1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
*/
#include "omap3-gta04.dtsi"
/ {
model = "Goldelico GTA04A5/Letux 2804";
sound {
ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
};
wlan_en: wlan_en_regulator {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&wlan_pins>;
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
startup-delay-us = <70000>;
enable-active-high;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pps_pins>;
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
};
};
&gpio5 {
irda-en-hog {
gpio-hog;
gpios = <(175-160) GPIO_ACTIVE_HIGH>;
output-high; /* activate gpio_175 to disable IrDA receiver */
};
};
&omap3_pmx_core {
bt_pins: pinmux_bt_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
>;
};
wlan_irq_pin: pinmux_wlan_irq_pin {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
>;
};
irda_pins: pinmux_irda {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
>;
};
pps_pins: pinmux_pps_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
>;
};
};
/*
* for WL183x module see
* Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
*/
&wifi_pwrseq {
/delete-property/ reset-gpios;
};
&mmc2 {
vmmc-supply = <&wlan_en>;
bus-width = <4>;
cap-power-off-card;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&wlan_irq_pin>;
#address-cells = <1>;
#size-cells = <0>;
/delete-property/ mmc-pwrseq;
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio5>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
ref-clock-frequency = <26000000>;
};
};
&i2c2 {
/delete-node/ bmp085@77;
/delete-node/ bma180@41;
/delete-node/ itg3200@68;
/delete-node/ hmc5843@1e;
bmg160@69 {
compatible = "bosch,bmg160";
reg = <0x69>;
};
bmc150@10 {
compatible = "bosch,bmc150_accel";
reg = <0x10>;
};
bmc150@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
};
bme280@76 {
compatible = "bosch,bme280";
reg = <0x76>;
};
};
|
