1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: StarFive JH7110 PCIe host controller
maintainers:
- Kevin Xie <kevin.xie@starfivetech.com>
allOf:
- $ref: plda,xpressrich3-axi-common.yaml#
properties:
compatible:
const: starfive,jh7110-pcie
reg:
maxItems: 2
reg-names:
maxItems: 2
clocks:
items:
- description: NOC bus clock
- description: Transport layer clock
- description: AXI MST0 clock
- description: APB clock
clock-names:
items:
- const: noc
- const: tl
- const: axi_mst0
- const: apb
resets:
items:
- description: AXI MST0 reset
- description: AXI SLAVE0 reset
- description: AXI SLAVE reset
- description: PCIE BRIDGE reset
- description: PCIE CORE reset
- description: PCIE APB reset
reset-names:
items:
- const: mst0
- const: slv0
- const: slv
- const: brg
- const: core
- const: apb
starfive,stg-syscon:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
The phandle to System Register Controller syscon node.
perst-gpios:
description: GPIO controlled connection to PERST# signal
maxItems: 1
phys:
description:
Specified PHY is attached to PCIe controller.
maxItems: 1
required:
- clocks
- resets
- starfive,stg-syscon
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie@940000000 {
compatible = "starfive,jh7110-pcie";
reg = <0x9 0x40000000 0x0 0x10000000>,
<0x0 0x2b000000 0x0 0x1000000>;
reg-names = "cfg", "apb";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
<0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
starfive,stg-syscon = <&stg_syscon>;
bus-range = <0x0 0xff>;
interrupt-parent = <&plic>;
interrupts = <56>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
msi-controller;
clocks = <&syscrg 86>,
<&stgcrg 10>,
<&stgcrg 8>,
<&stgcrg 9>;
clock-names = "noc", "tl", "axi_mst0", "apb";
resets = <&stgcrg 11>,
<&stgcrg 12>,
<&stgcrg 13>,
<&stgcrg 14>,
<&stgcrg 15>,
<&stgcrg 16>;
perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
phys = <&pciephy0>;
pcie_intc0: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
};
};
};
|
