1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
In order to support ACPI open-ended hardware configurations (e.g. development
boards) we need a way to augment the ACPI configuration provided by the firmware
image. A common example is connecting sensors on I2C / SPI buses on development
boards.
Although this can be accomplished by creating a kernel platform driver or
recompiling the firmware image with updated ACPI tables, neither is practical:
the former proliferates board specific kernel code while the latter requires
access to firmware tools which are often not publicly available.
Because ACPI supports external references in AML code a more practical
way to augment firmware ACPI configuration is by dynamically loading
user defined SSDT tables that contain the board specific information.
For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the
Minnowboard MAX development board exposed via the LSE connector [1], the
following ASL code can be used:
DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003)
{
External (\_SB.I2C6, DeviceObj)
Scope (\_SB.I2C6)
{
Device (STAC)
{
Name (_ADR, Zero)
Name (_HID, "BMA222E")
Method (_CRS, 0, Serialized)
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C6", 0x00,
ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, , )
{ // Pin list
0
}
})
Return (RBUF)
}
}
}
}
which can then be compiled to AML binary format:
$ iasl minnowmax.asl
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20140214-64 [Mar 29 2014]
Copyright (c) 2000 - 2014 Intel Corporation
ASL Input: minnomax.asl - 30 lines, 614 bytes, 7 keywords
AML Output: minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes
[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29
The resulting AML code can then be loaded by the kernel using one of the methods
below.
== Loading ACPI SSDTs from initrd ==
This option allows loading of user defined SSDTs from initrd and it is useful
when the system does not support EFI or when there is not enough EFI storage.
It works in a similar way with initrd based ACPI tables override/upgrade: SSDT
aml code must be placed in the first, uncompressed, initrd under the
"kernel/firmware/acpi" path. Multiple files can be used and this will translate
in loading multiple tables. Only SSDT and OEM tables are allowed. See
initrd_table_override.txt for more details.
Here is an example:
# Add the raw ACPI tables to an uncompressed cpio archive.
# They must be put into a /kernel/firmware/acpi directory inside the
# cpio archive.
# The uncompressed cpio archive must be the first.
# Other, typically compressed cpio archives, must be
# concatenated on top of the uncompressed one.
mkdir -p kernel/firmware/acpi
cp ssdt.aml kernel/firmware/acpi
# Create the uncompressed cpio archive and concatenate the original initrd
# on top:
find kernel | cpio -H newc --create > /boot/instrumented_initrd
cat /boot/initrd >>/boot/instrumented_initrd
|
