/******************************************************************************* Copyright(c) 2006 Tundra Semiconductor Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *******************************************************************************/ /* This driver is based on the driver code originally developed * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by * scott.wood@timesys.com * Copyright (C) 2003 TimeSys Corporation * * Currently changes from original version are: * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com) * - modifications to handle two ports independently and support for * additional PHY devices (alexandre.bounine@tundra.com) * - Get hardware information from platform device. (tie-fei.zang@freescale.com) * */ #include <linux/module.h> #include <linux/types.h> #include <linux/init.h> #include <linux/net.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/delay.h> #include <linux/crc32.h> #include <linux/mii.h> #include <linux/device.h> #include <linux/pci.h> #include <linux/rtnetlink.h> #include <linux/timer.h> #include <linux/platform_device.h> #include <asm/system.h> #include <asm/io.h> #include <asm/tsi108.h> #include "tsi108_eth.h" #define MII_READ_DELAY 10000 /* max link wait time in msec */ #define TSI108_RXRING_LEN 256 /* NOTE: The driver currently does not support receiving packets * larger than the buffer size, so don't decrease this (unless you * want to add such support). */ #define TSI108_RXBUF_SIZE 1536 #define TSI108_TXRING_LEN 256 #define TSI108_TX_INT_FREQ 64 /* Check the phy status every half a second. */ #define CHECK_PHY_INTERVAL (HZ/2) static int tsi108_init_one(struct platform_device *pdev); static int tsi108_ether_remove(struct platform_device *pdev); struct tsi108_prv_data { void __iomem *regs; /* Base of normal regs */ void __iomem *phyregs; /* Base of register bank used for PHY access */ struct net_device *dev; struct napi_struct napi; unsigned int phy; /* Index of PHY for this interface */ unsigned int irq_num; unsigned int id; unsigned int phy_type; struct timer_list timer;/* Timer that triggers the check phy function */ unsigned int rxtail; /* Next entry in rxring to read */ unsigned int rxhead; /* Next entry in rxring to give a new buffer */ unsigned int rxfree; /* Number of free, allocated RX buffers */ unsigned int rxpending; /* Non-zero if there are still descriptors * to be processed from a previous descriptor * interrupt condition that has been cleared */ unsigned int txtail; /* Next TX descriptor to check status on */ unsigned int txhead; /* Next TX descriptor to use */ /* Number of free TX descriptors. This could be calculated from * rxhead and rxtail if one descriptor were left unused to disambiguate * full and empty conditions, but it's simpler to just keep track * explicitly. */ unsigned int txfree; unsigned int phy_ok; /* The PHY is currently powered on. */ /* PHY status (duplex is 1 for half, 2 for full, * so that the default 0 indicates that neither has * yet been configured). */ unsigned int link_up; unsigned int speed; unsigned int duplex; tx_desc *txring; rx_desc *rxring; struct sk_buff *txskbs[TSI108_TXRING_LEN]; struct sk_buff *rxskbs[TSI108_RXRING_LEN]; dma_addr_t txdma, rxdma; /* txlock nests in misclock and phy_lock */ spinlock_t txlock, misclock; /* stats is used to hold the upper bits of each hardware counter, * and tmpstats is used to hold the full values for returning * to the caller of get_stats(). They must be separate in case * an overflow interrupt occurs before the stats are consumed. */ struct net_device_stats stats; struct net_device_stats tmpstats; /* These stats are kept separate in hardware, thus require individual * fields for handling carry. They are combined in get_stats. */ unsigned long rx_fcs; /* Add to rx_frame_errors */ unsigned long rx_short_fcs; /* Add to rx_frame_errors */ unsigned long rx_long_fcs; /* Add to rx_frame_errors */ unsigned long rx_underruns; /* Add to rx_length_errors */ unsigned long rx_overruns; /* Add to rx_length_errors */ unsigned long tx_coll_abort; /* Add to tx_aborted_errors/collisions */ unsigned long tx_pause_drop; /* Add to tx_aborted_errors */ unsigned long mc_hash[16]; u32 msg_enable; /* debug message level */ struct mii_if_info mii_if; unsigned int init_media; }; /* Structure for a device driver */ static struct platform_driver tsi_eth_driver = { .probe = tsi108_init_one, .remove = tsi108_ether_remove, .driver = { .name = "tsi-ethernet", .owner = THIS_MODULE, }, }; static void tsi108_timed_checker(unsigned long dev_ptr); static void dump_eth_one(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); printk("Dumping %s...\n", dev->name); printk("intstat %x intmask %x phy_ok %d" " link %d speed %d duplex %d\n", TSI_READ(TSI108_EC_INTSTAT), TSI_READ(TSI108_EC_INTMASK), data->phy_ok, data->link_up, data->speed, data->duplex); printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n", data->txhead, data->txtail, data->txfree, TSI_READ(TSI108_EC_TXSTAT), TSI_READ(TSI108_EC_TXESTAT), TSI_READ(TSI108_EC_TXERR)); printk("RX: head %d, tail %d, free %d, stat %x," " estat %x, err %x, pending %d\n\n", data->rxhead, data->rxtail, data->rxfree, TSI_READ(TSI108_EC_RXSTAT), TSI_READ(TSI108_EC_RXESTAT), TSI_READ(TSI108_EC_RXERR), data->rxpending); } /* Synchronization is needed between the thread and up/down events. * Note that the PHY is accessed through the same registers for both * interfaces, so this can't be made interface-specific. */ static DEFINE_SPINLOCK(phy_lock); static int tsi108_read_mii(struct tsi108_prv_data *data, int reg) { unsigned i; TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, (data->phy << TSI108_MAC_MII_ADDR_PHY) | (reg << TSI108_MAC_MII_ADDR_REG)); TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0); TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ); for (i = 0; i < 100; i++) { if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) & (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY))) break; udelay(10); } if (i == 100) return 0xffff; else return (TSI_READ_PHY(TSI108_MAC_MII_DATAIN)); } static void tsi108_write_mii(struct tsi108_prv_data *data, int reg, u16 val) { unsigned i = 100; TSI_WRITE_PHY(TSI108_MAC_MII_ADDR, (data->phy << TSI108_MAC_MII_ADDR_PHY) | (reg << TSI108_MAC_MII_ADDR_REG)); TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val); while (i--) { if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY)) break; udelay(10); } } static int tsi108_mdio_read(struct net_device *dev, int addr, int reg) { struct tsi108_prv_data *data = netdev_priv(dev); return tsi108_read_mii(data, reg); } static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val) { struct tsi108_prv_data *data = netdev_priv(dev); tsi108_write_mii(data, reg, val); } static inline void tsi108_write_tbi(struct tsi108_prv_data *data, int reg, u16 val) { unsigned i = 1000; TSI_WRITE(TSI108_MAC_MII_ADDR, (0x1e << TSI108_MAC_MII_ADDR_PHY) | (reg << TSI108_MAC_MII_ADDR_REG)); TSI_WRITE(TSI108_MAC_MII_DATAOUT, val); while(i--) { if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY)) return; udelay(10); } printk(KERN_ERR "%s function time out \n", __func__); } static int mii_speed(struct mii_if_info *mii) { int advert, lpa, val, media; int lpa2 = 0; int speed; if (!mii_link_ok(mii)) return 0; val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR); if ((val & BMSR_ANEGCOMPLETE) == 0) return 0; advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE); lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA); media = mii_nway_result(advert & lpa); if (mii->supports_gmii) lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000); speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 : (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10); return speed; } static void tsi108_check_phy(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 mac_cfg2_reg, portctrl_reg; u32 duplex; u32 speed; unsigned long flags; spin_lock_irqsave(&phy_lock, flags); if (!data->phy_ok) goto out; duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media); data->init_media = 0; if (netif_carrier_ok(dev)) { speed = mii_speed(&data->mii_if); if ((speed != data->speed) || duplex) { mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2); portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL); mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK; if (speed == 1000) { mac_cfg2_reg |= TSI108_MAC_CFG2_GIG; portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG; } else { mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG; portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG; } data->speed = speed; if (data->mii_if.full_duplex) { mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX; portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX; data->duplex = 2; } else { mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX; portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX; data->duplex = 1; } TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg); TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg); } if (data->link_up == 0) { /* The manual says it can take 3-4 usecs for the speed change * to take effect. */ udelay(5); spin_lock(&data->txlock); if (is_valid_ether_addr(dev->dev_addr) && data->txfree) netif_wake_queue(dev); data->link_up = 1; spin_unlock(&data->txlock); } } else { if (data->link_up == 1) { netif_stop_queue(dev); data->link_up = 0; printk(KERN_NOTICE "%s : link is down\n", dev->name); } goto out; } out: spin_unlock_irqrestore(&phy_lock, flags); } static inline void tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift, unsigned long *upper) { if (carry & carry_bit) *upper += carry_shift; } static void tsi108_stat_carry(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 carry1, carry2; spin_lock_irq(&data->misclock); carry1 = TSI_READ(TSI108_STAT_CARRY1); carry2 = TSI_READ(TSI108_STAT_CARRY2); TSI_WRITE(TSI108_STAT_CARRY1, carry1); TSI_WRITE(TSI108_STAT_CARRY2, carry2); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES, TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS, TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY, &data->rx_fcs); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST, TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN, TSI108_STAT_RXALIGN_CARRY, &data->stats.rx_frame_errors); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH, TSI108_STAT_RXLENGTH_CARRY, &data->stats.rx_length_errors); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT, TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO, TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG, TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER, TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs); tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP, TSI108_STAT_RXDROP_CARRY, &data->stats.rx_missed_errors); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES, TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS, TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF, TSI108_STAT_TXEXDEF_CARRY, &data->stats.tx_aborted_errors); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL, TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL, TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions); tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE, TSI108_STAT_TXPAUSEDROP_CARRY, &data->tx_pause_drop); spin_unlock_irq(&data->misclock); } /* Read a stat counter atomically with respect to carries. * data->misclock must be held. */ static inline unsigned long tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit, int carry_shift, unsigned long *upper) { int carryreg; unsigned long val; if (reg < 0xb0) carryreg = TSI108_STAT_CARRY1; else carryreg = TSI108_STAT_CARRY2; again: val = TSI_READ(reg) | *upper; /* Check to see if it overflowed, but the interrupt hasn't * been serviced yet. If so, handle the carry here, and * try again. */ if (unlikely(TSI_READ(carryreg) & carry_bit)) { *upper += carry_shift; TSI_WRITE(carryreg, carry_bit); goto again; } return val; } static struct net_device_stats *tsi108_get_stats(struct net_device *dev) { unsigned long excol; struct tsi108_prv_data *data = netdev_priv(dev); spin_lock_irq(&data->misclock); data->tmpstats.rx_packets = tsi108_read_stat(data, TSI108_STAT_RXPKTS, TSI108_STAT_CARRY1_RXPKTS, TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets); data->tmpstats.tx_packets = tsi108_read_stat(data, TSI108_STAT_TXPKTS, TSI108_STAT_CARRY2_TXPKTS, TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets); data->tmpstats.rx_bytes = tsi108_read_stat(data, TSI108_STAT_RXBYTES, TSI108_STAT_CARRY1_RXBYTES, TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes); data->tmpstats.tx_bytes = tsi108_read_stat(data, TSI108_STAT_TXBYTES, TSI108_STAT_CARRY2_TXBYTES, TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes); data->tmpstats.multicast = tsi108_read_stat(data, TSI108_STAT_RXMCAST, TSI108_STAT_CARRY1_RXMCAST, TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast); excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL, TSI108_STAT_CARRY2_TXEXCOL, TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort); data->tmpstats.collisions = tsi108_read_stat(data, TSI108_STAT_TXTCOL, TSI108_STAT_CARRY2_TXTCOL, TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions); data->tmpstats.collisions += excol; data->tmpstats.rx_length_errors = tsi108_read_stat(data, TSI108_STAT_RXLENGTH, TSI108_STAT_CARRY1_RXLENGTH, TSI108_STAT_RXLENGTH_CARRY, &data->stats.rx_length_errors); data->tmpstats.rx_length_errors += tsi108_read_stat(data, TSI108_STAT_RXRUNT, TSI108_STAT_CARRY1_RXRUNT, TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns); data->tmpstats.rx_length_errors += tsi108_read_stat(data, TSI108_STAT_RXJUMBO, TSI108_STAT_CARRY1_RXJUMBO, TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns); data->tmpstats.rx_frame_errors = tsi108_read_stat(data, TSI108_STAT_RXALIGN, TSI108_STAT_CARRY1_RXALIGN, TSI108_STAT_RXALIGN_CARRY, &data->stats.rx_frame_errors); data->tmpstats.rx_frame_errors += tsi108_read_stat(data, TSI108_STAT_RXFCS, TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY, &data->rx_fcs); data->tmpstats.rx_frame_errors += tsi108_read_stat(data, TSI108_STAT_RXFRAG, TSI108_STAT_CARRY1_RXFRAG, TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs); data->tmpstats.rx_missed_errors = tsi108_read_stat(data, TSI108_STAT_RXDROP, TSI108_STAT_CARRY1_RXDROP, TSI108_STAT_RXDROP_CARRY, &data->stats.rx_missed_errors); /* These three are maintained by software. */ data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors; data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors; data->tmpstats.tx_aborted_errors = tsi108_read_stat(data, TSI108_STAT_TXEXDEF, TSI108_STAT_CARRY2_TXEXDEF, TSI108_STAT_TXEXDEF_CARRY, &data->stats.tx_aborted_errors); data->tmpstats.tx_aborted_errors += tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP, TSI108_STAT_CARRY2_TXPAUSE, TSI108_STAT_TXPAUSEDROP_CARRY, &data->tx_pause_drop); data->tmpstats.tx_aborted_errors += excol; data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors; data->tmpstats.rx_errors = data->tmpstats.rx_length_errors + data->tmpstats.rx_crc_errors + data->tmpstats.rx_frame_errors + data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors; spin_unlock_irq(&data->misclock); return &data->tmpstats; } static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev) { TSI_WRITE(TSI108_EC_RXQ_PTRHIGH, TSI108_EC_RXQ_PTRHIGH_VALID); TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO | TSI108_EC_RXCTRL_QUEUE0); } static void tsi108_restart_tx(struct tsi108_prv_data * data) { TSI_WRITE(TSI108_EC_TXQ_PTRHIGH, TSI108_EC_TXQ_PTRHIGH_VALID); TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT | TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0); } /* txlock must be held by caller, with IRQs disabled, and * with permission to re-enable them when the lock is dropped. */ static void tsi108_complete_tx(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); int tx; struct sk_buff *skb; int release = 0; while (!data->txfree || data->txhead != data->txtail) { tx = data->txtail; if (data->txring[tx].misc & TSI108_TX_OWN) break; skb = data->txskbs[tx]; if (!(data->txring[tx].misc & TSI108_TX_OK)) printk("%s: bad tx packet, misc %x\n", dev->name, data->txring[tx].misc); data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; data->txfree++; if (data->txring[tx].misc & TSI108_TX_EOF) { dev_kfree_skb_any(skb); release++; } } if (release) { if (is_valid_ether_addr(dev->dev_addr) && data->link_up) netif_wake_queue(dev); } } static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); int frags = skb_shinfo(skb)->nr_frags + 1; int i; if (!data->phy_ok && net_ratelimit()) printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name); if (!data->link_up) { printk(KERN_ERR "%s: Transmit while link is down!\n", dev->name); netif_stop_queue(dev); return NETDEV_TX_BUSY; } if (data->txfree < MAX_SKB_FRAGS + 1) { netif_stop_queue(dev); if (net_ratelimit()) printk(KERN_ERR "%s: Transmit with full tx ring!\n", dev->name); return NETDEV_TX_BUSY; } if (data->txfree - frags < MAX_SKB_FRAGS + 1) { netif_stop_queue(dev); } spin_lock_irq(&data->txlock); for (i = 0; i < frags; i++) { int misc = 0; int tx = data->txhead; /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with * the interrupt bit. TX descriptor-complete interrupts are * enabled when the queue fills up, and masked when there is * still free space. This way, when saturating the outbound * link, the tx interrupts are kept to a reasonable level. * When the queue is not full, reclamation of skbs still occurs * as new packets are transmitted, or on a queue-empty * interrupt. */ if ((tx % TSI108_TX_INT_FREQ == 0) && ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ)) misc = TSI108_TX_INT; data->txskbs[tx] = skb; if (i == 0) { data->txring[tx].buf0 = dma_map_single(NULL, skb->data, skb->len - skb->data_len, DMA_TO_DEVICE); data->txring[tx].len = skb->len - skb->data_len; misc |= TSI108_TX_SOF; } else { skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; data->txring[tx].buf0 = dma_map_page(NULL, frag->page, frag->page_offset, frag->size, DMA_TO_DEVICE); data->txring[tx].len = frag->size; } if (i == frags - 1) misc |= TSI108_TX_EOF; if (netif_msg_pktdata(data)) { int i; printk("%s: Tx Frame contents (%d)\n", dev->name, skb->len); for (i = 0; i < skb->len; i++) printk(" %2.2x", skb->data[i]); printk(".\n"); } data->txring[tx].misc = misc | TSI108_TX_OWN; data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN; data->txfree--; } tsi108_complete_tx(dev); /* This must be done after the check for completed tx descriptors, * so that the tail pointer is correct. */ if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0)) tsi108_restart_tx(data); spin_unlock_irq(&data->txlock); return NETDEV_TX_OK; } static int tsi108_complete_rx(struct net_device *dev, int budget) { struct tsi108_prv_data *data = netdev_priv(dev); int done = 0; while (data->rxfree && done != budget) { int rx = data->rxtail; struct sk_buff *skb; if (data->rxring[rx].misc & TSI108_RX_OWN) break; skb = data->rxskbs[rx]; data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; data->rxfree--; done++; if (data->rxring[rx].misc & TSI108_RX_BAD) { spin_lock_irq(&data->misclock); if (data->rxring[rx].misc & TSI108_RX_CRC) data->stats.rx_crc_errors++; if (data->rxring[rx].misc & TSI108_RX_OVER) data->stats.rx_fifo_errors++; spin_unlock_irq(&data->misclock); dev_kfree_skb_any(skb); continue; } if (netif_msg_pktdata(data)) { int i; printk("%s: Rx Frame contents (%d)\n", dev->name, data->rxring[rx].len); for (i = 0; i < data->rxring[rx].len; i++) printk(" %2.2x", skb->data[i]); printk(".\n"); } skb_put(skb, data->rxring[rx].len); skb->protocol = eth_type_trans(skb, dev); netif_receive_skb(skb); } return done; } static int tsi108_refill_rx(struct net_device *dev, int budget) { struct tsi108_prv_data *data = netdev_priv(dev); int done = 0; while (data->rxfree != TSI108_RXRING_LEN && done != budget) { int rx = data->rxhead; struct sk_buff *skb; data->rxskbs[rx] = skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + 2); if (!skb) break; skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */ data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, TSI108_RX_SKB_SIZE, DMA_FROM_DEVICE); /* Sometimes the hardware sets blen to zero after packet * reception, even though the manual says that it's only ever * modified by the driver. */ data->rxring[rx].blen = TSI108_RX_SKB_SIZE; data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT; data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN; data->rxfree++; done++; } if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_QUEUE0)) tsi108_restart_rx(data, dev); return done; } static int tsi108_poll(struct napi_struct *napi, int budget) { struct tsi108_prv_data *data = container_of(napi, struct tsi108_prv_data, napi); struct net_device *dev = data->dev; u32 estat = TSI_READ(TSI108_EC_RXESTAT); u32 intstat = TSI_READ(TSI108_EC_INTSTAT); int num_received = 0, num_filled = 0; intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT; TSI_WRITE(TSI108_EC_RXESTAT, estat); TSI_WRITE(TSI108_EC_INTSTAT, intstat); if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT)) num_received = tsi108_complete_rx(dev, budget); /* This should normally fill no more slots than the number of * packets received in tsi108_complete_rx(). The exception * is when we previously ran out of memory for RX SKBs. In that * case, it's helpful to obey the budget, not only so that the * CPU isn't hogged, but so that memory (which may still be low) * is not hogged by one device. * * A work unit is considered to be two SKBs to allow us to catch * up when the ring has shrunk due to out-of-memory but we're * still removing the full budget's worth of packets each time. */ if (data->rxfree < TSI108_RXRING_LEN) num_filled = tsi108_refill_rx(dev, budget * 2); if (intstat & TSI108_INT_RXERROR) { u32 err = TSI_READ(TSI108_EC_RXERR); TSI_WRITE(TSI108_EC_RXERR, err); if (err) { if (net_ratelimit()) printk(KERN_DEBUG "%s: RX error %x\n", dev->name, err); if (!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_QUEUE0)) tsi108_restart_rx(data, dev); } } if (intstat & TSI108_INT_RXOVERRUN) { spin_lock_irq(&data->misclock); data->stats.rx_fifo_errors++; spin_unlock_irq(&data->misclock); } if (num_received < budget) { data->rxpending = 0; napi_complete(napi); TSI_WRITE(TSI108_EC_INTMASK, TSI_READ(TSI108_EC_INTMASK) & ~(TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT)); } else { data->rxpending = 1; } return num_received; } static void tsi108_rx_int(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); /* A race could cause dev to already be scheduled, so it's not an * error if that happens (and interrupts shouldn't be re-masked, * because that can cause harmful races, if poll has already * unmasked them but not cleared LINK_STATE_SCHED). * * This can happen if this code races with tsi108_poll(), which masks * the interrupts after tsi108_irq_one() read the mask, but before * napi_schedule is called. It could also happen due to calls * from tsi108_check_rxring(). */ if (napi_schedule_prep(&data->napi)) { /* Mask, rather than ack, the receive interrupts. The ack * will happen in tsi108_poll(). */ TSI_WRITE(TSI108_EC_INTMASK, TSI_READ(TSI108_EC_INTMASK) | TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT); __napi_schedule(&data->napi); } else { if (!netif_running(dev)) { /* This can happen if an interrupt occurs while the * interface is being brought down, as the START * bit is cleared before the stop function is called. * * In this case, the interrupts must be masked, or * they will continue indefinitely. * * There's a race here if the interface is brought down * and then up in rapid succession, as the device could * be made running after the above check and before * the masking below. This will only happen if the IRQ * thread has a lower priority than the task brining * up the interface. Fixing this race would likely * require changes in generic code. */ TSI_WRITE(TSI108_EC_INTMASK, TSI_READ (TSI108_EC_INTMASK) | TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT); } } } /* If the RX ring has run out of memory, try periodically * to allocate some more, as otherwise poll would never * get called (apart from the initial end-of-queue condition). * * This is called once per second (by default) from the thread. */ static void tsi108_check_rxring(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); /* A poll is scheduled, as opposed to caling tsi108_refill_rx * directly, so as to keep the receive path single-threaded * (and thus not needing a lock). */ if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4) tsi108_rx_int(dev); } static void tsi108_tx_int(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 estat = TSI_READ(TSI108_EC_TXESTAT); TSI_WRITE(TSI108_EC_TXESTAT, estat); TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE | TSI108_INT_TXERROR); if (estat & TSI108_EC_TXESTAT_Q0_ERR) { u32 err = TSI_READ(TSI108_EC_TXERR); TSI_WRITE(TSI108_EC_TXERR, err); if (err && net_ratelimit()) printk(KERN_ERR "%s: TX error %x\n", dev->name, err); } if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) { spin_lock(&data->txlock); tsi108_complete_tx(dev); spin_unlock(&data->txlock); } } static irqreturn_t tsi108_irq(int irq, void *dev_id) { struct net_device *dev = dev_id; struct tsi108_prv_data *data = netdev_priv(dev); u32 stat = TSI_READ(TSI108_EC_INTSTAT); if (!(stat & TSI108_INT_ANY)) return IRQ_NONE; /* Not our interrupt */ stat &= ~TSI_READ(TSI108_EC_INTMASK); if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE | TSI108_INT_TXERROR)) tsi108_tx_int(dev); if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH | TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR)) tsi108_rx_int(dev); if (stat & TSI108_INT_SFN) { if (net_ratelimit()) printk(KERN_DEBUG "%s: SFN error\n", dev->name); TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN); } if (stat & TSI108_INT_STATCARRY) { tsi108_stat_carry(dev); TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY); } return IRQ_HANDLED; } static void tsi108_stop_ethernet(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); int i = 1000; /* Disable all TX and RX queues ... */ TSI_WRITE(TSI108_EC_TXCTRL, 0); TSI_WRITE(TSI108_EC_RXCTRL, 0); /* ...and wait for them to become idle */ while(i--) { if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE)) break; udelay(10); } i = 1000; while(i--){ if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE)) return; udelay(10); } printk(KERN_ERR "%s function time out \n", __func__); } static void tsi108_reset_ether(struct tsi108_prv_data * data) { TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST); udelay(100); TSI_WRITE(TSI108_MAC_CFG1, 0); TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST); udelay(100); TSI_WRITE(TSI108_EC_PORTCTRL, TSI_READ(TSI108_EC_PORTCTRL) & ~TSI108_EC_PORTCTRL_STATRST); TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST); udelay(100); TSI_WRITE(TSI108_EC_TXCFG, TSI_READ(TSI108_EC_TXCFG) & ~TSI108_EC_TXCFG_RST); TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST); udelay(100); TSI_WRITE(TSI108_EC_RXCFG, TSI_READ(TSI108_EC_RXCFG) & ~TSI108_EC_RXCFG_RST); TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, TSI_READ(TSI108_MAC_MII_MGMT_CFG) | TSI108_MAC_MII_MGMT_RST); udelay(100); TSI_WRITE(TSI108_MAC_MII_MGMT_CFG, (TSI_READ(TSI108_MAC_MII_MGMT_CFG) & ~(TSI108_MAC_MII_MGMT_RST | TSI108_MAC_MII_MGMT_CLK)) | 0x07); } static int tsi108_get_mac(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 word1 = TSI_READ(TSI108_MAC_ADDR1); u32 word2 = TSI_READ(TSI108_MAC_ADDR2); /* Note that the octets are reversed from what the manual says, * producing an even weirder ordering... */ if (word2 == 0 && word1 == 0) { dev->dev_addr[0] = 0x00; dev->dev_addr[1] = 0x06; dev->dev_addr[2] = 0xd2; dev->dev_addr[3] = 0x00; dev->dev_addr[4] = 0x00; if (0x8 == data->phy) dev->dev_addr[5] = 0x01; else dev->dev_addr[5] = 0x02; word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); TSI_WRITE(TSI108_MAC_ADDR1, word1); TSI_WRITE(TSI108_MAC_ADDR2, word2); } else { dev->dev_addr[0] = (word2 >> 16) & 0xff; dev->dev_addr[1] = (word2 >> 24) & 0xff; dev->dev_addr[2] = (word1 >> 0) & 0xff; dev->dev_addr[3] = (word1 >> 8) & 0xff; dev->dev_addr[4] = (word1 >> 16) & 0xff; dev->dev_addr[5] = (word1 >> 24) & 0xff; } if (!is_valid_ether_addr(dev->dev_addr)) { printk(KERN_ERR "%s: Invalid MAC address. word1: %08x, word2: %08x\n", dev->name, word1, word2); return -EINVAL; } return 0; } static int tsi108_set_mac(struct net_device *dev, void *addr) { struct tsi108_prv_data *data = netdev_priv(dev); u32 word1, word2; int i; if (!is_valid_ether_addr(addr)) return -EINVAL; for (i = 0; i < 6; i++) /* +2 is for the offset of the HW addr type */ dev->dev_addr[i] = ((unsigned char *)addr)[i + 2]; word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24); word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) | (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24); spin_lock_irq(&data->misclock); TSI_WRITE(TSI108_MAC_ADDR1, word1); TSI_WRITE(TSI108_MAC_ADDR2, word2); spin_lock(&data->txlock); if (data->txfree && data->link_up) netif_wake_queue(dev); spin_unlock(&data->txlock); spin_unlock_irq(&data->misclock); return 0; } /* Protected by dev->xmit_lock. */ static void tsi108_set_rx_mode(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 rxcfg = TSI_READ(TSI108_EC_RXCFG); if (dev->flags & IFF_PROMISC) { rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH); rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE; goto out; } rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE); if (dev->flags & IFF_ALLMULTI || dev->mc_count) { int i; struct dev_mc_list *mc = dev->mc_list; rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH; memset(data->mc_hash, 0, sizeof(data->mc_hash)); while (mc) { u32 hash, crc; if (mc->dmi_addrlen == 6) { crc = ether_crc(6, mc->dmi_addr); hash = crc >> 23; __set_bit(hash, &data->mc_hash[0]); } else { printk(KERN_ERR "%s: got multicast address of length %d instead of 6.\n", dev->name, mc->dmi_addrlen); } mc = mc->next; } TSI_WRITE(TSI108_EC_HASHADDR, TSI108_EC_HASHADDR_AUTOINC | TSI108_EC_HASHADDR_MCAST); for (i = 0; i < 16; i++) { /* The manual says that the hardware may drop * back-to-back writes to the data register. */ udelay(1); TSI_WRITE(TSI108_EC_HASHDATA, data->mc_hash[i]); } } out: TSI_WRITE(TSI108_EC_RXCFG, rxcfg); } static void tsi108_init_phy(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); u32 i = 0; u16 phyval = 0; unsigned long flags; spin_lock_irqsave(&phy_lock, flags); tsi108_write_mii(data, MII_BMCR, BMCR_RESET); while (--i) { if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET)) break; udelay(10); } if (i == 0) printk(KERN_ERR "%s function time out \n", __func__); if (data->phy_type == TSI108_PHY_BCM54XX) { tsi108_write_mii(data, 0x09, 0x0300); tsi108_write_mii(data, 0x10, 0x1020); tsi108_write_mii(data, 0x1c, 0x8c00); } tsi108_write_mii(data, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART); while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART) cpu_relax(); /* Set G/MII mode and receive clock select in TBI control #2. The * second port won't work if this isn't done, even though we don't * use TBI mode. */ tsi108_write_tbi(data, 0x11, 0x30); /* FIXME: It seems to take more than 2 back-to-back reads to the * PHY_STAT register before the link up status bit is set. */ data->link_up = 0; while (!((phyval = tsi108_read_mii(data, MII_BMSR)) & BMSR_LSTATUS)) { if (i++ > (MII_READ_DELAY / 10)) { break; } spin_unlock_irqrestore(&phy_lock, flags); msleep(10); spin_lock_irqsave(&phy_lock, flags); } data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval); data->phy_ok = 1; data->init_media = 1; spin_unlock_irqrestore(&phy_lock, flags); } static void tsi108_kill_phy(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); unsigned long flags; spin_lock_irqsave(&phy_lock, flags); tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN); data->phy_ok = 0; spin_unlock_irqrestore(&phy_lock, flags); } static int tsi108_open(struct net_device *dev) { int i; struct tsi108_prv_data *data = netdev_priv(dev); unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc); unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc); i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev); if (i != 0) { printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n", data->id, data->irq_num); return i; } else { dev->irq = data->irq_num; printk(KERN_NOTICE "tsi108_open : Port %d Assigned IRQ %d to %s\n", data->id, dev->irq, dev->name); } data->rxring = dma_alloc_coherent(NULL, rxring_size, &data->rxdma, GFP_KERNEL); if (!data->rxring) { printk(KERN_DEBUG "TSI108_ETH: failed to allocate memory for rxring!\n"); return -ENOMEM; } else { memset(data->rxring, 0, rxring_size); } data->txring = dma_alloc_coherent(NULL, txring_size, &data->txdma, GFP_KERNEL); if (!data->txring) { printk(KERN_DEBUG "TSI108_ETH: failed to allocate memory for txring!\n"); pci_free_consistent(0, rxring_size, data->rxring, data->rxdma); return -ENOMEM; } else { memset(data->txring, 0, txring_size); } for (i = 0; i < TSI108_RXRING_LEN; i++) { data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc); data->rxring[i].blen = TSI108_RXBUF_SIZE; data->rxring[i].vlan = 0; } data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma; data->rxtail = 0; data->rxhead = 0; for (i = 0; i < TSI108_RXRING_LEN; i++) { struct sk_buff *skb; skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN); if (!skb) { /* Bah. No memory for now, but maybe we'll get * some more later. * For now, we'll live with the smaller ring. */ printk(KERN_WARNING "%s: Could only allocate %d receive skb(s).\n", dev->name, i); data->rxhead = i; break; } data->rxskbs[i] = skb; /* Align the payload on a 4-byte boundary */ skb_reserve(skb, 2); data->rxskbs[i] = skb; data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data); data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT; } data->rxfree = i; TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma); for (i = 0; i < TSI108_TXRING_LEN; i++) { data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc); data->txring[i].misc = 0; } data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma; data->txtail = 0; data->txhead = 0; data->txfree = TSI108_TXRING_LEN; TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma); tsi108_init_phy(dev); napi_enable(&data->napi); setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev); mod_timer(&data->timer, jiffies + 1); tsi108_restart_rx(data, dev); TSI_WRITE(TSI108_EC_INTSTAT, ~0); TSI_WRITE(TSI108_EC_INTMASK, ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR | TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 | TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT | TSI108_INT_SFN | TSI108_INT_STATCARRY)); TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN); netif_start_queue(dev); return 0; } static int tsi108_close(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); netif_stop_queue(dev); napi_disable(&data->napi); del_timer_sync(&data->timer); tsi108_stop_ethernet(dev); tsi108_kill_phy(dev); TSI_WRITE(TSI108_EC_INTMASK, ~0); TSI_WRITE(TSI108_MAC_CFG1, 0); /* Check for any pending TX packets, and drop them. */ while (!data->txfree || data->txhead != data->txtail) { int tx = data->txtail; struct sk_buff *skb; skb = data->txskbs[tx]; data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN; data->txfree++; dev_kfree_skb(skb); } free_irq(data->irq_num, dev); /* Discard the RX ring. */ while (data->rxfree) { int rx = data->rxtail; struct sk_buff *skb; skb = data->rxskbs[rx]; data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN; data->rxfree--; dev_kfree_skb(skb); } dma_free_coherent(0, TSI108_RXRING_LEN * sizeof(rx_desc), data->rxring, data->rxdma); dma_free_coherent(0, TSI108_TXRING_LEN * sizeof(tx_desc), data->txring, data->txdma); return 0; } static void tsi108_init_mac(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE | TSI108_MAC_CFG2_PADCRC); TSI_WRITE(TSI108_EC_TXTHRESH, (192 << TSI108_EC_TXTHRESH_STARTFILL) | (192 << TSI108_EC_TXTHRESH_STOPFILL)); TSI_WRITE(TSI108_STAT_CARRYMASK1, ~(TSI108_STAT_CARRY1_RXBYTES | TSI108_STAT_CARRY1_RXPKTS | TSI108_STAT_CARRY1_RXFCS | TSI108_STAT_CARRY1_RXMCAST | TSI108_STAT_CARRY1_RXALIGN | TSI108_STAT_CARRY1_RXLENGTH | TSI108_STAT_CARRY1_RXRUNT | TSI108_STAT_CARRY1_RXJUMBO | TSI108_STAT_CARRY1_RXFRAG | TSI108_STAT_CARRY1_RXJABBER | TSI108_STAT_CARRY1_RXDROP)); TSI_WRITE(TSI108_STAT_CARRYMASK2, ~(TSI108_STAT_CARRY2_TXBYTES | TSI108_STAT_CARRY2_TXPKTS | TSI108_STAT_CARRY2_TXEXDEF | TSI108_STAT_CARRY2_TXEXCOL | TSI108_STAT_CARRY2_TXTCOL | TSI108_STAT_CARRY2_TXPAUSE)); TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN); TSI_WRITE(TSI108_MAC_CFG1, 0); TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE); TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT | TSI108_EC_TXQ_CFG_EOQ_OWN_INT | TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT << TSI108_EC_TXQ_CFG_SFNPORT)); TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT | TSI108_EC_RXQ_CFG_EOQ_OWN_INT | TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT << TSI108_EC_RXQ_CFG_SFNPORT)); TSI_WRITE(TSI108_EC_TXQ_BUFCFG, TSI108_EC_TXQ_BUFCFG_BURST256 | TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << TSI108_EC_TXQ_BUFCFG_SFNPORT)); TSI_WRITE(TSI108_EC_RXQ_BUFCFG, TSI108_EC_RXQ_BUFCFG_BURST256 | TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT << TSI108_EC_RXQ_BUFCFG_SFNPORT)); TSI_WRITE(TSI108_EC_INTMASK, ~0); } static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct tsi108_prv_data *data = netdev_priv(dev); unsigned long flags; int rc; spin_lock_irqsave(&data->txlock, flags); rc = mii_ethtool_gset(&data->mii_if, cmd); spin_unlock_irqrestore(&data->txlock, flags); return rc; } static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct tsi108_prv_data *data = netdev_priv(dev); unsigned long flags; int rc; spin_lock_irqsave(&data->txlock, flags); rc = mii_ethtool_sset(&data->mii_if, cmd); spin_unlock_irqrestore(&data->txlock, flags); return rc; } static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct tsi108_prv_data *data = netdev_priv(dev); if (!netif_running(dev)) return -EINVAL; return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL); } static const struct ethtool_ops tsi108_ethtool_ops = { .get_link = ethtool_op_get_link, .get_settings = tsi108_get_settings, .set_settings = tsi108_set_settings, }; static const struct net_device_ops tsi108_netdev_ops = { .ndo_open = tsi108_open, .ndo_stop = tsi108_close, .ndo_start_xmit = tsi108_send_packet, .ndo_set_multicast_list = tsi108_set_rx_mode, .ndo_get_stats = tsi108_get_stats, .ndo_do_ioctl = tsi108_do_ioctl, .ndo_set_mac_address = tsi108_set_mac, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, }; static int tsi108_init_one(struct platform_device *pdev) { struct net_device *dev = NULL; struct tsi108_prv_data *data = NULL; hw_info *einfo; int err = 0; einfo = pdev->dev.platform_data; if (NULL == einfo) { printk(KERN_ERR "tsi-eth %d: Missing additional data!\n", pdev->id); return -ENODEV; } /* Create an ethernet device instance */ dev = alloc_etherdev(sizeof(struct tsi108_prv_data)); if (!dev) { printk("tsi108_eth: Could not allocate a device structure\n"); return -ENOMEM; } printk("tsi108_eth%d: probe...\n", pdev->id); data = netdev_priv(dev); data->dev = dev; pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", pdev->id, einfo->regs, einfo->phyregs, einfo->phy, einfo->irq_num); data->regs = ioremap(einfo->regs, 0x400); if (NULL == data->regs) { err = -ENOMEM; goto regs_fail; } data->phyregs = ioremap(einfo->phyregs, 0x400); if (NULL == data->phyregs) { err = -ENOMEM; goto regs_fail; } /* MII setup */ data->mii_if.dev = dev; data->mii_if.mdio_read = tsi108_mdio_read; data->mii_if.mdio_write = tsi108_mdio_write; data->mii_if.phy_id = einfo->phy; data->mii_if.phy_id_mask = 0x1f; data->mii_if.reg_num_mask = 0x1f; data->phy = einfo->phy; data->phy_type = einfo->phy_type; data->irq_num = einfo->irq_num; data->id = pdev->id; netif_napi_add(dev, &data->napi, tsi108_poll, 64); dev->netdev_ops = &tsi108_netdev_ops; dev->ethtool_ops = &tsi108_ethtool_ops; /* Apparently, the Linux networking code won't use scatter-gather * if the hardware doesn't do checksums. However, it's faster * to checksum in place and use SG, as (among other reasons) * the cache won't be dirtied (which then has to be flushed * before DMA). The checksumming is done by the driver (via * a new function skb_csum_dev() in net/core/skbuff.c). */ dev->features = NETIF_F_HIGHDMA; spin_lock_init(&data->txlock); spin_lock_init(&data->misclock); tsi108_reset_ether(data); tsi108_kill_phy(dev); if ((err = tsi108_get_mac(dev)) != 0) { printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n", dev->name); goto register_fail; } tsi108_init_mac(dev); err = register_netdev(dev); if (err) { printk(KERN_ERR "%s: Cannot register net device, aborting.\n", dev->name); goto register_fail; } platform_set_drvdata(pdev, dev); printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n", dev->name, dev->dev_addr); #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif return 0; register_fail: iounmap(data->regs); iounmap(data->phyregs); regs_fail: free_netdev(dev); return err; } /* There's no way to either get interrupts from the PHY when * something changes, or to have the Tsi108 automatically communicate * with the PHY to reconfigure itself. * * Thus, we have to do it using a timer. */ static void tsi108_timed_checker(unsigned long dev_ptr) { struct net_device *dev = (struct net_device *)dev_ptr; struct tsi108_prv_data *data = netdev_priv(dev); tsi108_check_phy(dev); tsi108_check_rxring(dev); mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL); } static int tsi108_ether_init(void) { int ret; ret = platform_driver_register (&tsi_eth_driver); if (ret < 0){ printk("tsi108_ether_init: error initializing ethernet " "device\n"); return ret; } return 0; } static int tsi108_ether_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); struct tsi108_prv_data *priv = netdev_priv(dev); unregister_netdev(dev); tsi108_stop_ethernet(dev); platform_set_drvdata(pdev, NULL); iounmap(priv->regs); iounmap(priv->phyregs); free_netdev(dev); return 0; } static void tsi108_ether_exit(void) { platform_driver_unregister(&tsi_eth_driver); } module_init(tsi108_ether_init); module_exit(tsi108_ether_exit); MODULE_AUTHOR("Tundra Semiconductor Corporation"); MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:tsi-ethernet");