path: root/src/bin/d2/tests/d2_process_tests.sh.in

#!/bin/sh

# Copyright (C) 2014-2023 Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

# shellcheck disable=SC1091
# SC1091: Not following: ... was not specified as input (see shellcheck -x).

# shellcheck disable=SC2039
# SC2039: In POSIX sh, 'local' is undefined.

# Exit with error if commands exit with non-zero and if undefined variables are
# used.
set -eu

# Path to the temporary configuration file.
CFG_FILE="@abs_top_builddir@/src/bin/d2/tests/test_config.json"
# Path to the D2 log file.
LOG_FILE="@abs_top_builddir@/src/bin/d2/tests/test.log"
# D2 configuration to be stored in the configuration file.
CONFIG="{
    \"DhcpDdns\":
    {
        \"ip-address\": \"127.0.0.1\",
        \"port\": 53001,
        \"tsig-keys\": [],
        \"forward-ddns\" : {},
        \"reverse-ddns\" : {},
        \"loggers\": [
        {
            \"name\": \"kea-dhcp-ddns\",
            \"output-options\": [
                {
                    \"output\": \"$LOG_FILE\"
                }
            ],
            \"severity\": \"DEBUG\"
        }
        ]
    }
}"

# Invalid configuration (syntax error) to check that Kea can check syntax.
CONFIG_BAD_SYNTAX="{
    \"DhcpDdns\":
    {
        \"ip-address\": \"127.0.0.1\",
        \"port\": BOGUS,
        \"tsig-keys\": [],
        \"forward-ddns\" : {},
        \"reverse-ddns\" : {},
        \"loggers\": [
        {
            \"name\": \"kea-dhcp-ddns\",
            \"output-options\": [
                {
                    \"output\": \"$LOG_FILE\"
                }
            ],
            \"severity\": \"INFO\"
        }
        ]
    }
}"

# Invalid configuration (out of range port) to check that Kea can check syntax.
CONFIG_BAD_VALUE="{
    \"DhcpDdns\":
    {
        \"ip-address\": \"127.0.0.1\",
        \"port\": 80000,
        \"tsig-keys\": [],
        \"forward-ddns\" : {},
        \"reverse-ddns\" : {},
        \"loggers\": [
        {
            \"name\": \"kea-dhcp-ddns\",
            \"output-options\": [
                {
                    \"output\": \"$LOG_FILE\"
                }
            ],
            \"severity\": \"INFO\"
        }
        ]
    }
}"

# Invalid value configuration (invalid port) to check that D2
# gracefully handles reconfiguration errors.
CONFIG_INVALID="{
    \"DhcpDdns\":
    {
        \"ip-address\": \"127.0.0.1\",
        \"port\": BOGUS,
        \"tsig-keys\": [],
        \"forward-ddns\" : {},
        \"reverse-ddns\" : {},
        \"loggers\": [
        {
            \"name\": \"kea-dhcp-ddns\",
            \"output-options\": [
                {
                    \"output\": \"$LOG_FILE\"
                }
            ],
            \"severity\": \"INFO\"
        }
        ]
    }
}"

CONFIG_WITH_SECRET='
{
  "DhcpDdns": {
    "tsig-keys": [
      {
        "algorithm": "HMAC-MD5",
        "name": "d2.md5.key",
        "secret": "sensitivejdPJI5QxlpnfQ=="
      }
    ],
    "user-context": {
      "password": "superadmin",
      "secret": "superadmin",
      "shared-info": {
        "password": "superadmin",
        "secret": "superadmin"
      }
    }
  }
}
'

# Set the location of the executable.
bin="kea-dhcp-ddns"
bin_path="@abs_top_builddir@/src/bin/d2"

# Import common test library.
. "@abs_top_builddir@/src/lib/testutils/dhcp_test_lib.sh"

# This test verifies that syntax checking works properly. This function
# requires 3 parameters:
# test_name
# config - string with a content of the config (will be written to a file)
# expected_code - expected exit code returned by kea (0 - success, 1 - failure)
syntax_check_test() {
    local test_name="${1}"
    local config="${2}"
    local expected_code="${3}"

    # Log the start of the test and print test name.
    test_start "${test_name}"
    # Create correct configuration file.
    create_config "${config}"
    # Check it
    printf "Running command %s.\n" "\"${bin_path}/${bin} -t ${CFG_FILE}\""
    run_command \
        "${bin_path}/${bin}" -t "${CFG_FILE}"
    if [ "${EXIT_CODE}" -ne "${expected_code}" ]; then
        printf 'ERROR: expected exit code %s, got %s\n' "${expected_code}" "${EXIT_CODE}"
        clean_exit 1
    fi
    test_finish 0
}

# This test verifies that D2 can be reconfigured with a SIGHUP signal.
dynamic_reconfiguration_test() {
    # Log the start of the test and print test name.
    test_start "dhcp_ddns.dynamic_reconfiguration"
    # Create new configuration file.
    create_config "${CONFIG}"
    # Instruct D2 to log to the specific file.
    set_logger
    # Start D2.
    start_kea ${bin_path}/${bin}
    # Wait up to 20s for D2 to start.
    wait_for_kea 20
    if [ "${_WAIT_FOR_KEA}" -eq 0 ]; then
        printf "ERROR: timeout waiting for D2 to start.\n"
        clean_exit 1
    fi

    # Check if it is still running. It could have terminated (e.g. as a result
    # of configuration failure).
    get_pid ${bin}
    if [ "${_GET_PIDS_NUM}" -ne 1 ]; then
        printf "ERROR: expected one D2 process to be started. Found %d processes\
 started.\n" "${_GET_PIDS_NUM}"
        clean_exit 1
    fi

    # Check in the log file, how many times server has been configured.
    # It should be just once on startup.
    get_reconfigs
    if [ "${_GET_RECONFIGS}" -ne 1 ]; then
        printf "ERROR: D2 hasn't been configured.\n"
        clean_exit 1
    else
        printf "D2 successfully configured.\n"
    fi

    # Now use invalid configuration.
    create_config "${CONFIG_INVALID}"

    # Try to reconfigure by sending SIGHUP
    send_signal 1 ${bin}

    # Wait up to 10s for the D2Controller to log reload signal received.
    wait_for_message 10 "DCTL_CFG_FILE_RELOAD_SIGNAL_RECVD"  1
    if [ "${_WAIT_FOR_MESSAGE}" -eq 0 ]; then
        printf "ERROR: D2 did report the reload signal receipt.\n"
        clean_exit 1
    fi

    # After receiving SIGHUP the server should try to reconfigure itself.
    # The configuration provided is invalid so it should result in
    # reconfiguration failure but the server should still be running.
    wait_for_message 10 "DCTL_CFG_FILE_RELOAD_ERROR" 1
    if [ "${_WAIT_FOR_MESSAGE}" -eq 0 ]; then
        printf "ERROR: D2 did not report reload error.\n"
        clean_exit 1
    fi

    # Make sure the server is still operational.
    get_pid ${bin}
    if [ "${_GET_PIDS_NUM}" -ne 1 ]; then
        printf "ERROR: D2 was killed when attempting reconfiguration.\n"
        clean_exit 1
    fi

    # Restore the good configuration.
    create_config "${CONFIG}"

    # Reconfigure the server with SIGHUP.
    send_signal 1 ${bin}

    # There should be two occurrences of the DHCP4_CONFIG_COMPLETE messages.
    # Wait for it up to 10s.
    wait_for_message 10 "DCTL_CONFIG_COMPLETE" 2

    # After receiving SIGHUP the server should get reconfigured and the
    # reconfiguration should be noted in the log file. We should now
    # have two configurations logged in the log file.
    if [ "${_WAIT_FOR_MESSAGE}" -eq 0 ]; then
        printf "ERROR: D2 hasn't been reconfigured.\n"
        clean_exit 1
    else
        printf "D2 successfully reconfigured.\n"
    fi

    # Make sure the server is still operational.
    get_pid ${bin}
    if [ "${_GET_PIDS_NUM}" -ne 1 ]; then
        printf "ERROR: D2 was killed when attempting reconfiguration.\n"
        clean_exit 1
    fi

    # All ok. Shut down D2 and exit.
    test_finish 0
}

# This test verifies that DHCPv4 server is shut down gracefully when it
# receives a SIGINT or SIGTERM signal.
shutdown_test() {
    local test_name="${1}"  # Test name
    local signum="${2}"     # Signal number
    # Log the start of the test and print test name.
    test_start "${test_name}"
    # Create new configuration file.
    create_config "${CONFIG}"
    # Instruct D2 to log to the specific file.
    set_logger
    # Start D2.
    start_kea ${bin_path}/${bin}
    # Wait up to 20s for D2 to start.
    wait_for_kea 20
    if [ "${_WAIT_FOR_KEA}" -eq 0 ]; then
        printf "ERROR: timeout waiting for D2 to start.\n"
        clean_exit 1
    fi

    # Check if it is still running. It could have terminated (e.g. as a result
    # of configuration failure).
    get_pid ${bin}
    if [ "${_GET_PIDS_NUM}" -ne 1 ]; then
        printf "ERROR: expected one D2 process to be started. Found %d processes\
 started.\n" "${_GET_PIDS_NUM}"
        clean_exit 1
    fi

    # Check in the log file, how many times server has been configured.
    # It should be just once on startup.
    get_reconfigs
    if [ "${_GET_RECONFIGS}" -ne 1 ]; then
        printf "ERROR: server hasn't been configured.\n"
        clean_exit 1
    else
        printf "Server successfully configured.\n"
    fi

    # Send signal to D2 (SIGTERM, SIGINT etc.)
    send_signal "${signum}" "${bin}"

    # Now wait for process to log that it is exiting.
    wait_for_message 10 "DCTL_SHUTDOWN" 1
    if [ "${_WAIT_FOR_MESSAGE}" -eq 0 ]; then
        printf "ERROR: DHCP-DDNS did not log shutdown.\n"
        clean_exit 1
    fi

    # Make sure the server is down.
    wait_for_server_down 5 ${bin}
    assert_eq 1 "${_WAIT_FOR_SERVER_DOWN}" \
        "Expected wait_for_server_down return %d, returned %d"

    test_finish 0
}

server_pid_file_test "${CONFIG}" DCTL_ALREADY_RUNNING
dynamic_reconfiguration_test
shutdown_test "dhcp-ddns.sigterm_test" 15
shutdown_test "dhcp-ddns.sigint_test" 2
version_test "dhcp-ddns.version"
logger_vars_test "dhcp-ddns.variables"
syntax_check_test "dhcp-ddns.syntax_check_success" "${CONFIG}" 0
syntax_check_test "dhcp-ddns.syntax_check_bad_syntax" "${CONFIG_BAD_SYNTAX}" 1
syntax_check_test "dhcp-ddns.syntax_check_bad_values" "${CONFIG_BAD_VALUE}" 1
password_redact_test "dhcp-ddns.password_redact_test" "${CONFIG_WITH_SECRET}" 0