systemd-stub
systemd
systemd-stub
7
systemd-stub
sd-stub
linuxx64.efi.stub
linuxia32.efi.stub
linuxaa64.efi.stub
A simple UEFI kernel boot stub
/usr/lib/systemd/boot/efi/linuxx64.efi.stub
/usr/lib/systemd/boot/efi/linuxia32.efi.stub
/usr/lib/systemd/boot/efi/linuxaa64.efi.stub
ESP/.../foo.efi.extra.d/*.addon.efi
ESP/.../foo.efi.extra.d/*.cred
ESP/.../foo.efi.extra.d/*.raw
ESP/loader/addons/*.addon.efi
ESP/loader/credentials/*.cred
Description
systemd-stub (stored in per-architecture files
linuxx64.efi.stub, linuxia32.efi.stub,
linuxaa64.efi.stub on disk) is a simple UEFI boot stub. An UEFI boot stub is
attached to a Linux kernel binary image, and is a piece of code that runs in the UEFI firmware
environment before transitioning into the Linux kernel environment. The UEFI boot stub ensures a Linux
kernel is executable as regular UEFI binary, and is able to do various preparations before switching the
system into the Linux world.
The UEFI boot stub looks for various resources for the kernel invocation inside the UEFI PE binary
itself. This allows combining various resources inside a single PE binary image (usually called "Unified
Kernel Image", or "UKI" for short), which may then be signed via UEFI SecureBoot as a whole, covering all
individual resources at once. Specifically it may include:
The ELF Linux kernel images will be looked for in the .linux PE
section of the executed image.
OS release information, i.e. the
os-release5 file of
the OS the kernel belongs to, in the .osrel PE section.
The kernel command line to pass to the invoked kernel will be looked for in the
.cmdline PE section.
The initrd will be loaded from the .initrd PE
section.
A boot splash (in Windows .BMP format) to show on screen before
invoking the kernel will be looked for in the .splash PE section.
A compiled binary DeviceTree will be looked for in the .dtb PE
section.
Kernel version information, i.e. the output of uname -r for the
kernel included in the UKI, in the .uname PE section.
SBAT revocation
metadata, in the .sbat PE section.
A set of cryptographic signatures for expected TPM2 PCR values when this kernel is
booted, in JSON format, in the .pcrsig section. This is useful for implementing TPM2
policies that bind disk encryption and similar to kernels that are signed by a specific
key.
A public key in PEM format matching this TPM2 PCR signature data in the
.pcrpkey section.
If UEFI SecureBoot is enabled and the .cmdline section is present in the executed
image, any attempts to override the kernel command line by passing one as invocation parameters to the
EFI binary are ignored. Thus, in order to allow overriding the kernel command line, either disable UEFI
SecureBoot, or don't include a kernel command line PE section in the kernel image file. If a command line
is accepted via EFI invocation parameters to the EFI binary it is measured into TPM PCR 12 (if a TPM is
present).
If a DeviceTree is embedded in the .dtb section, it replaces an existing
DeviceTree in the corresponding EFI configuration table. systemd-stub will ask the firmware via the
EFI_DT_FIXUP_PROTOCOL for hardware specific fixups to the DeviceTree.
The contents of seven of these eight PE sections are measured into TPM PCR 11, that is otherwise
not used. Thus, it can be pre-calculated without too much effort. The .pcrsig section
is not included in this PCR measurement, since it's supposed to contain signatures for the expected
results for these measurements, i.e. of the outputs of the measurement operation, and thus cannot also be
input to it.
When .pcrsig and/or .pcrpkey are present in a unified kernel
image their contents are passed to the booted kernel in an synthetic initrd cpio archive that places them in the
/.extra/tpm2-pcr-signature.json and
/.extra/tpm2-pcr-public-key.pem files. Typically, a
tmpfiles.d5 line then
ensures they are copied into /run/systemd/tpm2-pcr-signature.json and
/run/systemd/tpm2-pcr-public-key.pem where they remain accessible even after the
system transitions out of the initrd environment into the host file system. Tools such
systemd-cryptsetup@.service8,
systemd-cryptenroll1
and systemd-creds1
will automatically use files present under these paths to unlock protected resources (encrypted storage
or credentials) or bind encryption to booted kernels.
For further details about the UKI concept, see the UKI specification.
Companion Files
The systemd-stub UEFI boot stub automatically collects three types of auxiliary
companion files optionally placed in drop-in directories on the same partition as the EFI binary,
dynamically generates cpio initrd archives from them, and passes them to the kernel.
Specifically:
For a kernel binary called foo.efi, it
will look for files with the .cred suffix in a directory named
foo.efi.extra.d/ next to it. A cpio
archive is generated from all files found that way, placing them in the
/.extra/credentials/ directory of the initrd file hierarchy. The main initrd may
then access them in this directory. This is supposed to be used to store auxiliary, encrypted,
authenticated credentials for use with LoadCredentialEncrypted= in the UEFI System
Partition. See
systemd.exec5
and
systemd-creds1
for
details on encrypted credentials. The generated cpio archive is measured into TPM
PCR 12 (if a TPM is present).
Similarly, files foo.efi.extra.d/*.raw
are packed up in a cpio archive and placed in the /.extra/sysext/
directory in the initrd file hierarchy. This is supposed to be used to pass additional system extension
images to the initrd. See
systemd-sysext8 for
details on system extension images. The generated cpio archive containing these
system extension images is measured into TPM PCR 13 (if a TPM is present).
Similarly, files
foo.efi.extra.d/*.addon.efi
are loaded and verified as PE binaries, and a .cmdline section is parsed from them.
In case Secure Boot is enabled, these files will be validated using keys in UEFI DB, Shim's DB or
Shim's MOK, and will be rejected otherwise. Additionally, if the both the addon and the UKI contain a
a .uname section, the addon will be rejected if they do not exactly match. It is
recommended to always add a .sbat section to all signed addons, so that they may be
revoked with a SBAT policy update, without requiring blocklisting via DBX/MOKX. The
ukify1 tool will
add a SBAT policy by default if none is passed when building addons. For more information on SBAT see
Shim's documentation.
Addons are supposed to be used to pass additional kernel command line parameters, regardless of the
kernel image being booted, for example to allow platform vendors to ship platform-specific
configuration. The loaded command line addon files are sorted, loaded, measured into TPM PCR 12 (if a
TPM is present) and appended to the kernel command line. UKI command line options are listed first,
then options from addons in /loader/addons/*.addon.efi are appended next, and
finally UKI-specific addons are appended last. Addons are always loaded in the same order based on the
filename, so that, given the same set of addons, the same set of measurements can be expected in
PCR12, however note that the filename is not protected by the PE signature, and as such an attacker
with write access to the ESP could potentially rename these files to change the order in which they
are loaded, in a way that could alter the functionality of the kernel, as some options might be order
dependent. If you sign such addons, you should pay attention to the PCR12 values and make use of an
attestation service so that improper use of your signed addons can be detected and dealt with using
one of the aforementioned revocation mechanisms.
Files /loader/credentials/*.cred are packed up in a
cpio archive and placed in the /.extra/global_credentials/
directory of the initrd file hierarchy. This is supposed to be used to pass additional credentials to
the initrd, regardless of the kernel being booted. The generated cpio archive is
measured into TPM PCR 12 (if a TPM is present).
Additionally, files /loader/addons/*.addon.efi are loaded and
verified as PE binaries, and a .cmdline section is parsed from them. This is
supposed to be used to pass additional command line parameters to the kernel, regardless of the kernel
being booted.
These mechanisms may be used to parameterize and extend trusted (i.e. signed), immutable initrd
images in a reasonably safe way: all data they contain is measured into TPM PCRs. On access they should be
further validated: in case of the credentials case by encrypting/authenticating them via TPM, as exposed
by systemd-creds encrypt -T (see
systemd-creds1 for
details); in case of the system extension images by using signed Verity images.
TPM PCR Notes
Note that when a unified kernel using systemd-stub is invoked the firmware will
measure it as a whole to TPM PCR 4, covering all embedded resources, such as the stub code itself, the
core kernel, the embedded initrd and kernel command line (see above for a full list).
Also note that the Linux kernel will measure all initrds it receives into TPM PCR 9. This means
every type of initrd will be measured two or three times: the initrd embedded in the kernel image will be
measured to PCR 4, PCR 9 and PCR 11; the initrd synthesized from credentials will be measured to both PCR
9 and PCR 12; the initrd synthesized from system extensions will be measured to both PCR 4 and PCR
9. Let's summarize the OS resources and the PCRs they are measured to:
OS Resource PCR Summary
OS Resource
Measurement PCR
systemd-stub code (the entry point of the unified PE binary)
4
Core kernel code (embedded in unified PE binary)
4 + 11
OS release information (embedded in the unified PE binary)
4 + 11
Main initrd (embedded in unified PE binary)
4 + 9 + 11
Default kernel command line (embedded in unified PE binary)
4 + 11
Overridden kernel command line
12
Boot splash (embedded in the unified PE binary)
4 + 11
TPM2 PCR signature JSON (embedded in unified PE binary, synthesized into initrd)
4 + 9
TPM2 PCR PEM public key (embedded in unified PE binary, synthesized into initrd)
4 + 9 + 11
Credentials (synthesized initrd from companion files)
9 + 12
System Extensions (synthesized initrd from companion files)
9 + 13
EFI Variables
The following EFI variables are defined, set and read by systemd-stub, under the
vendor UUID 4a67b082-0a4c-41cf-b6c7-440b29bb8c4f, for communication between the boot
stub and the OS:
LoaderDevicePartUUID
Contains the partition UUID of the EFI System Partition the EFI image was run
from. systemd-gpt-auto-generator8
uses this information to automatically find the disk booted from, in order to discover various other
partitions on the same disk automatically.
LoaderFirmwareInfo
LoaderFirmwareType
Brief firmware information. Use
bootctl1 to view this
data.
LoaderImageIdentifier
The path of EFI executable, relative to the EFI System Partition's root
directory. Use
bootctl1 to view
this data.
StubInfo
Brief stub information. Use
bootctl1 to view
this data.
StubPcrKernelImage
The PCR register index the kernel image, initrd image, boot splash, devicetree
database, and the embedded command line are measured into, formatted as decimal ASCII string (e.g.
11). This variable is set if a measurement was successfully completed, and remains
unset otherwise.
StubPcrKernelParameters
The PCR register index the kernel command line and credentials are measured into,
formatted as decimal ASCII string (e.g. 12). This variable is set if a measurement
was successfully completed, and remains unset otherwise.
StubPcrInitRDSysExts
The PCR register index the systemd extensions for the initrd, which are picked up
from the file system the kernel image is located on. Formatted as decimal ASCII string (e.g.
13). This variable is set if a measurement was successfully completed, and remains
unset otherwise.
Note that some of the variables above may also be set by the boot loader. The stub will only set
them if they aren't set already. Some of these variables are defined by the Boot Loader Interface.
initrd Resources
The following resources are passed as initrd cpio archives to the booted kernel, and thus make up
the initial file system hierarchy in the initrd execution environment:
/
The main initrd from the .initrd PE section of the unified kernel image.
/.extra/credentials/*.cred
Credential files (suffix .cred) that are placed next to the
unified kernel image (as described above) are copied into the
/.extra/credentials/ directory in the initrd execution
environment.
/.extra/global_credentials/*.cred
Similar, credential files in the /loader/credentials/ directory
in the file system the unified kernel image is placed in are copied into the
/.extra/global_credentials/ directory in the initrd execution
environment.
/.extra/sysext/*.raw
System extension image files (suffix .raw) that are placed next to
the unified kernel image (as described above) are copied into the
/.extra/sysext/ directory in the initrd execution environment.
/.extra/tpm2-pcr-signature.json
The TPM2 PCR signature JSON object included in the .pcrsig PE
section of the unified kernel image is copied into the
/.extra/tpm2-pcr-signature.json file in the initrd execution
environment.
/.extra/tpm2-pcr-pkey.pem
The PEM public key included in the .pcrpkey PE section of the
unified kernel image is copied into the /.extra/tpm2-pcr-public-key.pem file in
the initrd execution environment.
Note that all these files are located in the tmpfs file system the kernel sets
up for the initrd file hierarchy and are thus lost when the system transitions from the initrd execution
environment into the host file system. If these resources shall be kept around over this transition they
need to be copied to a place that survives the transition first, for example via a suitable
tmpfiles.d5 line. By
default, this is done for the TPM2 PCR signature and public key files.
SMBIOS Type 11 Strings
systemd-stub can be configured using SMBIOS Type 11 strings. Applicable strings
consist of a name, followed by =, followed by the value.
systemd-stub will search the table for a string with a specific name, and if found,
use its value. The following strings are read:
io.systemd.stub.kernel-cmdline-extra
If set, the value of this string is added to the list of kernel command line
arguments that are measured in PCR12 and passed to the kernel.
Assembling Kernel Images
In order to assemble a bootable Unified Kernel Image from various components as described above, use
ukify1.
See Also
systemd-boot7,
systemd.exec5,
systemd-creds1,
systemd-sysext8,
Boot Loader Specification,
Boot Loader Interface,
ukify1,
systemd-measure1