1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
|
* Toshiba TC3589x multi-purpose expander
The Toshiba TC3589x series are I2C-based MFD devices which may expose the
following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
e.g. LEDs or vibrators) The included models are:
- TC35890
- TC35892
- TC35893
- TC35894
- TC35895
- TC35896
Required properties:
- compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
"toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
- reg : I2C address of the device
- interrupt-parent : specifies which IRQ controller we're connected to
- interrupts : the interrupt on the parent the controller is connected to
- interrupt-controller : marks the device node as an interrupt controller
- #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
TC3589x interrupt controller.
Optional nodes:
- GPIO
This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
(other models) GPIO lines.
- compatible : must be "toshiba,tc3589x-gpio"
- interrupts : interrupt on the parent, which must be the tc3589x MFD device
- interrupt-controller : marks the device node as an interrupt controller
- #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
TC3589x GPIO interrupt controller, the second cell is the interrupt flags
in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
flags are valid:
- IRQ_TYPE_LEVEL_LOW
- IRQ_TYPE_LEVEL_HIGH
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
- IRQ_TYPE_EDGE_BOTH
- gpio-controller : marks the device node as a GPIO controller
- #gpio-cells : should be <2>, the first cell is the GPIO offset on this
GPIO controller, the second cell is the flags.
- Keypad
This keypad is the same on all variants, supporting up to 96 different
keys. The linux-specific properties are modeled on those already existing
in other input drivers.
- compatible : must be "toshiba,tc3589x-keypad"
- debounce-delay-ms : debounce interval in milliseconds
- keypad,num-rows : number of rows in the matrix, see
bindings/input/matrix-keymap.txt
- keypad,num-columns : number of columns in the matrix, see
bindings/input/matrix-keymap.txt
- linux,keymap: the definition can be found in
bindings/input/matrix-keymap.txt
- linux,no-autorepeat: do no enable autorepeat feature.
- wakeup-source: use any event on keypad as wakeup event.
(Legacy property supported: "linux,wakeup")
Example:
tc35893@44 {
compatible = "toshiba,tc35893";
reg = <0x44>;
interrupt-parent = <&gpio6>;
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <1>;
tc3589x_gpio {
compatible = "toshiba,tc3589x-gpio";
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
tc3589x_keypad {
compatible = "toshiba,tc3589x-keypad";
interrupts = <6>;
debounce-delay-ms = <4>;
keypad,num-columns = <8>;
keypad,num-rows = <8>;
linux,no-autorepeat;
linux,keymap = <0x0301006b
0x04010066
0x06040072
0x040200d7
0x0303006a
0x0205000e
0x0607008b
0x0500001c
0x0403000b
0x03040034
0x05020067
0x0305006c
0x040500e7
0x0005009e
0x06020073
0x01030039
0x07060069
0x050500d9>;
wakeup-source;
};
};
|
