1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
* "qcom,hdmi-tx-8994"
* "qcom,hdmi-tx-8084"
* "qcom,hdmi-tx-8974"
* "qcom,hdmi-tx-8660"
* "qcom,hdmi-tx-8960"
- reg: Physical base address and length of the controller's registers
- reg-names: "core_physical"
- interrupts: The interrupt signal from the hdmi block.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
- qcom,hdmi-tx-hpd-gpio: hpd pin
- core-vdda-supply: phandle to supply regulator
- hdmi-mux-supply: phandle to mux regulator
Optional properties:
- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-1: the "sleep" pinctrl state
Example:
/ {
...
hdmi: qcom,hdmi-tx-8960@4a00000 {
compatible = "qcom,hdmi-tx-8960";
reg-names = "core_physical";
reg = <0x04a00000 0x1000>;
interrupts = <GIC_SPI 79 0>;
clock-names =
"core_clk",
"master_iface_clk",
"slave_iface_clk";
clocks =
<&mmcc HDMI_APP_CLK>,
<&mmcc HDMI_M_AHB_CLK>,
<&mmcc HDMI_S_AHB_CLK>;
qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
core-vdda-supply = <&pm8921_hdmi_mvs>;
hdmi-mux-supply = <&ext_3p3v>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hpd_active &ddc_active &cec_active>;
pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
};
};
|
