/* * wm8994-core.c -- Device access for Wolfson WM8994 * * Copyright 2009 Wolfson Microelectronics PLC. * * Author: Mark Brown * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wm8994.h" static const struct mfd_cell wm8994_regulator_devs[] = { { .name = "wm8994-ldo", .id = 0, .pm_runtime_no_callbacks = true, }, { .name = "wm8994-ldo", .id = 1, .pm_runtime_no_callbacks = true, }, }; static struct resource wm8994_codec_resources[] = { { .start = WM8994_IRQ_TEMP_SHUT, .end = WM8994_IRQ_TEMP_WARN, .flags = IORESOURCE_IRQ, }, }; static struct resource wm8994_gpio_resources[] = { { .start = WM8994_IRQ_GPIO(1), .end = WM8994_IRQ_GPIO(11), .flags = IORESOURCE_IRQ, }, }; static const struct mfd_cell wm8994_devs[] = { { .name = "wm8994-codec", .num_resources = ARRAY_SIZE(wm8994_codec_resources), .resources = wm8994_codec_resources, }, { .name = "wm8994-gpio", .num_resources = ARRAY_SIZE(wm8994_gpio_resources), .resources = wm8994_gpio_resources, .pm_runtime_no_callbacks = true, }, }; /* * Supplies for the main bulk of CODEC; the LDO supplies are ignored * and should be handled via the standard regulator API supply * management. */ static const char *wm1811_main_supplies[] = { "DBVDD1", "DBVDD2", "DBVDD3", "DCVDD", "AVDD1", "AVDD2", "CPVDD", "SPKVDD1", "SPKVDD2", }; static const char *wm8994_main_supplies[] = { "DBVDD", "DCVDD", "AVDD1", "AVDD2", "CPVDD", "SPKVDD1", "SPKVDD2", }; static const char *wm8958_main_supplies[] = { "DBVDD1", "DBVDD2", "DBVDD3", "DCVDD", "AVDD1", "AVDD2", "CPVDD", "SPKVDD1", "SPKVDD2", }; #ifdef CONFIG_PM static int wm8994_suspend(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; /* Don't actually go through with the suspend if the CODEC is * still active for accessory detect. */ switch (wm8994->type) { case WM8958: case WM1811: ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); if (ret < 0) { dev_err(dev, "Failed to read power status: %d\n", ret); } else if (ret & WM8958_MICD_ENA) { dev_dbg(dev, "CODEC still active, ignoring suspend\n"); return 0; } break; default: break; } /* Disable LDO pulldowns while the device is suspended if we * don't know that something will be driving them. */ if (!wm8994->ldo_ena_always_driven) wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); /* Explicitly put the device into reset in case regulators * don't get disabled in order to ensure consistent restart. */ wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); regcache_mark_dirty(wm8994->regmap); /* Restore GPIO registers to prevent problems with mismatched * pin configurations. */ ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1, WM8994_GPIO_11); if (ret != 0) dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); /* In case one of the GPIOs is used as a wake input. */ ret = regcache_sync_region(wm8994->regmap, WM8994_INTERRUPT_STATUS_1_MASK, WM8994_INTERRUPT_STATUS_1_MASK); if (ret != 0) dev_err(dev, "Failed to restore interrupt mask: %d\n", ret); regcache_cache_only(wm8994->regmap, true); wm8994->suspended = true; ret = regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(dev, "Failed to disable supplies: %d\n", ret); return ret; } return 0; } static int wm8994_resume(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; /* We may have lied to the PM core about suspending */ if (!wm8994->suspended) return 0; ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(dev, "Failed to enable supplies: %d\n", ret); return ret; } regcache_cache_only(wm8994->regmap, false); ret = regcache_sync(wm8994->regmap); if (ret != 0) { dev_err(dev, "Failed to restore register map: %d\n", ret); goto err_enable; } /* Disable LDO pulldowns while the device is active */ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 0); wm8994->suspended = false; return 0; err_enable: regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); return ret; } #endif #ifdef CONFIG_REGULATOR static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) { struct wm8994_ldo_pdata *ldo_pdata; if (!pdata) return 0; ldo_pdata = &pdata->ldo[ldo]; if (!ldo_pdata->init_data) return 0; return ldo_pdata->init_data->num_consumer_supplies != 0; } #else static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) { return 0; } #endif static const struct reg_sequence wm8994_revc_patch[] = { { 0x102, 0x3 }, { 0x56, 0x3 }, { 0x817, 0x0 }, { 0x102, 0x0 }, }; static const struct reg_sequence wm8958_reva_patch[] = { { 0x102, 0x3 }, { 0xcb, 0x81 }, { 0x817, 0x0 }, { 0x102, 0x0 }, }; static const struct reg_sequence wm1811_reva_patch[] = { { 0x102, 0x3 }, { 0x56, 0xc07 }, { 0x5d, 0x7e }, { 0x5e, 0x0 }, { 0x102, 0x0 }, }; #ifdef CONFIG_OF static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) { struct device_node *np = wm8994->dev->of_node; struct wm8994_pdata *pdata = &wm8994->pdata; int i; if (!np) return 0; if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults, ARRAY_SIZE(pdata->gpio_defaults)) >= 0) { for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { if (wm8994->pdata.gpio_defaults[i] == 0) pdata->gpio_defaults[i] = WM8994_CONFIGURE_GPIO; } } of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias, ARRAY_SIZE(pdata->micbias)); pdata->lineout1_diff = true; pdata->lineout2_diff = true; if (of_find_property(np, "wlf,lineout1-se", NULL)) pdata->lineout1_diff = false; if (of_find_property(np, "wlf,lineout2-se", NULL)) pdata->lineout2_diff = false; if (of_find_property(np, "wlf,lineout1-feedback", NULL)) pdata->lineout1fb = true; if (of_find_property(np, "wlf,lineout2-feedback", NULL)) pdata->lineout2fb = true; if (of_find_property(np, "wlf,ldoena-always-driven", NULL)) pdata->lineout2fb = true; pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0); if (pdata->ldo[0].enable < 0) pdata->ldo[0].enable = 0; pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0); if (pdata->ldo[1].enable < 0) pdata->ldo[1].enable = 0; return 0; } #else static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) { return 0; } #endif /* * Instantiate the generic non-control parts of the device. */ static int wm8994_device_init(struct wm8994 *wm8994, int irq) { struct wm8994_pdata *pdata; struct regmap_config *regmap_config; const struct reg_sequence *regmap_patch = NULL; const char *devname; int ret, i, patch_regs = 0; int pulls = 0; if (dev_get_platdata(wm8994->dev)) { pdata = dev_get_platdata(wm8994->dev); wm8994->pdata = *pdata; } pdata = &wm8994->pdata; ret = wm8994_set_pdata_from_of(wm8994); if (ret != 0) return ret; dev_set_drvdata(wm8994->dev, wm8994); /* Add the on-chip regulators first for bootstrapping */ ret = mfd_add_devices(wm8994->dev, 0, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err; } switch (wm8994->type) { case WM1811: wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies); break; case WM8994: wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies); break; case WM8958: wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies); break; default: BUG(); goto err; } wm8994->supplies = devm_kzalloc(wm8994->dev, sizeof(struct regulator_bulk_data) * wm8994->num_supplies, GFP_KERNEL); if (!wm8994->supplies) { ret = -ENOMEM; goto err; } switch (wm8994->type) { case WM1811: for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++) wm8994->supplies[i].supply = wm1811_main_supplies[i]; break; case WM8994: for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) wm8994->supplies[i].supply = wm8994_main_supplies[i]; break; case WM8958: for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++) wm8994->supplies[i].supply = wm8958_main_supplies[i]; break; default: BUG(); goto err; } ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); goto err; } ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); goto err; } ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); if (ret < 0) { dev_err(wm8994->dev, "Failed to read ID register\n"); goto err_enable; } switch (ret) { case 0x1811: devname = "WM1811"; if (wm8994->type != WM1811) dev_warn(wm8994->dev, "Device registered as type %d\n", wm8994->type); wm8994->type = WM1811; break; case 0x8994: devname = "WM8994"; if (wm8994->type != WM8994) dev_warn(wm8994->dev, "Device registered as type %d\n", wm8994->type); wm8994->type = WM8994; break; case 0x8958: devname = "WM8958"; if (wm8994->type != WM8958) dev_warn(wm8994->dev, "Device registered as type %d\n", wm8994->type); wm8994->type = WM8958; break; default: dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", ret); ret = -EINVAL; goto err_enable; } ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION); if (ret < 0) { dev_err(wm8994->dev, "Failed to read revision register: %d\n", ret); goto err_enable; } wm8994->revision = ret & WM8994_CHIP_REV_MASK; wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT; switch (wm8994->type) { case WM8994: switch (wm8994->revision) { case 0: case 1: dev_warn(wm8994->dev, "revision %c not fully supported\n", 'A' + wm8994->revision); break; case 2: case 3: default: regmap_patch = wm8994_revc_patch; patch_regs = ARRAY_SIZE(wm8994_revc_patch); break; } break; case WM8958: switch (wm8994->revision) { case 0: regmap_patch = wm8958_reva_patch; patch_regs = ARRAY_SIZE(wm8958_reva_patch); break; default: break; } break; case WM1811: /* Revision C did not change the relevant layer */ if (wm8994->revision > 1) wm8994->revision++; regmap_patch = wm1811_reva_patch; patch_regs = ARRAY_SIZE(wm1811_reva_patch); break; default: break; } dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname, 'A' + wm8994->revision, wm8994->cust_id); switch (wm8994->type) { case WM1811: regmap_config = &wm1811_regmap_config; break; case WM8994: regmap_config = &wm8994_regmap_config; break; case WM8958: regmap_config = &wm8958_regmap_config; break; default: dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type); return -EINVAL; } ret = regmap_reinit_cache(wm8994->regmap, regmap_config); if (ret != 0) { dev_err(wm8994->dev, "Failed to reinit register cache: %d\n", ret); return ret; } /* Explicitly put the device into reset in case regulators * don't get disabled in order to ensure we know the device * state. */ ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); if (ret != 0) { dev_err(wm8994->dev, "Failed to reset device: %d\n", ret); return ret; } if (regmap_patch) { ret = regmap_register_patch(wm8994->regmap, regmap_patch, patch_regs); if (ret != 0) { dev_err(wm8994->dev, "Failed to register patch: %d\n", ret); goto err; } } wm8994->irq_base = pdata->irq_base; wm8994->gpio_base = pdata->gpio_base; /* GPIO configuration is only applied if it's non-zero */ for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { if (pdata->gpio_defaults[i]) { wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, 0xffff, pdata->gpio_defaults[i]); } } wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; if (pdata->spkmode_pu) pulls |= WM8994_SPKMODE_PU; /* Disable unneeded pulls */ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD | WM8994_SPKMODE_PU | WM8994_CSNADDR_PD, pulls); /* In some system designs where the regulators are not in use, * we can achieve a small reduction in leakage currents by * floating LDO outputs. This bit makes no difference if the * LDOs are enabled, it only affects cases where the LDOs were * in operation and are then disabled. */ for (i = 0; i < WM8994_NUM_LDO_REGS; i++) { if (wm8994_ldo_in_use(pdata, i)) wm8994_set_bits(wm8994, WM8994_LDO_1 + i, WM8994_LDO1_DISCH, WM8994_LDO1_DISCH); else wm8994_set_bits(wm8994, WM8994_LDO_1 + i, WM8994_LDO1_DISCH, 0); } wm8994_irq_init(wm8994); ret = mfd_add_devices(wm8994->dev, -1, wm8994_devs, ARRAY_SIZE(wm8994_devs), NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err_irq; } pm_runtime_enable(wm8994->dev); pm_runtime_idle(wm8994->dev); return 0; err_irq: wm8994_irq_exit(wm8994); err_enable: regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); err: mfd_remove_devices(wm8994->dev); return ret; } static void wm8994_device_exit(struct wm8994 *wm8994) { pm_runtime_disable(wm8994->dev); mfd_remove_devices(wm8994->dev); wm8994_irq_exit(wm8994); regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); } static const struct of_device_id wm8994_of_match[] = { { .compatible = "wlf,wm1811", .data = (void *)WM1811 }, { .compatible = "wlf,wm8994", .data = (void *)WM8994 }, { .compatible = "wlf,wm8958", .data = (void *)WM8958 }, { } }; MODULE_DEVICE_TABLE(of, wm8994_of_match); static int wm8994_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { const struct of_device_id *of_id; struct wm8994 *wm8994; int ret; wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL); if (wm8994 == NULL) return -ENOMEM; i2c_set_clientdata(i2c, wm8994); wm8994->dev = &i2c->dev; wm8994->irq = i2c->irq; if (i2c->dev.of_node) { of_id = of_match_device(wm8994_of_match, &i2c->dev); if (of_id) wm8994->type = (enum wm8994_type)of_id->data; } else { wm8994->type = id->driver_data; } wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config); if (IS_ERR(wm8994->regmap)) { ret = PTR_ERR(wm8994->regmap); dev_err(wm8994->dev, "Failed to allocate register map: %d\n", ret); return ret; } return wm8994_device_init(wm8994, i2c->irq); } static int wm8994_i2c_remove(struct i2c_client *i2c) { struct wm8994 *wm8994 = i2c_get_clientdata(i2c); wm8994_device_exit(wm8994); return 0; } static const struct i2c_device_id wm8994_i2c_id[] = { { "wm1811", WM1811 }, { "wm1811a", WM1811 }, { "wm8994", WM8994 }, { "wm8958", WM8958 }, { } }; MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); static const struct dev_pm_ops wm8994_pm_ops = { SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL) }; static struct i2c_driver wm8994_i2c_driver = { .driver = { .name = "wm8994", .owner = THIS_MODULE, .pm = &wm8994_pm_ops, .of_match_table = of_match_ptr(wm8994_of_match), }, .probe = wm8994_i2c_probe, .remove = wm8994_i2c_remove, .id_table = wm8994_i2c_id, }; module_i2c_driver(wm8994_i2c_driver); MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Brown ");