/* * QLOGIC LINUX SOFTWARE * * QLogic ISP2x00 device driver for Linux 2.6.x * Copyright (C) 2003-2004 QLogic Corporation * (www.qlogic.com) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * */ #include "qla_def.h" #include #include #include #include #include #include #include #include /* * Driver version */ char qla2x00_version_str[40]; /* * SRB allocation cache */ static kmem_cache_t *srb_cachep; /* * Ioctl related information. */ static int num_hosts; int ql2xlogintimeout = 20; module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xlogintimeout, "Login timeout value in seconds."); int qlport_down_retry = 30; module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(qlport_down_retry, "Maximum number of command retries to a port that returns" "a PORT-DOWN status."); int ql2xplogiabsentdevice; module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xplogiabsentdevice, "Option to enable PLOGI to devices that are not present after " "a Fabric scan. This is needed for several broken switches." "Default is 0 - no PLOGI. 1 - perfom PLOGI."); int ql2xenablezio = 0; module_param(ql2xenablezio, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xenablezio, "Option to enable ZIO:If 1 then enable it otherwise" " use the default set in the NVRAM." " Default is 0 : disabled"); int ql2xintrdelaytimer = 10; module_param(ql2xintrdelaytimer, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xintrdelaytimer, "ZIO: Waiting time for Firmware before it generates an " "interrupt to the host to notify completion of request."); int ql2xloginretrycount = 0; module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); /* * SCSI host template entry points */ static int qla2xxx_slave_configure(struct scsi_device * device); static int qla2xxx_slave_alloc(struct scsi_device *); static void qla2xxx_slave_destroy(struct scsi_device *); static int qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *)); static int qla2xxx_eh_abort(struct scsi_cmnd *); static int qla2xxx_eh_device_reset(struct scsi_cmnd *); static int qla2xxx_eh_bus_reset(struct scsi_cmnd *); static int qla2xxx_eh_host_reset(struct scsi_cmnd *); static int qla2x00_loop_reset(scsi_qla_host_t *ha); static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *); static struct scsi_host_template qla2x00_driver_template = { .module = THIS_MODULE, .name = "qla2xxx", .queuecommand = qla2x00_queuecommand, .eh_abort_handler = qla2xxx_eh_abort, .eh_device_reset_handler = qla2xxx_eh_device_reset, .eh_bus_reset_handler = qla2xxx_eh_bus_reset, .eh_host_reset_handler = qla2xxx_eh_host_reset, .slave_configure = qla2xxx_slave_configure, .slave_alloc = qla2xxx_slave_alloc, .slave_destroy = qla2xxx_slave_destroy, .this_id = -1, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, .sg_tablesize = SG_ALL, /* * The RISC allows for each command to transfer (2^32-1) bytes of data, * which equates to 0x800000 sectors. */ .max_sectors = 0xFFFF, }; static struct scsi_transport_template *qla2xxx_transport_template = NULL; /* TODO Convert to inlines * * Timer routines */ #define WATCH_INTERVAL 1 /* number of seconds */ static void qla2x00_timer(scsi_qla_host_t *); static __inline__ void qla2x00_start_timer(scsi_qla_host_t *, void *, unsigned long); static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long); static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *); static inline void qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval) { init_timer(&ha->timer); ha->timer.expires = jiffies + interval * HZ; ha->timer.data = (unsigned long)ha; ha->timer.function = (void (*)(unsigned long))func; add_timer(&ha->timer); ha->timer_active = 1; } static inline void qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval) { mod_timer(&ha->timer, jiffies + interval * HZ); } static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *ha) { del_timer_sync(&ha->timer); ha->timer_active = 0; } static int qla2x00_do_dpc(void *data); static void qla2x00_rst_aen(scsi_qla_host_t *); static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); static void qla2x00_mem_free(scsi_qla_host_t *ha); static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha); static void qla2x00_free_sp_pool(scsi_qla_host_t *ha); static srb_t *qla2x00_get_new_sp(scsi_qla_host_t *); static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *); void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *); /* -------------------------------------------------------------------------- */ static char * qla2x00_get_pci_info_str(struct scsi_qla_host *ha, char *str) { static char *pci_bus_modes[] = { "33", "66", "100", "133", }; uint16_t pci_bus; strcpy(str, "PCI"); pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9; if (pci_bus) { strcat(str, "-X ("); strcat(str, pci_bus_modes[pci_bus]); } else { pci_bus = (ha->pci_attr & BIT_8) >> 8; strcat(str, " ("); strcat(str, pci_bus_modes[pci_bus]); } strcat(str, " MHz)"); return (str); } char * qla2x00_get_fw_version_str(struct scsi_qla_host *ha, char *str) { char un_str[10]; sprintf(str, "%d.%02d.%02d ", ha->fw_major_version, ha->fw_minor_version, ha->fw_subminor_version); if (ha->fw_attributes & BIT_9) { strcat(str, "FLX"); return (str); } switch (ha->fw_attributes & 0xFF) { case 0x7: strcat(str, "EF"); break; case 0x17: strcat(str, "TP"); break; case 0x37: strcat(str, "IP"); break; case 0x77: strcat(str, "VI"); break; default: sprintf(un_str, "(%x)", ha->fw_attributes); strcat(str, un_str); break; } if (ha->fw_attributes & 0x100) strcat(str, "X"); return (str); } /************************************************************************** * qla2x00_queuecommand * * Description: * Queue a command to the controller. * * Input: * cmd - pointer to Scsi cmd structure * fn - pointer to Scsi done function * * Returns: * 0 - Always * * Note: * The mid-level driver tries to ensures that queuecommand never gets invoked * concurrently with itself or the interrupt handler (although the * interrupt handler may call this routine as part of request-completion * handling). **************************************************************************/ static int qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; srb_t *sp; int rval; if (!fcport) { cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&ha->loop_state) == LOOP_DEAD) { cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } goto qc_host_busy; } spin_unlock_irq(ha->host->host_lock); /* Allocate a command packet from the "sp" pool. */ if ((sp = qla2x00_get_new_sp(ha)) == NULL) { goto qc_host_busy_lock; } sp->ha = ha; sp->fcport = fcport; sp->cmd = cmd; sp->flags = 0; CMD_SP(cmd) = (void *)sp; cmd->scsi_done = done; rval = qla2x00_start_scsi(sp); if (rval != QLA_SUCCESS) goto qc_host_busy_free_sp; /* Manage unprocessed RIO/ZIO commands in response queue. */ if (ha->flags.online && ha->flags.process_response_queue && ha->response_ring_ptr->signature != RESPONSE_PROCESSED) { unsigned long flags; spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_process_response_queue(ha); spin_unlock_irqrestore(&ha->hardware_lock, flags); } spin_lock_irq(ha->host->host_lock); return 0; qc_host_busy_free_sp: qla2x00_sp_free_dma(ha, sp); CMD_SP(cmd) = NULL; mempool_free(sp, ha->srb_mempool); qc_host_busy_lock: spin_lock_irq(ha->host->host_lock); qc_host_busy: return SCSI_MLQUEUE_HOST_BUSY; qc_fail_command: done(cmd); return 0; } /* * qla2x00_eh_wait_on_command * Waits for the command to be returned by the Firmware for some * max time. * * Input: * ha = actual ha whose done queue will contain the command * returned by firmware. * cmd = Scsi Command to wait on. * flag = Abort/Reset(Bus or Device Reset) * * Return: * Not Found : 0 * Found : 1 */ static int qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) { #define ABORT_POLLING_PERIOD HZ #define ABORT_WAIT_ITER ((10 * HZ) / (ABORT_POLLING_PERIOD)) unsigned long wait_iter = ABORT_WAIT_ITER; int ret = QLA_SUCCESS; while (CMD_SP(cmd)) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(ABORT_POLLING_PERIOD); if (--wait_iter) break; } if (CMD_SP(cmd)) ret = QLA_FUNCTION_FAILED; return ret; } /* * qla2x00_wait_for_hba_online * Wait till the HBA is online after going through * <= MAX_RETRIES_OF_ISP_ABORT or * finally HBA is disabled ie marked offline * * Input: * ha - pointer to host adapter structure * * Note: * Does context switching-Release SPIN_LOCK * (if any) before calling this routine. * * Return: * Success (Adapter is online) : 0 * Failed (Adapter is offline/disabled) : 1 */ static int qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) { int return_status; unsigned long wait_online; wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) || test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) || ha->dpc_active) && time_before(jiffies, wait_online)) { msleep(1000); } if (ha->flags.online) return_status = QLA_SUCCESS; else return_status = QLA_FUNCTION_FAILED; DEBUG2(printk("%s return_status=%d\n",__func__,return_status)); return (return_status); } /* * qla2x00_wait_for_loop_ready * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop * to be in LOOP_READY state. * Input: * ha - pointer to host adapter structure * * Note: * Does context switching-Release SPIN_LOCK * (if any) before calling this routine. * * * Return: * Success (LOOP_READY) : 0 * Failed (LOOP_NOT_READY) : 1 */ static inline int qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha) { int return_status = QLA_SUCCESS; unsigned long loop_timeout ; /* wait for 5 min at the max for loop to be ready */ loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); while ((!atomic_read(&ha->loop_down_timer) && atomic_read(&ha->loop_state) == LOOP_DOWN) || atomic_read(&ha->loop_state) != LOOP_READY) { msleep(1000); if (time_after_eq(jiffies, loop_timeout)) { return_status = QLA_FUNCTION_FAILED; break; } } return (return_status); } /************************************************************************** * qla2xxx_eh_abort * * Description: * The abort function will abort the specified command. * * Input: * cmd = Linux SCSI command packet to be aborted. * * Returns: * Either SUCCESS or FAILED. * * Note: **************************************************************************/ int qla2xxx_eh_abort(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); srb_t *sp; int ret, i; unsigned int id, lun; unsigned long serial; unsigned long flags; if (!CMD_SP(cmd)) return FAILED; ret = FAILED; id = cmd->device->id; lun = cmd->device->lun; serial = cmd->serial_number; /* Check active list for command command. */ spin_lock_irqsave(&ha->hardware_lock, flags); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; if (sp == NULL) continue; if (sp->cmd != cmd) continue; DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld " "sp->state=%x\n", __func__, ha->host_no, sp, serial, sp->state)); DEBUG3(qla2x00_print_scsi_cmd(cmd);) spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla2x00_abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); ret = SUCCESS; } spin_lock_irqsave(&ha->hardware_lock, flags); break; } spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for the command to be returned. */ if (ret == SUCCESS) { if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } } qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no, id, lun, serial, ret); return ret; } /************************************************************************** * qla2x00_eh_wait_for_pending_target_commands * * Description: * Waits for all the commands to come back from the specified target. * * Input: * ha - pointer to scsi_qla_host structure. * t - target * Returns: * Either SUCCESS or FAILED. * * Note: **************************************************************************/ static int qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) { int cnt; int status; srb_t *sp; struct scsi_cmnd *cmd; unsigned long flags; status = 0; /* * Waiting for all commands for the designated target in the active * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; spin_unlock_irqrestore(&ha->hardware_lock, flags); if (cmd->device->id == t) { if (!qla2x00_eh_wait_on_command(ha, cmd)) { status = 1; break; } } } else { spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); } /************************************************************************** * qla2xxx_eh_device_reset * * Description: * The device reset function will reset the target and abort any * executing commands. * * NOTE: The use of SP is undefined within this context. Do *NOT* * attempt to use this value, even if you determine it is * non-null. * * Input: * cmd = Linux SCSI command packet of the command that cause the * bus device reset. * * Returns: * SUCCESS/FAILURE (defined as macro in scsi.h). * **************************************************************************/ int qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; ret = FAILED; id = cmd->device->id; lun = cmd->device->lun; serial = cmd->serial_number; sp = (srb_t *) CMD_SP(cmd); if (!sp || !fcport) return ret; qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun); if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_dev_reset_done; if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) { if (qla2x00_device_reset(ha, fcport) == 0) ret = SUCCESS; #if defined(LOGOUT_AFTER_DEVICE_RESET) if (ret == SUCCESS) { if (fcport->flags & FC_FABRIC_DEVICE) { qla2x00_fabric_logout(ha, fcport->loop_id); qla2x00_mark_device_lost(ha, fcport); } } #endif } else { DEBUG2(printk(KERN_INFO "%s failed: loop not ready\n",__func__);) } if (ret == FAILED) { DEBUG3(printk("%s(%ld): device reset failed\n", __func__, ha->host_no)); qla_printk(KERN_INFO, ha, "%s: device reset failed\n", __func__); goto eh_dev_reset_done; } /* * If we are coming down the EH path, wait for all commands to * complete for the device. */ if (cmd->device->host->eh_active) { if (qla2x00_eh_wait_for_pending_target_commands(ha, id)) ret = FAILED; if (ret == FAILED) { DEBUG3(printk("%s(%ld): failed while waiting for " "commands\n", __func__, ha->host_no)); qla_printk(KERN_INFO, ha, "%s: failed while waiting for commands\n", __func__); goto eh_dev_reset_done; } } qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no, id, lun); eh_dev_reset_done: return ret; } /************************************************************************** * qla2x00_eh_wait_for_pending_commands * * Description: * Waits for all the commands to come back from the specified host. * * Input: * ha - pointer to scsi_qla_host structure. * * Returns: * 1 : SUCCESS * 0 : FAILED * * Note: **************************************************************************/ static int qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) { int cnt; int status; srb_t *sp; struct scsi_cmnd *cmd; unsigned long flags; status = 1; /* * Waiting for all commands for the designated target in the active * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; spin_unlock_irqrestore(&ha->hardware_lock, flags); status = qla2x00_eh_wait_on_command(ha, cmd); if (status == 0) break; } else { spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); } /************************************************************************** * qla2xxx_eh_bus_reset * * Description: * The bus reset function will reset the bus and abort any executing * commands. * * Input: * cmd = Linux SCSI command packet of the command that cause the * bus reset. * * Returns: * SUCCESS/FAILURE (defined as macro in scsi.h). * **************************************************************************/ int qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; ret = FAILED; id = cmd->device->id; lun = cmd->device->lun; serial = cmd->serial_number; sp = (srb_t *) CMD_SP(cmd); if (!sp || !fcport) return ret; qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun); if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { DEBUG2(printk("%s failed:board disabled\n",__func__)); goto eh_bus_reset_done; } if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) { if (qla2x00_loop_reset(ha) == QLA_SUCCESS) ret = SUCCESS; } if (ret == FAILED) goto eh_bus_reset_done; /* Waiting for our command in done_queue to be returned to OS.*/ if (cmd->device->host->eh_active) if (!qla2x00_eh_wait_for_pending_commands(ha)) ret = FAILED; eh_bus_reset_done: qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, (ret == FAILED) ? "failed" : "succeded"); return ret; } /************************************************************************** * qla2xxx_eh_host_reset * * Description: * The reset function will reset the Adapter. * * Input: * cmd = Linux SCSI command packet of the command that cause the * adapter reset. * * Returns: * Either SUCCESS or FAILED. * * Note: **************************************************************************/ int qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; ret = FAILED; id = cmd->device->id; lun = cmd->device->lun; serial = cmd->serial_number; sp = (srb_t *) CMD_SP(cmd); if (!sp || !fcport) return ret; qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun); if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_host_reset_lock; /* * Fixme-may be dpc thread is active and processing * loop_resync,so wait a while for it to * be completed and then issue big hammer.Otherwise * it may cause I/O failure as big hammer marks the * devices as lost kicking of the port_down_timer * while dpc is stuck for the mailbox to complete. */ qla2x00_wait_for_loop_ready(ha); set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); if (qla2x00_abort_isp(ha)) { clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); /* failed. schedule dpc to try */ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_host_reset_lock; } clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); /* Waiting for our command in done_queue to be returned to OS.*/ if (qla2x00_eh_wait_for_pending_commands(ha)) ret = SUCCESS; eh_host_reset_lock: qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, (ret == FAILED) ? "failed" : "succeded"); return ret; } /* * qla2x00_loop_reset * Issue loop reset. * * Input: * ha = adapter block pointer. * * Returns: * 0 = success */ static int qla2x00_loop_reset(scsi_qla_host_t *ha) { int status = QLA_SUCCESS; struct fc_port *fcport; if (ha->flags.enable_lip_reset) { status = qla2x00_lip_reset(ha); } if (status == QLA_SUCCESS && ha->flags.enable_target_reset) { list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; status = qla2x00_target_reset(ha, fcport); if (status != QLA_SUCCESS) break; } } if (status == QLA_SUCCESS && ((!ha->flags.enable_target_reset && !ha->flags.enable_lip_reset) || ha->flags.enable_lip_full_login)) { status = qla2x00_full_login_lip(ha); } /* Issue marker command only when we are going to start the I/O */ ha->marker_needed = 1; if (status) { /* Empty */ DEBUG2_3(printk("%s(%ld): **** FAILED ****\n", __func__, ha->host_no);) } else { /* Empty */ DEBUG3(printk("%s(%ld): exiting normally.\n", __func__, ha->host_no);) } return(status); } /* * qla2x00_device_reset * Issue bus device reset message to the target. * * Input: * ha = adapter block pointer. * t = SCSI ID. * TARGET_QUEUE_LOCK must be released. * ADAPTER_STATE_LOCK must be released. * * Context: * Kernel context. */ static int qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport) { /* Abort Target command will clear Reservation */ return qla2x00_abort_target(reset_fcport); } static int qla2xxx_slave_alloc(struct scsi_device *sdev) { scsi_qla_host_t *ha = to_qla_host(sdev->host); struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); fc_port_t *fcport; int found; if (!rport) return -ENXIO; found = 0; list_for_each_entry(fcport, &ha->fcports, list) { if (rport->port_name == be64_to_cpu(*(uint64_t *)fcport->port_name)) { found++; break; } } if (!found) return -ENXIO; sdev->hostdata = fcport; return 0; } static int qla2xxx_slave_configure(struct scsi_device *sdev) { scsi_qla_host_t *ha = to_qla_host(sdev->host); struct fc_rport *rport = starget_to_rport(sdev->sdev_target); if (sdev->tagged_supported) scsi_activate_tcq(sdev, 32); else scsi_deactivate_tcq(sdev, 32); rport->dev_loss_tmo = ha->port_down_retry_count + 5; return 0; } static void qla2xxx_slave_destroy(struct scsi_device *sdev) { sdev->hostdata = NULL; } /** * qla2x00_config_dma_addressing() - Configure OS DMA addressing method. * @ha: HA context * * At exit, the @ha's flags.enable_64bit_addressing set to indicated * supported addressing method. */ static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha) { /* Assume 32bit DMA address */ ha->flags.enable_64bit_addressing = 0; ha->calc_request_entries = qla2x00_calc_iocbs_32; ha->build_scsi_iocbs = qla2x00_build_scsi_iocbs_32; /* * Given the two variants pci_set_dma_mask(), allow the compiler to * assist in setting the proper dma mask. */ if (sizeof(dma_addr_t) > 4) { if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) { ha->flags.enable_64bit_addressing = 1; ha->calc_request_entries = qla2x00_calc_iocbs_64; ha->build_scsi_iocbs = qla2x00_build_scsi_iocbs_64; if (pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) { qla_printk(KERN_DEBUG, ha, "Failed to set 64 bit PCI consistent mask; " "using 32 bit.\n"); pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK); } } else { qla_printk(KERN_DEBUG, ha, "Failed to set 64 bit PCI DMA mask, falling back " "to 32 bit MASK.\n"); pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK); } } else { pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK); } } static int qla2x00_iospace_config(scsi_qla_host_t *ha) { unsigned long pio, pio_len, pio_flags; unsigned long mmio, mmio_len, mmio_flags; /* We only need PIO for Flash operations on ISP2312 v2 chips. */ pio = pci_resource_start(ha->pdev, 0); pio_len = pci_resource_len(ha->pdev, 0); pio_flags = pci_resource_flags(ha->pdev, 0); if (pio_flags & IORESOURCE_IO) { if (pio_len < MIN_IOBASE_LEN) { qla_printk(KERN_WARNING, ha, "Invalid PCI I/O region size (%s)...\n", pci_name(ha->pdev)); pio = 0; } } else { qla_printk(KERN_WARNING, ha, "region #0 not a PIO resource (%s)...\n", pci_name(ha->pdev)); pio = 0; } /* Use MMIO operations for all accesses. */ mmio = pci_resource_start(ha->pdev, 1); mmio_len = pci_resource_len(ha->pdev, 1); mmio_flags = pci_resource_flags(ha->pdev, 1); if (!(mmio_flags & IORESOURCE_MEM)) { qla_printk(KERN_ERR, ha, "region #0 not an MMIO resource (%s), aborting\n", pci_name(ha->pdev)); goto iospace_error_exit; } if (mmio_len < MIN_IOBASE_LEN) { qla_printk(KERN_ERR, ha, "Invalid PCI mem region size (%s), aborting\n", pci_name(ha->pdev)); goto iospace_error_exit; } if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) { qla_printk(KERN_WARNING, ha, "Failed to reserve PIO/MMIO regions (%s)\n", pci_name(ha->pdev)); goto iospace_error_exit; } ha->pio_address = pio; ha->pio_length = pio_len; ha->iobase = ioremap(mmio, MIN_IOBASE_LEN); if (!ha->iobase) { qla_printk(KERN_ERR, ha, "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev)); goto iospace_error_exit; } return (0); iospace_error_exit: return (-ENOMEM); } /* * PCI driver interface */ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) { int ret; device_reg_t __iomem *reg; struct Scsi_Host *host; scsi_qla_host_t *ha; unsigned long flags = 0; unsigned long wait_switch = 0; char pci_info[20]; char fw_str[30]; fc_port_t *fcport; if (pci_enable_device(pdev)) return -1; host = scsi_host_alloc(&qla2x00_driver_template, sizeof(scsi_qla_host_t)); if (host == NULL) { printk(KERN_WARNING "qla2xxx: Couldn't allocate host from scsi layer!\n"); goto probe_disable_device; } /* Clear our data area */ ha = (scsi_qla_host_t *)host->hostdata; memset(ha, 0, sizeof(scsi_qla_host_t)); ha->pdev = pdev; ha->host = host; ha->host_no = host->host_no; ha->brd_info = brd_info; sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no); /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret != 0) { goto probe_alloc_failed; } /* Sanitize the information from PCI BIOS. */ host->irq = pdev->irq; qla_printk(KERN_INFO, ha, "Found an %s, irq %d, iobase 0x%p\n", ha->brd_info->isp_name, host->irq, ha->iobase); spin_lock_init(&ha->hardware_lock); ha->prev_topology = 0; ha->ports = MAX_BUSES; if (IS_QLA2100(ha)) { host->max_id = MAX_TARGETS_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; ha->request_q_length = REQUEST_ENTRY_CNT_2100; ha->response_q_length = RESPONSE_ENTRY_CNT_2100; ha->last_loop_id = SNS_LAST_LOOP_ID_2100; host->sg_tablesize = 32; } else if (IS_QLA2200(ha)) { host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; ha->request_q_length = REQUEST_ENTRY_CNT_2200; ha->response_q_length = RESPONSE_ENTRY_CNT_2100; ha->last_loop_id = SNS_LAST_LOOP_ID_2100; } else /*if (IS_QLA2300(ha))*/ { host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; ha->request_q_length = REQUEST_ENTRY_CNT_2200; ha->response_q_length = RESPONSE_ENTRY_CNT_2300; ha->last_loop_id = SNS_LAST_LOOP_ID_2300; } host->can_queue = ha->request_q_length + 128; /* load the F/W, read paramaters, and init the H/W */ ha->instance = num_hosts; init_MUTEX(&ha->mbx_cmd_sem); init_MUTEX_LOCKED(&ha->mbx_intr_sem); INIT_LIST_HEAD(&ha->list); INIT_LIST_HEAD(&ha->fcports); INIT_LIST_HEAD(&ha->rscn_fcports); /* * These locks are used to prevent more than one CPU * from modifying the queue at the same time. The * higher level "host_lock" will reduce most * contention for these locks. */ spin_lock_init(&ha->mbx_reg_lock); ha->dpc_pid = -1; init_completion(&ha->dpc_inited); init_completion(&ha->dpc_exited); qla2x00_config_dma_addressing(ha); if (qla2x00_mem_alloc(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for adapter\n"); goto probe_alloc_failed; } pci_set_drvdata(pdev, ha); host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = ha->instance; host->max_cmd_len = MAX_CMDSZ; host->max_channel = ha->ports - 1; host->max_lun = MAX_LUNS; host->transportt = qla2xxx_transport_template; if (scsi_add_host(host, &pdev->dev)) goto probe_alloc_failed; qla2x00_alloc_sysfs_attr(ha); if (qla2x00_initialize_adapter(ha) && !(ha->device_flags & DFLG_NO_CABLE)) { qla_printk(KERN_WARNING, ha, "Failed to initialize adapter\n"); DEBUG2(printk("scsi(%ld): Failed to initialize adapter - " "Adapter flags %x.\n", ha->host_no, ha->device_flags)); goto probe_failed; } qla2x00_init_host_attr(ha); /* * Startup the kernel thread for this host adapter */ ha->dpc_should_die = 0; ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0); if (ha->dpc_pid < 0) { qla_printk(KERN_WARNING, ha, "Unable to start DPC thread!\n"); goto probe_failed; } wait_for_completion(&ha->dpc_inited); if (IS_QLA2100(ha) || IS_QLA2200(ha)) ret = request_irq(host->irq, qla2100_intr_handler, SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha); else ret = request_irq(host->irq, qla2300_intr_handler, SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha); if (ret != 0) { qla_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d already in use.\n", host->irq); goto probe_failed; } /* Initialized the timer */ qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL); DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", ha->host_no, ha)); reg = ha->iobase; /* Disable ISP interrupts. */ qla2x00_disable_intrs(ha); /* Ensure mailbox registers are free. */ spin_lock_irqsave(&ha->hardware_lock, flags); WRT_REG_WORD(®->semaphore, 0); WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT); /* Enable proper parity */ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) { if (IS_QLA2300(ha)) /* SRAM parity */ WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x1)); else /* SRAM, Instruction RAM and GP RAM parity */ WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x7)); } spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Enable chip interrupts. */ qla2x00_enable_intrs(ha); /* v2.19.5b6 */ /* * Wait around max loop_reset_delay secs for the devices to come * on-line. We don't want Linux scanning before we are ready. * */ for (wait_switch = jiffies + (ha->loop_reset_delay * HZ); time_before(jiffies,wait_switch) && !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES)) && (ha->device_flags & SWITCH_FOUND) ;) { qla2x00_check_fabric_devices(ha); msleep(10); } ha->flags.init_done = 1; num_hosts++; qla_printk(KERN_INFO, ha, "\n" " QLogic Fibre Channel HBA Driver: %s\n" " QLogic %s - %s\n" " %s: %s @ %s hdma%c, host#=%ld, fw=%s\n", qla2x00_version_str, ha->model_number, ha->model_desc ? ha->model_desc: "", ha->brd_info->isp_name, qla2x00_get_pci_info_str(ha, pci_info), pci_name(ha->pdev), ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no, qla2x00_get_fw_version_str(ha, fw_str)); /* Go with fc_rport registration. */ list_for_each_entry(fcport, &ha->fcports, list) qla2x00_reg_remote_port(ha, fcport); return 0; probe_failed: fc_remove_host(ha->host); scsi_remove_host(host); probe_alloc_failed: qla2x00_free_device(ha); scsi_host_put(host); probe_disable_device: pci_disable_device(pdev); return -1; } EXPORT_SYMBOL_GPL(qla2x00_probe_one); void qla2x00_remove_one(struct pci_dev *pdev) { scsi_qla_host_t *ha; ha = pci_get_drvdata(pdev); qla2x00_free_sysfs_attr(ha); fc_remove_host(ha->host); scsi_remove_host(ha->host); qla2x00_free_device(ha); scsi_host_put(ha->host); pci_set_drvdata(pdev, NULL); } EXPORT_SYMBOL_GPL(qla2x00_remove_one); static void qla2x00_free_device(scsi_qla_host_t *ha) { int ret; /* Abort any outstanding IO descriptors. */ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) qla2x00_cancel_io_descriptors(ha); /* turn-off interrupts on the card */ if (ha->interrupts_on) qla2x00_disable_intrs(ha); /* Disable timer */ if (ha->timer_active) qla2x00_stop_timer(ha); /* Kill the kernel thread for this host */ if (ha->dpc_pid >= 0) { ha->dpc_should_die = 1; wmb(); ret = kill_proc(ha->dpc_pid, SIGHUP, 1); if (ret) { qla_printk(KERN_ERR, ha, "Unable to signal DPC thread -- (%d)\n", ret); /* TODO: SOMETHING MORE??? */ } else { wait_for_completion(&ha->dpc_exited); } } qla2x00_mem_free(ha); ha->flags.online = 0; /* Detach interrupts */ if (ha->pdev->irq) free_irq(ha->pdev->irq, ha); /* release io space registers */ if (ha->iobase) iounmap(ha->iobase); pci_release_regions(ha->pdev); pci_disable_device(ha->pdev); } /* * qla2x00_mark_device_lost Updates fcport state when device goes offline. * * Input: ha = adapter block pointer. fcport = port structure pointer. * * Return: None. * * Context: */ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, int do_login) { if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport) fc_remote_port_block(fcport->rport); /* * We may need to retry the login, so don't change the state of the * port but do the retries. */ if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD) atomic_set(&fcport->state, FCS_DEVICE_LOST); if (!do_login) return; if (fcport->login_retry == 0) { fcport->login_retry = ha->login_retry_count; set_bit(RELOGIN_NEEDED, &ha->dpc_flags); DEBUG(printk("scsi(%ld): Port login retry: " "%02x%02x%02x%02x%02x%02x%02x%02x, " "id = 0x%04x retry cnt=%d\n", ha->host_no, fcport->port_name[0], fcport->port_name[1], fcport->port_name[2], fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], fcport->port_name[6], fcport->port_name[7], fcport->loop_id, fcport->login_retry)); } } /* * qla2x00_mark_all_devices_lost * Updates fcport state when device goes offline. * * Input: * ha = adapter block pointer. * fcport = port structure pointer. * * Return: * None. * * Context: */ void qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) { fc_port_t *fcport; list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; /* * No point in marking the device as lost, if the device is * already DEAD. */ if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD) continue; if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport) fc_remote_port_block(fcport->rport); atomic_set(&fcport->state, FCS_DEVICE_LOST); } } /* * qla2x00_mem_alloc * Allocates adapter memory. * * Returns: * 0 = success. * 1 = failure. */ static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *ha) { char name[16]; uint8_t status = 1; int retry= 10; do { /* * This will loop only once if everything goes well, else some * number of retries will be performed to get around a kernel * bug where available mem is not allocated until after a * little delay and a retry. */ ha->request_ring = dma_alloc_coherent(&ha->pdev->dev, (ha->request_q_length + 1) * sizeof(request_t), &ha->request_dma, GFP_KERNEL); if (ha->request_ring == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - request_ring\n"); qla2x00_mem_free(ha); msleep(100); continue; } ha->response_ring = dma_alloc_coherent(&ha->pdev->dev, (ha->response_q_length + 1) * sizeof(response_t), &ha->response_dma, GFP_KERNEL); if (ha->response_ring == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - response_ring\n"); qla2x00_mem_free(ha); msleep(100); continue; } ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE, &ha->gid_list_dma, GFP_KERNEL); if (ha->gid_list == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - gid_list\n"); qla2x00_mem_free(ha); msleep(100); continue; } ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev, sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL); if (ha->rlc_rsp == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - rlc"); qla2x00_mem_free(ha); msleep(100); continue; } snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no); ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev, DMA_POOL_SIZE, 8, 0); if (ha->s_dma_pool == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - s_dma_pool\n"); qla2x00_mem_free(ha); msleep(100); continue; } /* get consistent memory allocated for init control block */ ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &ha->init_cb_dma); if (ha->init_cb == NULL) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - init_cb\n"); qla2x00_mem_free(ha); msleep(100); continue; } memset(ha->init_cb, 0, sizeof(init_cb_t)); /* Get consistent memory allocated for Get Port Database cmd */ ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &ha->iodesc_pd_dma); if (ha->iodesc_pd == NULL) { /* error */ qla_printk(KERN_WARNING, ha, "Memory Allocation failed - iodesc_pd\n"); qla2x00_mem_free(ha); msleep(100); continue; } memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE); /* Allocate ioctl related memory. */ if (qla2x00_alloc_ioctl_mem(ha)) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - ioctl_mem\n"); qla2x00_mem_free(ha); msleep(100); continue; } if (qla2x00_allocate_sp_pool(ha)) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - " "qla2x00_allocate_sp_pool()\n"); qla2x00_mem_free(ha); msleep(100); continue; } /* Allocate memory for SNS commands */ if (IS_QLA2100(ha) || IS_QLA2200(ha)) { /* Get consistent memory allocated for SNS commands */ ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL); if (ha->sns_cmd == NULL) { /* error */ qla_printk(KERN_WARNING, ha, "Memory Allocation failed - sns_cmd\n"); qla2x00_mem_free(ha); msleep(100); continue; } memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt)); } else { /* Get consistent memory allocated for MS IOCB */ ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &ha->ms_iocb_dma); if (ha->ms_iocb == NULL) { /* error */ qla_printk(KERN_WARNING, ha, "Memory Allocation failed - ms_iocb\n"); qla2x00_mem_free(ha); msleep(100); continue; } memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t)); /* * Get consistent memory allocated for CT SNS * commands */ ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL); if (ha->ct_sns == NULL) { /* error */ qla_printk(KERN_WARNING, ha, "Memory Allocation failed - ct_sns\n"); qla2x00_mem_free(ha); msleep(100); continue; } memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt)); } /* Done all allocations without any error. */ status = 0; } while (retry-- && status != 0); if (status) { printk(KERN_WARNING "%s(): **** FAILED ****\n", __func__); } return(status); } /* * qla2x00_mem_free * Frees all adapter allocated memory. * * Input: * ha = adapter block pointer. */ static void qla2x00_mem_free(scsi_qla_host_t *ha) { struct list_head *fcpl, *fcptemp; fc_port_t *fcport; unsigned long wtime;/* max wait time if mbx cmd is busy. */ if (ha == NULL) { /* error */ DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__)); return; } /* Make sure all other threads are stopped. */ wtime = 60 * HZ; while (ha->dpc_wait && wtime) { set_current_state(TASK_INTERRUPTIBLE); wtime = schedule_timeout(wtime); } /* free ioctl memory */ qla2x00_free_ioctl_mem(ha); /* free sp pool */ qla2x00_free_sp_pool(ha); if (ha->sns_cmd) dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), ha->sns_cmd, ha->sns_cmd_dma); if (ha->ct_sns) dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), ha->ct_sns, ha->ct_sns_dma); if (ha->ms_iocb) dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); if (ha->iodesc_pd) dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma); if (ha->init_cb) dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma); if (ha->s_dma_pool) dma_pool_destroy(ha->s_dma_pool); if (ha->rlc_rsp) dma_free_coherent(&ha->pdev->dev, sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp, ha->rlc_rsp_dma); if (ha->gid_list) dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, ha->gid_list_dma); if (ha->response_ring) dma_free_coherent(&ha->pdev->dev, (ha->response_q_length + 1) * sizeof(response_t), ha->response_ring, ha->response_dma); if (ha->request_ring) dma_free_coherent(&ha->pdev->dev, (ha->request_q_length + 1) * sizeof(request_t), ha->request_ring, ha->request_dma); ha->sns_cmd = NULL; ha->sns_cmd_dma = 0; ha->ct_sns = NULL; ha->ct_sns_dma = 0; ha->ms_iocb = NULL; ha->ms_iocb_dma = 0; ha->iodesc_pd = NULL; ha->iodesc_pd_dma = 0; ha->init_cb = NULL; ha->init_cb_dma = 0; ha->s_dma_pool = NULL; ha->rlc_rsp = NULL; ha->rlc_rsp_dma = 0; ha->gid_list = NULL; ha->gid_list_dma = 0; ha->response_ring = NULL; ha->response_dma = 0; ha->request_ring = NULL; ha->request_dma = 0; list_for_each_safe(fcpl, fcptemp, &ha->fcports) { fcport = list_entry(fcpl, fc_port_t, list); /* fc ports */ list_del_init(&fcport->list); kfree(fcport); } INIT_LIST_HEAD(&ha->fcports); if (ha->fw_dump) free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order); if (ha->fw_dump_buffer) vfree(ha->fw_dump_buffer); ha->fw_dump = NULL; ha->fw_dump_reading = 0; ha->fw_dump_buffer = NULL; } /* * qla2x00_allocate_sp_pool * This routine is called during initialization to allocate * memory for local srb_t. * * Input: * ha = adapter block pointer. * * Context: * Kernel context. * * Note: Sets the ref_count for non Null sp to one. */ static int qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) { int rval; rval = QLA_SUCCESS; ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab, mempool_free_slab, srb_cachep); if (ha->srb_mempool == NULL) { qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n"); rval = QLA_FUNCTION_FAILED; } return (rval); } /* * This routine frees all adapter allocated memory. * */ static void qla2x00_free_sp_pool( scsi_qla_host_t *ha) { if (ha->srb_mempool) { mempool_destroy(ha->srb_mempool); ha->srb_mempool = NULL; } } /************************************************************************** * qla2x00_do_dpc * This kernel thread is a task that is schedule by the interrupt handler * to perform the background processing for interrupts. * * Notes: * This task always run in the context of a kernel thread. It * is kick-off by the driver's detect code and starts up * up one per adapter. It immediately goes to sleep and waits for * some fibre event. When either the interrupt handler or * the timer routine detects a event it will one of the task * bits then wake us up. **************************************************************************/ static int qla2x00_do_dpc(void *data) { DECLARE_MUTEX_LOCKED(sem); scsi_qla_host_t *ha; fc_port_t *fcport; uint8_t status; uint16_t next_loopid; ha = (scsi_qla_host_t *)data; lock_kernel(); daemonize("%s_dpc", ha->host_str); allow_signal(SIGHUP); ha->dpc_wait = &sem; set_user_nice(current, -20); unlock_kernel(); complete(&ha->dpc_inited); while (1) { DEBUG3(printk("qla2x00: DPC handler sleeping\n")); if (down_interruptible(&sem)) break; if (ha->dpc_should_die) break; DEBUG3(printk("qla2x00: DPC handler waking up\n")); /* Initialization not yet finished. Don't do anything yet. */ if (!ha->flags.init_done || ha->dpc_active) continue; DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no)); ha->dpc_active = 1; if (ha->flags.mbox_busy) { ha->dpc_active = 0; continue; } if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) { DEBUG(printk("scsi(%ld): dpc: sched " "qla2x00_abort_isp ha = %p\n", ha->host_no, ha)); if (!(test_and_set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) { if (qla2x00_abort_isp(ha)) { /* failed. retry later */ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); } clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); } DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n", ha->host_no)); } if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) && (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) { DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n", ha->host_no)); qla2x00_rst_aen(ha); clear_bit(RESET_ACTIVE, &ha->dpc_flags); } /* Retry each device up to login retry count */ if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) && atomic_read(&ha->loop_state) != LOOP_DOWN) { DEBUG(printk("scsi(%ld): qla2x00_port_login()\n", ha->host_no)); next_loopid = 0; list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; /* * If the port is not ONLINE then try to login * to it if we haven't run out of retries. */ if (atomic_read(&fcport->state) != FCS_ONLINE && fcport->login_retry) { fcport->login_retry--; if (fcport->flags & FCF_FABRIC_DEVICE) { if (fcport->flags & FCF_TAPE_PRESENT) qla2x00_fabric_logout( ha, fcport->loop_id); status = qla2x00_fabric_login( ha, fcport, &next_loopid); } else status = qla2x00_local_device_login( ha, fcport->loop_id); if (status == QLA_SUCCESS) { fcport->old_loop_id = fcport->loop_id; DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n", ha->host_no, fcport->loop_id)); fcport->port_login_retry_count = ha->port_down_retry_count * PORT_RETRY_TIME; atomic_set(&fcport->state, FCS_ONLINE); atomic_set(&fcport->port_down_timer, ha->port_down_retry_count * PORT_RETRY_TIME); fcport->login_retry = 0; } else if (status == 1) { set_bit(RELOGIN_NEEDED, &ha->dpc_flags); /* retry the login again */ DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n", ha->host_no, fcport->login_retry, fcport->loop_id)); } else { fcport->login_retry = 0; } } if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) break; } DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n", ha->host_no)); } if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) && atomic_read(&ha->loop_state) != LOOP_DOWN) { clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags); DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n", ha->host_no)); set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n", ha->host_no)); } if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) { DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n", ha->host_no)); if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags))) { qla2x00_loop_resync(ha); clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags); } DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n", ha->host_no)); } if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) { DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n", ha->host_no)); qla2x00_rescan_fcports(ha); DEBUG(printk("scsi(%ld): Rescan flagged fcports..." "end.\n", ha->host_no)); } if (!ha->interrupts_on) qla2x00_enable_intrs(ha); ha->dpc_active = 0; } /* End of while(1) */ DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no)); /* * Make sure that nobody tries to wake us up again. */ ha->dpc_wait = NULL; ha->dpc_active = 0; complete_and_exit(&ha->dpc_exited, 0); } /* * qla2x00_rst_aen * Processes asynchronous reset. * * Input: * ha = adapter block pointer. */ static void qla2x00_rst_aen(scsi_qla_host_t *ha) { if (ha->flags.online && !ha->flags.reset_active && !atomic_read(&ha->loop_down_timer) && !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) { do { clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); /* * Issue marker command only when we are going to start * the I/O. */ ha->marker_needed = 1; } while (!atomic_read(&ha->loop_down_timer) && (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags))); } } /* * This routine will allocate SP from the free queue * input: * scsi_qla_host_t * * output: * srb_t * or NULL */ static srb_t * qla2x00_get_new_sp(scsi_qla_host_t *ha) { srb_t *sp; sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC); if (sp) atomic_set(&sp->ref_count, 1); return (sp); } static void qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp) { struct scsi_cmnd *cmd = sp->cmd; if (sp->flags & SRB_DMA_VALID) { if (cmd->use_sg) { dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer, cmd->use_sg, cmd->sc_data_direction); } else if (cmd->request_bufflen) { dma_unmap_single(&ha->pdev->dev, sp->dma_handle, cmd->request_bufflen, cmd->sc_data_direction); } sp->flags &= ~SRB_DMA_VALID; } } void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp) { struct scsi_cmnd *cmd = sp->cmd; qla2x00_sp_free_dma(ha, sp); CMD_SP(cmd) = NULL; mempool_free(sp, ha->srb_mempool); cmd->scsi_done(cmd); } /************************************************************************** * qla2x00_timer * * Description: * One second timer * * Context: Interrupt ***************************************************************************/ static void qla2x00_timer(scsi_qla_host_t *ha) { unsigned long cpu_flags = 0; fc_port_t *fcport; int start_dpc = 0; int index; srb_t *sp; int t; /* * Ports - Port down timer. * * Whenever, a port is in the LOST state we start decrementing its port * down timer every second until it reaches zero. Once it reaches zero * the port it marked DEAD. */ t = 0; list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) { if (atomic_read(&fcport->port_down_timer) == 0) continue; if (atomic_dec_and_test(&fcport->port_down_timer) != 0) atomic_set(&fcport->state, FCS_DEVICE_DEAD); DEBUG(printk("scsi(%ld): fcport-%d - port retry count: " "%d remainning\n", ha->host_no, t, atomic_read(&fcport->port_down_timer))); } t++; } /* End of for fcport */ /* Loop down handler. */ if (atomic_read(&ha->loop_down_timer) > 0 && !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) { if (atomic_read(&ha->loop_down_timer) == ha->loop_down_abort_time) { DEBUG(printk("scsi(%ld): Loop Down - aborting the " "queues before time expire\n", ha->host_no)); if (!IS_QLA2100(ha) && ha->link_down_timeout) atomic_set(&ha->loop_state, LOOP_DEAD); /* Schedule an ISP abort to return any tape commands. */ spin_lock_irqsave(&ha->hardware_lock, cpu_flags); for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { fc_port_t *sfcp; sp = ha->outstanding_cmds[index]; if (!sp) continue; sfcp = sp->fcport; if (!(sfcp->flags & FCF_TAPE_PRESENT)) continue; set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags); set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags); start_dpc++; } /* if the loop has been down for 4 minutes, reinit adapter */ if (atomic_dec_and_test(&ha->loop_down_timer) != 0) { DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - " "restarting queues.\n", ha->host_no)); set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags); start_dpc++; if (!(ha->device_flags & DFLG_NO_CABLE)) { DEBUG(printk("scsi(%ld): Loop down - " "aborting ISP.\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "Loop down - aborting ISP.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); } } DEBUG3(printk("scsi(%ld): Loop Down - seconds remainning %d\n", ha->host_no, atomic_read(&ha->loop_down_timer))); } /* Schedule the DPC routine if needed */ if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || start_dpc || test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) || test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) || test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && ha->dpc_wait && !ha->dpc_active) { up(ha->dpc_wait); } qla2x00_restart_timer(ha, WATCH_INTERVAL); } /* XXX(hch): crude hack to emulate a down_timeout() */ int qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) { const unsigned int step = HZ/10; do { if (!down_trylock(sema)) return 0; set_current_state(TASK_INTERRUPTIBLE); if (schedule_timeout(step)) break; } while ((timeout -= step) > 0); return -ETIMEDOUT; } /** * qla2x00_module_init - Module initialization. **/ static int __init qla2x00_module_init(void) { /* Allocate cache for SRBs. */ srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0, SLAB_HWCACHE_ALIGN, NULL, NULL); if (srb_cachep == NULL) { printk(KERN_ERR "qla2xxx: Unable to allocate SRB cache...Failing load!\n"); return -ENOMEM; } /* Derive version string. */ strcpy(qla2x00_version_str, QLA2XXX_VERSION); #if DEBUG_QLA2100 strcat(qla2x00_version_str, "-debug"); #endif qla2xxx_transport_template = fc_attach_transport(&qla2xxx_transport_functions); if (!qla2xxx_transport_template) return -ENODEV; printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); return 0; } /** * qla2x00_module_exit - Module cleanup. **/ static void __exit qla2x00_module_exit(void) { kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); } module_init(qla2x00_module_init); module_exit(qla2x00_module_exit); MODULE_AUTHOR("QLogic Corporation"); MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(QLA2XXX_VERSION);