// SPDX-License-Identifier: GPL-2.0 /* * V4L2 sensor driver for Aptina MT9V111 image sensor * Copyright (C) 2018 Jacopo Mondi * * Based on mt9v032 driver * Copyright (C) 2010, Laurent Pinchart * Copyright (C) 2008, Guennadi Liakhovetski * * Based on mt9v011 driver * Copyright (c) 2009 Mauro Carvalho Chehab */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * MT9V111 is a 1/4-Inch CMOS digital image sensor with an integrated * Image Flow Processing (IFP) engine and a sensor core loosely based on * MT9V011. * * The IFP can produce several output image formats from the sensor core * output. This driver currently supports only YUYV format permutations. * * The driver allows manual frame rate control through set_frame_interval subdev * operation or V4L2_CID_V/HBLANK controls, but it is known that the * auto-exposure algorithm might modify the programmed frame rate. While the * driver initially programs the sensor with auto-exposure and * auto-white-balancing enabled, it is possible to disable them and more * precisely control the frame rate. * * While it seems possible to instruct the auto-exposure control algorithm to * respect a programmed frame rate when adjusting the pixel integration time, * registers controlling this feature are not documented in the public * available sensor manual used to develop this driver (09005aef80e90084, * MT9V111_1.fm - Rev. G 1/05 EN). */ #define MT9V111_CHIP_ID_HIGH 0x82 #define MT9V111_CHIP_ID_LOW 0x3a #define MT9V111_R01_ADDR_SPACE 0x01 #define MT9V111_R01_IFP 0x01 #define MT9V111_R01_CORE 0x04 #define MT9V111_IFP_R06_OPMODE_CTRL 0x06 #define MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN BIT(1) #define MT9V111_IFP_R06_OPMODE_CTRL_AE_EN BIT(14) #define MT9V111_IFP_R07_IFP_RESET 0x07 #define MT9V111_IFP_R07_IFP_RESET_MASK BIT(0) #define MT9V111_IFP_R08_OUTFMT_CTRL 0x08 #define MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER BIT(11) #define MT9V111_IFP_R08_OUTFMT_CTRL_PCLK BIT(5) #define MT9V111_IFP_R3A_OUTFMT_CTRL2 0x3a #define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR BIT(0) #define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC BIT(1) #define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK GENMASK(2, 0) #define MT9V111_IFP_RA5_HPAN 0xa5 #define MT9V111_IFP_RA6_HZOOM 0xa6 #define MT9V111_IFP_RA7_HOUT 0xa7 #define MT9V111_IFP_RA8_VPAN 0xa8 #define MT9V111_IFP_RA9_VZOOM 0xa9 #define MT9V111_IFP_RAA_VOUT 0xaa #define MT9V111_IFP_DECIMATION_MASK GENMASK(9, 0) #define MT9V111_IFP_DECIMATION_FREEZE BIT(15) #define MT9V111_CORE_R03_WIN_HEIGHT 0x03 #define MT9V111_CORE_R03_WIN_V_OFFS 2 #define MT9V111_CORE_R04_WIN_WIDTH 0x04 #define MT9V111_CORE_R04_WIN_H_OFFS 114 #define MT9V111_CORE_R05_HBLANK 0x05 #define MT9V111_CORE_R05_MIN_HBLANK 0x09 #define MT9V111_CORE_R05_MAX_HBLANK GENMASK(9, 0) #define MT9V111_CORE_R05_DEF_HBLANK 0x26 #define MT9V111_CORE_R06_VBLANK 0x06 #define MT9V111_CORE_R06_MIN_VBLANK 0x03 #define MT9V111_CORE_R06_MAX_VBLANK GENMASK(11, 0) #define MT9V111_CORE_R06_DEF_VBLANK 0x04 #define MT9V111_CORE_R07_OUT_CTRL 0x07 #define MT9V111_CORE_R07_OUT_CTRL_SAMPLE BIT(4) #define MT9V111_CORE_R09_PIXEL_INT 0x09 #define MT9V111_CORE_R09_PIXEL_INT_MASK GENMASK(11, 0) #define MT9V111_CORE_R0D_CORE_RESET 0x0d #define MT9V111_CORE_R0D_CORE_RESET_MASK BIT(0) #define MT9V111_CORE_RFF_CHIP_VER 0xff #define MT9V111_PIXEL_ARRAY_WIDTH 640 #define MT9V111_PIXEL_ARRAY_HEIGHT 480 #define MT9V111_MAX_CLKIN 27000000 /* The default sensor configuration at startup time. */ static const struct v4l2_mbus_framefmt mt9v111_def_fmt = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_2X8, .field = V4L2_FIELD_NONE, .colorspace = V4L2_COLORSPACE_SRGB, .ycbcr_enc = V4L2_YCBCR_ENC_601, .quantization = V4L2_QUANTIZATION_LIM_RANGE, .xfer_func = V4L2_XFER_FUNC_SRGB, }; struct mt9v111_dev { struct device *dev; struct i2c_client *client; u8 addr_space; struct v4l2_subdev sd; struct media_pad pad; struct v4l2_ctrl *auto_awb; struct v4l2_ctrl *auto_exp; struct v4l2_ctrl *hblank; struct v4l2_ctrl *vblank; struct v4l2_ctrl_handler ctrls; /* Output image format and sizes. */ struct v4l2_mbus_framefmt fmt; unsigned int fps; /* Protects power up/down sequences. */ struct mutex pwr_mutex; int pwr_count; /* Protects stream on/off sequences. */ struct mutex stream_mutex; bool streaming; /* Flags to mark HW settings as not yet applied. */ bool pending; /* Clock provider and system clock frequency. */ struct clk *clk; u32 sysclk; struct gpio_desc *oe; struct gpio_desc *standby; struct gpio_desc *reset; }; #define sd_to_mt9v111(__sd) container_of((__sd), struct mt9v111_dev, sd) /* * mt9v111_mbus_fmt - List all media bus formats supported by the driver. * * Only list the media bus code here. The image sizes are freely configurable * in the pixel array sizes range. * * The desired frame interval, in the supported frame interval range, is * obtained by configuring blanking as the sensor does not have a PLL but * only a fixed clock divider that generates the output pixel clock. */ static struct mt9v111_mbus_fmt { u32 code; } mt9v111_formats[] = { { .code = MEDIA_BUS_FMT_UYVY8_2X8, }, { .code = MEDIA_BUS_FMT_YUYV8_2X8, }, { .code = MEDIA_BUS_FMT_VYUY8_2X8, }, { .code = MEDIA_BUS_FMT_YVYU8_2X8, }, }; static u32 mt9v111_frame_intervals[] = {5, 10, 15, 20, 30}; /* * mt9v111_frame_sizes - List sensor's supported resolutions. * * Resolution generated through decimation in the IFP block from the * full VGA pixel array. */ static struct v4l2_rect mt9v111_frame_sizes[] = { { .width = 640, .height = 480, }, { .width = 352, .height = 288 }, { .width = 320, .height = 240, }, { .width = 176, .height = 144, }, { .width = 160, .height = 120, }, }; /* --- Device I/O access --- */ static int __mt9v111_read(struct i2c_client *c, u8 reg, u16 *val) { struct i2c_msg msg[2]; __be16 buf; int ret; msg[0].addr = c->addr; msg[0].flags = 0; msg[0].len = 1; msg[0].buf = ® msg[1].addr = c->addr; msg[1].flags = I2C_M_RD; msg[1].len = 2; msg[1].buf = (char *)&buf; ret = i2c_transfer(c->adapter, msg, 2); if (ret < 0) { dev_err(&c->dev, "i2c read transfer error: %d\n", ret); return ret; } *val = be16_to_cpu(buf); dev_dbg(&c->dev, "%s: %x=%x\n", __func__, reg, *val); return 0; } static int __mt9v111_write(struct i2c_client *c, u8 reg, u16 val) { struct i2c_msg msg; u8 buf[3] = { 0 }; int ret; buf[0] = reg; buf[1] = val >> 8; buf[2] = val & 0xff; msg.addr = c->addr; msg.flags = 0; msg.len = 3; msg.buf = (char *)buf; dev_dbg(&c->dev, "%s: %x = %x%x\n", __func__, reg, buf[1], buf[2]); ret = i2c_transfer(c->adapter, &msg, 1); if (ret < 0) { dev_err(&c->dev, "i2c write transfer error: %d\n", ret); return ret; } return 0; } static int __mt9v111_addr_space_select(struct i2c_client *c, u16 addr_space) { struct v4l2_subdev *sd = i2c_get_clientdata(c); struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); u16 val; int ret; if (mt9v111->addr_space == addr_space) return 0; ret = __mt9v111_write(c, MT9V111_R01_ADDR_SPACE, addr_space); if (ret) return ret; /* Verify address space has been updated */ ret = __mt9v111_read(c, MT9V111_R01_ADDR_SPACE, &val); if (ret) return ret; if (val != addr_space) return -EINVAL; mt9v111->addr_space = addr_space; return 0; } static int mt9v111_read(struct i2c_client *c, u8 addr_space, u8 reg, u16 *val) { int ret; /* Select register address space first. */ ret = __mt9v111_addr_space_select(c, addr_space); if (ret) return ret; ret = __mt9v111_read(c, reg, val); if (ret) return ret; return 0; } static int mt9v111_write(struct i2c_client *c, u8 addr_space, u8 reg, u16 val) { int ret; /* Select register address space first. */ ret = __mt9v111_addr_space_select(c, addr_space); if (ret) return ret; ret = __mt9v111_write(c, reg, val); if (ret) return ret; return 0; } static int mt9v111_update(struct i2c_client *c, u8 addr_space, u8 reg, u16 mask, u16 val) { u16 current_val; int ret; /* Select register address space first. */ ret = __mt9v111_addr_space_select(c, addr_space); if (ret) return ret; /* Read the current register value, then update it. */ ret = __mt9v111_read(c, reg, ¤t_val); if (ret) return ret; current_val &= ~mask; current_val |= (val & mask); ret = __mt9v111_write(c, reg, current_val); if (ret) return ret; return 0; } /* --- Sensor HW operations --- */ static int __mt9v111_power_on(struct v4l2_subdev *sd) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); int ret; ret = clk_prepare_enable(mt9v111->clk); if (ret) return ret; clk_set_rate(mt9v111->clk, mt9v111->sysclk); gpiod_set_value(mt9v111->standby, 0); usleep_range(500, 1000); gpiod_set_value(mt9v111->oe, 1); usleep_range(500, 1000); return 0; } static int __mt9v111_power_off(struct v4l2_subdev *sd) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); gpiod_set_value(mt9v111->oe, 0); usleep_range(500, 1000); gpiod_set_value(mt9v111->standby, 1); usleep_range(500, 1000); clk_disable_unprepare(mt9v111->clk); return 0; } static int __mt9v111_hw_reset(struct mt9v111_dev *mt9v111) { if (!mt9v111->reset) return -EINVAL; gpiod_set_value(mt9v111->reset, 1); usleep_range(500, 1000); gpiod_set_value(mt9v111->reset, 0); usleep_range(500, 1000); return 0; } static int __mt9v111_sw_reset(struct mt9v111_dev *mt9v111) { struct i2c_client *c = mt9v111->client; int ret; /* Software reset core and IFP blocks. */ ret = mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R0D_CORE_RESET, MT9V111_CORE_R0D_CORE_RESET_MASK, 1); if (ret) return ret; usleep_range(500, 1000); ret = mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R0D_CORE_RESET, MT9V111_CORE_R0D_CORE_RESET_MASK, 0); if (ret) return ret; usleep_range(500, 1000); ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R07_IFP_RESET, MT9V111_IFP_R07_IFP_RESET_MASK, 1); if (ret) return ret; usleep_range(500, 1000); ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R07_IFP_RESET, MT9V111_IFP_R07_IFP_RESET_MASK, 0); if (ret) return ret; usleep_range(500, 1000); return 0; } static int mt9v111_calc_frame_rate(struct mt9v111_dev *mt9v111, struct v4l2_fract *tpf) { unsigned int fps = tpf->numerator ? tpf->denominator / tpf->numerator : tpf->denominator; unsigned int best_diff; unsigned int frm_cols; unsigned int row_pclk; unsigned int best_fps; unsigned int pclk; unsigned int diff; unsigned int idx; unsigned int hb; unsigned int vb; unsigned int i; int ret; /* Approximate to the closest supported frame interval. */ best_diff = ~0L; for (i = 0, idx = 0; i < ARRAY_SIZE(mt9v111_frame_intervals); i++) { diff = abs(fps - mt9v111_frame_intervals[i]); if (diff < best_diff) { idx = i; best_diff = diff; } } fps = mt9v111_frame_intervals[idx]; /* * The sensor does not provide a PLL circuitry and pixel clock is * generated dividing the master clock source by two. * * Trow = (W + Hblank + 114) * 2 * (1 / SYSCLK) * TFrame = Trow * (H + Vblank + 2) * * FPS = (SYSCLK / 2) / (Trow * (H + Vblank + 2)) * * This boils down to tune H and V blanks to best approximate the * above equation. * * Test all available H/V blank values, until we reach the * desired frame rate. */ best_fps = vb = hb = 0; pclk = DIV_ROUND_CLOSEST(mt9v111->sysclk, 2); row_pclk = MT9V111_PIXEL_ARRAY_WIDTH + 7 + MT9V111_CORE_R04_WIN_H_OFFS; frm_cols = MT9V111_PIXEL_ARRAY_HEIGHT + 7 + MT9V111_CORE_R03_WIN_V_OFFS; best_diff = ~0L; for (vb = MT9V111_CORE_R06_MIN_VBLANK; vb < MT9V111_CORE_R06_MAX_VBLANK; vb++) { for (hb = MT9V111_CORE_R05_MIN_HBLANK; hb < MT9V111_CORE_R05_MAX_HBLANK; hb += 10) { unsigned int t_frame = (row_pclk + hb) * (frm_cols + vb); unsigned int t_fps = DIV_ROUND_CLOSEST(pclk, t_frame); diff = abs(fps - t_fps); if (diff < best_diff) { best_diff = diff; best_fps = t_fps; if (diff == 0) break; } } if (diff == 0) break; } ret = v4l2_ctrl_s_ctrl_int64(mt9v111->hblank, hb); if (ret) return ret; ret = v4l2_ctrl_s_ctrl_int64(mt9v111->vblank, vb); if (ret) return ret; tpf->numerator = 1; tpf->denominator = best_fps; return 0; } static int mt9v111_hw_config(struct mt9v111_dev *mt9v111) { struct i2c_client *c = mt9v111->client; unsigned int ret; u16 outfmtctrl2; /* Force device reset. */ ret = __mt9v111_hw_reset(mt9v111); if (ret == -EINVAL) ret = __mt9v111_sw_reset(mt9v111); if (ret) return ret; /* Configure internal clock sample rate. */ ret = mt9v111->sysclk < DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R07_OUT_CTRL, MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 1) : mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R07_OUT_CTRL, MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 0); if (ret) return ret; /* * Configure output image format components ordering. * * TODO: IFP block can also output several RGB permutations, we only * support YUYV permutations at the moment. */ switch (mt9v111->fmt.code) { case MEDIA_BUS_FMT_YUYV8_2X8: outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC; break; case MEDIA_BUS_FMT_VYUY8_2X8: outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR; break; case MEDIA_BUS_FMT_YVYU8_2X8: outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC | MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR; break; case MEDIA_BUS_FMT_UYVY8_2X8: default: outfmtctrl2 = 0; break; } ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R3A_OUTFMT_CTRL2, MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK, outfmtctrl2); if (ret) return ret; /* * Do not change default sensor's core configuration: * output the whole 640x480 pixel array, skip 18 columns and 6 rows. * * Instead, control the output image size through IFP block. * * TODO: No zoom&pan support. Currently we control the output image * size only through decimation, with no zoom support. */ ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA5_HPAN, MT9V111_IFP_DECIMATION_FREEZE); if (ret) return ret; ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA8_VPAN, MT9V111_IFP_DECIMATION_FREEZE); if (ret) return ret; ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA6_HZOOM, MT9V111_IFP_DECIMATION_FREEZE | MT9V111_PIXEL_ARRAY_WIDTH); if (ret) return ret; ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA9_VZOOM, MT9V111_IFP_DECIMATION_FREEZE | MT9V111_PIXEL_ARRAY_HEIGHT); if (ret) return ret; ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA7_HOUT, MT9V111_IFP_DECIMATION_FREEZE | mt9v111->fmt.width); if (ret) return ret; ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RAA_VOUT, mt9v111->fmt.height); if (ret) return ret; /* Apply controls to set auto exp, auto awb and timings */ ret = v4l2_ctrl_handler_setup(&mt9v111->ctrls); if (ret) return ret; /* * Set pixel integration time to the whole frame time. * This value controls the shutter delay when running with AE * disabled. If longer than frame time, it affects the output * frame rate. */ return mt9v111_write(c, MT9V111_R01_CORE, MT9V111_CORE_R09_PIXEL_INT, MT9V111_PIXEL_ARRAY_HEIGHT); } /* --- V4L2 subdev operations --- */ static int mt9v111_s_power(struct v4l2_subdev *sd, int on) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); int pwr_count; int ret = 0; mutex_lock(&mt9v111->pwr_mutex); /* * Make sure we're transitioning from 0 to 1, or viceversa, * before actually changing the power state. */ pwr_count = mt9v111->pwr_count; pwr_count += on ? 1 : -1; if (pwr_count == !!on) { ret = on ? __mt9v111_power_on(sd) : __mt9v111_power_off(sd); if (!ret) /* All went well, updated power counter. */ mt9v111->pwr_count = pwr_count; mutex_unlock(&mt9v111->pwr_mutex); return ret; } /* * Update power counter to keep track of how many nested calls we * received. */ WARN_ON(pwr_count < 0 || pwr_count > 1); mt9v111->pwr_count = pwr_count; mutex_unlock(&mt9v111->pwr_mutex); return ret; } static int mt9v111_s_stream(struct v4l2_subdev *subdev, int enable) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); int ret; mutex_lock(&mt9v111->stream_mutex); if (mt9v111->streaming == enable) { mutex_unlock(&mt9v111->stream_mutex); return 0; } ret = mt9v111_s_power(subdev, enable); if (ret) goto error_unlock; if (enable && mt9v111->pending) { ret = mt9v111_hw_config(mt9v111); if (ret) goto error_unlock; /* * No need to update control here as far as only H/VBLANK are * supported and immediately programmed to registers in .s_ctrl */ mt9v111->pending = false; } mt9v111->streaming = enable ? true : false; mutex_unlock(&mt9v111->stream_mutex); return 0; error_unlock: mutex_unlock(&mt9v111->stream_mutex); return ret; } static int mt9v111_set_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval *ival) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); struct v4l2_fract *tpf = &ival->interval; unsigned int fps = tpf->numerator ? tpf->denominator / tpf->numerator : tpf->denominator; unsigned int max_fps; /* * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 * subdev active state API. */ if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; if (!tpf->numerator) tpf->numerator = 1; mutex_lock(&mt9v111->stream_mutex); if (mt9v111->streaming) { mutex_unlock(&mt9v111->stream_mutex); return -EBUSY; } if (mt9v111->fps == fps) { mutex_unlock(&mt9v111->stream_mutex); return 0; } /* Make sure frame rate/image sizes constraints are respected. */ if (mt9v111->fmt.width < QVGA_WIDTH && mt9v111->fmt.height < QVGA_HEIGHT) max_fps = 90; else if (mt9v111->fmt.width < CIF_WIDTH && mt9v111->fmt.height < CIF_HEIGHT) max_fps = 60; else max_fps = mt9v111->sysclk < DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? 15 : 30; if (fps > max_fps) { mutex_unlock(&mt9v111->stream_mutex); return -EINVAL; } mt9v111_calc_frame_rate(mt9v111, tpf); mt9v111->fps = fps; mt9v111->pending = true; mutex_unlock(&mt9v111->stream_mutex); return 0; } static int mt9v111_get_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval *ival) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); struct v4l2_fract *tpf = &ival->interval; /* * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 * subdev active state API. */ if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; mutex_lock(&mt9v111->stream_mutex); tpf->numerator = 1; tpf->denominator = mt9v111->fps; mutex_unlock(&mt9v111->stream_mutex); return 0; } static struct v4l2_mbus_framefmt *__mt9v111_get_pad_format( struct mt9v111_dev *mt9v111, struct v4l2_subdev_state *sd_state, unsigned int pad, enum v4l2_subdev_format_whence which) { switch (which) { case V4L2_SUBDEV_FORMAT_TRY: return v4l2_subdev_state_get_format(sd_state, pad); case V4L2_SUBDEV_FORMAT_ACTIVE: return &mt9v111->fmt; default: return NULL; } } static int mt9v111_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { if (code->pad || code->index > ARRAY_SIZE(mt9v111_formats) - 1) return -EINVAL; code->code = mt9v111_formats[code->index].code; return 0; } static int mt9v111_enum_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval_enum *fie) { unsigned int i; if (fie->pad || fie->index >= ARRAY_SIZE(mt9v111_frame_intervals)) return -EINVAL; for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) if (fie->width == mt9v111_frame_sizes[i].width && fie->height == mt9v111_frame_sizes[i].height) break; if (i == ARRAY_SIZE(mt9v111_frame_sizes)) return -EINVAL; fie->interval.numerator = 1; fie->interval.denominator = mt9v111_frame_intervals[fie->index]; return 0; } static int mt9v111_enum_frame_size(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fse) { if (fse->pad || fse->index >= ARRAY_SIZE(mt9v111_frame_sizes)) return -EINVAL; fse->min_width = mt9v111_frame_sizes[fse->index].width; fse->max_width = mt9v111_frame_sizes[fse->index].width; fse->min_height = mt9v111_frame_sizes[fse->index].height; fse->max_height = mt9v111_frame_sizes[fse->index].height; return 0; } static int mt9v111_get_format(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); if (format->pad) return -EINVAL; mutex_lock(&mt9v111->stream_mutex); format->format = *__mt9v111_get_pad_format(mt9v111, sd_state, format->pad, format->which); mutex_unlock(&mt9v111->stream_mutex); return 0; } static int mt9v111_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); struct v4l2_mbus_framefmt new_fmt; struct v4l2_mbus_framefmt *__fmt; unsigned int best_fit = ~0L; unsigned int idx = 0; unsigned int i; mutex_lock(&mt9v111->stream_mutex); if (mt9v111->streaming) { mutex_unlock(&mt9v111->stream_mutex); return -EBUSY; } if (format->pad) { mutex_unlock(&mt9v111->stream_mutex); return -EINVAL; } /* Update mbus format code and sizes. */ for (i = 0; i < ARRAY_SIZE(mt9v111_formats); i++) { if (format->format.code == mt9v111_formats[i].code) { new_fmt.code = mt9v111_formats[i].code; break; } } if (i == ARRAY_SIZE(mt9v111_formats)) new_fmt.code = mt9v111_formats[0].code; for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) { unsigned int fit = abs(mt9v111_frame_sizes[i].width - format->format.width) + abs(mt9v111_frame_sizes[i].height - format->format.height); if (fit < best_fit) { best_fit = fit; idx = i; if (fit == 0) break; } } new_fmt.width = mt9v111_frame_sizes[idx].width; new_fmt.height = mt9v111_frame_sizes[idx].height; /* Update the device (or pad) format if it has changed. */ __fmt = __mt9v111_get_pad_format(mt9v111, sd_state, format->pad, format->which); /* Format hasn't changed, stop here. */ if (__fmt->code == new_fmt.code && __fmt->width == new_fmt.width && __fmt->height == new_fmt.height) goto done; /* Update the format and sizes, then mark changes as pending. */ __fmt->code = new_fmt.code; __fmt->width = new_fmt.width; __fmt->height = new_fmt.height; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) mt9v111->pending = true; dev_dbg(mt9v111->dev, "%s: mbus_code: %x - (%ux%u)\n", __func__, __fmt->code, __fmt->width, __fmt->height); done: format->format = *__fmt; mutex_unlock(&mt9v111->stream_mutex); return 0; } static int mt9v111_init_state(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state) { *v4l2_subdev_state_get_format(sd_state, 0) = mt9v111_def_fmt; return 0; } static const struct v4l2_subdev_core_ops mt9v111_core_ops = { .s_power = mt9v111_s_power, }; static const struct v4l2_subdev_video_ops mt9v111_video_ops = { .s_stream = mt9v111_s_stream, }; static const struct v4l2_subdev_pad_ops mt9v111_pad_ops = { .enum_mbus_code = mt9v111_enum_mbus_code, .enum_frame_size = mt9v111_enum_frame_size, .enum_frame_interval = mt9v111_enum_frame_interval, .get_fmt = mt9v111_get_format, .set_fmt = mt9v111_set_format, .get_frame_interval = mt9v111_get_frame_interval, .set_frame_interval = mt9v111_set_frame_interval, }; static const struct v4l2_subdev_ops mt9v111_ops = { .core = &mt9v111_core_ops, .video = &mt9v111_video_ops, .pad = &mt9v111_pad_ops, }; static const struct v4l2_subdev_internal_ops mt9v111_internal_ops = { .init_state = mt9v111_init_state, }; static const struct media_entity_operations mt9v111_subdev_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; /* --- V4L2 ctrl --- */ static int mt9v111_s_ctrl(struct v4l2_ctrl *ctrl) { struct mt9v111_dev *mt9v111 = container_of(ctrl->handler, struct mt9v111_dev, ctrls); int ret; mutex_lock(&mt9v111->pwr_mutex); /* * If sensor is powered down, just cache new control values, * no actual register access. */ if (!mt9v111->pwr_count) { mt9v111->pending = true; mutex_unlock(&mt9v111->pwr_mutex); return 0; } mutex_unlock(&mt9v111->pwr_mutex); /* * Flickering control gets disabled if both auto exp and auto awb * are disabled too. If any of the two is enabled, enable it. * * Disabling flickering when ae and awb are off allows a more precise * control of the programmed frame rate. */ if (mt9v111->auto_exp->is_new || mt9v111->auto_awb->is_new) { if (mt9v111->auto_exp->val == V4L2_EXPOSURE_MANUAL && mt9v111->auto_awb->val == V4L2_WHITE_BALANCE_MANUAL) ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, MT9V111_IFP_R08_OUTFMT_CTRL, MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER, 0); else ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, MT9V111_IFP_R08_OUTFMT_CTRL, MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER, 1); if (ret) return ret; } ret = -EINVAL; switch (ctrl->id) { case V4L2_CID_AUTO_WHITE_BALANCE: ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, MT9V111_IFP_R06_OPMODE_CTRL, MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN, ctrl->val == V4L2_WHITE_BALANCE_AUTO ? MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN : 0); break; case V4L2_CID_EXPOSURE_AUTO: ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, MT9V111_IFP_R06_OPMODE_CTRL, MT9V111_IFP_R06_OPMODE_CTRL_AE_EN, ctrl->val == V4L2_EXPOSURE_AUTO ? MT9V111_IFP_R06_OPMODE_CTRL_AE_EN : 0); break; case V4L2_CID_HBLANK: ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE, MT9V111_CORE_R05_HBLANK, MT9V111_CORE_R05_MAX_HBLANK, mt9v111->hblank->val); break; case V4L2_CID_VBLANK: ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE, MT9V111_CORE_R06_VBLANK, MT9V111_CORE_R06_MAX_VBLANK, mt9v111->vblank->val); break; } return ret; } static const struct v4l2_ctrl_ops mt9v111_ctrl_ops = { .s_ctrl = mt9v111_s_ctrl, }; static int mt9v111_chip_probe(struct mt9v111_dev *mt9v111) { int ret; u16 val; ret = __mt9v111_power_on(&mt9v111->sd); if (ret) return ret; ret = mt9v111_read(mt9v111->client, MT9V111_R01_CORE, MT9V111_CORE_RFF_CHIP_VER, &val); if (ret) goto power_off; if ((val >> 8) != MT9V111_CHIP_ID_HIGH && (val & 0xff) != MT9V111_CHIP_ID_LOW) { dev_err(mt9v111->dev, "Unable to identify MT9V111 chip: 0x%2x%2x\n", val >> 8, val & 0xff); ret = -EIO; goto power_off; } dev_dbg(mt9v111->dev, "Chip identified: 0x%2x%2x\n", val >> 8, val & 0xff); power_off: __mt9v111_power_off(&mt9v111->sd); return ret; } static int mt9v111_probe(struct i2c_client *client) { struct mt9v111_dev *mt9v111; struct v4l2_fract tpf; int ret; mt9v111 = devm_kzalloc(&client->dev, sizeof(*mt9v111), GFP_KERNEL); if (!mt9v111) return -ENOMEM; mt9v111->dev = &client->dev; mt9v111->client = client; mt9v111->clk = devm_clk_get(&client->dev, NULL); if (IS_ERR(mt9v111->clk)) return PTR_ERR(mt9v111->clk); mt9v111->sysclk = clk_get_rate(mt9v111->clk); if (mt9v111->sysclk > MT9V111_MAX_CLKIN) return -EINVAL; mt9v111->oe = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(mt9v111->oe)) { dev_err(&client->dev, "Unable to get GPIO \"enable\": %ld\n", PTR_ERR(mt9v111->oe)); return PTR_ERR(mt9v111->oe); } mt9v111->standby = devm_gpiod_get_optional(&client->dev, "standby", GPIOD_OUT_HIGH); if (IS_ERR(mt9v111->standby)) { dev_err(&client->dev, "Unable to get GPIO \"standby\": %ld\n", PTR_ERR(mt9v111->standby)); return PTR_ERR(mt9v111->standby); } mt9v111->reset = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(mt9v111->reset)) { dev_err(&client->dev, "Unable to get GPIO \"reset\": %ld\n", PTR_ERR(mt9v111->reset)); return PTR_ERR(mt9v111->reset); } mutex_init(&mt9v111->pwr_mutex); mutex_init(&mt9v111->stream_mutex); v4l2_ctrl_handler_init(&mt9v111->ctrls, 5); mt9v111->auto_awb = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, V4L2_WHITE_BALANCE_AUTO); mt9v111->auto_exp = v4l2_ctrl_new_std_menu(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); mt9v111->hblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_HBLANK, MT9V111_CORE_R05_MIN_HBLANK, MT9V111_CORE_R05_MAX_HBLANK, 1, MT9V111_CORE_R05_DEF_HBLANK); mt9v111->vblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_VBLANK, MT9V111_CORE_R06_MIN_VBLANK, MT9V111_CORE_R06_MAX_VBLANK, 1, MT9V111_CORE_R06_DEF_VBLANK); /* PIXEL_RATE is fixed: just expose it to user space. */ v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_PIXEL_RATE, 0, DIV_ROUND_CLOSEST(mt9v111->sysclk, 2), 1, DIV_ROUND_CLOSEST(mt9v111->sysclk, 2)); if (mt9v111->ctrls.error) { ret = mt9v111->ctrls.error; goto error_free_ctrls; } mt9v111->sd.ctrl_handler = &mt9v111->ctrls; /* Start with default configuration: 640x480 UYVY. */ mt9v111->fmt = mt9v111_def_fmt; /* Re-calculate blankings for 640x480@15fps. */ mt9v111->fps = 15; tpf.numerator = 1; tpf.denominator = mt9v111->fps; mt9v111_calc_frame_rate(mt9v111, &tpf); mt9v111->pwr_count = 0; mt9v111->addr_space = MT9V111_R01_IFP; mt9v111->pending = true; v4l2_i2c_subdev_init(&mt9v111->sd, client, &mt9v111_ops); mt9v111->sd.internal_ops = &mt9v111_internal_ops; mt9v111->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; mt9v111->sd.entity.ops = &mt9v111_subdev_entity_ops; mt9v111->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; mt9v111->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&mt9v111->sd.entity, 1, &mt9v111->pad); if (ret) goto error_free_entity; ret = mt9v111_chip_probe(mt9v111); if (ret) goto error_free_entity; ret = v4l2_async_register_subdev(&mt9v111->sd); if (ret) goto error_free_entity; return 0; error_free_entity: media_entity_cleanup(&mt9v111->sd.entity); error_free_ctrls: v4l2_ctrl_handler_free(&mt9v111->ctrls); mutex_destroy(&mt9v111->pwr_mutex); mutex_destroy(&mt9v111->stream_mutex); return ret; } static void mt9v111_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); v4l2_async_unregister_subdev(sd); media_entity_cleanup(&sd->entity); v4l2_ctrl_handler_free(&mt9v111->ctrls); mutex_destroy(&mt9v111->pwr_mutex); mutex_destroy(&mt9v111->stream_mutex); } static const struct of_device_id mt9v111_of_match[] = { { .compatible = "aptina,mt9v111", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mt9v111_of_match); static struct i2c_driver mt9v111_driver = { .driver = { .name = "mt9v111", .of_match_table = mt9v111_of_match, }, .probe = mt9v111_probe, .remove = mt9v111_remove, }; module_i2c_driver(mt9v111_driver); MODULE_DESCRIPTION("V4L2 sensor driver for Aptina MT9V111"); MODULE_AUTHOR("Jacopo Mondi "); MODULE_LICENSE("GPL v2");