1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
enum {
DSV_OUT_VLCM = 0,
DSV_OUT_VPOS,
DSV_OUT_VNEG,
DSV_OUT_MAX
};
#define RT4831_REG_DSVEN 0x09
#define RT4831_REG_VLCM 0x0c
#define RT4831_REG_VPOS 0x0d
#define RT4831_REG_VNEG 0x0e
#define RT4831_REG_FLAGS 0x0f
#define RT4831_VOLT_MASK GENMASK(5, 0)
#define RT4831_DSVMODE_SHIFT 5
#define RT4831_DSVMODE_MASK GENMASK(7, 5)
#define RT4831_POSADEN_MASK BIT(4)
#define RT4831_NEGADEN_MASK BIT(3)
#define RT4831_POSEN_MASK BIT(2)
#define RT4831_NEGEN_MASK BIT(1)
#define RT4831_OTP_MASK BIT(6)
#define RT4831_LCMOVP_MASK BIT(5)
#define RT4831_VPOSSCP_MASK BIT(3)
#define RT4831_VNEGSCP_MASK BIT(2)
#define DSV_MODE_NORMAL (0x4 << RT4831_DSVMODE_SHIFT)
#define DSV_MODE_BYPASS (0x6 << RT4831_DSVMODE_SHIFT)
#define STEP_UV 50000
#define VLCM_MIN_UV 4000000
#define VLCM_MAX_UV 7150000
#define VLCM_N_VOLTAGES ((VLCM_MAX_UV - VLCM_MIN_UV) / STEP_UV + 1)
#define VPN_MIN_UV 4000000
#define VPN_MAX_UV 6500000
#define VPN_N_VOLTAGES ((VPN_MAX_UV - VPN_MIN_UV) / STEP_UV + 1)
static int rt4831_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
{
struct regmap *regmap = rdev_get_regmap(rdev);
int rid = rdev_get_id(rdev);
unsigned int val, events = 0;
int ret;
ret = regmap_read(regmap, RT4831_REG_FLAGS, &val);
if (ret)
return ret;
if (val & RT4831_OTP_MASK)
events |= REGULATOR_ERROR_OVER_TEMP;
if (rid == DSV_OUT_VLCM && (val & RT4831_LCMOVP_MASK))
events |= REGULATOR_ERROR_OVER_CURRENT;
if (rid == DSV_OUT_VPOS && (val & RT4831_VPOSSCP_MASK))
events |= REGULATOR_ERROR_OVER_CURRENT;
if (rid == DSV_OUT_VNEG && (val & RT4831_VNEGSCP_MASK))
events |= REGULATOR_ERROR_OVER_CURRENT;
*flags = events;
return 0;
}
static const struct regulator_ops rt4831_dsvlcm_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_bypass = regulator_set_bypass_regmap,
.get_bypass = regulator_get_bypass_regmap,
.get_error_flags = rt4831_get_error_flags,
};
static const struct regulator_ops rt4831_dsvpn_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
.get_error_flags = rt4831_get_error_flags,
};
static const struct regulator_desc rt4831_regulator_descs[] = {
{
.name = "DSVLCM",
.ops = &rt4831_dsvlcm_ops,
.of_match = of_match_ptr("DSVLCM"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.id = DSV_OUT_VLCM,
.n_voltages = VLCM_N_VOLTAGES,
.min_uV = VLCM_MIN_UV,
.uV_step = STEP_UV,
.vsel_reg = RT4831_REG_VLCM,
.vsel_mask = RT4831_VOLT_MASK,
.bypass_reg = RT4831_REG_DSVEN,
.bypass_mask = RT4831_DSVMODE_MASK,
.bypass_val_on = DSV_MODE_BYPASS,
.bypass_val_off = DSV_MODE_NORMAL,
.owner = THIS_MODULE,
},
{
.name = "DSVP",
.ops = &rt4831_dsvpn_ops,
.of_match = of_match_ptr("DSVP"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.id = DSV_OUT_VPOS,
.n_voltages = VPN_N_VOLTAGES,
.min_uV = VPN_MIN_UV,
.uV_step = STEP_UV,
.vsel_reg = RT4831_REG_VPOS,
.vsel_mask = RT4831_VOLT_MASK,
.enable_reg = RT4831_REG_DSVEN,
.enable_mask = RT4831_POSEN_MASK,
.active_discharge_reg = RT4831_REG_DSVEN,
.active_discharge_mask = RT4831_POSADEN_MASK,
.owner = THIS_MODULE,
},
{
.name = "DSVN",
.ops = &rt4831_dsvpn_ops,
.of_match = of_match_ptr("DSVN"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.id = DSV_OUT_VNEG,
.n_voltages = VPN_N_VOLTAGES,
.min_uV = VPN_MIN_UV,
.uV_step = STEP_UV,
.vsel_reg = RT4831_REG_VNEG,
.vsel_mask = RT4831_VOLT_MASK,
.enable_reg = RT4831_REG_DSVEN,
.enable_mask = RT4831_NEGEN_MASK,
.active_discharge_reg = RT4831_REG_DSVEN,
.active_discharge_mask = RT4831_NEGADEN_MASK,
.owner = THIS_MODULE,
}
};
static int rt4831_regulator_probe(struct platform_device *pdev)
{
struct regmap *regmap;
struct regulator_dev *rdev;
struct regulator_config config = {};
int i, ret;
regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!regmap) {
dev_err(&pdev->dev, "Failed to init regmap\n");
return -ENODEV;
}
/* Configure DSV mode to normal by default */
ret = regmap_update_bits(regmap, RT4831_REG_DSVEN, RT4831_DSVMODE_MASK, DSV_MODE_NORMAL);
if (ret) {
dev_err(&pdev->dev, "Failed to configure dsv mode to normal\n");
return ret;
}
config.dev = pdev->dev.parent;
config.regmap = regmap;
for (i = 0; i < DSV_OUT_MAX; i++) {
rdev = devm_regulator_register(&pdev->dev, rt4831_regulator_descs + i, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %d regulator\n", i);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id rt4831_regulator_match[] = {
{ "rt4831-regulator", 0 },
{}
};
MODULE_DEVICE_TABLE(platform, rt4831_regulator_match);
static struct platform_driver rt4831_regulator_driver = {
.driver = {
.name = "rt4831-regulator",
},
.id_table = rt4831_regulator_match,
.probe = rt4831_regulator_probe,
};
module_platform_driver(rt4831_regulator_driver);
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
MODULE_LICENSE("GPL v2");
|