/* * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $ * * PMC551 PCI Mezzanine Ram Device * * Author: * Mark Ferrell * Copyright 1999,2000 Nortel Networks * * License: * As part of this driver was derived from the slram.c driver it * falls under the same license, which is GNU General Public * License v2 * * Description: * This driver is intended to support the PMC551 PCI Ram device * from Ramix Inc. The PMC551 is a PMC Mezzanine module for * cPCI embedded systems. The device contains a single SROM * that initially programs the V370PDC chipset onboard the * device, and various banks of DRAM/SDRAM onboard. This driver * implements this PCI Ram device as an MTD (Memory Technology * Device) so that it can be used to hold a file system, or for * added swap space in embedded systems. Since the memory on * this board isn't as fast as main memory we do not try to hook * it into main memory as that would simply reduce performance * on the system. Using it as a block device allows us to use * it as high speed swap or for a high speed disk device of some * sort. Which becomes very useful on diskless systems in the * embedded market I might add. * * Notes: * Due to what I assume is more buggy SROM, the 64M PMC551 I * have available claims that all 4 of it's DRAM banks have 64M * of ram configured (making a grand total of 256M onboard). * This is slightly annoying since the BAR0 size reflects the * aperture size, not the dram size, and the V370PDC supplies no * other method for memory size discovery. This problem is * mostly only relevant when compiled as a module, as the * unloading of the module with an aperture size smaller then * the ram will cause the driver to detect the onboard memory * size to be equal to the aperture size when the module is * reloaded. Soooo, to help, the module supports an msize * option to allow the specification of the onboard memory, and * an asize option, to allow the specification of the aperture * size. The aperture must be equal to or less then the memory * size, the driver will correct this if you screw it up. This * problem is not relevant for compiled in drivers as compiled * in drivers only init once. * * Credits: * Saeed Karamooz of Ramix INC. for the * initial example code of how to initialize this device and for * help with questions I had concerning operation of the device. * * Most of the MTD code for this driver was originally written * for the slram.o module in the MTD drivers package which * allows the mapping of system memory into an MTD device. * Since the PMC551 memory module is accessed in the same * fashion as system memory, the slram.c code became a very nice * fit to the needs of this driver. All we added was PCI * detection/initialization to the driver and automatically figure * out the size via the PCI detection.o, later changes by Corey * Minyard set up the card to utilize a 1M sliding apature. * * Corey Minyard * * Modified driver to utilize a sliding aperture instead of * mapping all memory into kernel space which turned out to * be very wasteful. * * Located a bug in the SROM's initialization sequence that * made the memory unusable, added a fix to code to touch up * the DRAM some. * * Bugs/FIXME's: * * MUST fix the init function to not spin on a register * waiting for it to set .. this does not safely handle busted * devices that never reset the register correctly which will * cause the system to hang w/ a reboot being the only chance at * recover. [sort of fixed, could be better] * * Add I2C handling of the SROM so we can read the SROM's information * about the aperture size. This should always accurately reflect the * onboard memory size. * * Comb the init routine. It's still a bit cludgy on a few things. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef CONFIG_PCI #error Enable PCI in your kernel config #endif #include #include #include static struct mtd_info *pmc551list; static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; u32 soff_hi, soff_lo; /* start address offset hi/lo */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; size_t retlen; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len); #endif end = instr->addr + instr->len - 1; /* Is it past the end? */ if ( end > mtd->size ) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size); #endif return -EINVAL; } eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); soff_lo = instr->addr & (priv->asize - 1); pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr); if ( soff_hi == eoff_hi || mtd->size == priv->asize) { /* The whole thing fits within one access, so just one shot will do it. */ memset(ptr, 0xff, instr->len); } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memset(ptr, 0xff, priv->asize); if (soff_hi + priv->asize >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point (mtd,(priv->base_map0|soff_hi), priv->asize, &retlen, &ptr); } memset (ptr, 0xff, eoff_lo); } out: instr->state = MTD_ERASE_DONE; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() done\n"); #endif mtd_erase_callback(instr); return 0; } static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf) { struct mypriv *priv = mtd->priv; u32 soff_hi; u32 soff_lo; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); #endif if (from + len > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size); #endif return -EINVAL; } soff_hi = from & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); /* Cheap hack optimization */ if( priv->curr_map0 != from ) { pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, (priv->base_map0 | soff_hi) ); priv->curr_map0 = soff_hi; } *mtdbuf = priv->start + soff_lo; *retlen = len; return 0; } static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif } static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mypriv *priv = mtd->priv; u32 soff_hi, soff_lo; /* start address offset hi/lo */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; u_char *copyto = buf; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize); #endif end = from + len - 1; /* Is it past the end? */ if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size); #endif return -EINVAL; } soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point (mtd, from, len, retlen, &ptr); if (soff_hi == eoff_hi) { /* The whole thing fits within one access, so just one shot will do it. */ memcpy(copyto, ptr, len); copyto += len; } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memcpy(copyto, ptr, priv->asize); copyto += priv->asize; if (soff_hi + priv->asize >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); } memcpy(copyto, ptr, eoff_lo); copyto += eoff_lo; } out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() done\n"); #endif *retlen = copyto - buf; return 0; } static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mypriv *priv = mtd->priv; u32 soff_hi, soff_lo; /* start address offset hi/lo */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; const u_char *copyfrom = buf; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize); #endif end = to + len - 1; /* Is it past the end? or did the u32 wrap? */ if (end > mtd->size ) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to); #endif return -EINVAL; } soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = to & (priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point (mtd, to, len, retlen, &ptr); if (soff_hi == eoff_hi) { /* The whole thing fits within one access, so just one shot will do it. */ memcpy(ptr, copyfrom, len); copyfrom += len; } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memcpy(ptr, copyfrom, priv->asize); copyfrom += priv->asize; if (soff_hi >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); } memcpy(ptr, copyfrom, eoff_lo); copyfrom += eoff_lo; } out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() done\n"); #endif *retlen = copyfrom - buf; return 0; } /* * Fixup routines for the V370PDC * PCI device ID 0x020011b0 * * This function basicly kick starts the DRAM oboard the card and gets it * ready to be used. Before this is done the device reads VERY erratic, so * much that it can crash the Linux 2.2.x series kernels when a user cat's * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL * register. FIXME: stop spinning on registers .. must implement a timeout * mechanism * returns the size of the memory region found. */ static u32 fixup_pmc551 (struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX u32 dram_data; #endif u32 size, dcmd, cfg, dtmp; u16 cmd, tmp, i; u8 bcmd, counter; /* Sanity Check */ if(!dev) { return -ENODEV; } /* * Attempt to reset the card * FIXME: Stop Spinning registers */ counter=0; /* unlock registers */ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 ); /* read in old data */ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); /* bang the reset line up and down for a few */ for(i=0;i<10;i++) { counter=0; bcmd &= ~0x80; while(counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } counter=0; bcmd |= 0x80; while(counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } } bcmd |= (0x40|0x20); pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); /* * Take care and turn off the memory on the device while we * tweak the configurations */ pci_read_config_word(dev, PCI_COMMAND, &cmd); tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY); pci_write_config_word(dev, PCI_COMMAND, tmp); /* * Disable existing aperture before probing memory size */ pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd); dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN); pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp); /* * Grab old BAR0 config so that we can figure out memory size * This is another bit of kludge going on. The reason for the * redundancy is I am hoping to retain the original configuration * previously assigned to the card by the BIOS or some previous * fixup routine in the kernel. So we read the old config into cfg, * then write all 1's to the memory space, read back the result into * "size", and then write back all the old config. */ pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg ); #ifndef CONFIG_MTD_PMC551_BUGFIX pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 ); pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size ); size = (size&PCI_BASE_ADDRESS_MEM_MASK); size &= ~(size-1); pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); #else /* * Get the size of the memory by reading all the DRAM size values * and adding them up. * * KLUDGE ALERT: the boards we are using have invalid column and * row mux values. We fix them here, but this will break other * memory configurations. */ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); size = PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); /* * Oops .. something went wrong */ if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { return -ENODEV; } #endif /* CONFIG_MTD_PMC551_BUGFIX */ if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { return -ENODEV; } /* * Precharge Dram */ pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 ); pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf ); /* * Wait until command has gone through * FIXME: register spinning issue */ do { pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd ); if(counter++ > 100)break; } while ( (PCI_COMMAND_IO) & cmd ); /* * Turn on auto refresh * The loop is taken directly from Ramix's example code. I assume that * this must be held high for some duration of time, but I can find no * documentation refrencing the reasons why. */ for ( i = 1; i<=8 ; i++) { pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df); /* * Make certain command has gone through * FIXME: register spinning issue */ counter=0; do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); if(counter++ > 100)break; } while ( (PCI_COMMAND_IO) & cmd ); } pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020); pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff); /* * Wait until command completes * FIXME: register spinning issue */ counter=0; do { pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd); if(counter++ > 100)break; } while ( (PCI_COMMAND_IO) & cmd ); pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd); dcmd |= 0x02000000; pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd); /* * Check to make certain fast back-to-back, if not * then set it so */ pci_read_config_word( dev, PCI_STATUS, &cmd); if((cmd&PCI_COMMAND_FAST_BACK) == 0) { cmd |= PCI_COMMAND_FAST_BACK; pci_write_config_word( dev, PCI_STATUS, cmd); } /* * Check to make certain the DEVSEL is set correctly, this device * has a tendancy to assert DEVSEL and TRDY when a write is performed * to the memory when memory is read-only */ if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) { cmd &= ~PCI_STATUS_DEVSEL_MASK; pci_write_config_word( dev, PCI_STATUS, cmd ); } /* * Set to be prefetchable and put everything back based on old cfg. * it's possible that the reset of the V370PDC nuked the original * setup */ /* cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); */ /* * Turn PCI memory and I/O bus access back on */ pci_write_config_word( dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO ); #ifdef CONFIG_MTD_PMC551_DEBUG /* * Some screen fun */ printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%lx\n", (size<1024)?size:(size<1048576)?size>>10:size>>20, (size<1024)?'B':(size<1048576)?'K':'M', size, ((dcmd&(0x1<<3)) == 0)?"non-":"", (dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK ); /* * Check to see the state of the memory */ pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd ); printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" "pmc551: DRAM_BLK0 Size: %d at %d\n" "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", (((0x1<<1)&dcmd) == 0)?"RW":"RO", (((0x1<<0)&dcmd) == 0)?"Off":"On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd ); printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" "pmc551: DRAM_BLK1 Size: %d at %d\n" "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", (((0x1<<1)&dcmd) == 0)?"RW":"RO", (((0x1<<0)&dcmd) == 0)?"Off":"On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd ); printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" "pmc551: DRAM_BLK2 Size: %d at %d\n" "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", (((0x1<<1)&dcmd) == 0)?"RW":"RO", (((0x1<<0)&dcmd) == 0)?"Off":"On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd ); printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" "pmc551: DRAM_BLK3 Size: %d at %d\n" "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", (((0x1<<1)&dcmd) == 0)?"RW":"RO", (((0x1<<0)&dcmd) == 0)?"Off":"On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); pci_read_config_word( dev, PCI_COMMAND, &cmd ); printk( KERN_DEBUG "pmc551: Memory Access %s\n", (((0x1<<1)&cmd) == 0)?"off":"on" ); printk( KERN_DEBUG "pmc551: I/O Access %s\n", (((0x1<<0)&cmd) == 0)?"off":"on" ); pci_read_config_word( dev, PCI_STATUS, &cmd ); printk( KERN_DEBUG "pmc551: Devsel %s\n", ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast": ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium": ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" ); printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n", ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" ); pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n" "pmc551: System Control Register is %slocked to PCI access\n" "pmc551: System Control Register is %slocked to EEPROM access\n", (bcmd&0x1)?"software":"hardware", (bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un"); #endif return size; } /* * Kernel version specific module stuffages */ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Ferrell "); MODULE_DESCRIPTION(PMC551_VERSION); /* * Stuff these outside the ifdef so as to not bust compiled in driver support */ static int msize=0; #if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE #else static int asize=0; #endif module_param(msize, int, 0); MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]"); module_param(asize, int, 0); MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); /* * PMC551 Card Initialization */ static int __init init_pmc551(void) { struct pci_dev *PCI_Device = NULL; struct mypriv *priv; int count, found=0; struct mtd_info *mtd; u32 length = 0; if(msize) { msize = (1 << (ffs(msize) - 1))<<20; if (msize > (1<<30)) { printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize); return -EINVAL; } } if(asize) { asize = (1 << (ffs(asize) - 1))<<20; if (asize > (1<<30) ) { printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize); return -EINVAL; } } printk(KERN_INFO PMC551_VERSION); /* * PCU-bus chipset probe. */ for( count = 0; count < MAX_MTD_DEVICES; count++ ) { if ((PCI_Device = pci_find_device(PCI_VENDOR_ID_V3_SEMI, PCI_DEVICE_ID_V3_SEMI_V370PDC, PCI_Device ) ) == NULL) { break; } printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%lX\n", PCI_Device->resource[0].start); /* * The PMC551 device acts VERY weird if you don't init it * first. i.e. it will not correctly report devsel. If for * some reason the sdram is in a wrote-protected state the * device will DEVSEL when it is written to causing problems * with the oldproc.c driver in * some kernels (2.2.*) */ if((length = fixup_pmc551(PCI_Device)) <= 0) { printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); break; } /* * This is needed until the driver is capable of reading the * onboard I2C SROM to discover the "real" memory size. */ if(msize) { length = msize; printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length); } else { msize = length; } mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); if (!mtd) { printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); break; } memset(mtd, 0, sizeof(struct mtd_info)); priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL); if (!priv) { printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); kfree(mtd); break; } memset(priv, 0, sizeof(*priv)); mtd->priv = priv; priv->dev = PCI_Device; if(asize > length) { printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20); priv->asize = asize = length; } else if (asize == 0 || asize == length) { printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20); priv->asize = asize = length; } else { printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20); priv->asize = asize; } priv->start = ioremap(((PCI_Device->resource[0].start) & PCI_BASE_ADDRESS_MEM_MASK), priv->asize); if (!priv->start) { printk(KERN_NOTICE "pmc551: Unable to map IO space\n"); kfree(mtd->priv); kfree(mtd); break; } #ifdef CONFIG_MTD_PMC551_DEBUG printk( KERN_DEBUG "pmc551: setting aperture to %d\n", ffs(priv->asize>>20)-1); #endif priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN | PMC551_PCI_MEM_MAP_ENABLE | (ffs(priv->asize>>20)-1)<<4 ); priv->curr_map0 = priv->base_map0; pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, priv->curr_map0 ); #ifdef CONFIG_MTD_PMC551_DEBUG printk( KERN_DEBUG "pmc551: aperture set to %d\n", (priv->base_map0 & 0xF0)>>4 ); #endif mtd->size = msize; mtd->flags = MTD_CAP_RAM; mtd->erase = pmc551_erase; mtd->read = pmc551_read; mtd->write = pmc551_write; mtd->point = pmc551_point; mtd->unpoint = pmc551_unpoint; mtd->type = MTD_GENERIC_TYPE; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; mtd->owner = THIS_MODULE; if (add_mtd_device(mtd)) { printk(KERN_NOTICE "pmc551: Failed to register new device\n"); iounmap(priv->start); kfree(mtd->priv); kfree(mtd); break; } printk(KERN_NOTICE "Registered pmc551 memory device.\n"); printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", priv->asize>>20, priv->start, priv->start + priv->asize); printk(KERN_NOTICE "Total memory is %d%c\n", (length<1024)?length: (length<1048576)?length>>10:length>>20, (length<1024)?'B':(length<1048576)?'K':'M'); priv->nextpmc551 = pmc551list; pmc551list = mtd; found++; } if( !pmc551list ) { printk(KERN_NOTICE "pmc551: not detected\n"); return -ENODEV; } else { printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found); return 0; } } /* * PMC551 Card Cleanup */ static void __exit cleanup_pmc551(void) { int found=0; struct mtd_info *mtd; struct mypriv *priv; while((mtd=pmc551list)) { priv = mtd->priv; pmc551list = priv->nextpmc551; if(priv->start) { printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n", priv->asize>>20, priv->start); iounmap (priv->start); } kfree (mtd->priv); del_mtd_device (mtd); kfree (mtd); found++; } printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found); } module_init(init_pmc551); module_exit(cleanup_pmc551);