1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MTK MSDC Storage Host Controller
maintainers:
- Chaotian Jing <chaotian.jing@mediatek.com>
- Wenbin Mei <wenbin.mei@mediatek.com>
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-mmc
- mediatek,mt2712-mmc
- mediatek,mt6779-mmc
- mediatek,mt6795-mmc
- mediatek,mt7620-mmc
- mediatek,mt7622-mmc
- mediatek,mt7986-mmc
- mediatek,mt8135-mmc
- mediatek,mt8173-mmc
- mediatek,mt8183-mmc
- mediatek,mt8516-mmc
- items:
- const: mediatek,mt7623-mmc
- const: mediatek,mt2701-mmc
- items:
- enum:
- mediatek,mt8186-mmc
- mediatek,mt8188-mmc
- mediatek,mt8192-mmc
- mediatek,mt8195-mmc
- mediatek,mt8365-mmc
- const: mediatek,mt8183-mmc
reg:
minItems: 1
items:
- description: base register (required).
- description: top base register (required for MT8183).
clocks:
description:
Should contain phandle for the clock feeding the MMC controller.
minItems: 2
maxItems: 7
clock-names:
minItems: 2
maxItems: 7
interrupts:
description:
Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
interrupt is required and be configured as wakeup source irq.
minItems: 1
maxItems: 2
interrupt-names:
items:
- const: msdc
- const: sdio_wakeup
pinctrl-names:
description:
Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
scenario.
minItems: 2
items:
- const: default
- const: state_uhs
- const: state_eint
pinctrl-0:
description:
should contain default/high speed pin ctrl.
maxItems: 1
pinctrl-1:
description:
should contain uhs mode pin ctrl.
maxItems: 1
pinctrl-2:
description:
should switch dat1 pin to GPIO mode.
maxItems: 1
assigned-clocks:
description:
PLL of the source clock.
maxItems: 1
assigned-clock-parents:
description:
parent of source clock, used for HS400 mode to get 400Mhz source clock.
maxItems: 1
hs400-ds-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS400 DS delay setting.
minimum: 0
maximum: 0xffffffff
mediatek,hs200-cmd-int-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS200 command internal delay setting.
This field has total 32 stages.
The value is an integer from 0 to 31.
minimum: 0
maximum: 31
mediatek,hs400-cmd-int-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS400 command internal delay setting.
This field has total 32 stages.
The value is an integer from 0 to 31.
minimum: 0
maximum: 31
mediatek,hs400-cmd-resp-sel-rising:
$ref: /schemas/types.yaml#/definitions/flag
description:
HS400 command response sample selection.
If present, HS400 command responses are sampled on rising edges.
If not present, HS400 command responses are sampled on falling edges.
mediatek,hs400-ds-dly3:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Gear of the third delay line for DS for input data latch in data
pad macro, there are 32 stages from 0 to 31.
For different corner IC, the time is different about one step, it is
about 100ps.
The value is confirmed by doing scan and calibration to find a best
value with corner IC and it is valid only for HS400 mode.
minimum: 0
maximum: 31
mediatek,latch-ck:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
if not present, default value is 0.
applied to compatible "mediatek,mt2701-mmc".
minimum: 0
maximum: 7
resets:
maxItems: 1
reset-names:
const: hrst
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- pinctrl-names
- pinctrl-0
- pinctrl-1
- vmmc-supply
- vqmmc-supply
allOf:
- $ref: mmc-controller.yaml#
- if:
properties:
compatible:
enum:
- mediatek,mt2701-mmc
- mediatek,mt6779-mmc
- mediatek,mt6795-mmc
- mediatek,mt7620-mmc
- mediatek,mt7622-mmc
- mediatek,mt7623-mmc
- mediatek,mt8135-mmc
- mediatek,mt8173-mmc
- mediatek,mt8183-mmc
- mediatek,mt8186-mmc
- mediatek,mt8188-mmc
- mediatek,mt8195-mmc
- mediatek,mt8516-mmc
then:
properties:
clocks:
minItems: 2
items:
- description: source clock
- description: HCLK which used for host
- description: independent source clock gate
clock-names:
minItems: 2
items:
- const: source
- const: hclk
- const: source_cg
- if:
properties:
compatible:
contains:
const: mediatek,mt2712-mmc
then:
properties:
clocks:
minItems: 3
items:
- description: source clock
- description: HCLK which used for host
- description: independent source clock gate
- description: bus clock used for internal register access (required for MSDC0/3).
clock-names:
minItems: 3
items:
- const: source
- const: hclk
- const: source_cg
- const: bus_clk
- if:
properties:
compatible:
contains:
const: mediatek,mt8183-mmc
then:
properties:
reg:
minItems: 2
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt7986-mmc
then:
properties:
clocks:
minItems: 3
items:
- description: source clock
- description: HCLK which used for host
- description: independent source clock gate
- description: bus clock used for internal register access (required for MSDC0/3).
- description: msdc subsys clock gate
clock-names:
minItems: 3
items:
- const: source
- const: hclk
- const: source_cg
- const: bus_clk
- const: sys_cg
- if:
properties:
compatible:
enum:
- mediatek,mt8186-mmc
- mediatek,mt8188-mmc
- mediatek,mt8195-mmc
then:
properties:
clocks:
items:
- description: source clock
- description: HCLK which used for host
- description: independent source clock gate
- description: crypto clock used for data encrypt/decrypt (optional)
clock-names:
items:
- const: source
- const: hclk
- const: source_cg
- const: crypto
- if:
properties:
compatible:
contains:
const: mediatek,mt8192-mmc
then:
properties:
clocks:
items:
- description: source clock
- description: HCLK which used for host
- description: independent source clock gate
- description: msdc subsys clock gate
- description: peripheral bus clock gate
- description: AXI bus clock gate
- description: AHB bus clock gate
clock-names:
items:
- const: source
- const: hclk
- const: source_cg
- const: sys_cg
- const: pclk_cg
- const: axi_cg
- const: ahb_cg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
mmc0: mmc@11230000 {
compatible = "mediatek,mt8173-mmc";
reg = <0x11230000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
<&topckgen CLK_TOP_MSDC50_0_H_SEL>;
clock-names = "source", "hclk";
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
hs400-ds-delay = <0x14015>;
mediatek,hs200-cmd-int-delay = <26>;
mediatek,hs400-cmd-int-delay = <14>;
mediatek,hs400-cmd-resp-sel-rising;
};
mmc3: mmc@11260000 {
compatible = "mediatek,mt8173-mmc";
reg = <0x11260000 0x1000>;
clock-names = "source", "hclk";
clocks = <&pericfg CLK_PERI_MSDC30_3>,
<&topckgen CLK_TOP_MSDC50_2_H_SEL>;
interrupt-names = "msdc", "sdio_wakeup";
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
<&pio 23 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "state_uhs", "state_eint";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_uhs>;
pinctrl-2 = <&mmc2_pins_eint>;
bus-width = <4>;
max-frequency = <200000000>;
cap-sd-highspeed;
sd-uhs-sdr104;
keep-power-in-suspend;
wakeup-source;
cap-sdio-irq;
no-mmc;
no-sd;
non-removable;
vmmc-supply = <&sdio_fixed_3v3>;
vqmmc-supply = <&mt6397_vgp3_reg>;
mmc-pwrseq = <&wifi_pwrseq>;
};
...
|
