diff options
Diffstat (limited to 'docs/ENVIRONMENT.md')
| -rw-r--r-- | docs/ENVIRONMENT.md | 644 |
1 files changed, 644 insertions, 0 deletions
diff --git a/docs/ENVIRONMENT.md b/docs/ENVIRONMENT.md new file mode 100644 index 0000000000..eab1ce23e4 --- /dev/null +++ b/docs/ENVIRONMENT.md @@ -0,0 +1,644 @@ +--- +title: Known Environment Variables +category: Interfaces +layout: default +SPDX-License-Identifier: LGPL-2.1-or-later +--- + +# Known Environment Variables + +A number of systemd components take additional runtime parameters via +environment variables. Many of these environment variables are not supported at +the same level as command line switches and other interfaces are: we don't +document them in the man pages and we make no stability guarantees for +them. While they generally are unlikely to be dropped any time soon again, we +do not want to guarantee that they stay around for good either. + +Below is an (incomprehensive) list of the environment variables understood by +the various tools. Note that this list only covers environment variables not +documented in the proper man pages. + +All tools: + +* `$SYSTEMD_OFFLINE=[0|1]` — if set to `1`, then `systemctl` will refrain from + talking to PID 1; this has the same effect as the historical detection of + `chroot()`. Setting this variable to `0` instead has a similar effect as + `$SYSTEMD_IGNORE_CHROOT=1`; i.e. tools will try to communicate with PID 1 + even if a `chroot()` environment is detected. You almost certainly want to + set this to `1` if you maintain a package build system or similar and are + trying to use a modern container system and not plain `chroot()`. + +* `$SYSTEMD_IGNORE_CHROOT=1` — if set, don't check whether being invoked in a + `chroot()` environment. This is particularly relevant for systemctl, as it + will not alter its behaviour for `chroot()` environments if set. Normally it + refrains from talking to PID 1 in such a case; turning most operations such + as `start` into no-ops. If that's what's explicitly desired, you might + consider setting `$SYSTEMD_OFFLINE=1`. + +* `$SYSTEMD_FIRST_BOOT=0|1` — if set, assume "first boot" condition to be false + or true, instead of checking the flag file created by PID 1. + +* `$SD_EVENT_PROFILE_DELAYS=1` — if set, the sd-event event loop implementation + will print latency information at runtime. + +* `$SYSTEMD_PROC_CMDLINE` — if set, the contents are used as the kernel command + line instead of the actual one in `/proc/cmdline`. This is useful for + debugging, in order to test generators and other code against specific kernel + command lines. + +* `$SYSTEMD_OS_RELEASE` — if set, use this path instead of `/etc/os-release` or + `/usr/lib/os-release`. When operating under some root (e.g. `systemctl + --root=…`), the path is prefixed with the root. Only useful for debugging. + +* `$SYSTEMD_FSTAB` — if set, use this path instead of `/etc/fstab`. Only useful + for debugging. + +* `$SYSTEMD_SYSROOT_FSTAB` — if set, use this path instead of + `/sysroot/etc/fstab`. Only useful for debugging `systemd-fstab-generator`. + +* `$SYSTEMD_SYSFS_CHECK` — takes a boolean. If set, overrides sysfs container + detection that ignores `/dev/` entries in fstab. Only useful for debugging + `systemd-fstab-generator`. + +* `$SYSTEMD_CRYPTTAB` — if set, use this path instead of `/etc/crypttab`. Only + useful for debugging. Currently only supported by + `systemd-cryptsetup-generator`. + +* `$SYSTEMD_INTEGRITYTAB` — if set, use this path instead of + `/etc/integritytab`. Only useful for debugging. Currently only supported by + `systemd-integritysetup-generator`. + +* `$SYSTEMD_VERITYTAB` — if set, use this path instead of + `/etc/veritytab`. Only useful for debugging. Currently only supported by + `systemd-veritysetup-generator`. + +* `$SYSTEMD_EFI_OPTIONS` — if set, used instead of the string in the + `SystemdOptions` EFI variable. Analogous to `$SYSTEMD_PROC_CMDLINE`. + +* `$SYSTEMD_DEFAULT_HOSTNAME` — override the compiled-in fallback hostname + (relevant in particular for the system manager and `systemd-hostnamed`). + Must be a valid hostname (either a single label or a FQDN). + +* `$SYSTEMD_IN_INITRD` — takes a boolean. If set, overrides initrd detection. + This is useful for debugging and testing initrd-only programs in the main + system. + +* `$SYSTEMD_BUS_TIMEOUT=SECS` — specifies the maximum time to wait for method call + completion. If no time unit is specified, assumes seconds. The usual other units + are understood, too (us, ms, s, min, h, d, w, month, y). If it is not set or set + to 0, then the built-in default is used. + +* `$SYSTEMD_MEMPOOL=0` — if set, the internal memory caching logic employed by + hash tables is turned off, and libc `malloc()` is used for all allocations. + +* `$SYSTEMD_UTF8=` — takes a boolean value, and overrides whether to generate + non-ASCII special glyphs at various places (i.e. "→" instead of + "->"). Usually this is determined automatically, based on `$LC_CTYPE`, but in + scenarios where locale definitions are not installed it might make sense to + override this check explicitly. + +* `$SYSTEMD_EMOJI=0` — if set, tools such as `systemd-analyze security` will + not output graphical smiley emojis, but ASCII alternatives instead. Note that + this only controls use of Unicode emoji glyphs, and has no effect on other + Unicode glyphs. + +* `$RUNTIME_DIRECTORY` — various tools use this variable to locate the + appropriate path under `/run/`. This variable is also set by the manager when + `RuntimeDirectory=` is used, see systemd.exec(5). + +* `$SYSTEMD_CRYPT_PREFIX` — if set configures the hash method prefix to use for + UNIX `crypt()` when generating passwords. By default the system's "preferred + method" is used, but this can be overridden with this environment variable. + Takes a prefix such as `$6$` or `$y$`. (Note that this is only honoured on + systems built with libxcrypt and is ignored on systems using glibc's + original, internal `crypt()` implementation.) + +* `$SYSTEMD_SECCOMP=0` — if set, seccomp filters will not be enforced, even if + support for it is compiled in and available in the kernel. + +* `$SYSTEMD_LOG_SECCOMP=1` — if set, system calls blocked by seccomp filtering, + for example in `systemd-nspawn`, will be logged to the audit log, if the + kernel supports this. + +* `$SYSTEMD_ENABLE_LOG_CONTEXT` — if set, extra fields will always be logged to + the journal instead of only when logging in debug mode. + +* `$SYSTEMD_NETLINK_DEFAULT_TIMEOUT` — specifies the default timeout of waiting + replies for netlink messages from the kernel. Defaults to 25 seconds. + +* `$SYSTEMD_VERITY_SHARING=0` — if set, sharing dm-verity devices by + using a stable `<ROOTHASH>-verity` device mapper name will be disabled. + +* `$SYSTEMD_OPENSSL_KEY_LOADER`— when using OpenSSL to load a key via an engine + or a provider, can be used to force the usage of one or the other interface. + Set to 'engine' to force the usage of the old engine API, and to 'provider' + force the usage of the new provider API. If unset, the provider will be tried + first and the engine as a fallback if that fails. Providers are the new OpenSSL + 3 API, but there are very few if any in a production-ready state, so engines + are still needed. + +`systemctl`: + +* `$SYSTEMCTL_FORCE_BUS=1` — if set, do not connect to PID 1's private D-Bus + listener, and instead always connect through the dbus-daemon D-bus broker. + +* `$SYSTEMCTL_INSTALL_CLIENT_SIDE=1` — if set, enable or disable unit files on + the client side, instead of asking PID 1 to do this. + +* `$SYSTEMCTL_SKIP_SYSV=1` — if set, do not call SysV compatibility hooks. + +* `$SYSTEMCTL_SKIP_AUTO_KEXEC=1` — if set, do not automatically kexec instead of + reboot when a new kernel has been loaded. + +* `$SYSTEMCTL_SKIP_AUTO_SOFT_REBOOT=1` — if set, do not automatically soft-reboot + instead of reboot when a new root file system has been loaded in + `/run/nextroot/`. + +`systemd-nspawn`: + +* `$SYSTEMD_NSPAWN_UNIFIED_HIERARCHY=1` — if set, force `systemd-nspawn` into + unified cgroup hierarchy mode. + +* `$SYSTEMD_NSPAWN_API_VFS_WRITABLE=1` — if set, make `/sys/`, `/proc/sys/`, + and friends writable in the container. If set to "network", leave only + `/proc/sys/net/` writable. + +* `$SYSTEMD_NSPAWN_CONTAINER_SERVICE=…` — override the "service" name nspawn + uses to register with machined. If unset defaults to "nspawn", but with this + variable may be set to any other value. + +* `$SYSTEMD_NSPAWN_USE_CGNS=0` — if set, do not use cgroup namespacing, even if + it is available. + +* `$SYSTEMD_NSPAWN_LOCK=0` — if set, do not lock container images when running. + +* `$SYSTEMD_NSPAWN_TMPFS_TMP=0` — if set, do not overmount `/tmp/` in the + container with a tmpfs, but leave the directory from the image in place. + +* `$SYSTEMD_NSPAWN_CHECK_OS_RELEASE=0` — if set, do not fail when trying to + boot an OS tree without an os-release file (useful when trying to boot a + container with empty `/etc/` and bind-mounted `/usr/`) + +* `$SYSTEMD_SUPPRESS_SYNC=1` — if set, all disk synchronization syscalls are + blocked to the container payload (e.g. `sync()`, `fsync()`, `syncfs()`, …) + and the `O_SYNC`/`O_DSYNC` flags are made unavailable to `open()` and + friends. This is equivalent to passing `--suppress-sync=yes` on the + `systemd-nspawn` command line. + +* `$SYSTEMD_NSPAWN_NETWORK_MAC=...` — if set, allows users to set a specific MAC + address for a container, ensuring that it uses the provided value instead of + generating a random one. It is effective when used with `--network-veth`. The + expected format is six groups of two hexadecimal digits separated by colons, + e.g. `SYSTEMD_NSPAWN_NETWORK_MAC=12:34:56:78:90:AB` + +`systemd-logind`: + +* `$SYSTEMD_BYPASS_HIBERNATION_MEMORY_CHECK=1` — if set, report that + hibernation is available even if the swap devices do not provide enough room + for it. + +* `$SYSTEMD_REBOOT_TO_FIRMWARE_SETUP` — if set, overrides `systemd-logind`'s + built-in EFI logic of requesting a reboot into the firmware. Takes a boolean. + If set to false, the functionality is turned off entirely. If set to true, + instead of requesting a reboot into the firmware setup UI through EFI a file, + `/run/systemd/reboot-to-firmware-setup` is created whenever this is + requested. This file may be checked for by services run during system + shutdown in order to request the appropriate operation from the firmware in + an alternative fashion. + +* `$SYSTEMD_REBOOT_TO_BOOT_LOADER_MENU` — similar to the above, allows + overriding of `systemd-logind`'s built-in EFI logic of requesting a reboot + into the boot loader menu. Takes a boolean. If set to false, the + functionality is turned off entirely. If set to true, instead of requesting a + reboot into the boot loader menu through EFI, the file + `/run/systemd/reboot-to-boot-loader-menu` is created whenever this is + requested. The file contains the requested boot loader menu timeout in µs, + formatted in ASCII decimals, or zero in case no timeout is requested. This + file may be checked for by services run during system shutdown in order to + request the appropriate operation from the boot loader in an alternative + fashion. + +* `$SYSTEMD_REBOOT_TO_BOOT_LOADER_ENTRY` — similar to the above, allows + overriding of `systemd-logind`'s built-in EFI logic of requesting a reboot + into a specific boot loader entry. Takes a boolean. If set to false, the + functionality is turned off entirely. If set to true, instead of requesting a + reboot into a specific boot loader entry through EFI, the file + `/run/systemd/reboot-to-boot-loader-entry` is created whenever this is + requested. The file contains the requested boot loader entry identifier. This + file may be checked for by services run during system shutdown in order to + request the appropriate operation from the boot loader in an alternative + fashion. Note that by default only boot loader entries which follow the + [Boot Loader Specification](https://uapi-group.org/specifications/specs/boot_loader_specification) + and are placed in the ESP or the Extended Boot Loader partition may be + selected this way. However, if a directory `/run/boot-loader-entries/` + exists, the entries are loaded from there instead. The directory should + contain the usual directory hierarchy mandated by the Boot Loader + Specification, i.e. the entry drop-ins should be placed in + `/run/boot-loader-entries/loader/entries/*.conf`, and the files referenced by + the drop-ins (including the kernels and initrds) somewhere else below + `/run/boot-loader-entries/`. Note that all these files may be (and are + supposed to be) symlinks. `systemd-logind` will load these files on-demand, + these files can hence be updated (ideally atomically) whenever the boot + loader configuration changes. A foreign boot loader installer script should + hence synthesize drop-in snippets and symlinks for all boot entries at boot + or whenever they change if it wants to integrate with `systemd-logind`'s + APIs. + +`systemd-udevd` and sd-device library: + +* `$NET_NAMING_SCHEME=` — if set, takes a network naming scheme (i.e. one of + "v238", "v239", "v240"…, or the special value "latest") as parameter. If + specified udev's `net_id` builtin will follow the specified naming scheme + when determining stable network interface names. This may be used to revert + to naming schemes of older udev versions, in order to provide more stable + naming across updates. This environment variable takes precedence over the + kernel command line option `net.naming-scheme=`, except if the value is + prefixed with `:` in which case the kernel command line option takes + precedence, if it is specified as well. + +* `$SYSTEMD_DEVICE_VERIFY_SYSFS` — if set to "0", disables verification that + devices sysfs path are actually backed by sysfs. Relaxing this verification + is useful for testing purposes. + +* `$SYSTEMD_UDEV_EXTRA_TIMEOUT_SEC=` — Specifies an extra timespan that the + udev manager process waits for a worker process kills slow programs specified + by IMPORT{program}=, PROGRAM=, or RUN=, and finalizes the processing event. + If the worker process cannot finalize the event within the specified timespan, + the worker process is killed by the manager process. Defaults to 10 seconds, + maximum allowed is 5 hours. + +`udevadm` and `systemd-hwdb`: + +* `SYSTEMD_HWDB_UPDATE_BYPASS=` — If set to "1", execution of hwdb updates is skipped + when `udevadm hwdb --update` or `systemd-hwdb update` are invoked. This can + be useful if either of these tools are invoked unconditionally as a child + process by another tool, such as package managers running either of these + tools in a postinstall script. + +`nss-systemd`: + +* `$SYSTEMD_NSS_BYPASS_SYNTHETIC=1` — if set, `nss-systemd` won't synthesize + user/group records for the `root` and `nobody` users if they are missing from + `/etc/passwd`. + +* `$SYSTEMD_NSS_DYNAMIC_BYPASS=1` — if set, `nss-systemd` won't return + user/group records for dynamically registered service users (i.e. users + registered through `DynamicUser=1`). + +`systemd-timedated`: + +* `$SYSTEMD_TIMEDATED_NTP_SERVICES=…` — colon-separated list of unit names of + NTP client services. If set, `timedatectl set-ntp on` enables and starts the + first existing unit listed in the environment variable, and + `timedatectl set-ntp off` disables and stops all listed units. + +`systemd-sulogin-shell`: + +* `$SYSTEMD_SULOGIN_FORCE=1` — This skips asking for the root password if the + root password is not available (such as when the root account is locked). + See `sulogin(8)` for more details. + +`bootctl` and other tools that access the EFI System Partition (ESP): + +* `$SYSTEMD_RELAX_ESP_CHECKS=1` — if set, the ESP validation checks are + relaxed. Specifically, validation checks that ensure the specified ESP path + is a FAT file system are turned off, as are checks that the path is located + on a GPT partition with the correct type UUID. + +* `$SYSTEMD_ESP_PATH=…` — override the path to the EFI System Partition. This + may be used to override ESP path auto detection, and redirect any accesses to + the ESP to the specified directory. Note that unlike with `bootctl`'s + `--path=` switch only very superficial validation of the specified path is + done when this environment variable is used. + +* `$KERNEL_INSTALL_CONF_ROOT=…` — override the built in default configuration + directory /etc/kernel/ to read files like entry-token and install.conf from. + +`systemd` itself: + +* `$SYSTEMD_ACTIVATION_UNIT` — set for all NSS and PAM module invocations that + are done by the service manager on behalf of a specific unit, in child + processes that are later (after execve()) going to become unit + processes. Contains the full unit name (e.g. "foobar.service"). NSS and PAM + modules can use this information to determine in which context and on whose + behalf they are being called, which may be useful to avoid deadlocks, for + example to bypass IPC calls to the very service that is about to be + started. Note that NSS and PAM modules should be careful to only rely on this + data when invoked privileged, or possibly only when getppid() returns 1, as + setting environment variables is of course possible in any even unprivileged + contexts. + +* `$SYSTEMD_ACTIVATION_SCOPE` — closely related to `$SYSTEMD_ACTIVATION_UNIT`, + it is either set to `system` or `user` depending on whether the NSS/PAM + module is called by systemd in `--system` or `--user` mode. + +* `$SYSTEMD_SUPPORT_DEVICE`, `$SYSTEMD_SUPPORT_MOUNT`, `$SYSTEMD_SUPPORT_SWAP` - + can be set to `0` to mark respective unit type as unsupported. Generally, + having less units saves system resources so these options might be useful + for cases where we don't need to track given unit type, e.g. `--user` manager + often doesn't need to deal with device or swap units because they are + handled by the `--system` manager (PID 1). Note that setting certain unit + type as unsupported may not prevent loading some units of that type if they + are referenced by other units of another supported type. + +* `$SYSTEMD_DEFAULT_MOUNT_RATE_LIMIT_BURST` — can be set to override the mount + units burst rate limit for parsing `/proc/self/mountinfo`. On a system with + few resources but many mounts the rate limit may be hit, which will cause the + processing of mount units to stall. The burst limit may be adjusted when the + default is not appropriate for a given system. Defaults to `5`, accepts + positive integers. + +`systemd-remount-fs`: + +* `$SYSTEMD_REMOUNT_ROOT_RW=1` — if set and no entry for the root directory + exists in `/etc/fstab` (this file always takes precedence), then the root + directory is remounted writable. This is primarily used by + `systemd-gpt-auto-generator` to ensure the root partition is mounted writable + in accordance to the GPT partition flags. + +`systemd-firstboot` and `localectl`: + +* `$SYSTEMD_LIST_NON_UTF8_LOCALES=1` — if set, non-UTF-8 locales are listed among + the installed ones. By default non-UTF-8 locales are suppressed from the + selection, since we are living in the 21st century. + +`systemd-resolved`: + +* `$SYSTEMD_RESOLVED_SYNTHESIZE_HOSTNAME` — if set to "0", `systemd-resolved` + won't synthesize system hostname on both regular and reverse lookups. + +`systemd-sysext`: + +* `$SYSTEMD_SYSEXT_HIERARCHIES` — this variable may be used to override which + hierarchies are managed by `systemd-sysext`. By default only `/usr/` and + `/opt/` are managed, and directories may be added or removed to that list by + setting this environment variable to a colon-separated list of absolute + paths. Only "real" file systems and directories that only contain "real" file + systems as submounts should be used. Do not specify API file systems such as + `/proc/` or `/sys/` here, or hierarchies that have them as submounts. In + particular, do not specify the root directory `/` here. Similarly, + `$SYSTEMD_CONFEXT_HIERARCHIES` works for confext images and supports the + systemd-confext multi-call functionality of sysext. + +`systemd-tmpfiles`: + +* `$SYSTEMD_TMPFILES_FORCE_SUBVOL` — if unset, `v`/`q`/`Q` lines will create + subvolumes only if the OS itself is installed into a subvolume. If set to `1` + (or another value interpreted as true), these lines will always create + subvolumes if the backing filesystem supports them. If set to `0`, these + lines will always create directories. + +`systemd-sysusers` + +* `$SOURCE_DATE_EPOCH` — if unset, the field of the date of last password change + in `/etc/shadow` will be the number of days from Jan 1, 1970 00:00 UTC until + today. If `$SOURCE_DATE_EPOCH` is set to a valid UNIX epoch value in seconds, + then the field will be the number of days until that time instead. This is to + support creating bit-by-bit reproducible system images by choosing a + reproducible value for the field of the date of last password change in + `/etc/shadow`. See: https://reproducible-builds.org/specs/source-date-epoch/ + +`systemd-sysv-generator`: + +* `$SYSTEMD_SYSVINIT_PATH` — Controls where `systemd-sysv-generator` looks for + SysV init scripts. + +* `$SYSTEMD_SYSVRCND_PATH` — Controls where `systemd-sysv-generator` looks for + SysV init script runlevel link farms. + +systemd tests: + +* `$SYSTEMD_TEST_DATA` — override the location of test data. This is useful if + a test executable is moved to an arbitrary location. + +* `$SYSTEMD_TEST_NSS_BUFSIZE` — size of scratch buffers for "reentrant" + functions exported by the nss modules. + +* `$TESTFUNCS` – takes a colon separated list of test functions to invoke, + causes all non-matching test functions to be skipped. Only applies to tests + using our regular test boilerplate. + +fuzzers: + +* `$SYSTEMD_FUZZ_OUTPUT` — A boolean that specifies whether to write output to + stdout. Setting to true is useful in manual invocations, since all output is + suppressed by default. + +* `$SYSTEMD_FUZZ_RUNS` — The number of times execution should be repeated in + manual invocations. + +Note that it may be also useful to set `$SYSTEMD_LOG_LEVEL`, since all logging +is suppressed by default. + +`systemd-importd`: + +* `$SYSTEMD_IMPORT_BTRFS_SUBVOL` — takes a boolean, which controls whether to + prefer creating btrfs subvolumes over plain directories for machine + images. Has no effect on non-btrfs file systems where subvolumes are not + available anyway. If not set, defaults to true. + +* `$SYSTEMD_IMPORT_BTRFS_QUOTA` — takes a boolean, which controls whether to set + up quota automatically for created btrfs subvolumes for machine images. If + not set, defaults to true. Has no effect if machines are placed in regular + directories, because btrfs subvolumes are not supported or disabled. If + enabled, the quota group of the subvolume is automatically added to a + combined quota group for all such machine subvolumes. + +* `$SYSTEMD_IMPORT_SYNC` — takes a boolean, which controls whether to + synchronize images to disk after installing them, before completing the + operation. If not set, defaults to true. If disabled installation of images + will be quicker, but not as safe. + +`systemd-dissect`, `systemd-nspawn` and all other tools that may operate on +disk images with `--image=` or similar: + +* `$SYSTEMD_DISSECT_VERITY_SIDECAR` — takes a boolean, which controls whether to + load "sidecar" Verity metadata files. If enabled (which is the default), + whenever a disk image is used, a set of files with the `.roothash`, + `.usrhash`, `.roothash.p7s`, `.usrhash.p7s`, `.verity` suffixes are searched + adjacent to disk image file, containing the Verity root hashes, their + signatures or the Verity data itself. If disabled this automatic discovery of + Verity metadata files is turned off. + +* `$SYSTEMD_DISSECT_VERITY_EMBEDDED` — takes a boolean, which controls whether + to load the embedded Verity signature data. If enabled (which is the + default), Verity root hash information and a suitable signature is + automatically acquired from a signature partition, following the + [Discoverable Partitions Specification](https://uapi-group.org/specifications/specs/discoverable_partitions_specification). + If disabled any such partition is ignored. Note that this only disables + discovery of the root hash and its signature, the Verity data partition + itself is still searched in the GPT image. + +* `$SYSTEMD_DISSECT_VERITY_SIGNATURE` — takes a boolean, which controls whether + to validate the signature of the Verity root hash if available. If enabled + (which is the default), the signature of suitable disk images is validated + against any of the certificates in `/etc/verity.d/*.crt` (and similar + directories in `/usr/lib/`, `/run`, …) or passed to the kernel for validation + against its built-in certificates. + +* `$SYSTEMD_DISSECT_VERITY_TIMEOUT_SEC=sec` — takes a timespan, which controls + the timeout waiting for the image to be configured. Defaults to 100 msec. + +* `$SYSTEMD_DISSECT_FILE_SYSTEMS=` — takes a colon-separated list of file + systems that may be mounted for automatically dissected disk images. If not + specified defaults to something like: `ext4:btrfs:xfs:vfat:erofs:squashfs` + +* `$SYSTEMD_LOOP_DIRECT_IO` – takes a boolean, which controls whether to enable + `LO_FLAGS_DIRECT_IO` (i.e. direct IO + asynchronous IO) on loopback block + devices when opening them. Defaults to on, set this to "0" to disable this + feature. + +`systemd-cryptsetup`: + +* `$SYSTEMD_CRYPTSETUP_USE_TOKEN_MODULE` – takes a boolean, which controls + whether to use the libcryptsetup "token" plugin module logic even when + activating via FIDO2, PKCS#11, TPM2, i.e. mechanisms natively supported by + `systemd-cryptsetup`. Defaults to enabled. + +* `$SYSTEMD_CRYPTSETUP_TOKEN_PATH` – takes a path to a directory in the file + system. If specified overrides where libcryptsetup will look for token + modules (.so). This is useful for debugging token modules: set this + environment variable to the build directory and you are set. This variable + is only supported when systemd is compiled in developer mode. + +Various tools that read passwords from the TTY, such as `systemd-cryptenroll` +and `homectl`: + +* `$PASSWORD` — takes a string: the literal password to use. If this + environment variable is set it is used as password instead of prompting the + user interactively. This exists primarily for debugging and testing + purposes. Do not use this for production code paths, since environment + variables are typically inherited down the process tree without restrictions + and should thus not be used for secrets. + +* `$NEWPASSWORD` — similar to `$PASSWORD` above, but is used when both a + current and a future password are required, for example if the password is to + be changed. In that case `$PASSWORD` shall carry the current (i.e. old) + password and `$NEWPASSWORD` the new. + +`systemd-homed`: + +* `$SYSTEMD_HOME_ROOT` – defines an absolute path where to look for home + directories/images. When unspecified defaults to `/home/`. This is useful for + debugging purposes in order to run a secondary `systemd-homed` instance that + operates on a different directory where home directories/images are placed. + +* `$SYSTEMD_HOME_RECORD_DIR` – defines an absolute path where to look for + fixated home records kept on the host. When unspecified defaults to + `/var/lib/systemd/home/`. Similar to `$SYSTEMD_HOME_ROOT` this is useful for + debugging purposes, in order to run a secondary `systemd-homed` instance that + operates on a record database entirely separate from the host's. + +* `$SYSTEMD_HOME_DEBUG_SUFFIX` – takes a short string that is suffixed to + `systemd-homed`'s D-Bus and Varlink service names/sockets. This is also + understood by `homectl`. This too is useful for running an additional copy of + `systemd-homed` that doesn't interfere with the host's main one. + +* `$SYSTEMD_HOMEWORK_PATH` – configures the path to the `systemd-homework` + binary to invoke. If not specified defaults to + `/usr/lib/systemd/systemd-homework`. + + Combining these four environment variables is pretty useful when + debugging/developing `systemd-homed`: +```sh +SYSTEMD_HOME_DEBUG_SUFFIX=foo \ + SYSTEMD_HOMEWORK_PATH=/home/lennart/projects/systemd/build/systemd-homework \ + SYSTEMD_HOME_ROOT=/home.foo/ \ + SYSTEMD_HOME_RECORD_DIR=/var/lib/systemd/home.foo/ \ + /home/lennart/projects/systemd/build/systemd-homed +``` + +* `$SYSTEMD_HOME_MOUNT_OPTIONS_BTRFS`, `$SYSTEMD_HOME_MOUNT_OPTIONS_EXT4`, + `$SYSTEMD_HOME_MOUNT_OPTIONS_XFS` – configure the default mount options to + use for LUKS home directories, overriding the built-in default mount + options. There's one variable for each of the supported file systems for the + LUKS home directory backend. + +* `$SYSTEMD_HOME_MKFS_OPTIONS_BTRFS`, `$SYSTEMD_HOME_MKFS_OPTIONS_EXT4`, + `$SYSTEMD_HOME_MKFS_OPTIONS_XFS` – configure additional arguments to use for + `mkfs` when formatting LUKS home directories. There's one variable for each + of the supported file systems for the LUKS home directory backend. + +`kernel-install`: + +* `$KERNEL_INSTALL_BYPASS` – If set to "1", execution of kernel-install is skipped + when kernel-install is invoked. This can be useful if kernel-install is invoked + unconditionally as a child process by another tool, such as package managers + running kernel-install in a postinstall script. + +`systemd-journald`, `journalctl`: + +* `$SYSTEMD_JOURNAL_COMPACT` – Takes a boolean. If enabled, journal files are written + in a more compact format that reduces the amount of disk space required by the + journal. Note that journal files in compact mode are limited to 4G to allow use of + 32-bit offsets. Enabled by default. + +* `$SYSTEMD_JOURNAL_COMPRESS` – Takes a boolean, or one of the compression + algorithms "XZ", "LZ4", and "ZSTD". If enabled, the default compression + algorithm set at compile time will be used when opening a new journal file. + If disabled, the journal file compression will be disabled. Note that the + compression mode of existing journal files are not changed. To make the + specified algorithm takes an effect immediately, you need to explicitly run + `journalctl --rotate`. + +* `$SYSTEMD_CATALOG` – path to the compiled catalog database file to use for + `journalctl -x`, `journalctl --update-catalog`, `journalctl --list-catalog` + and related calls. + +* `$SYSTEMD_CATALOG_SOURCES` – path to the catalog database input source + directory to use for `journalctl --update-catalog`. + +`systemd-pcrextend`, `systemd-cryptsetup`: + +* `$SYSTEMD_FORCE_MEASURE=1` — If set, force measuring of resources (which are + marked for measurement) even if not booted on a kernel equipped with + systemd-stub. Normally, requested measurement of resources is conditionalized + on kernels that have booted with `systemd-stub`. With this environment + variable the test for that my be bypassed, for testing purposes. + +`systemd-repart`: + +* `$SYSTEMD_REPART_MKFS_OPTIONS_<FSTYPE>` – configure additional arguments to use for + `mkfs` when formatting partition file systems. There's one variable for each + of the supported file systems. + +* `$SYSTEMD_REPART_OVERRIDE_FSTYPE` – if set the value will override the file + system type specified in Format= lines in partition definition files. + +`systemd-nspawn`, `systemd-networkd`: + +* `$SYSTEMD_FIREWALL_BACKEND` – takes a string, either `iptables` or + `nftables`. Selects the firewall backend to use. If not specified tries to + use `nftables` and falls back to `iptables` if that's not available. + +`systemd-storagetm`: + +* `$SYSTEMD_NVME_MODEL`, `$SYSTEMD_NVME_FIRMWARE`, `$SYSTEMD_NVME_SERIAL`, + `$SYSTEMD_NVME_UUID` – these take a model string, firmware version string, + serial number string, and UUID formatted as string. If specified these + override the defaults exposed on the NVME subsystem and namespace, which are + derived from the underlying block device and system identity. Do not set the + latter two via the environment variable unless `systemd-storagetm` is invoked + to expose a single device only, since those identifiers better should be kept + unique. + +`systemd-pcrlock`, `systemd-pcrextend`: + +* `$SYSTEMD_MEASURE_LOG_USERSPACE` – the path to the `tpm2-measure.log` file + (containing userspace measurement data) to read. This allows overriding the + default of `/run/log/systemd/tpm2-measure.log`. + +* `$SYSTEMD_MEASURE_LOG_FIRMWARE` – the path to the `binary_bios_measurements` + file (containing firmware measurement data) to read. This allows overriding + the default of `/sys/kernel/security/tpm0/binary_bios_measurements`. + +Tools using the Varlink protocol (such as `varlinkctl`) or sd-bus (such as +`busctl`): + +* `$SYSTEMD_SSH` – the ssh binary to invoke when the `ssh:` transport is + used. May be a filename (which is searched for in `$PATH`) or absolute path. + +* `$SYSTEMD_VARLINK_LISTEN` – interpreted by some tools that provide a Varlink + service. Takes a file system path: if specified the tool will listen on an + `AF_UNIX` stream socket on the specified path in addition to whatever else it + would listen on. |