rc; /* if frozen, we can't do much */ if (ata_port_is_frozen(ap)) return; /* is it NCQ device error? */ if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) return; /* has LLDD analyzed already? */ ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_EH)) continue; if (qc->err_mask) return; } /* okay, this error is ours */ memset(&tf, 0, sizeof(tf)); rc = ata_eh_read_log_10h(dev, &tag, &tf); if (rc) { ata_link_err(link, "failed to read log page 10h (errno=%d)\n", rc); return; } if (!(link->sactive & (1 << tag))) { ata_link_err(link, "log page 10h reported inactive tag %d\n", tag); return; } /* we've got the perpetrator, condemn it */ qc = __ata_qc_from_tag(ap, tag); memcpy(&qc->result_tf, &tf, sizeof(tf)); qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; /* * If the device supports NCQ autosense, ata_eh_read_log_10h() will have * stored the sense data in qc->result_tf.auxiliary. */ if (qc->result_tf.auxiliary) { char sense_key, asc, ascq; sense_key = (qc->result_tf.auxiliary >> 16) & 0xff; asc = (qc->result_tf.auxiliary >> 8) & 0xff; ascq = qc->result_tf.auxiliary & 0xff; if (ata_scsi_sense_is_valid(sense_key, asc, ascq)) { ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc, ascq); ata_scsi_set_sense_information(dev, qc->scsicmd, &qc->result_tf); qc->flags |= ATA_QCFLAG_SENSE_VALID; } } ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_EH) || qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD || ata_dev_phys_link(qc->dev) != link) continue; /* Skip the single QC which caused the NCQ error. */ if (qc->err_mask) continue; /* * For SATA, the STATUS and ERROR fields are shared for all NCQ * commands that were completed with the same SDB FIS. * Therefore, we have to clear the ATA_ERR bit for all QCs * except the one that caused the NCQ error. */ qc->result_tf.status &= ~ATA_ERR; qc->result_tf.error = 0; /* * If we get a NCQ error, that means that a single command was * aborted. All other failed commands for our link should be * retried and has no business of going though further scrutiny * by ata_eh_link_autopsy(). */ qc->flags |= ATA_QCFLAG_RETRY; } ehc->i.err_mask &= ~AC_ERR_DEV; } EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);