1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
|
/*
* Copyright (C) 2013 BayHub Technology Ltd.
*
* Authors: Peter Guo <peter.guo@bayhubtech.com>
* Adam Lee <adam.lee@canonical.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/pci.h>
#include "sdhci.h"
#include "sdhci-pci.h"
/*
* O2Micro device registers
*/
#define O2_SD_MISC_REG5 0x64
#define O2_SD_LD0_CTRL 0x68
#define O2_SD_DEV_CTRL 0x88
#define O2_SD_LOCK_WP 0xD3
#define O2_SD_TEST_REG 0xD4
#define O2_SD_FUNC_REG0 0xDC
#define O2_SD_MULTI_VCC3V 0xEE
#define O2_SD_CLKREQ 0xEC
#define O2_SD_CAPS 0xE0
#define O2_SD_ADMA1 0xE2
#define O2_SD_ADMA2 0xE7
#define O2_SD_INF_MOD 0xF1
#define O2_SD_MISC_CTRL4 0xFC
#define O2_SD_TUNING_CTRL 0x300
#define O2_SD_PLL_SETTING 0x304
#define O2_SD_CLK_SETTING 0x328
#define O2_SD_CAP_REG2 0x330
#define O2_SD_CAP_REG0 0x334
#define O2_SD_UHS1_CAP_SETTING 0x33C
#define O2_SD_DELAY_CTRL 0x350
#define O2_SD_UHS2_L1_CTRL 0x35C
#define O2_SD_FUNC_REG3 0x3E0
#define O2_SD_FUNC_REG4 0x3E4
#define O2_SD_LED_ENABLE BIT(6)
#define O2_SD_FREG0_LEDOFF BIT(13)
#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22)
#define O2_SD_VENDOR_SETTING 0x110
#define O2_SD_VENDOR_SETTING2 0x1C8
static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
{
u32 scratch_32;
pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
scratch_32 &= 0x0000FFFF;
scratch_32 |= value;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
}
static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
{
int ret;
u32 scratch_32;
/* Set led of SD host function enable */
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG0, &scratch_32);
if (ret)
return;
scratch_32 &= ~O2_SD_FREG0_LEDOFF;
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG0, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_TEST_REG, &scratch_32);
if (ret)
return;
scratch_32 |= O2_SD_LED_ENABLE;
pci_write_config_dword(chip->pdev,
O2_SD_TEST_REG, scratch_32);
}
static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
{
u32 scratch_32;
int ret;
/* Improve write performance for SD3.0 */
ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
/* Enable Link abnormal reset generating Reset */
ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 19) | (1 << 11));
scratch_32 |= (1 << 10);
pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
/* set card power over current protection */
ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
if (ret)
return;
scratch_32 |= (1 << 4);
pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
/* adjust the output delay for SD mode */
pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
/* Set the output voltage setting of Aux 1.2v LDO */
ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(3 << 12);
pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
/* Set Max power supply capability of SD host */
ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x01FE);
scratch_32 |= 0x00CC;
pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
/* Set DLL Tuning Window */
ret = pci_read_config_dword(chip->pdev,
O2_SD_TUNING_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000000FF);
scratch_32 |= 0x00000066;
pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
/* Set UHS2 T_EIDLE */
ret = pci_read_config_dword(chip->pdev,
O2_SD_UHS2_L1_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000000FC);
scratch_32 |= 0x00000084;
pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
/* Set UHS2 Termination */
ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0xf0000000);
scratch_32 |= 0x30000000;
pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_MISC_CTRL4, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000f0000);
scratch_32 |= 0x00080000;
pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
}
int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
struct sdhci_host *host;
u32 reg;
chip = slot->chip;
host = slot->host;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_SDS0:
case PCI_DEVICE_ID_O2_SEABIRD0:
case PCI_DEVICE_ID_O2_SEABIRD1:
case PCI_DEVICE_ID_O2_SDS1:
case PCI_DEVICE_ID_O2_FUJIN2:
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
if (reg & 0x1)
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
break;
/* set dll watch dog timer */
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
reg |= (1 << 12);
sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
break;
default:
break;
}
return 0;
}
int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
u32 scratch_32;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_8220:
case PCI_DEVICE_ID_O2_8221:
case PCI_DEVICE_ID_O2_8320:
case PCI_DEVICE_ID_O2_8321:
/* This extra setup is required due to broken ADMA. */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
/* Set Multi 3 to VCC3V# */
pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
/* Disable CLK_REQ# support after media DET */
ret = pci_read_config_byte(chip->pdev,
O2_SD_CLKREQ, &scratch);
if (ret)
return ret;
scratch |= 0x20;
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
/* Choose capabilities, enable SDMA. We have to write 0x01
* to the capabilities register first to unlock it.
*/
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
if (ret)
return ret;
scratch |= 0x01;
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
/* Disable ADMA1/2 */
pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
/* Disable the infinite transfer mode */
ret = pci_read_config_byte(chip->pdev,
O2_SD_INF_MOD, &scratch);
if (ret)
return ret;
scratch |= 0x08;
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SDS0:
case PCI_DEVICE_ID_O2_SDS1:
case PCI_DEVICE_ID_O2_FUJIN2:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
/* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG0,
&scratch_32);
scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
/* Check Whether subId is 0x11 or 0x12 */
if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
scratch_32 = 0x2c280000;
/* Set Base Clock to 208MZ */
o2_pci_set_baseclk(chip, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
&scratch_32);
/* Enable Base Clk setting change */
scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
scratch_32);
/* Set Tuning Window to 4 */
pci_write_config_byte(chip->pdev,
O2_SD_TUNING_CTRL, 0x44);
break;
}
}
/* Enable 8520 led function */
o2_pci_led_enable(chip);
/* Set timeout CLK */
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLK_SETTING, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0xFF00);
scratch_32 |= 0x07E0C800;
pci_write_config_dword(chip->pdev,
O2_SD_CLK_SETTING, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLKREQ, &scratch_32);
if (ret)
return ret;
scratch_32 |= 0x3;
pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0x1F3F070E);
scratch_32 |= 0x18270106;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
/* Disable UHS1 funciton */
ret = pci_read_config_dword(chip->pdev,
O2_SD_CAP_REG2, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0xE0);
pci_write_config_dword(chip->pdev,
O2_SD_CAP_REG2, scratch_32);
if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
sdhci_pci_o2_fujin2_pci_init(chip);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
if ((scratch_32 & 0xff000000) == 0x01000000) {
scratch_32 &= 0x0000FFFF;
scratch_32 |= 0x1F340000;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
} else {
scratch_32 &= 0x0000FFFF;
scratch_32 |= 0x2c280000;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
&scratch_32);
scratch_32 |= (1 << 22);
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG4, scratch_32);
}
/* Set Tuning Windows to 5 */
pci_write_config_byte(chip->pdev,
O2_SD_TUNING_CTRL, 0x55);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
{
sdhci_pci_o2_probe(chip);
return sdhci_pci_resume_host(chip);
}
#endif
|
