1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
Allwinner SUN8I audio codec
------------------------------------
On Sun8i-A33 SoCs, the audio is separated in different parts:
- A DAI driver. It uses the "sun4i-i2s" driver which is
documented here:
Documentation/devicetree/bindings/sound/sun4i-i2s.txt
- An analog part of the codec which is handled as PRCM registers.
See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
- An digital part of the codec which is documented in this current
binding documentation.
- And finally, an audio card which links all the above components.
The simple-audio card will be used.
See Documentation/devicetree/bindings/sound/simple-card.txt
This bindings documentation exposes Sun8i codec (digital part).
Required properties:
- compatible: must be "allwinner,sun8i-a33-codec"
- reg: must contain the registers location and length
- interrupts: must contain the codec interrupt
- clocks: a list of phandle + clock-specifer pairs, one for each entry
in clock-names.
- clock-names: should contain followings:
- "bus": the parent APB clock for this controller
- "mod": the parent module clock
Here is an example to add a sound card and the codec binding on sun8i SoCs that
are similar to A33 using simple-card:
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&link_codec>;
simple-audio-card,bitclock-master = <&link_codec>;
simple-audio-card,mclk-fs = <512>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "Digital Left DAC",
"Right DAC", "Digital Right DAC";
simple-audio-card,cpu {
sound-dai = <&dai>;
};
link_codec: simple-audio-card,codec {
sound-dai = <&codec>;
};
soc@01c00000 {
[...]
audio-codec@1c22e00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
clock-names = "bus", "mod";
};
};
|
