mdadm/tests: 07changelevels fix

There are five changes to this case.

1. remove testdev check. It can't work anymore and check if it's a
block device directly.

2. It can't change level and chunk size at the same time

3. Sleep more than 10s before check wait.
The test devices are small. Sometimes it can finish so quickly once
the reshape just starts. mdadm will be stuck before it waits reshape
to start. So the sync speed is limited. And it restores the sync speed
when it waits reshape to finish. It's good for case without backup
file.

It uses systemd service mdadm-grow-continue to monitor reshape
progress when specifying backup file. If reshape finishes so quickly
before it starts monitoring reshape progress, the daemon will be stuck
too. Because reshape_progress is 0 which means the reshape hasn't been
started. So give more time to let service can get right information
from kernel space.

But before getting these information. It needs to suspend array. At
the same time the reshape is running. The kernel reshape daemon will
update metadata 10s. So it needs to limit the sync speed more than 10s
before restoring sync speed. Then systemd service can suspend array
and start monitoring reshape progress.

4. Wait until mdadm-grow-continue service exits
mdadm --wait doesn't wait systemd service. For the case that needs
backup file, systemd service deletes the backup file after reshape
finishes. In this test case, it runs next case when reshape finishes.
And it fails because it can't create backup file because the backup
file exits.

5. Don't reshape from raid5 to raid1. It can't work now.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>

4 files changed, 16 insertions, 24 deletions

diff --git a/dev/null b/dev/null
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/dev/null
diff --git a/tests/07changelevels b/tests/07changelevels
index a328874a..3df8660e 100644
--- a/tests/07changelevels
+++ b/tests/07changelevels
@@ -10,7 +10,6 @@ export MDADM_GROW_VERIFY=1
 dotest() {
  sleep 2
  check wait
- testdev $md0 $1 19968 64 nd
  blockdev --flushbufs $md0
  cmp -s -n $[textK*1024] $md0 /tmp/RandFile || { echo cmp failed; exit 2; }
  # write something new - shift chars 4 space
@@ -24,7 +23,7 @@ checkgeo() {
  # level raid_disks chunk_size layout
  dev=$1
  shift
- sleep 0.5
+ sleep 15
  check wait
  sleep 1
  for attr in level raid_disks chunk_size layout
@@ -43,22 +42,25 @@ checkgeo() {
 
 bu=/tmp/md-test-backup
 rm -f $bu
-mdadm -CR $md0 -l1 -n2 -x1 $dev0 $dev1 $dev2 -z 19968
-testdev $md0 1 $mdsize1a 64
+mdadm -CR $md0 -l1 -n2 -x1 $dev0 $dev1 $dev2
+[ -b $md0 ] || die "$1 isn't a block device."
 dd if=/tmp/RandFile of=$md0
 dotest 1
 
-mdadm --grow $md0 -l5 -n3 --chunk 64
+mdadm --grow $md0 -l5 -n3
+checkgeo md0 raid5 3
 dotest 2
 
 mdadm $md0 --add $dev3 $dev4
 mdadm --grow $md0 -n4 --chunk 32
+checkgeo md0 raid5 4 $[32*1024]
 dotest 3
 
 mdadm -G $md0 -l6 --backup-file $bu
+checkgeo md0 raid6 5 $[32*1024]
 dotest 3
 
-mdadm -G /dev/md0 --array-size 39936
+mdadm -G /dev/md0 --array-size 37888
 mdadm -G $md0 -n4 --backup-file $bu
 checkgeo md0 raid6 4 $[32*1024]
 dotest 2
@@ -67,14 +69,11 @@ mdadm -G $md0 -l5 --backup-file $bu
 checkgeo md0 raid5 3 $[32*1024]
 dotest 2
 
-mdadm -G /dev/md0 --array-size 19968
+mdadm -G /dev/md0 --array-size 18944
 mdadm -G $md0 -n2 --backup-file $bu
 checkgeo md0 raid5 2 $[32*1024]
 dotest 1
 
-mdadm -G --level=1 $md0
-dotest 1
-
 # now repeat that last few steps only with a degraded array.
 mdadm -S $md0
 mdadm -CR $md0 -l6 -n5 $dev0 $dev1 $dev2 $dev3 $dev4
@@ -83,7 +82,7 @@ dotest 3
 
 mdadm $md0 --fail $dev0
 
-mdadm -G /dev/md0 --array-size 37888
+mdadm -G /dev/md0 --array-size 35840
 mdadm -G $md0 -n4 --backup-file $bu
 dotest 2
 checkgeo md0 raid6 4 $[512*1024]
@@ -103,12 +102,10 @@ dotest 2
 mdadm -G $md0 -l5 --backup-file $bu
 dotest 2
 
-mdadm -G /dev/md0 --array-size 18944
+mdadm -G /dev/md0 --array-size 17920
 mdadm -G $md0 -n2 --backup-file $bu
 dotest 1
 checkgeo md0 raid5 2 $[512*1024]
 mdadm $md0 --fail $dev2
 
-mdadm -G --level=1 $md0
-dotest 1
-checkgeo md0 raid1 2
+mdadm -S $md0
diff --git a/tests/07changelevels.broken b/tests/07changelevels.broken
deleted file mode 100644
index 9b930d93..00000000
--- a/tests/07changelevels.broken
+++ /dev/null
@@ -1,9 +0,0 @@
-always fails
-
-Fails with errors:
-
-    mdadm: /dev/loop0 is smaller than given size. 18976K < 19968K + metadata
-    mdadm: /dev/loop1 is smaller than given size. 18976K < 19968K + metadata
-    mdadm: /dev/loop2 is smaller than given size. 18976K < 19968K + metadata
-
-    ERROR: /dev/md0 isn't a block device.
diff --git a/tests/func.sh b/tests/func.sh
index e7ccc4fc..567d91d9 100644
--- a/tests/func.sh
+++ b/tests/func.sh
@@ -362,6 +362,10 @@ check() {
 		do
 			sleep 0.5
 		done
+		while ps auxf | grep "mdadm --grow --continue" | grep -v grep
+		do
+			sleep 1
+		done
 		echo $min > /proc/sys/dev/raid/speed_limit_min
 		echo $max > /proc/sys/dev/raid/speed_limit_max
 	;;