1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
Binding for the Cadence USBSS-DRD controller
Required properties:
- reg: Physical base address and size of the controller's register areas.
Controller has 3 different regions:
- HOST registers area
- DEVICE registers area
- OTG/DRD registers area
- reg-names - register memory area names:
"xhci" - for HOST registers space
"dev" - for DEVICE registers space
"otg" - for OTG/DRD registers space
- compatible: Should contain: "cdns,usb3"
- interrupts: Interrupts used by cdns3 controller:
"host" - interrupt used by XHCI driver.
"peripheral" - interrupt used by device driver
"otg" - interrupt used by DRD/OTG part of driver
Optional properties:
- maximum-speed : valid arguments are "super-speed", "high-speed" and
"full-speed"; refer to usb/generic.txt
- dr_mode: Should be one of "host", "peripheral" or "otg".
- phys: reference to the USB PHY
- phy-names: from the *Generic PHY* bindings;
Supported names are:
- cdns3,usb2-phy
- cdns3,usb3-phy
- cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints
buffers expressed in KB
Example:
usb@f3000000 {
compatible = "cdns,usb3";
interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host", "peripheral", "otg";
reg = <0xf3000000 0x10000>, /* memory area for HOST registers */
<0xf3010000 0x10000>, /* memory area for DEVICE registers */
<0xf3020000 0x10000>; /* memory area for OTG/DRD registers */
reg-names = "xhci", "dev", "otg";
phys = <&usb2_phy>, <&usb3_phy>;
phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy";
};
|
