/*** -*- linux-c -*- ********************************************************** Driver for Atmel at76c502 at76c504 and at76c506 wireless cards. Copyright 2000-2001 ATMEL Corporation. Copyright 2003 Simon Kelley. This code was developed from version 2.1.1 of the Atmel drivers, released by Atmel corp. under the GPL in December 2002. It also includes code from the Linux aironet drivers (C) Benjamin Reed, and the Linux PCMCIA package, (C) David Hinds. For all queries about this code, please contact the current author, Simon Kelley and not Atmel Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Atmel wireless lan drivers; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ******************************************************************************/ #ifdef __IN_PCMCIA_PACKAGE__ #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "atmel.h" /*====================================================================*/ MODULE_AUTHOR("Simon Kelley"); MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards."); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ /* The event() function is this driver's Card Services event handler. It will be called by Card Services when an appropriate card status event is received. The config() and release() entry points are used to configure or release a socket, in response to card insertion and ejection events. They are invoked from the atmel_cs event handler. */ static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); /* The attach() and detach() entry points are used to create and destroy "instances" of the driver, where each instance represents everything needed to manage one actual PCMCIA card. */ static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; /*====================================================================== atmel_attach() creates an "instance" of the driver, allocating local data structures for one device. The device is registered with Card Services. The dev_link structure is initialized, but we don't actually configure the card at this point -- we wait until we receive a card insertion event. ======================================================================*/ static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "atmel_attach()\n"); /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost everything. In most clients, many details (i.e., number, sizes, and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ p_dev->conf.Attributes = 0; p_dev->conf.IntType = INT_MEMORY_AND_IO; /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { printk(KERN_ERR "atmel_cs: no memory for new device\n"); return -ENOMEM; } p_dev->priv = local; return atmel_config(p_dev); } /* atmel_attach */ /*====================================================================== This deletes a driver "instance". The device is de-registered with Card Services. If it has been released, all local data structures are freed. Otherwise, the structures will be freed when the device is released. ======================================================================*/ static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); atmel_release(link); kfree(link->priv); } /*====================================================================== atmel_config() is scheduled to run after a CARD_INSERTION event is received, to configure the PCMCIA socket, and to make the device available to the system. ======================================================================*/ /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) { struct pcmcia_device *link = (struct pcmcia_device *)arg; if (pcmcia_dev_present(link)) return 1; return 0; } static int atmel_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, unsigned int vcc, void *priv_data) { if (cfg->index == 0) return -ENODEV; /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { p_dev->conf.Attributes |= CONF_ENABLE_SPKR; p_dev->conf.Status = CCSR_AUDIO_ENA; } /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; if (!(io->flags & CISTPL_IO_8BIT)) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; if (!(io->flags & CISTPL_IO_16BIT)) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.BasePort1 = io->win[0].base; p_dev->io.NumPorts1 = io->win[0].len; if (io->nwin > 1) { p_dev->io.Attributes2 = p_dev->io.Attributes1; p_dev->io.BasePort2 = io->win[1].base; p_dev->io.NumPorts2 = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev, &p_dev->io); } static int atmel_config(struct pcmcia_device *link) { local_info_t *dev; int ret; struct pcmcia_device_id *did; dev = link->priv; did = dev_get_drvdata(&link->dev); dev_dbg(&link->dev, "atmel_config\n"); /* In this loop, we scan the CIS for configuration table entries, each of which describes a valid card configuration, including voltage, IO window, memory window, and interrupt settings. We make no assumptions about the card to be configured: we use just the information available in the CIS. In an ideal world, this would work for any PCMCIA card, but it requires a complete and accurate CIS. In practice, a driver usually "knows" most of these things without consulting the CIS, and most client drivers will only use the CIS to fill in implementation-defined details. */ if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; if (!link->irq) { dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); goto failed; } /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ ret = pcmcia_request_configuration(link, &link->conf); if (ret) goto failed; ((local_info_t*)link->priv)->eth_dev = init_atmel_card(link->irq, link->resource[0]->start, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &link->dev, card_present, link); if (!((local_info_t*)link->priv)->eth_dev) goto failed; return 0; failed: atmel_release(link); return -ENODEV; } /*====================================================================== After a card is removed, atmel_release() will unregister the device, and release the PCMCIA configuration. If the device is still open, this will be postponed until it is closed. ======================================================================*/ static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; dev_dbg(&link->dev, "atmel_release\n"); if (dev) stop_atmel_card(dev); ((local_info_t*)link->priv)->eth_dev = NULL; pcmcia_disable_device(link); } static int atmel_suspend(struct pcmcia_device *link) { local_info_t *local = link->priv; netif_device_detach(local->eth_dev); return 0; } static int atmel_resume(struct pcmcia_device *link) { local_info_t *local = link->priv; atmel_open(local->eth_dev); netif_device_attach(local->eth_dev); return 0; } /*====================================================================*/ /* We use the driver_info field to store the correct firmware type for a card. */ #define PCMCIA_DEVICE_MANF_CARD_INFO(manf, card, info) { \ .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \ PCMCIA_DEV_ID_MATCH_CARD_ID, \ .manf_id = (manf), \ .card_id = (card), \ .driver_info = (kernel_ulong_t)(info), } #define PCMCIA_DEVICE_PROD_ID12_INFO(v1, v2, vh1, vh2, info) { \ .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \ PCMCIA_DEV_ID_MATCH_PROD_ID2, \ .prod_id = { (v1), (v2), NULL, NULL }, \ .prod_id_hash = { (vh1), (vh2), 0, 0 }, \ .driver_info = (kernel_ulong_t)(info), } static struct pcmcia_device_id atmel_ids[] = { PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0620, ATMEL_FW_TYPE_502_3COM), PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0696, ATMEL_FW_TYPE_502_3COM), PCMCIA_DEVICE_MANF_CARD_INFO(0x01bf, 0x3302, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_MANF_CARD_INFO(0xd601, 0x0007, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_D", 0xabda4164, 0x3675d704, ATMEL_FW_TYPE_502D), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_E", 0xabda4164, 0x4172e792, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504_R", 0xabda4164, 0x917f3d72, ATMEL_FW_TYPE_504_2958), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504", 0xabda4164, 0x5040670a, ATMEL_FW_TYPE_504), PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f, ATMEL_FW_TYPE_504A_2958), PCMCIA_DEVICE_PROD_ID12_INFO("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN Card S", 0x5b878724, 0x5fba533a, ATMEL_FW_TYPE_504_2958), PCMCIA_DEVICE_PROD_ID12_INFO("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W", 0xc4f8b18b, 0x30f38774, ATMEL_FW_TYPE_502D), PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377, ATMEL_FW_TYPE_502), PCMCIA_DEVICE_PROD_ID12_INFO("Wireless", "PC_CARD", 0xa407ecdd, 0x119f6314, ATMEL_FW_TYPE_502D), PCMCIA_DEVICE_PROD_ID12_INFO("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4, ATMEL_FW_TYPE_502D), PCMCIA_DEVICE_PROD_ID12_INFO("LG", "LW2100N", 0xb474d43a, 0x6b1fec94, ATMEL_FW_TYPE_502E), PCMCIA_DEVICE_NULL }; MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, .drv = { .name = "atmel_cs", }, .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, .suspend = atmel_suspend, .resume = atmel_resume, }; static int atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } static void atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } /* This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. In addition: Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ module_init(atmel_cs_init); module_exit(atmel_cs_cleanup);