systemd systemd-measure 1 systemd-measure Pre-calculate and sign expected TPM2 PCR 11 values for booted unified kernel images /usr/lib/systemd/systemd-measure OPTIONS Note: this command is experimental for now. While it is likely to become a regular component of systemd, it might still change in behaviour and interface. systemd-measure is a tool that may be used to pre-calculate and sign the expected TPM2 PCR 11 values that should be seen when a Linux Unified Kernel Image (UKI) based on systemd-stub7 is booted up. It accepts paths to the ELF kernel image file, initrd image file, devicetree file, kernel command line file, os-release5 file, boot splash file, and TPM2 PCR PEM public key file that make up the unified kernel image, and determines the PCR values expected to be in place after booting the image. Calculation starts with a zero-initialized PCR 11, and is executed in a fashion compatible with what systemd-stub does at boot. The result may optionally be signed cryptographically, to allow TPM2 policies that can only be unlocked if a certain set of kernels is booted, for which such a PCR signature can be provided. It usually doesn't make sense to call this tool directly when constructing a UKI. Instead, ukify1 should be used; it will invoke systemd-measure and take care of embedding the resulting measurements into the UKI. The following commands are understood: status This is the default command if none is specified. This queries the local system's TPM2 PCR 11 values and displays them. The data is written in a similar format as the calculate command below, and may be used to quickly compare expectation with reality. calculate Pre-calculate the expected values seen in PCR register 11 after boot-up of a unified kernel image consisting of the components specified with --linux=, --osrel=, --cmdline=, --initrd=, --ucode=, --splash=, --dtb=, --uname=, --sbat=, --pcrpkey=, --profile=, --dtbauto=, --hwids=, see below. Only --linux= is mandatory. (Alternatively, specify --current to use the current values of PCR register 11 instead.) sign As with the calculate command, pre-calculate the expected value seen in TPM2 PCR register 11 after boot-up of a unified kernel image. Then, cryptographically sign the resulting values with the private/public key pair (RSA) configured via --private-key= and --public-key=. This will write a JSON object to standard output that contains signatures for all specified PCR banks (see the --bank= option below), which may be used to unlock encrypted credentials (see systemd-creds1) or LUKS volumes (see systemd-cryptsetup@.service8). This allows binding secrets to a set of kernels for which such PCR 11 signatures can be provided. Note that a TPM2 device must be available for this signing to take place, even though the result is not tied to any TPM2 device or its state. The following options are understood: --linux=PATH --osrel=PATH --cmdline=PATH --initrd=PATH --ucode=PATH --splash=PATH --dtb=PATH --uname=PATH --sbat=PATH --pcrpkey=PATH --profile=PATH --dtbauto=PATH --hwids=PATH When used with the calculate or sign verb, configures the files to read the unified kernel image components from. Each option corresponds with the equally named section in the unified kernel PE file. The --linux= switch expects the path to the ELF kernel file that the unified PE kernel will wrap. All switches except --linux= are optional. Each option may be used at most once. With the exception of --profile=, --dtbauto= and --hwids=, which have been added in version 257. --current When used with the calculate or sign verb, takes the PCR 11 values currently in effect for the system (which should typically reflect the hashes of the currently booted kernel). This can be used in place of --linux= and the other switches listed above. --bank=DIGEST Controls the PCR banks to pre-calculate the PCR values for – in case calculate or sign is invoked –, or the banks to show in the status output. May be used more then once to specify multiple banks. If not specified, defaults to the four banks sha1, sha256, sha384, sha512. --private-key=PATH --public-key=PATH --certificate=PATH These switches take paths to a pair of PEM encoded RSA key files, for use with the sign command. Note the difference between the --pcrpkey= and --public-key= switches. The former selects the data to include in the .pcrpkey PE section of the unified kernel image, the latter picks the public key of the key pair used to sign the resulting PCR 11 values. The former is the key that the booted system will likely use to lock disk and credential encryption to, the latter is the key used for unlocking such resources again. Hence, typically the same PEM key should be supplied in both cases. If the --public-key= is not specified but --private-key= is specified the public key is automatically derived from the private key. --certificate= can be used to specify an X.509 certificate as an alternative to --public-key= since v256. --private-key=PATH/URI --private-key-source=TYPE[:NAME] --certificate=PATH As an alternative to --public-key= for the sign command, these switches can be used to sign with an hardware token. The private key option can take a path or a URI that will be passed to the OpenSSL engine or provider, as specified by --private-key-source= as a type:name tuple, such as engine:pkcs11. The specified OpenSSL signing engine or provider will be used to sign. --tpm2-device=PATH Controls which TPM2 device to use. Expects a device node path referring to the TPM2 chip (e.g. /dev/tpmrm0). Alternatively the special value auto may be specified, in order to automatically determine the device node of a suitable TPM2 device (of which there must be exactly one). The special value list may be used to enumerate all suitable TPM2 devices currently discovered. --phase=PHASE Controls which boot phases to calculate expected PCR 11 values for. This takes a series of colon-separated strings that encode boot "paths" for entering a specific phase of the boot process. Each of the specified strings is measured by the systemd-pcrphase-initrd.service, systemd-pcrphase-sysinit.service, and systemd-pcrphase.service8 into PCR 11 during different milestones of the boot process. This switch may be specified multiple times to calculate PCR values for multiple boot phases at once. If not used defaults to enter-initrd, enter-initrd:leave-initrd, enter-initrd:leave-initrd:sysinit, enter-initrd:leave-initrd:sysinit:ready, i.e. calculates expected PCR values for the boot phase in the initrd, during early boot, during later boot, and during system runtime, but excluding the phases before the initrd or when shutting down. This setting is honoured both by calculate and sign. When used with the latter it's particularly useful for generating PCR signatures that can only be used for unlocking resources during specific parts of the boot process. For further details about PCR boot phases, see systemd-pcrphase.service8. --append=PATH When generating a PCR JSON signature (via the sign command), combine it with a previously generated PCR JSON signature, and output it as one. The specified path must refer to a regular file that contains a valid JSON PCR signature object. The specified file is not modified. It will be read first, then the newly generated signature appended to it, and the resulting object is written to standard output. Use this to generate a single JSON object consisting from signatures made with a number of signing keys (for example, to have one key per boot phase). The command will suppress duplicates: if a specific signature is already included in a JSON signature object it is not added a second time. $ ukify --output=vmlinux.efi \ --os-release=@os-release.txt \ --cmdline=@cmdline.txt \ --splash=splash.bmp \ --devicetree=devicetree.dtb \ --measure \ vmlinux initrd.cpio 11:sha1=d775a7b4482450ac77e03ee19bda90bd792d6ec7 11:sha256=bc6170f9ce28eb051ab465cd62be8cf63985276766cf9faf527ffefb66f45651 11:sha384=1cf67dff4757e61e5...7f49ad720be02fd07263e1f93061243aec599d1ee4b4 11:sha512=8e79acd3ddbbc8282...0c3e8ec0c714821032038f525f744960bcd082d937da ukify1 internally calls systemd-measure. The output with hashes is from systemd-measure. $ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-private-key.pem ..+.+++++++++......+.........+......+.......+....+.....+.+...+.......... $ openssl rsa -pubout -in tpm2-pcr-private-key.pem -out tpm2-pcr-public-key.pem # systemd-measure sign \ --linux=vmlinux \ --osrel=os-release.txt \ --cmdline=cmdline.txt \ --initrd=initrd.cpio \ --splash=splash.bmp \ --dtb=devicetree.dtb \ --pcrpkey=tpm2-pcr-public-key.pem \ --bank=sha1 \ --bank=sha256 \ --private-key=tpm2-pcr-private-key.pem \ --public-key=tpm2-pcr-public-key.pem >tpm2-pcr-signature.json # ukify --output=vmlinuz.efi \ --os-release=@os-release.txt \ --cmdline=@cmdline.txt \ --splash=splash.bmp \ --devicetree=devicetree.dtb \ --pcr-private-key=tpm2-pcr-private-key.pem \ --pcr-public-key=tpm2-pcr-public-key.pem \ --pcr-banks=sha1,sha256 \ vmlinux initrd.cpio Later on, enroll the signed PCR policy on a LUKS volume: # systemd-cryptenroll --tpm2-device=auto \ --tpm2-public-key=tpm2-pcr-public-key.pem \ --tpm2-signature=tpm2-pcr-signature.json \ /dev/sda5 And then unlock the device with the signature: # systemd-cryptsetup attach \ volume5 /dev/sda5 - \ tpm2-device=auto,tpm2-signature=/path/to/tpm2-pcr-signature.json Note that when the generated unified kernel image vmlinux.efi is booted, the signature and public key files will be placed at locations systemd-cryptenroll and systemd-cryptsetup will look for anyway, and thus these paths do not actually need to be specified. This example extends the previous one, but we now introduce a second signing key that is only used to sign PCR policies restricted to the initrd boot phase. This can be used to lock down root volumes in a way that they can only be unlocked before the transition to the host system. Thus we have two classes of secrets or credentials: one that can be unlocked during the entire runtime, and the other that can only be used in the initrd. $ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-private-key.pem .+........+.+........+.......+...+...+........+....+......+..+.......... $ openssl rsa -pubout -in tpm2-pcr-private-key.pem -out tpm2-pcr-public-key.pem $ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-private-key-initrd.pem ..+.......++........+........+......+........+....+.....+.+..+.......... $ openssl rsa -pubout -in tpm2-pcr-private-key-initrd.pem -out tpm2-pcr-public-key-initrd.pem # ukify --output vmlinux-1.2.3.efi \ --os-release=@os-release.txt \ --cmdline=@cmdline.txt \ --splash=splash.bmp \ --devicetree=devicetree.dtb \ --pcr-private-key=tpm2-pcr-private-key.pem \ --pcr-public-key=tpm2-pcr-public-key.pem \ --phases=enter-initrd,enter-initrd:leave-initrd,enter-initrd:leave-initrd:sysinit,enter-initrd:leave-initrd:sysinit:ready \ --pcr-banks=sha1,sha256 \ --pcr-private-key=tpm2-pcr-private-key-initrd.pem \ --pcr-public-key=tpm2-pcr-public-key-initrd.pem \ --phases=enter-initrd \ vmlinux-1.2.3 initrd.cpio \ --uname=1.2.3 + /usr/lib/systemd/systemd-measure sign --linux=vmlinux-1.2.3 \ --osrel=os-release.txt --cmdline=cmdline.txt --dtb=devicetree.dtb \ --splash=splash.bmp --initrd=initrd.cpio --bank=sha1 --bank=sha256 \ --private-key=tpm2-pcr-private-key.pem --public-key=tpm2-pcr-public-key.pem \ --phase=enter-initrd --phase=enter-initrd:leave-initrd \ --phase=enter-initrd:leave-initrd:sysinit \ --phase=enter-initrd:leave-initrd:sysinit:ready + /usr/lib/systemd/systemd-measure sign --linux=vmlinux-1.2.3 \ --osrel=os-release.txt --cmdline=cmdline.txt --dtb=devicetree.dtb \ --splash=splash.bmp --initrd=initrd.cpio --bank=sha1 --bank=sha256 \ --private-key=tpm2-pcr-private-key-initrd.pem \ --public-key=tpm2-pcr-public-key-initrd.pem \ --phase=enter-initrd Wrote unsigned vmlinux-1.2.3.efi ukify prints out both invocations of systemd-measure as informative output (the lines starting with +); this allows us to see how systemd-measure is called. It then merges the output of both invocations into the .pcrsig section. systemd-measure may also do this merge itself using the --append= option. Note that in this example the .pcrpkey PE section contains the key specified by the first --pcr-private-key= option, covering all boot phases. The .pcrpkey section is used in the default policies of systemd-cryptenroll and systemd-creds. To use the stricter policy bound to tpm2-pcr-public-key-initrd.pem, specify --tpm2-public-key= on the command line of those tools. On success, 0 is returned, a non-zero failure code otherwise. systemd1 systemd-stub7 ukify1 systemd-creds1 systemd-cryptsetup@.service8 systemd-pcrphase.service8