path: root/arch/arm/boot/dts/exynos5420.dtsi

/*
 * SAMSUNG EXYNOS5420 SoC device tree source
 *
 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
 * EXYNOS5420 based board files can include this file and provide
 * values for board specfic bindings.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <dt-bindings/clock/exynos5420.h>
#include "exynos5.dtsi"
#include "exynos5420-pinctrl.dtsi"

#include <dt-bindings/clock/exynos-audss-clk.h>

/ {
	compatible = "samsung,exynos5420", "samsung,exynos5";

	aliases {
		mshc0 = &mmc_0;
		mshc1 = &mmc_1;
		mshc2 = &mmc_2;
		pinctrl0 = &pinctrl_0;
		pinctrl1 = &pinctrl_1;
		pinctrl2 = &pinctrl_2;
		pinctrl3 = &pinctrl_3;
		pinctrl4 = &pinctrl_4;
		i2c0 = &i2c_0;
		i2c1 = &i2c_1;
		i2c2 = &i2c_2;
		i2c3 = &i2c_3;
		i2c4 = &hsi2c_4;
		i2c5 = &hsi2c_5;
		i2c6 = &hsi2c_6;
		i2c7 = &hsi2c_7;
		i2c8 = &hsi2c_8;
		i2c9 = &hsi2c_9;
		i2c10 = &hsi2c_10;
		gsc0 = &gsc_0;
		gsc1 = &gsc_1;
		spi0 = &spi_0;
		spi1 = &spi_1;
		spi2 = &spi_2;
		usbdrdphy0 = &usbdrd_phy0;
		usbdrdphy1 = &usbdrd_phy1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x0>;
			clock-frequency = <1800000000>;
			cci-control-port = <&cci_control1>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x1>;
			clock-frequency = <1800000000>;
			cci-control-port = <&cci_control1>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x2>;
			clock-frequency = <1800000000>;
			cci-control-port = <&cci_control1>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x3>;
			clock-frequency = <1800000000>;
			cci-control-port = <&cci_control1>;
		};

		cpu4: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x100>;
			clock-frequency = <1000000000>;
			cci-control-port = <&cci_control0>;
		};

		cpu5: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x101>;
			clock-frequency = <1000000000>;
			cci-control-port = <&cci_control0>;
		};

		cpu6: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x102>;
			clock-frequency = <1000000000>;
			cci-control-port = <&cci_control0>;
		};

		cpu7: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x103>;
			clock-frequency = <1000000000>;
			cci-control-port = <&cci_control0>;
		};
	};

	cci@10d20000 {
		compatible = "arm,cci-400";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x10d20000 0x1000>;
		ranges = <0x0 0x10d20000 0x6000>;

		cci_control0: slave-if@4000 {
			compatible = "arm,cci-400-ctrl-if";
			interface-type = "ace";
			reg = <0x4000 0x1000>;
		};
		cci_control1: slave-if@5000 {
			compatible = "arm,cci-400-ctrl-if";
			interface-type = "ace";
			reg = <0x5000 0x1000>;
		};
	};

	sysram@02020000 {
		compatible = "mmio-sram";
		reg = <0x02020000 0x54000>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x02020000 0x54000>;

		smp-sysram@0 {
			compatible = "samsung,exynos4210-sysram";
			reg = <0x0 0x1000>;
		};

		smp-sysram@53000 {
			compatible = "samsung,exynos4210-sysram-ns";
			reg = <0x53000 0x1000>;
		};
	};

	clock: clock-controller@10010000 {
		compatible = "samsung,exynos5420-clock";
		reg = <0x10010000 0x30000>;
		#clock-cells = <1>;
	};

	clock_audss: audss-clock-controller@3810000 {
		compatible = "samsung,exynos5420-audss-clock";
		reg = <0x03810000 0x0C>;
		#clock-cells = <1>;
		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
	};

	mfc: codec@11000000 {
		compatible = "samsung,mfc-v7";
		reg = <0x11000000 0x10000>;
		interrupts = <0 96 0>;
		clocks = <&clock CLK_MFC>;
		clock-names = "mfc";
		samsung,power-domain = <&mfc_pd>;
	};

	mmc_0: mmc@12200000 {
		compatible = "samsung,exynos5420-dw-mshc-smu";
		interrupts = <0 75 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12200000 0x2000>;
		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x40>;
		status = "disabled";
	};

	mmc_1: mmc@12210000 {
		compatible = "samsung,exynos5420-dw-mshc-smu";
		interrupts = <0 76 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12210000 0x2000>;
		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x40>;
		status = "disabled";
	};

	mmc_2: mmc@12220000 {
		compatible = "samsung,exynos5420-dw-mshc";
		interrupts = <0 77 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12220000 0x1000>;
		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x40>;
		status = "disabled";
	};

	mct: mct@101C0000 {
		compatible = "samsung,exynos4210-mct";
		reg = <0x101C0000 0x800>;
		interrupt-controller;
		#interrups-cells = <1>;
		interrupt-parent = <&mct_map>;
		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
				<8>, <9>, <10>, <11>;
		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
		clock-names = "fin_pll", "mct";

		mct_map: mct-map {
			#interrupt-cells = <1>;
			#address-cells = <0>;
			#size-cells = <0>;
			interrupt-map = <0 &combiner 23 3>,
					<1 &combiner 23 4>,
					<2 &combiner 25 2>,
					<3 &combiner 25 3>,
					<4 &gic 0 120 0>,
					<5 &gic 0 121 0>,
					<6 &gic 0 122 0>,
					<7 &gic 0 123 0>,
					<8 &gic 0 128 0>,
					<9 &gic 0 129 0>,
					<10 &gic 0 130 0>,
					<11 &gic 0 131 0>;
		};
	};

	gsc_pd: power-domain@10044000 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044000 0x20>;
	};

	isp_pd: power-domain@10044020 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044020 0x20>;
	};

	mfc_pd: power-domain@10044060 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044060 0x20>;
		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
			<&clock CLK_MOUT_USER_ACLK333>;
		clock-names = "oscclk", "pclk0", "clk0";
	};

	msc_pd: power-domain@10044120 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044120 0x20>;
	};

	pinctrl_0: pinctrl@13400000 {
		compatible = "samsung,exynos5420-pinctrl";
		reg = <0x13400000 0x1000>;
		interrupts = <0 45 0>;

		wakeup-interrupt-controller {
			compatible = "samsung,exynos4210-wakeup-eint";
			interrupt-parent = <&gic>;
			interrupts = <0 32 0>;
		};
	};

	pinctrl_1: pinctrl@13410000 {
		compatible = "samsung,exynos5420-pinctrl";
		reg = <0x13410000 0x1000>;
		interrupts = <0 78 0>;
	};

	pinctrl_2: pinctrl@14000000 {
		compatible = "samsung,exynos5420-pinctrl";
		reg = <0x14000000 0x1000>;
		interrupts = <0 46 0>;
	};

	pinctrl_3: pinctrl@14010000 {
		compatible = "samsung,exynos5420-pinctrl";
		reg = <0x14010000 0x1000>;
		interrupts = <0 50 0>;
	};

	pinctrl_4: pinctrl@03860000 {
		compatible = "samsung,exynos5420-pinctrl";
		reg = <0x03860000 0x1000>;
		interrupts = <0 47 0>;
	};

	rtc: rtc@101E0000 {
		clocks = <&clock CLK_RTC>;
		clock-names = "rtc";
		status = "disabled";
	};

	amba {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "arm,amba-bus";
		interrupt-parent = <&gic>;
		ranges;

		adma: adma@03880000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x03880000 0x1000>;
			interrupts = <0 110 0>;
			clocks = <&clock_audss EXYNOS_ADMA>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <6>;
			#dma-requests = <16>;
		};

		pdma0: pdma@121A0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x121A0000 0x1000>;
			interrupts = <0 34 0>;
			clocks = <&clock CLK_PDMA0>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <32>;
		};

		pdma1: pdma@121B0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x121B0000 0x1000>;
			interrupts = <0 35 0>;
			clocks = <&clock CLK_PDMA1>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <32>;
		};

		mdma0: mdma@10800000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x10800000 0x1000>;
			interrupts = <0 33 0>;
			clocks = <&clock CLK_MDMA0>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <1>;
		};

		mdma1: mdma@11C10000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x11C10000 0x1000>;
			interrupts = <0 124 0>;
			clocks = <&clock CLK_MDMA1>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <1>;
			/*
			 * MDMA1 can support both secure and non-secure
			 * AXI transactions. When this is enabled in the kernel
			 * for boards that run in secure mode, we are getting
			 * imprecise external aborts causing the kernel to oops.
			 */
			status = "disabled";
		};
	};

	i2s0: i2s@03830000 {
		compatible = "samsung,exynos5420-i2s";
		reg = <0x03830000 0x100>;
		dmas = <&adma 0
			&adma 2
			&adma 1>;
		dma-names = "tx", "rx", "tx-sec";
		clocks = <&clock_audss EXYNOS_I2S_BUS>,
			<&clock_audss EXYNOS_I2S_BUS>,
			<&clock_audss EXYNOS_SCLK_I2S>;
		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
		samsung,idma-addr = <0x03000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s0_bus>;
		status = "disabled";
	};

	i2s1: i2s@12D60000 {
		compatible = "samsung,exynos5420-i2s";
		reg = <0x12D60000 0x100>;
		dmas = <&pdma1 12
			&pdma1 11>;
		dma-names = "tx", "rx";
		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
		clock-names = "iis", "i2s_opclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1_bus>;
		status = "disabled";
	};

	i2s2: i2s@12D70000 {
		compatible = "samsung,exynos5420-i2s";
		reg = <0x12D70000 0x100>;
		dmas = <&pdma0 12
			&pdma0 11>;
		dma-names = "tx", "rx";
		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
		clock-names = "iis", "i2s_opclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s2_bus>;
		status = "disabled";
	};

	spi_0: spi@12d20000 {
		compatible = "samsung,exynos4210-spi";
		reg = <0x12d20000 0x100>;
		interrupts = <0 68 0>;
		dmas = <&pdma0 5
			&pdma0 4>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi0_bus>;
		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
		clock-names = "spi", "spi_busclk0";
		status = "disabled";
	};

	spi_1: spi@12d30000 {
		compatible = "samsung,exynos4210-spi";
		reg = <0x12d30000 0x100>;
		interrupts = <0 69 0>;
		dmas = <&pdma1 5
			&pdma1 4>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi1_bus>;
		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
		clock-names = "spi", "spi_busclk0";
		status = "disabled";
	};

	spi_2: spi@12d40000 {
		compatible = "samsung,exynos4210-spi";
		reg = <0x12d40000 0x100>;
		interrupts = <0 70 0>;
		dmas = <&pdma0 7
			&pdma0 6>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi2_bus>;
		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
		clock-names = "spi", "spi_busclk0";
		status = "disabled";
	};

	uart_0: serial@12C00000 {
		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
		clock-names = "uart", "clk_uart_baud0";
	};

	uart_1: serial@12C10000 {
		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
		clock-names = "uart", "clk_uart_baud0";
	};

	uart_2: serial@12C20000 {
		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
		clock-names = "uart", "clk_uart_baud0";
	};

	uart_3: serial@12C30000 {
		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
		clock-names = "uart", "clk_uart_baud0";
	};

	pwm: pwm@12dd0000 {
		compatible = "samsung,exynos4210-pwm";
		reg = <0x12dd0000 0x100>;
		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
		#pwm-cells = <3>;
		clocks = <&clock CLK_PWM>;
		clock-names = "timers";
	};

	dp_phy: video-phy@10040728 {
		compatible = "samsung,exynos5250-dp-video-phy";
		reg = <0x10040728 4>;
		#phy-cells = <0>;
	};

	dp: dp-controller@145B0000 {
		clocks = <&clock CLK_DP1>;
		clock-names = "dp";
		phys = <&dp_phy>;
		phy-names = "dp";
	};

	mipi_phy: video-phy@10040714 {
		compatible = "samsung,s5pv210-mipi-video-phy";
		reg = <0x10040714 12>;
		#phy-cells = <1>;
	};

	dsi@14500000 {
		compatible = "samsung,exynos5410-mipi-dsi";
		reg = <0x14500000 0x10000>;
		interrupts = <0 82 0>;
		phys = <&mipi_phy 1>;
		phy-names = "dsim";
		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
		clock-names = "bus_clk", "pll_clk";
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	fimd: fimd@14400000 {
		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
		clock-names = "sclk_fimd", "fimd";
	};

	adc: adc@12D10000 {
		compatible = "samsung,exynos-adc-v2";
		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
		interrupts = <0 106 0>;
		clocks = <&clock CLK_TSADC>;
		clock-names = "adc";
		#io-channel-cells = <1>;
		io-channel-ranges;
		status = "disabled";
	};

	i2c_0: i2c@12C60000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C60000 0x100>;
		interrupts = <0 56 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C0>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c0_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_1: i2c@12C70000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C70000 0x100>;
		interrupts = <0 57 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C1>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c1_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_2: i2c@12C80000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C80000 0x100>;
		interrupts = <0 58 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C2>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_3: i2c@12C90000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C90000 0x100>;
		interrupts = <0 59 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C3>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c3_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	hsi2c_4: i2c@12CA0000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12CA0000 0x1000>;
		interrupts = <0 60 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c4_hs_bus>;
		clocks = <&clock CLK_USI0>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_5: i2c@12CB0000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12CB0000 0x1000>;
		interrupts = <0 61 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c5_hs_bus>;
		clocks = <&clock CLK_USI1>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_6: i2c@12CC0000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12CC0000 0x1000>;
		interrupts = <0 62 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c6_hs_bus>;
		clocks = <&clock CLK_USI2>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_7: i2c@12CD0000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12CD0000 0x1000>;
		interrupts = <0 63 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c7_hs_bus>;
		clocks = <&clock CLK_USI3>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_8: i2c@12E00000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12E00000 0x1000>;
		interrupts = <0 87 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c8_hs_bus>;
		clocks = <&clock CLK_USI4>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_9: i2c@12E10000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12E10000 0x1000>;
		interrupts = <0 88 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c9_hs_bus>;
		clocks = <&clock CLK_USI5>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hsi2c_10: i2c@12E20000 {
		compatible = "samsung,exynos5-hsi2c";
		reg = <0x12E20000 0x1000>;
		interrupts = <0 203 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c10_hs_bus>;
		clocks = <&clock CLK_USI6>;
		clock-names = "hsi2c";
		status = "disabled";
	};

	hdmi: hdmi@14530000 {
		compatible = "samsung,exynos5420-hdmi";
		reg = <0x14530000 0x70000>;
		interrupts = <0 95 0>;
		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
			 <&clock CLK_MOUT_HDMI>;
		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
			"sclk_hdmiphy", "mout_hdmi";
		phy = <&hdmiphy>;
		samsung,syscon-phandle = <&pmu_system_controller>;
		status = "disabled";
	};

	hdmiphy: hdmiphy@145D0000 {
		reg = <0x145D0000 0x20>;
	};

	mixer: mixer@14450000 {
		compatible = "samsung,exynos5420-mixer";
		reg = <0x14450000 0x10000>;
		interrupts = <0 94 0>;
		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
		clock-names = "mixer", "sclk_hdmi";
	};

	gsc_0: video-scaler@13e00000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e00000 0x1000>;
		interrupts = <0 85 0>;
		clocks = <&clock CLK_GSCL0>;
		clock-names = "gscl";
		samsung,power-domain = <&gsc_pd>;
	};

	gsc_1: video-scaler@13e10000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e10000 0x1000>;
		interrupts = <0 86 0>;
		clocks = <&clock CLK_GSCL1>;
		clock-names = "gscl";
		samsung,power-domain = <&gsc_pd>;
	};

	pmu_system_controller: system-controller@10040000 {
		compatible = "samsung,exynos5420-pmu", "syscon";
		reg = <0x10040000 0x5000>;
		clock-names = "clkout16";
		clocks = <&clock CLK_FIN_PLL>;
		#clock-cells = <1>;
	};

	sysreg_system_controller: syscon@10050000 {
		compatible = "samsung,exynos5-sysreg", "syscon";
		reg = <0x10050000 0x5000>;
	};

	tmu_cpu0: tmu@10060000 {
		compatible = "samsung,exynos5420-tmu";
		reg = <0x10060000 0x100>;
		interrupts = <0 65 0>;
		clocks = <&clock CLK_TMU>;
		clock-names = "tmu_apbif";
	};

	tmu_cpu1: tmu@10064000 {
		compatible = "samsung,exynos5420-tmu";
		reg = <0x10064000 0x100>;
		interrupts = <0 183 0>;
		clocks = <&clock CLK_TMU>;
		clock-names = "tmu_apbif";
	};

	tmu_cpu2: tmu@10068000 {
		compatible = "samsung,exynos5420-tmu-ext-triminfo";
		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
		interrupts = <0 184 0>;
		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
	};

	tmu_cpu3: tmu@1006c000 {
		compatible = "samsung,exynos5420-tmu-ext-triminfo";
		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
		interrupts = <0 185 0>;
		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
	};

	tmu_gpu: tmu@100a0000 {
		compatible = "samsung,exynos5420-tmu-ext-triminfo";
		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
		interrupts = <0 215 0>;
		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
	};

        watchdog: watchdog@101D0000 {
		compatible = "samsung,exynos5420-wdt";
		reg = <0x101D0000 0x100>;
		interrupts = <0 42 0>;
		clocks = <&clock CLK_WDT>;
		clock-names = "watchdog";
		samsung,syscon-phandle = <&pmu_system_controller>;
        };

	sss: sss@10830000 {
		compatible = "samsung,exynos4210-secss";
		reg = <0x10830000 0x10000>;
		interrupts = <0 112 0>;
		clocks = <&clock CLK_SSS>;
		clock-names = "secss";
	};

	usbdrd3_0: usb@12000000 {
		compatible = "samsung,exynos5250-dwusb3";
		clocks = <&clock CLK_USBD300>;
		clock-names = "usbdrd30";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		usbdrd_dwc3_0: dwc3 {
			compatible = "snps,dwc3";
			reg = <0x12000000 0x10000>;
			interrupts = <0 72 0>;
			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
			phy-names = "usb2-phy", "usb3-phy";
		};
	};

	usbdrd_phy0: phy@12100000 {
		compatible = "samsung,exynos5420-usbdrd-phy";
		reg = <0x12100000 0x100>;
		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
		clock-names = "phy", "ref";
		samsung,pmu-syscon = <&pmu_system_controller>;
		#phy-cells = <1>;
	};

	usbdrd3_1: usb@12400000 {
		compatible = "samsung,exynos5250-dwusb3";
		clocks = <&clock CLK_USBD301>;
		clock-names = "usbdrd30";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		usbdrd_dwc3_1: dwc3 {
			compatible = "snps,dwc3";
			reg = <0x12400000 0x10000>;
			interrupts = <0 73 0>;
			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
			phy-names = "usb2-phy", "usb3-phy";
		};
	};

	usbdrd_phy1: phy@12500000 {
		compatible = "samsung,exynos5420-usbdrd-phy";
		reg = <0x12500000 0x100>;
		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
		clock-names = "phy", "ref";
		samsung,pmu-syscon = <&pmu_system_controller>;
		#phy-cells = <1>;
	};

	usbhost2: usb@12110000 {
		compatible = "samsung,exynos4210-ehci";
		reg = <0x12110000 0x100>;
		interrupts = <0 71 0>;

		clocks = <&clock CLK_USBH20>;
		clock-names = "usbhost";
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			phys = <&usb2_phy 1>;
		};
	};

	usbhost1: usb@12120000 {
		compatible = "samsung,exynos4210-ohci";
		reg = <0x12120000 0x100>;
		interrupts = <0 71 0>;

		clocks = <&clock CLK_USBH20>;
		clock-names = "usbhost";
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			phys = <&usb2_phy 1>;
		};
	};

	usb2_phy: phy@12130000 {
		compatible = "samsung,exynos5250-usb2-phy";
		reg = <0x12130000 0x100>;
		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
		clock-names = "phy", "ref";
		#phy-cells = <1>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		samsung,pmureg-phandle = <&pmu_system_controller>;
	};
};