/* * Copyright 2018-2021 The OpenSSL Project Authors. All Rights Reserved. * * Licensed under the Apache License 2.0 (the "License"). You may not use * this file except in compliance with the License. You can obtain a copy * in the file LICENSE in the source distribution or at * https://www.openssl.org/source/license.html */ #ifndef OSSL_APPS_OPT_H #define OSSL_APPS_OPT_H #include #include #include #include /* * Common verification options. */ # define OPT_V_ENUM \ OPT_V__FIRST=2000, \ OPT_V_POLICY, OPT_V_PURPOSE, OPT_V_VERIFY_NAME, OPT_V_VERIFY_DEPTH, \ OPT_V_ATTIME, OPT_V_VERIFY_HOSTNAME, OPT_V_VERIFY_EMAIL, \ OPT_V_VERIFY_IP, OPT_V_IGNORE_CRITICAL, OPT_V_ISSUER_CHECKS, \ OPT_V_CRL_CHECK, OPT_V_CRL_CHECK_ALL, OPT_V_POLICY_CHECK, \ OPT_V_EXPLICIT_POLICY, OPT_V_INHIBIT_ANY, OPT_V_INHIBIT_MAP, \ OPT_V_X509_STRICT, OPT_V_EXTENDED_CRL, OPT_V_USE_DELTAS, \ OPT_V_POLICY_PRINT, OPT_V_CHECK_SS_SIG, OPT_V_TRUSTED_FIRST, \ OPT_V_SUITEB_128_ONLY, OPT_V_SUITEB_128, OPT_V_SUITEB_192, \ OPT_V_PARTIAL_CHAIN, OPT_V_NO_ALT_CHAINS, OPT_V_NO_CHECK_TIME, \ OPT_V_VERIFY_AUTH_LEVEL, OPT_V_ALLOW_PROXY_CERTS, \ OPT_V__LAST # define OPT_V_OPTIONS \ OPT_SECTION("Validation"), \ { "policy", OPT_V_POLICY, 's', "adds policy to the acceptable policy set"}, \ { "purpose", OPT_V_PURPOSE, 's', \ "certificate chain purpose"}, \ { "verify_name", OPT_V_VERIFY_NAME, 's', "verification policy name"}, \ { "verify_depth", OPT_V_VERIFY_DEPTH, 'n', \ "chain depth limit" }, \ { "auth_level", OPT_V_VERIFY_AUTH_LEVEL, 'n', \ "chain authentication security level" }, \ { "attime", OPT_V_ATTIME, 'M', "verification epoch time" }, \ { "verify_hostname", OPT_V_VERIFY_HOSTNAME, 's', \ "expected peer hostname" }, \ { "verify_email", OPT_V_VERIFY_EMAIL, 's', \ "expected peer email" }, \ { "verify_ip", OPT_V_VERIFY_IP, 's', \ "expected peer IP address" }, \ { "ignore_critical", OPT_V_IGNORE_CRITICAL, '-', \ "permit unhandled critical extensions"}, \ { "issuer_checks", OPT_V_ISSUER_CHECKS, '-', "(deprecated)"}, \ { "crl_check", OPT_V_CRL_CHECK, '-', "check leaf certificate revocation" }, \ { "crl_check_all", OPT_V_CRL_CHECK_ALL, '-', "check full chain revocation" }, \ { "policy_check", OPT_V_POLICY_CHECK, '-', "perform rfc5280 policy checks"}, \ { "explicit_policy", OPT_V_EXPLICIT_POLICY, '-', \ "set policy variable require-explicit-policy"}, \ { "inhibit_any", OPT_V_INHIBIT_ANY, '-', \ "set policy variable inhibit-any-policy"}, \ { "inhibit_map", OPT_V_INHIBIT_MAP, '-', \ "set policy variable inhibit-policy-mapping"}, \ { "x509_strict", OPT_V_X509_STRICT, '-', \ "disable certificate compatibility work-arounds"}, \ { "extended_crl", OPT_V_EXTENDED_CRL, '-', \ "enable extended CRL features"}, \ { "use_deltas", OPT_V_USE_DELTAS, '-', \ "use delta CRLs"}, \ { "policy_print", OPT_V_POLICY_PRINT, '-', \ "print policy processing diagnostics"}, \ { "check_ss_sig", OPT_V_CHECK_SS_SIG, '-', \ "check root CA self-signatures"}, \ { "trusted_first", OPT_V_TRUSTED_FIRST, '-', \ "search trust store first (default)" }, \ { "suiteB_128_only", OPT_V_SUITEB_128_ONLY, '-', "Suite B 128-bit-only mode"}, \ { "suiteB_128", OPT_V_SUITEB_128, '-', \ "Suite B 128-bit mode allowing 192-bit algorithms"}, \ { "suiteB_192", OPT_V_SUITEB_192, '-', "Suite B 192-bit-only mode" }, \ { "partial_chain", OPT_V_PARTIAL_CHAIN, '-', \ "accept chains anchored by intermediate trust-store CAs"}, \ { "no_alt_chains", OPT_V_NO_ALT_CHAINS, '-', "(deprecated)" }, \ { "no_check_time", OPT_V_NO_CHECK_TIME, '-', "ignore certificate validity time" }, \ { "allow_proxy_certs", OPT_V_ALLOW_PROXY_CERTS, '-', "allow the use of proxy certificates" } # define OPT_V_CASES \ OPT_V__FIRST: case OPT_V__LAST: break; \ case OPT_V_POLICY: \ case OPT_V_PURPOSE: \ case OPT_V_VERIFY_NAME: \ case OPT_V_VERIFY_DEPTH: \ case OPT_V_VERIFY_AUTH_LEVEL: \ case OPT_V_ATTIME: \ case OPT_V_VERIFY_HOSTNAME: \ case OPT_V_VERIFY_EMAIL: \ case OPT_V_VERIFY_IP: \ case OPT_V_IGNORE_CRITICAL: \ case OPT_V_ISSUER_CHECKS: \ case OPT_V_CRL_CHECK: \ case OPT_V_CRL_CHECK_ALL: \ case OPT_V_POLICY_CHECK: \ case OPT_V_EXPLICIT_POLICY: \ case OPT_V_INHIBIT_ANY: \ case OPT_V_INHIBIT_MAP: \ case OPT_V_X509_STRICT: \ case OPT_V_EXTENDED_CRL: \ case OPT_V_USE_DELTAS: \ case OPT_V_POLICY_PRINT: \ case OPT_V_CHECK_SS_SIG: \ case OPT_V_TRUSTED_FIRST: \ case OPT_V_SUITEB_128_ONLY: \ case OPT_V_SUITEB_128: \ case OPT_V_SUITEB_192: \ case OPT_V_PARTIAL_CHAIN: \ case OPT_V_NO_ALT_CHAINS: \ case OPT_V_NO_CHECK_TIME: \ case OPT_V_ALLOW_PROXY_CERTS /* * Common "extended validation" options. */ # define OPT_X_ENUM \ OPT_X__FIRST=1000, \ OPT_X_KEY, OPT_X_CERT, OPT_X_CHAIN, OPT_X_CHAIN_BUILD, \ OPT_X_CERTFORM, OPT_X_KEYFORM, \ OPT_X__LAST # define OPT_X_OPTIONS \ OPT_SECTION("Extended certificate"), \ { "xkey", OPT_X_KEY, '<', "key for Extended certificates"}, \ { "xcert", OPT_X_CERT, '<', "cert for Extended certificates"}, \ { "xchain", OPT_X_CHAIN, '<', "chain for Extended certificates"}, \ { "xchain_build", OPT_X_CHAIN_BUILD, '-', \ "build certificate chain for the extended certificates"}, \ { "xcertform", OPT_X_CERTFORM, 'F', \ "format of Extended certificate (PEM/DER/P12); has no effect" }, \ { "xkeyform", OPT_X_KEYFORM, 'F', \ "format of Extended certificate's key (DER/PEM/P12); has no effect"} # define OPT_X_CASES \ OPT_X__FIRST: case OPT_X__LAST: break; \ case OPT_X_KEY: \ case OPT_X_CERT: \ case OPT_X_CHAIN: \ case OPT_X_CHAIN_BUILD: \ case OPT_X_CERTFORM: \ case OPT_X_KEYFORM /* * Common SSL options. * Any changes here must be coordinated with ../ssl/ssl_conf.c */ # define OPT_S_ENUM \ OPT_S__FIRST=3000, \ OPT_S_NOSSL3, OPT_S_NOTLS1, OPT_S_NOTLS1_1, OPT_S_NOTLS1_2, \ OPT_S_NOTLS1_3, OPT_S_BUGS, OPT_S_NO_COMP, OPT_S_NOTICKET, \ OPT_S_SERVERPREF, OPT_S_LEGACYRENEG, OPT_S_LEGACYCONN, \ OPT_S_ONRESUMP, OPT_S_NOLEGACYCONN, OPT_S_ALLOW_NO_DHE_KEX, \ OPT_S_PRIORITIZE_CHACHA, \ OPT_S_STRICT, OPT_S_SIGALGS, OPT_S_CLIENTSIGALGS, OPT_S_GROUPS, \ OPT_S_CURVES, OPT_S_NAMEDCURVE, OPT_S_CIPHER, OPT_S_CIPHERSUITES, \ OPT_S_RECORD_PADDING, OPT_S_DEBUGBROKE, OPT_S_COMP, \ OPT_S_MINPROTO, OPT_S_MAXPROTO, \ OPT_S_NO_RENEGOTIATION, OPT_S_NO_MIDDLEBOX, OPT_S__LAST # define OPT_S_OPTIONS \ OPT_SECTION("TLS/SSL"), \ {"no_ssl3", OPT_S_NOSSL3, '-',"Just disable SSLv3" }, \ {"no_tls1", OPT_S_NOTLS1, '-', "Just disable TLSv1"}, \ {"no_tls1_1", OPT_S_NOTLS1_1, '-', "Just disable TLSv1.1" }, \ {"no_tls1_2", OPT_S_NOTLS1_2, '-', "Just disable TLSv1.2"}, \ {"no_tls1_3", OPT_S_NOTLS1_3, '-', "Just disable TLSv1.3"}, \ {"bugs", OPT_S_BUGS, '-', "Turn on SSL bug compatibility"}, \ {"no_comp", OPT_S_NO_COMP, '-', "Disable SSL/TLS compression (default)" }, \ {"comp", OPT_S_COMP, '-', "Use SSL/TLS-level compression" }, \ {"no_ticket", OPT_S_NOTICKET, '-', \ "Disable use of TLS session tickets"}, \ {"serverpref", OPT_S_SERVERPREF, '-', "Use server's cipher preferences"}, \ {"legacy_renegotiation", OPT_S_LEGACYRENEG, '-', \ "Enable use of legacy renegotiation (dangerous)"}, \ {"no_renegotiation", OPT_S_NO_RENEGOTIATION, '-', \ "Disable all renegotiation."}, \ {"legacy_server_connect", OPT_S_LEGACYCONN, '-', \ "Allow initial connection to servers that don't support RI"}, \ {"no_resumption_on_reneg", OPT_S_ONRESUMP, '-', \ "Disallow session resumption on renegotiation"}, \ {"no_legacy_server_connect", OPT_S_NOLEGACYCONN, '-', \ "Disallow initial connection to servers that don't support RI"}, \ {"allow_no_dhe_kex", OPT_S_ALLOW_NO_DHE_KEX, '-', \ "In TLSv1.3 allow non-(ec)dhe based key exchange on resumption"}, \ {"prioritize_chacha", OPT_S_PRIORITIZE_CHACHA, '-', \ "Prioritize ChaCha ciphers when preferred by clients"}, \ {"strict", OPT_S_STRICT, '-', \ "Enforce strict certificate checks as per TLS standard"}, \ {"sigalgs", OPT_S_SIGALGS, 's', \ "Signature algorithms to support (colon-separated list)" }, \ {"client_sigalgs", OPT_S_CLIENTSIGALGS, 's', \ "Signature algorithms to support for client certificate" \ " authentication (colon-separated list)" }, \ {"groups", OPT_S_GROUPS, 's', \ "Groups to advertise (colon-separated list)" }, \ {"curves", OPT_S_CURVES, 's', \ "Groups to advertise (colon-separated list)" }, \ {"named_curve", OPT_S_NAMEDCURVE, 's', \ "Elliptic curve used for ECDHE (server-side only)" }, \ {"cipher", OPT_S_CIPHER, 's', "Specify TLSv1.2 and below cipher list to be used"}, \ {"ciphersuites", OPT_S_CIPHERSUITES, 's', "Specify TLSv1.3 ciphersuites to be used"}, \ {"min_protocol", OPT_S_MINPROTO, 's', "Specify the minimum protocol version to be used"}, \ {"max_protocol", OPT_S_MAXPROTO, 's', "Specify the maximum protocol version to be used"}, \ {"record_padding", OPT_S_RECORD_PADDING, 's', \ "Block size to pad TLS 1.3 records to."}, \ {"debug_broken_protocol", OPT_S_DEBUGBROKE, '-', \ "Perform all sorts of protocol violations for testing purposes"}, \ {"no_middlebox", OPT_S_NO_MIDDLEBOX, '-', \ "Disable TLSv1.3 middlebox compat mode" } # define OPT_S_CASES \ OPT_S__FIRST: case OPT_S__LAST: break; \ case OPT_S_NOSSL3: \ case OPT_S_NOTLS1: \ case OPT_S_NOTLS1_1: \ case OPT_S_NOTLS1_2: \ case OPT_S_NOTLS1_3: \ case OPT_S_BUGS: \ case OPT_S_NO_COMP: \ case OPT_S_COMP: \ case OPT_S_NOTICKET: \ case OPT_S_SERVERPREF: \ case OPT_S_LEGACYRENEG: \ case OPT_S_LEGACYCONN: \ case OPT_S_ONRESUMP: \ case OPT_S_NOLEGACYCONN: \ case OPT_S_ALLOW_NO_DHE_KEX: \ case OPT_S_PRIORITIZE_CHACHA: \ case OPT_S_STRICT: \ case OPT_S_SIGALGS: \ case OPT_S_CLIENTSIGALGS: \ case OPT_S_GROUPS: \ case OPT_S_CURVES: \ case OPT_S_NAMEDCURVE: \ case OPT_S_CIPHER: \ case OPT_S_CIPHERSUITES: \ case OPT_S_RECORD_PADDING: \ case OPT_S_NO_RENEGOTIATION: \ case OPT_S_MINPROTO: \ case OPT_S_MAXPROTO: \ case OPT_S_DEBUGBROKE: \ case OPT_S_NO_MIDDLEBOX #define IS_NO_PROT_FLAG(o) \ (o == OPT_S_NOSSL3 || o == OPT_S_NOTLS1 || o == OPT_S_NOTLS1_1 \ || o == OPT_S_NOTLS1_2 || o == OPT_S_NOTLS1_3) /* * Random state options. */ # define OPT_R_ENUM \ OPT_R__FIRST=1500, OPT_R_RAND, OPT_R_WRITERAND, OPT_R__LAST # define OPT_R_OPTIONS \ OPT_SECTION("Random state"), \ {"rand", OPT_R_RAND, 's', "Load the given file(s) into the random number generator"}, \ {"writerand", OPT_R_WRITERAND, '>', "Write random data to the specified file"} # define OPT_R_CASES \ OPT_R__FIRST: case OPT_R__LAST: break; \ case OPT_R_RAND: case OPT_R_WRITERAND /* * Provider options. */ # define OPT_PROV_ENUM \ OPT_PROV__FIRST=1600, \ OPT_PROV_PROVIDER, OPT_PROV_PROVIDER_PATH, OPT_PROV_PROPQUERY, \ OPT_PROV__LAST # define OPT_CONFIG_OPTION \ { "config", OPT_CONFIG, '<', "Load a configuration file (this may load modules)" } # define OPT_PROV_OPTIONS \ OPT_SECTION("Provider"), \ { "provider-path", OPT_PROV_PROVIDER_PATH, 's', "Provider load path (must be before 'provider' argument if required)" }, \ { "provider", OPT_PROV_PROVIDER, 's', "Provider to load (can be specified multiple times)" }, \ { "propquery", OPT_PROV_PROPQUERY, 's', "Property query used when fetching algorithms" } # define OPT_PROV_CASES \ OPT_PROV__FIRST: case OPT_PROV__LAST: break; \ case OPT_PROV_PROVIDER: \ case OPT_PROV_PROVIDER_PATH: \ case OPT_PROV_PROPQUERY /* * Option parsing. */ extern const char OPT_HELP_STR[]; extern const char OPT_MORE_STR[]; extern const char OPT_SECTION_STR[]; extern const char OPT_PARAM_STR[]; typedef struct options_st { const char *name; int retval; /* * value type: - no value (also the value zero), n number, p positive * number, u unsigned, l long, s string, < input file, > output file, * f any format, F der/pem format, E der/pem/engine format identifier. * l, n and u include zero; p does not. */ int valtype; const char *helpstr; } OPTIONS; /* * A string/int pairing; widely use for option value lookup, hence the * name OPT_PAIR. But that name is misleading in s_cb.c, so we also use * the "generic" name STRINT_PAIR. */ typedef struct string_int_pair_st { const char *name; int retval; } OPT_PAIR, STRINT_PAIR; /* Flags to pass into opt_format; see FORMAT_xxx, below. */ # define OPT_FMT_PEMDER (1L << 1) # define OPT_FMT_PKCS12 (1L << 2) # define OPT_FMT_SMIME (1L << 3) # define OPT_FMT_ENGINE (1L << 4) # define OPT_FMT_MSBLOB (1L << 5) /* (1L << 6) was OPT_FMT_NETSCAPE, but wasn't used */ # define OPT_FMT_NSS (1L << 7) # define OPT_FMT_TEXT (1L << 8) # define OPT_FMT_HTTP (1L << 9) # define OPT_FMT_PVK (1L << 10) # define OPT_FMT_PDE (OPT_FMT_PEMDER | OPT_FMT_ENGINE) # define OPT_FMT_PDS (OPT_FMT_PEMDER | OPT_FMT_SMIME) # define OPT_FMT_ANY ( \ OPT_FMT_PEMDER | OPT_FMT_PKCS12 | OPT_FMT_SMIME | \ OPT_FMT_ENGINE | OPT_FMT_MSBLOB | OPT_FMT_NSS | \ OPT_FMT_TEXT | OPT_FMT_HTTP | OPT_FMT_PVK) /* Divide options into sections when displaying usage */ #define OPT_SECTION(sec) { OPT_SECTION_STR, 1, '-', sec " options:\n" } #define OPT_PARAMETERS() { OPT_PARAM_STR, 1, '-', "Parameters:\n" } const char *opt_path_end(const char *filename); char *opt_progname(const char *argv0); char *opt_appname(const char *arg0); char *opt_getprog(void); char *opt_init(int ac, char **av, const OPTIONS * o); int opt_next(void); void opt_begin(void); int opt_format(const char *s, unsigned long flags, int *result); const char *format2str(int format); int opt_int(const char *arg, int *result); int opt_ulong(const char *arg, unsigned long *result); int opt_long(const char *arg, long *result); #if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L && \ defined(INTMAX_MAX) && defined(UINTMAX_MAX) && \ !defined(OPENSSL_NO_INTTYPES_H) int opt_imax(const char *arg, intmax_t *result); int opt_umax(const char *arg, uintmax_t *result); #else # define opt_imax opt_long # define opt_umax opt_ulong # define intmax_t long # define uintmax_t unsigned long #endif int opt_pair(const char *arg, const OPT_PAIR * pairs, int *result); int opt_string(const char *name, const char **options); int opt_cipher(const char *name, EVP_CIPHER **cipherp); int opt_md(const char *name, EVP_MD **mdp); char *opt_arg(void); char *opt_flag(void); char *opt_unknown(void); char **opt_rest(void); int opt_num_rest(void); int opt_verify(int i, X509_VERIFY_PARAM *vpm); int opt_rand(int i); int opt_provider(int i); void opt_help(const OPTIONS * list); void opt_print(const OPTIONS * opt, int doingparams, int width); int opt_format_error(const char *s, unsigned long flags); void print_format_error(int format, unsigned long flags); int opt_isdir(const char *name); int opt_printf_stderr(const char *fmt, ...); #endif /* OSSL_APPS_OPT_H */