Use https for man7.org

8 files changed, 23 insertions, 23 deletions

diff --git a/docs/BLOCK_DEVICE_LOCKING.md b/docs/BLOCK_DEVICE_LOCKING.md
index 40fc61c671..61beff0ff2 100644
--- a/docs/BLOCK_DEVICE_LOCKING.md
+++ b/docs/BLOCK_DEVICE_LOCKING.md
@@ -8,7 +8,7 @@ SPDX-License-Identifier: LGPL-2.1-or-later
 # Locking Block Device Access
 
 *TL;DR: Use BSD file locks
-[(`flock(2)`)](http://man7.org/linux/man-pages/man2/flock.2.html) on block
+[(`flock(2)`)](https://man7.org/linux/man-pages/man2/flock.2.html) on block
 device nodes to synchronize access for partitioning and file system formatting
 tools.*
 
@@ -22,7 +22,7 @@ Applications manipulating a block device can temporarily stop `systemd-udevd`
 from processing rules on it — and thus bar it from probing the device — by
 taking a BSD file lock on the block device node. Specifically, whenever
 `systemd-udevd` starts processing a block device it takes a `LOCK_SH|LOCK_NB`
-lock using [`flock(2)`](http://man7.org/linux/man-pages/man2/flock.2.html) on
+lock using [`flock(2)`](https://man7.org/linux/man-pages/man2/flock.2.html) on
 the main block device (i.e. never on any partition block device, but on the
 device the partition belongs to). If this lock cannot be taken (i.e. `flock()`
 returns `EAGAIN`), it refrains from processing the device. If it manages to take
diff --git a/docs/BOOT_LOADER_SPECIFICATION.md b/docs/BOOT_LOADER_SPECIFICATION.md
index 6e8a3316a7..fe3903be7b 100644
--- a/docs/BOOT_LOADER_SPECIFICATION.md
+++ b/docs/BOOT_LOADER_SPECIFICATION.md
@@ -308,7 +308,7 @@ does not exist, no assumptions should be made.
 A unified kernel image is a single EFI PE executable combining an EFI stub
 loader, a kernel image, an initramfs image, and the kernel command line. See
 the description of the `--uefi` option in
-[dracut(8)](http://man7.org/linux/man-pages/man8/dracut.8.html). Such unified
+[dracut(8)](https://man7.org/linux/man-pages/man8/dracut.8.html). Such unified
 images are installed in the`$BOOT/EFI/Linux/` and `$XBOOTLDR/EFI/Linux/`
 directories and must have the extension `.efi`.
 Support for images of this type is of course specific to systems with EFI
diff --git a/docs/CONVERTING_TO_HOMED.md b/docs/CONVERTING_TO_HOMED.md
index 591b9d8c45..80482a20e5 100644
--- a/docs/CONVERTING_TO_HOMED.md
+++ b/docs/CONVERTING_TO_HOMED.md
@@ -56,8 +56,8 @@ Here's the step-by-step guide:
 
    This will tell you the `/etc/passwd` and `/etc/shadow` entries for your
    user. For details about the fields, see the respective man pages
-   [passwd(5)](http://man7.org/linux/man-pages/man5/passwd.5.html) and
-   [shadow(5)](http://man7.org/linux/man-pages/man5/shadow.5.html).
+   [passwd(5)](https://man7.org/linux/man-pages/man5/passwd.5.html) and
+   [shadow(5)](https://man7.org/linux/man-pages/man5/shadow.5.html).
 
    The fourth field in the `getent passwd foobar` output tells you the GID of
    your user's main group. Depending on your distribution it's a group private
diff --git a/docs/PASSWORD_AGENTS.md b/docs/PASSWORD_AGENTS.md
index ed204911bc..29bd949077 100644
--- a/docs/PASSWORD_AGENTS.md
+++ b/docs/PASSWORD_AGENTS.md
@@ -12,7 +12,7 @@ systemd 12 and newer support lightweight password agents which can be used to qu
 * A Plymouth agent used for querying passwords during boot-up
 * A console agent used in similar situations if Plymouth is not available
 * A GNOME agent which can be run as part of the normal user session which pops up a notification message and icon which when clicked receives the passphrase from the user. This is useful and necessary in case an encrypted system hard-disk is plugged in when the machine is already up.
-* A [`wall(1)`](http://man7.org/linux/man-pages/man1/wall.1.html) agent which sends wall messages as soon as a password shall be entered.
+* A [`wall(1)`](https://man7.org/linux/man-pages/man1/wall.1.html) agent which sends wall messages as soon as a password shall be entered.
 * A simple tty agent which is built into "`systemctl start`" (and similar commands) and asks passwords to the user during manual startup of a service
 * A simple tty agent which can be run manually to respond to all queued passwords
 
diff --git a/docs/RANDOM_SEEDS.md b/docs/RANDOM_SEEDS.md
index b6b900acdb..9ac7d00b2e 100644
--- a/docs/RANDOM_SEEDS.md
+++ b/docs/RANDOM_SEEDS.md
@@ -25,7 +25,7 @@ for high-quality random numbers cannot be fulfilled.
 The Linux kernel provides three relevant userspace APIs to request random data
 from the kernel's entropy pool:
 
-* The [`getrandom()`](http://man7.org/linux/man-pages/man2/getrandom.2.html)
+* The [`getrandom()`](https://man7.org/linux/man-pages/man2/getrandom.2.html)
   system call with its `flags` parameter set to 0. If invoked the calling
   program will synchronously block until the random pool is fully initialized
   and the requested bytes can be provided.
@@ -35,7 +35,7 @@ from the kernel's entropy pool:
   pool is not initialized yet.
 
 * Reading from the
-  [`/dev/urandom`](http://man7.org/linux/man-pages/man4/urandom.4.html)
+  [`/dev/urandom`](https://man7.org/linux/man-pages/man4/urandom.4.html)
   pseudo-device will always return random bytes immediately, even if the pool
   is not initialized. The provided random bytes will be of low quality in this
   case however. Moreover the kernel will log about all programs using this
@@ -294,7 +294,7 @@ This primarily leaves two kind of systems in the cold:
    do use it in many cases, but not in all. Please read the above again!
 
 2. *Why don't you use
-   [getentropy()](http://man7.org/linux/man-pages/man3/getentropy.3.html)? That's
+   [getentropy()](https://man7.org/linux/man-pages/man3/getentropy.3.html)? That's
    all you need!*
 
    Same story. That call is just a different name for `getrandom()` with
@@ -303,7 +303,7 @@ This primarily leaves two kind of systems in the cold:
    are trying to address here.
 
 3. *Why don't you generate your UUIDs with
-   [`uuidd`](http://man7.org/linux/man-pages/man8/uuidd.8.html)? That's all you
+   [`uuidd`](https://man7.org/linux/man-pages/man8/uuidd.8.html)? That's all you
    need!*
 
    First of all, that's a system service, i.e. something that runs as "payload"
diff --git a/docs/TEMPORARY_DIRECTORIES.md b/docs/TEMPORARY_DIRECTORIES.md
index c703651791..4e815ed4d2 100644
--- a/docs/TEMPORARY_DIRECTORIES.md
+++ b/docs/TEMPORARY_DIRECTORIES.md
@@ -44,15 +44,15 @@ installation during runtime is permitted.)
 To protect yourself against these kinds of attacks Linux provides a couple of
 APIs that help you avoiding guessable names. Specifically:
 
-1. Use [`mkstemp()`](http://man7.org/linux/man-pages/man3/mkstemp.3.html)
+1. Use [`mkstemp()`](https://man7.org/linux/man-pages/man3/mkstemp.3.html)
    (POSIX), `mkostemp()` (glibc),
-   [`mkdtemp()`](http://man7.org/linux/man-pages/man3/mkdtemp.3.html) (POSIX),
-   [`tmpfile()`](http://man7.org/linux/man-pages/man3/tmpfile.3.html) (C89)
+   [`mkdtemp()`](https://man7.org/linux/man-pages/man3/mkdtemp.3.html) (POSIX),
+   [`tmpfile()`](https://man7.org/linux/man-pages/man3/tmpfile.3.html) (C89)
 
-2. Use [`open()`](http://man7.org/linux/man-pages/man2/open.2.html) with
+2. Use [`open()`](https://man7.org/linux/man-pages/man2/open.2.html) with
    `O_TMPFILE` (Linux)
 
-3. [`memfd_create()`](http://man7.org/linux/man-pages/man2/memfd_create.2.html)
+3. [`memfd_create()`](https://man7.org/linux/man-pages/man2/memfd_create.2.html)
    (Linux; this doesn't bother with `/tmp/` or `/var/tmp/` at all, but uses the
    same RAM/swap backing as `tmpfs` uses, hence is very similar to `/tmp/`
    semantics.)
@@ -113,7 +113,7 @@ strategies to avoid these issues:
 
 3. 🥇 Operate below a sub-directory of `/tmp/` and `/var/tmp/` you created, and
    take a BSD file lock ([`flock(dir_fd,
-   LOCK_SH)`](http://man7.org/linux/man-pages/man2/flock.2.html)) on that
+   LOCK_SH)`](https://man7.org/linux/man-pages/man2/flock.2.html)) on that
    sub-directory. This is particularly interesting when operating on more than
    a single file, or on file nodes that are not plain regular files, for
    example when extracting a tarball to a temporary directory. The ageing
@@ -126,7 +126,7 @@ strategies to avoid these issues:
    this when decompressing tarballs that contain files with old
    modification/access times, as extracted files are otherwise immediately
    candidates for deletion by the ageing algorithm. The
-   [`flock`](http://man7.org/linux/man-pages/man1/flock.1.html) tool of the
+   [`flock`](https://man7.org/linux/man-pages/man1/flock.1.html) tool of the
    `util-linux` packages makes this concept available to shell scripts. Note
    that `systemd-tmpfiles` only checks for BSD file locks on directories, locks
    on other types of file nodes (including regular files) are not considered.
@@ -217,7 +217,7 @@ packages instead use `/dev/shm/` for temporary files during early boot; this is
 not advisable however, as it offers no benefits over a private directory in
 `/run/` as both are backed by the same concept: `tmpfs`. The directory
 `/dev/shm/` exists to back POSIX shared memory (see
-[`shm_open()`](http://man7.org/linux/man-pages/man3/shm_open.3.html) and
+[`shm_open()`](https://man7.org/linux/man-pages/man3/shm_open.3.html) and
 related calls), and not as a place for temporary files. `/dev/shm` is
 problematic as it is world-writable and there's no automatic clean-up logic in
 place.)
diff --git a/docs/USER_GROUP_API.md b/docs/USER_GROUP_API.md
index 3078dfd8ec..30063135b6 100644
--- a/docs/USER_GROUP_API.md
+++ b/docs/USER_GROUP_API.md
@@ -11,7 +11,7 @@ JSON User/Group Records (as described in the [JSON User Records](USER_RECORD.md)
 and [JSON Group Records](GROUP_RECORD.md) documents) that are defined on the
 local system may be queried with a [Varlink](https://varlink.org/) API. This
 API takes both the role of what
-[`getpwnam(3)`](http://man7.org/linux/man-pages/man3/getpwnam.3.html) and
+[`getpwnam(3)`](https://man7.org/linux/man-pages/man3/getpwnam.3.html) and
 related calls are for `struct passwd`, as well as the interfaces modules
 implementing the [glibc Name Service Switch
 (NSS)](https://www.gnu.org/software/libc/manual/html_node/Name-Service-Switch.html)
diff --git a/docs/USER_RECORD.md b/docs/USER_RECORD.md
index 5308102944..e6d2b5d99f 100644
--- a/docs/USER_RECORD.md
+++ b/docs/USER_RECORD.md
@@ -297,7 +297,7 @@ for all login sessions of the user.
 
 `environment` → An array of strings, each containing an environment variable
 and its value to set for the user's login session, in a format compatible with
-[`putenv()`](http://man7.org/linux/man-pages/man3/putenv.3.html). Any
+[`putenv()`](https://man7.org/linux/man-pages/man3/putenv.3.html). Any
 environment variable listed here is automatically set by
 [`pam_systemd`](https://www.freedesktop.org/software/systemd/man/pam_systemd.html)
 for all login sessions of the user.
@@ -320,7 +320,7 @@ variable, for example: `de_DE.UTF8`.
 [`pam_systemd`](https://www.freedesktop.org/software/systemd/man/pam_systemd.html)
 will automatically initialize the login process' nice level to this value with,
 which is then inherited by all the user's processes, see
-[`setpriority()`](http://man7.org/linux/man-pages/man2/setpriority.2.html) for
+[`setpriority()`](https://man7.org/linux/man-pages/man2/setpriority.2.html) for
 more information.
 
 `resourceLimits` → An object, where each key refers to a Linux resource limit
@@ -329,7 +329,7 @@ two keys `cur` and `max` for the soft and hard resource limit. When logging in
 [`pam_systemd`](https://www.freedesktop.org/software/systemd/man/pam_systemd.html)
 will automatically initialize the login process' resource limits to these
 values, which is then inherited by all the user's processes, see
-[`setrlimit()`](http://man7.org/linux/man-pages/man2/setrlimit.2.html) for more
+[`setrlimit()`](https://man7.org/linux/man-pages/man2/setrlimit.2.html) for more
 information.
 
 `locked` → A boolean value. If true, the user account is locked, the user may
@@ -625,7 +625,7 @@ user to choose.
 
 `hashedPassword` → An array of strings, each containing a hashed UNIX password
 string, in the format
-[`crypt(3)`](http://man7.org/linux/man-pages/man3/crypt.3.html) generates. This
+[`crypt(3)`](https://man7.org/linux/man-pages/man3/crypt.3.html) generates. This
 corresponds with `sp_pwdp` field of `struct spwd` (and in a way the `pw_passwd`
 field of `struct passwd`).