1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
|
// SPDX-License-Identifier: GPL-2.0
/*
* AD7606 Parallel Interface ADC driver
*
* Copyright 2011 Analog Devices Inc.
*/
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
#include "ad7606.h"
static int ad7606_par16_read_block(struct device *dev,
int count, void *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad7606_state *st = iio_priv(indio_dev);
/*
* On the parallel interface, the frstdata signal is set to high while
* and after reading the sample of the first channel and low for all
* other channels. This can be used to check that the incoming data is
* correctly aligned. During normal operation the data should never
* become unaligned, but some glitch or electrostatic discharge might
* cause an extra read or clock cycle. Monitoring the frstdata signal
* allows to recover from such failure situations.
*/
int num = count;
u16 *_buf = buf;
if (st->gpio_frstdata) {
insw((unsigned long)st->base_address, _buf, 1);
if (!gpiod_get_value(st->gpio_frstdata)) {
ad7606_reset(st);
return -EIO;
}
_buf++;
num--;
}
insw((unsigned long)st->base_address, _buf, num);
return 0;
}
static const struct ad7606_bus_ops ad7606_par16_bops = {
.read_block = ad7606_par16_read_block,
};
static int ad7606_par8_read_block(struct device *dev,
int count, void *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad7606_state *st = iio_priv(indio_dev);
/*
* On the parallel interface, the frstdata signal is set to high while
* and after reading the sample of the first channel and low for all
* other channels. This can be used to check that the incoming data is
* correctly aligned. During normal operation the data should never
* become unaligned, but some glitch or electrostatic discharge might
* cause an extra read or clock cycle. Monitoring the frstdata signal
* allows to recover from such failure situations.
*/
int num = count;
u16 *_buf = buf;
if (st->gpio_frstdata) {
insb((unsigned long)st->base_address, _buf, 2);
if (!gpiod_get_value(st->gpio_frstdata)) {
ad7606_reset(st);
return -EIO;
}
_buf++;
num--;
}
insb((unsigned long)st->base_address, _buf, num * 2);
return 0;
}
static const struct ad7606_bus_ops ad7606_par8_bops = {
.read_block = ad7606_par8_read_block,
};
static int ad7606_par_probe(struct platform_device *pdev)
{
const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
void __iomem *addr;
resource_size_t remap_size;
int irq;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
addr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(addr))
return PTR_ERR(addr);
remap_size = resource_size(res);
return ad7606_probe(&pdev->dev, irq, addr,
id->name, id->driver_data,
remap_size > 1 ? &ad7606_par16_bops :
&ad7606_par8_bops);
}
static const struct platform_device_id ad7606_driver_ids[] = {
{ .name = "ad7605-4", .driver_data = ID_AD7605_4, },
{ .name = "ad7606-4", .driver_data = ID_AD7606_4, },
{ .name = "ad7606-6", .driver_data = ID_AD7606_6, },
{ .name = "ad7606-8", .driver_data = ID_AD7606_8, },
{ }
};
MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
static const struct of_device_id ad7606_of_match[] = {
{ .compatible = "adi,ad7605-4" },
{ .compatible = "adi,ad7606-4" },
{ .compatible = "adi,ad7606-6" },
{ .compatible = "adi,ad7606-8" },
{ },
};
MODULE_DEVICE_TABLE(of, ad7606_of_match);
static struct platform_driver ad7606_driver = {
.probe = ad7606_par_probe,
.id_table = ad7606_driver_ids,
.driver = {
.name = "ad7606",
.pm = AD7606_PM_OPS,
.of_match_table = ad7606_of_match,
},
};
module_platform_driver(ad7606_driver);
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(IIO_AD7606);
|
