1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
* APM X-Gene SoC EDAC node
EDAC node is defined to describe on-chip error detection and correction.
The follow error types are supported:
memory controller - Memory controller
PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache
L3 - L3 cache controller
SoC - SoC IP's such as Ethernet, SATA, and etc
The following section describes the EDAC DT node binding.
Required properties:
- compatible : Shall be "apm,xgene-edac".
- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
- regmap-efuse : Regmap of the PMD efuse resource.
- reg : First resource shall be the CPU bus (PCP) resource.
- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error
IRQ(s).
Required properties for memory controller subnode:
- compatible : Shall be "apm,xgene-edac-mc".
- reg : First resource shall be the memory controller unit
(MCU) resource.
- memory-controller : Instance number of the memory controller.
Required properties for PMD subnode:
- compatible : Shall be "apm,xgene-edac-pmd" or
"apm,xgene-edac-pmd-v2".
- reg : First resource shall be the PMD resource.
- pmd-controller : Instance number of the PMD controller.
Required properties for L3 subnode:
- compatible : Shall be "apm,xgene-edac-l3" or
"apm,xgene-edac-l3-v2".
- reg : First resource shall be the L3 EDAC resource.
Required properties for SoC subnode:
- compatible : Shall be "apm,xgene-edac-soc-v1" for revision 1 or
"apm,xgene-edac-l3-soc" for general value reporting
only.
- reg : First resource shall be the SoC EDAC resource.
Example:
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
};
mcba: mcba@7e700000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e700000 0x0 0x1000>;
};
mcbb: mcbb@7e720000 {
compatible = "apm,xgene-mcb", "syscon";
reg = <0x0 0x7e720000 0x0 0x1000>;
};
efuse: efuse@1054a000 {
compatible = "apm,xgene-efuse", "syscon";
reg = <0x0 0x1054a000 0x0 0x20>;
};
edac@78800000 {
compatible = "apm,xgene-edac";
#address-cells = <2>;
#size-cells = <2>;
ranges;
regmap-csw = <&csw>;
regmap-mcba = <&mcba>;
regmap-mcbb = <&mcbb>;
regmap-efuse = <&efuse>;
reg = <0x0 0x78800000 0x0 0x100>;
interrupts = <0x0 0x20 0x4>,
<0x0 0x21 0x4>,
<0x0 0x27 0x4>;
edacmc@7e800000 {
compatible = "apm,xgene-edac-mc";
reg = <0x0 0x7e800000 0x0 0x1000>;
memory-controller = <0>;
};
edacpmd@7c000000 {
compatible = "apm,xgene-edac-pmd";
reg = <0x0 0x7c000000 0x0 0x200000>;
pmd-controller = <0>;
};
edacl3@7e600000 {
compatible = "apm,xgene-edac-l3";
reg = <0x0 0x7e600000 0x0 0x1000>;
};
edacsoc@7e930000 {
compatible = "apm,xgene-edac-soc-v1";
reg = <0x0 0x7e930000 0x0 0x1000>;
};
};
|
