/* drivers/video/s1d13xxxfb.c * * (c) 2004 Simtec Electronics * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org> * * Driver for Epson S1D13xxx series framebuffer chips * * Adapted from * linux/drivers/video/skeletonfb.c * linux/drivers/video/epson1355fb.c * linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson) * * Note, currently only tested on S1D13806 with 16bit CRT. * As such, this driver might still contain some hardcoded bits relating to * S1D13806. * Making it work on other S1D13XXX chips should merely be a matter of adding * a few switch()s, some missing glue here and there maybe, and split header * files. * * TODO: - handle dual screen display (CRT and LCD at the same time). * - check_var(), mode change, etc. * - PM untested. * - Accelerated interfaces. * - Probably not SMP safe :) * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. */ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/mm.h> #include <linux/mman.h> #include <linux/fb.h> #include <asm/io.h> #include <video/s1d13xxxfb.h> #define PFX "s1d13xxxfb: " #if 0 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0) #else #define dbg(fmt, args...) do { } while (0) #endif static const int __devinitconst s1d13xxxfb_revisions[] = { S1D13506_CHIP_REV, /* Rev.4 on HP Jornada 7xx S1D13506 */ S1D13806_CHIP_REV, /* Rev.7 on .. */ }; /* * Here we define the default struct fb_fix_screeninfo */ static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = { .id = S1D_FBID, .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .xpanstep = 0, .ypanstep = 1, .ywrapstep = 0, .accel = FB_ACCEL_NONE, }; static inline u8 s1d13xxxfb_readreg(struct s1d13xxxfb_par *par, u16 regno) { #if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) regno=((regno & 1) ? (regno & ~1L) : (regno + 1)); #endif return readb(par->regs + regno); } static inline void s1d13xxxfb_writereg(struct s1d13xxxfb_par *par, u16 regno, u8 value) { #if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) regno=((regno & 1) ? (regno & ~1L) : (regno + 1)); #endif writeb(value, par->regs + regno); } static inline void s1d13xxxfb_runinit(struct s1d13xxxfb_par *par, const struct s1d13xxxfb_regval *initregs, const unsigned int size) { int i; for (i = 0; i < size; i++) { if ((initregs[i].addr == S1DREG_DELAYOFF) || (initregs[i].addr == S1DREG_DELAYON)) mdelay((int)initregs[i].value); else { s1d13xxxfb_writereg(par, initregs[i].addr, initregs[i].value); } } /* make sure the hardware can cope with us */ mdelay(1); } static inline void lcd_enable(struct s1d13xxxfb_par *par, int enable) { u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); if (enable) mode |= 0x01; else mode &= ~0x01; s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); } static inline void crt_enable(struct s1d13xxxfb_par *par, int enable) { u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); if (enable) mode |= 0x02; else mode &= ~0x02; s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); } /* framebuffer control routines */ static inline void s1d13xxxfb_setup_pseudocolour(struct fb_info *info) { info->fix.visual = FB_VISUAL_PSEUDOCOLOR; info->var.red.length = 4; info->var.green.length = 4; info->var.blue.length = 4; } static inline void s1d13xxxfb_setup_truecolour(struct fb_info *info) { info->fix.visual = FB_VISUAL_TRUECOLOR; info->var.bits_per_pixel = 16; info->var.red.length = 5; info->var.red.offset = 11; info->var.green.length = 6; info->var.green.offset = 5; info->var.blue.length = 5; info->var.blue.offset = 0; } /** * s1d13xxxfb_set_par - Alters the hardware state. * @info: frame buffer structure * * Using the fb_var_screeninfo in fb_info we set the depth of the * framebuffer. This function alters the par AND the * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in * fb_info since we are using that data. This means we depend on the * data in var inside fb_info to be supported by the hardware. * xxxfb_check_var is always called before xxxfb_set_par to ensure this. * * XXX TODO: write proper s1d13xxxfb_check_var(), without which that * function is quite useless. */ static int s1d13xxxfb_set_par(struct fb_info *info) { struct s1d13xxxfb_par *s1dfb = info->par; unsigned int val; dbg("s1d13xxxfb_set_par: bpp=%d\n", info->var.bits_per_pixel); if ((s1dfb->display & 0x01)) /* LCD */ val = s1d13xxxfb_readreg(s1dfb, S1DREG_LCD_DISP_MODE); /* read colour control */ else /* CRT */ val = s1d13xxxfb_readreg(s1dfb, S1DREG_CRT_DISP_MODE); /* read colour control */ val &= ~0x07; switch (info->var.bits_per_pixel) { case 4: dbg("pseudo colour 4\n"); s1d13xxxfb_setup_pseudocolour(info); val |= 2; break; case 8: dbg("pseudo colour 8\n"); s1d13xxxfb_setup_pseudocolour(info); val |= 3; break; case 16: dbg("true colour\n"); s1d13xxxfb_setup_truecolour(info); val |= 5; break; default: dbg("bpp not supported!\n"); return -EINVAL; } dbg("writing %02x to display mode register\n", val); if ((s1dfb->display & 0x01)) /* LCD */ s1d13xxxfb_writereg(s1dfb, S1DREG_LCD_DISP_MODE, val); else /* CRT */ s1d13xxxfb_writereg(s1dfb, S1DREG_CRT_DISP_MODE, val); info->fix.line_length = info->var.xres * info->var.bits_per_pixel; info->fix.line_length /= 8; dbg("setting line_length to %d\n", info->fix.line_length); dbg("done setup\n"); return 0; } /** * s1d13xxxfb_setcolreg - sets a color register. * @regno: Which register in the CLUT we are programming * @red: The red value which can be up to 16 bits wide * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported the alpha value which can be up to 16 bits wide. * @info: frame buffer info structure * * Returns negative errno on error, or zero on success. */ static int s1d13xxxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info) { struct s1d13xxxfb_par *s1dfb = info->par; unsigned int pseudo_val; if (regno >= S1D_PALETTE_SIZE) return -EINVAL; dbg("s1d13xxxfb_setcolreg: %d: rgb=%d,%d,%d, tr=%d\n", regno, red, green, blue, transp); if (info->var.grayscale) red = green = blue = (19595*red + 38470*green + 7471*blue) >> 16; switch (info->fix.visual) { case FB_VISUAL_TRUECOLOR: if (regno >= 16) return -EINVAL; /* deal with creating pseudo-palette entries */ pseudo_val = (red >> 11) << info->var.red.offset; pseudo_val |= (green >> 10) << info->var.green.offset; pseudo_val |= (blue >> 11) << info->var.blue.offset; dbg("s1d13xxxfb_setcolreg: pseudo %d, val %08x\n", regno, pseudo_val); #if defined(CONFIG_PLAT_MAPPI) ((u32 *)info->pseudo_palette)[regno] = cpu_to_le16(pseudo_val); #else ((u32 *)info->pseudo_palette)[regno] = pseudo_val; #endif break; case FB_VISUAL_PSEUDOCOLOR: s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_ADDR, regno); s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, red); s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, green); s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, blue); break; default: return -ENOSYS; } dbg("s1d13xxxfb_setcolreg: done\n"); return 0; } /** * s1d13xxxfb_blank - blanks the display. * @blank_mode: the blank mode we want. * @info: frame buffer structure that represents a single frame buffer * * Blank the screen if blank_mode != 0, else unblank. Return 0 if * blanking succeeded, != 0 if un-/blanking failed due to e.g. a * video mode which doesn't support it. Implements VESA suspend * and powerdown modes on hardware that supports disabling hsync/vsync: * blank_mode == 2: suspend vsync * blank_mode == 3: suspend hsync * blank_mode == 4: powerdown * * Returns negative errno on error, or zero on success. */ static int s1d13xxxfb_blank(int blank_mode, struct fb_info *info) { struct s1d13xxxfb_par *par = info->par; dbg("s1d13xxxfb_blank: blank=%d, info=%p\n", blank_mode, info); switch (blank_mode) { case FB_BLANK_UNBLANK: case FB_BLANK_NORMAL: if ((par->display & 0x01) != 0) lcd_enable(par, 1); if ((par->display & 0x02) != 0) crt_enable(par, 1); break; case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: break; case FB_BLANK_POWERDOWN: lcd_enable(par, 0); crt_enable(par, 0); break; default: return -EINVAL; } /* let fbcon do a soft blank for us */ return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0); } /** * s1d13xxxfb_pan_display - Pans the display. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the * `yoffset' field of the `var' structure (`xoffset' not yet supported). * If the values don't fit, return -EINVAL. * * Returns negative errno on error, or zero on success. */ static int s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { struct s1d13xxxfb_par *par = info->par; u32 start; if (var->xoffset != 0) /* not yet ... */ return -EINVAL; if (var->yoffset + info->var.yres > info->var.yres_virtual) return -EINVAL; start = (info->fix.line_length >> 1) * var->yoffset; if ((par->display & 0x01)) { /* LCD */ s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START0, (start & 0xff)); s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START1, ((start >> 8) & 0xff)); s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START2, ((start >> 16) & 0x0f)); } else { /* CRT */ s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START0, (start & 0xff)); s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START1, ((start >> 8) & 0xff)); s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START2, ((start >> 16) & 0x0f)); } return 0; } /* framebuffer information structures */ static struct fb_ops s1d13xxxfb_fbops = { .owner = THIS_MODULE, .fb_set_par = s1d13xxxfb_set_par, .fb_setcolreg = s1d13xxxfb_setcolreg, .fb_blank = s1d13xxxfb_blank, .fb_pan_display = s1d13xxxfb_pan_display, /* to be replaced by any acceleration we can */ .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; static int s1d13xxxfb_width_tab[2][4] __devinitdata = { {4, 8, 16, -1}, {9, 12, 18, -1}, }; /** * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to * hardware setup. * @info: frame buffer structure * * We setup the framebuffer structures according to the current * hardware setup. On some machines, the BIOS will have filled * the chip registers with such info, on others, these values will * have been written in some init procedure. In any case, the * software values needs to match the hardware ones. This is what * this function ensures. * * Note: some of the hardcoded values here might need some love to * work on various chips, and might need to no longer be hardcoded. */ static void __devinit s1d13xxxfb_fetch_hw_state(struct fb_info *info) { struct fb_var_screeninfo *var = &info->var; struct fb_fix_screeninfo *fix = &info->fix; struct s1d13xxxfb_par *par = info->par; u8 panel, display; u16 offset; u32 xres, yres; u32 xres_virtual, yres_virtual; int bpp, lcd_bpp; int is_color, is_dual, is_tft; int lcd_enabled, crt_enabled; fix->type = FB_TYPE_PACKED_PIXELS; /* general info */ par->display = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); crt_enabled = (par->display & 0x02) != 0; lcd_enabled = (par->display & 0x01) != 0; if (lcd_enabled && crt_enabled) printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n"); if (lcd_enabled) display = s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_MODE); else /* CRT */ display = s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_MODE); bpp = display & 0x07; switch (bpp) { case 2: /* 4 bpp */ case 3: /* 8 bpp */ var->bits_per_pixel = 8; var->red.offset = var->green.offset = var->blue.offset = 0; var->red.length = var->green.length = var->blue.length = 8; break; case 5: /* 16 bpp */ s1d13xxxfb_setup_truecolour(info); break; default: dbg("bpp: %i\n", bpp); } fb_alloc_cmap(&info->cmap, 256, 0); /* LCD info */ panel = s1d13xxxfb_readreg(par, S1DREG_PANEL_TYPE); is_color = (panel & 0x04) != 0; is_dual = (panel & 0x02) != 0; is_tft = (panel & 0x01) != 0; lcd_bpp = s1d13xxxfb_width_tab[is_tft][(panel >> 4) & 3]; if (lcd_enabled) { xres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_HWIDTH) + 1) * 8; yres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT0) + ((s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT1) & 0x03) << 8) + 1); offset = (s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF0) + ((s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF1) & 0x7) << 8)); } else { /* crt */ xres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_HWIDTH) + 1) * 8; yres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT0) + ((s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT1) & 0x03) << 8) + 1); offset = (s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF0) + ((s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF1) & 0x7) << 8)); } xres_virtual = offset * 16 / var->bits_per_pixel; yres_virtual = fix->smem_len / (offset * 2); var->xres = xres; var->yres = yres; var->xres_virtual = xres_virtual; var->yres_virtual = yres_virtual; var->xoffset = var->yoffset = 0; fix->line_length = offset * 2; var->grayscale = !is_color; var->activate = FB_ACTIVATE_NOW; dbg(PFX "bpp=%d, lcd_bpp=%d, " "crt_enabled=%d, lcd_enabled=%d\n", var->bits_per_pixel, lcd_bpp, crt_enabled, lcd_enabled); dbg(PFX "xres=%d, yres=%d, vxres=%d, vyres=%d " "is_color=%d, is_dual=%d, is_tft=%d\n", xres, yres, xres_virtual, yres_virtual, is_color, is_dual, is_tft); } static int s1d13xxxfb_remove(struct platform_device *pdev) { struct fb_info *info = platform_get_drvdata(pdev); struct s1d13xxxfb_par *par = NULL; if (info) { par = info->par; if (par && par->regs) { /* disable output & enable powersave */ s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, 0x00); s1d13xxxfb_writereg(par, S1DREG_PS_CNF, 0x11); iounmap(par->regs); } fb_dealloc_cmap(&info->cmap); if (info->screen_base) iounmap(info->screen_base); framebuffer_release(info); } release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start +1); release_mem_region(pdev->resource[1].start, pdev->resource[1].end - pdev->resource[1].start +1); return 0; } static int __devinit s1d13xxxfb_probe(struct platform_device *pdev) { struct s1d13xxxfb_par *default_par; struct fb_info *info; struct s1d13xxxfb_pdata *pdata = NULL; int ret = 0; int i; u8 revision; dbg("probe called: device is %p\n", pdev); printk(KERN_INFO "Epson S1D13XXX FB Driver\n"); /* enable platform-dependent hardware glue, if any */ if (pdev->dev.platform_data) pdata = pdev->dev.platform_data; if (pdata && pdata->platform_init_video) pdata->platform_init_video(); if (pdev->num_resources != 2) { dev_err(&pdev->dev, "invalid num_resources: %i\n", pdev->num_resources); ret = -ENODEV; goto bail; } /* resource[0] is VRAM, resource[1] is registers */ if (pdev->resource[0].flags != IORESOURCE_MEM || pdev->resource[1].flags != IORESOURCE_MEM) { dev_err(&pdev->dev, "invalid resource type\n"); ret = -ENODEV; goto bail; } if (!request_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start +1, "s1d13xxxfb mem")) { dev_dbg(&pdev->dev, "request_mem_region failed\n"); ret = -EBUSY; goto bail; } if (!request_mem_region(pdev->resource[1].start, pdev->resource[1].end - pdev->resource[1].start +1, "s1d13xxxfb regs")) { dev_dbg(&pdev->dev, "request_mem_region failed\n"); ret = -EBUSY; goto bail; } info = framebuffer_alloc(sizeof(struct s1d13xxxfb_par) + sizeof(u32) * 256, &pdev->dev); if (!info) { ret = -ENOMEM; goto bail; } platform_set_drvdata(pdev, info); default_par = info->par; default_par->regs = ioremap_nocache(pdev->resource[1].start, pdev->resource[1].end - pdev->resource[1].start +1); if (!default_par->regs) { printk(KERN_ERR PFX "unable to map registers\n"); ret = -ENOMEM; goto bail; } info->pseudo_palette = default_par->pseudo_palette; info->screen_base = ioremap_nocache(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start +1); if (!info->screen_base) { printk(KERN_ERR PFX "unable to map framebuffer\n"); ret = -ENOMEM; goto bail; } revision = s1d13xxxfb_readreg(default_par, S1DREG_REV_CODE) >> 2; ret = -ENODEV; for (i = 0; i < ARRAY_SIZE(s1d13xxxfb_revisions); i++) { if (revision == s1d13xxxfb_revisions[i]) ret = 0; } if (!ret) printk(KERN_INFO PFX "chip revision %i\n", revision); else { printk(KERN_INFO PFX "unknown chip revision %i\n", revision); goto bail; } info->fix = s1d13xxxfb_fix; info->fix.mmio_start = pdev->resource[1].start; info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1; info->fix.smem_start = pdev->resource[0].start; info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1; printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n", default_par->regs, info->fix.smem_len / 1024, info->screen_base); info->par = default_par; info->fbops = &s1d13xxxfb_fbops; info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; /* perform "manual" chip initialization, if needed */ if (pdata && pdata->initregs) s1d13xxxfb_runinit(info->par, pdata->initregs, pdata->initregssize); s1d13xxxfb_fetch_hw_state(info); if (register_framebuffer(info) < 0) { ret = -EINVAL; goto bail; } printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); return 0; bail: s1d13xxxfb_remove(pdev); return ret; } #ifdef CONFIG_PM static int s1d13xxxfb_suspend(struct platform_device *dev, pm_message_t state) { struct fb_info *info = platform_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; struct s1d13xxxfb_pdata *pdata = NULL; /* disable display */ lcd_enable(s1dfb, 0); crt_enable(s1dfb, 0); if (dev->dev.platform_data) pdata = dev->dev.platform_data; #if 0 if (!s1dfb->disp_save) s1dfb->disp_save = kmalloc(info->fix.smem_len, GFP_KERNEL); if (!s1dfb->disp_save) { printk(KERN_ERR PFX "no memory to save screen"); return -ENOMEM; } memcpy_fromio(s1dfb->disp_save, info->screen_base, info->fix.smem_len); #else s1dfb->disp_save = NULL; #endif if (!s1dfb->regs_save) s1dfb->regs_save = kmalloc(info->fix.mmio_len, GFP_KERNEL); if (!s1dfb->regs_save) { printk(KERN_ERR PFX "no memory to save registers"); return -ENOMEM; } /* backup all registers */ memcpy_fromio(s1dfb->regs_save, s1dfb->regs, info->fix.mmio_len); /* now activate power save mode */ s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x11); if (pdata && pdata->platform_suspend_video) return pdata->platform_suspend_video(); else return 0; } static int s1d13xxxfb_resume(struct platform_device *dev) { struct fb_info *info = platform_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; struct s1d13xxxfb_pdata *pdata = NULL; /* awaken the chip */ s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10); /* do not let go until SDRAM "wakes up" */ while ((s1d13xxxfb_readreg(s1dfb, S1DREG_PS_STATUS) & 0x01)) udelay(10); if (dev->dev.platform_data) pdata = dev->dev.platform_data; if (s1dfb->regs_save) { /* will write RO regs, *should* get away with it :) */ memcpy_toio(s1dfb->regs, s1dfb->regs_save, info->fix.mmio_len); kfree(s1dfb->regs_save); } if (s1dfb->disp_save) { memcpy_toio(info->screen_base, s1dfb->disp_save, info->fix.smem_len); kfree(s1dfb->disp_save); /* XXX kmalloc()'d when? */ } if ((s1dfb->display & 0x01) != 0) lcd_enable(s1dfb, 1); if ((s1dfb->display & 0x02) != 0) crt_enable(s1dfb, 1); if (pdata && pdata->platform_resume_video) return pdata->platform_resume_video(); else return 0; } #endif /* CONFIG_PM */ static struct platform_driver s1d13xxxfb_driver = { .probe = s1d13xxxfb_probe, .remove = s1d13xxxfb_remove, #ifdef CONFIG_PM .suspend = s1d13xxxfb_suspend, .resume = s1d13xxxfb_resume, #endif .driver = { .name = S1D_DEVICENAME, }, }; static int __init s1d13xxxfb_init(void) { #ifndef MODULE if (fb_get_options("s1d13xxxfb", NULL)) return -ENODEV; #endif return platform_driver_register(&s1d13xxxfb_driver); } static void __exit s1d13xxxfb_exit(void) { platform_driver_unregister(&s1d13xxxfb_driver); } module_init(s1d13xxxfb_init); module_exit(s1d13xxxfb_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Framebuffer driver for S1D13xxx devices"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Thibaut VARENE <varenet@parisc-linux.org>");