1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
Qualcomm WCNSS Peripheral Image Loader
This document defines the binding for a component that loads and boots firmware
on the Qualcomm WCNSS core.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,riva-pil",
"qcom,pronto-v1-pil",
"qcom,pronto-v2-pil"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: must specify the base address and size of the CCU, DXE and
PMU register blocks
- reg-names:
Usage: required
Value type: <stringlist>
Definition: must be "ccu", "dxe", "pmu"
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
Definition: must list the watchdog and fatal IRQs and may specify the
ready, handover and stop-ack IRQs
- interrupt-names:
Usage: required
Value type: <stringlist>
Definition: should be "wdog", "fatal", optionally followed by "ready",
"handover", "stop-ack"
- vddmx-supply:
- vddcx-supply:
- vddpx-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the WCNSS core
- qcom,smem-states:
Usage: optional
Value type: <prop-encoded-array>
Definition: reference to the SMEM state used to indicate to WCNSS that
it should shut down
- qcom,smem-state-names:
Usage: optional
Value type: <stringlist>
Definition: should be "stop"
- memory-region:
Usage: required
Value type: <prop-encoded-array>
Definition: reference to reserved-memory node for the remote processor
see ../reserved-memory/reserved-memory.txt
= SUBNODES
A single subnode of the WCNSS PIL describes the attached rf module and its
resource dependencies.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,wcn3620",
"qcom,wcn3660",
"qcom,wcn3680"
- clocks:
Usage: required
Value type: <prop-encoded-array>
Definition: should specify the xo clock and optionally the rf clock
- clock-names:
Usage: required
Value type: <stringlist>
Definition: should be "xo", optionally followed by "rf"
- vddxo-supply:
- vddrfa-supply:
- vddpa-supply:
- vdddig-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the WCNSS core
= EXAMPLE
The following example describes the resources needed to boot control the WCNSS,
with attached WCN3680, as it is commonly found on MSM8974 boards.
pronto@fb204000 {
compatible = "qcom,pronto-v2-pil";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
interrupts-extended = <&intc 0 149 1>,
<&wcnss_smp2p_slave 0 0>,
<&wcnss_smp2p_slave 1 0>,
<&wcnss_smp2p_slave 2 0>,
<&wcnss_smp2p_slave 3 0>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
vddmx-supply = <&pm8841_s1>;
vddcx-supply = <&pm8841_s2>;
vddpx-supply = <&pm8941_s3>;
qcom,smem-states = <&wcnss_smp2p_out 0>;
qcom,smem-state-names = "stop";
memory-region = <&wcnss_region>;
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
iris {
compatible = "qcom,wcn3680";
clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
clock-names = "xo", "rf";
vddxo-supply = <&pm8941_l6>;
vddrfa-supply = <&pm8941_l11>;
vddpa-supply = <&pm8941_l19>;
vdddig-supply = <&pm8941_s3>;
};
};
|
