path: root/src/bin/xfrin/xfrin.py.in

#!@PYTHON@

# Copyright (C) 2009-2011  Internet Systems Consortium.
#
# Permission to use, copy, modify, and distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SYSTEMS CONSORTIUM
# DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
# INTERNET SYSTEMS CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

import sys; sys.path.append ('@@PYTHONPATH@@')
import os
import signal
import isc
import asyncore
import struct
import threading
import socket
import random
import time
from functools import reduce
from optparse import OptionParser, OptionValueError
from isc.config.ccsession import *
from isc.notify import notify_out
import isc.util.process
from isc.datasrc import DataSourceClient, ZoneFinder
import isc.net.parse
from isc.xfrin.diff import Diff
from isc.server_common.auth_command import auth_loadzone_command
from isc.log_messages.xfrin_messages import *

isc.log.init("b10-xfrin")
logger = isc.log.Logger("xfrin")

# Pending system-wide debug level definitions, the ones we
# use here are hardcoded for now
DBG_PROCESS = logger.DBGLVL_TRACE_BASIC
DBG_COMMANDS = logger.DBGLVL_TRACE_DETAIL

try:
    from pydnspp import *
except ImportError as e:
    # C++ loadable module may not be installed; even so the xfrin process
    # must keep running, so we warn about it and move forward.
    logger.error(XFRIN_IMPORT_DNS, str(e))

isc.util.process.rename()

# If B10_FROM_BUILD is set in the environment, we use data files
# from a directory relative to that, otherwise we use the ones
# installed on the system
if "B10_FROM_BUILD" in os.environ:
    SPECFILE_PATH = os.environ["B10_FROM_BUILD"] + "/src/bin/xfrin"
    AUTH_SPECFILE_PATH = os.environ["B10_FROM_BUILD"] + "/src/bin/auth"
else:
    PREFIX = "@prefix@"
    DATAROOTDIR = "@datarootdir@"
    SPECFILE_PATH = "@datadir@/@PACKAGE@".replace("${datarootdir}", DATAROOTDIR).replace("${prefix}", PREFIX)
    AUTH_SPECFILE_PATH = SPECFILE_PATH
SPECFILE_LOCATION = SPECFILE_PATH + "/xfrin.spec"
AUTH_SPECFILE_LOCATION = AUTH_SPECFILE_PATH + "/auth.spec"

AUTH_MODULE_NAME = 'Auth'
XFROUT_MODULE_NAME = 'Xfrout'
ZONE_MANAGER_MODULE_NAME = 'Zonemgr'
REFRESH_FROM_ZONEMGR = 'refresh_from_zonemgr'

# Constants for debug levels.
DBG_XFRIN_TRACE = logger.DBGLVL_TRACE_BASIC

# These two default are currently hard-coded. For config this isn't
# necessary, but we need these defaults for optional command arguments
# (TODO: have similar support to get default values for command
# arguments as we do for config options)
DEFAULT_MASTER_PORT = 53
DEFAULT_ZONE_CLASS = RRClass.IN()

__version__ = 'BIND10'

# Internal result codes of an xfr session
XFRIN_OK = 0                    # normal success
XFRIN_FAIL = 1                  # general failure (internal/external)

class XfrinException(Exception):
    pass

class XfrinProtocolError(Exception):
    '''An exception raised for errors encountered in xfrin protocol handling.
    '''
    pass

class XfrinZoneUptodate(Exception):
    '''TBD
    '''
    pass

class XfrinZoneInfoException(Exception):
    """This exception is raised if there is an error in the given
       configuration (part), or when a command does not have a required
       argument or has bad arguments, for instance when the zone's master
       address is not a valid IP address, when the zone does not
       have a name, or when multiple settings are given for the same
       zone."""
    pass

def _check_zone_name(zone_name_str):
    """Checks if the given zone name is a valid domain name, and returns
    it as a Name object. Raises an XfrinException if it is not."""
    try:
        # In the _zones dict, part of the key is the zone name,
        # but due to a limitation in the Name class, we
        # cannot directly use it as a dict key, and we use to_text()
        #
        # Downcase the name here for that reason.
        return Name(zone_name_str, True)
    except (EmptyLabel, TooLongLabel, BadLabelType, BadEscape,
            TooLongName, IncompleteName) as ne:
        raise XfrinZoneInfoException("bad zone name: " + zone_name_str + " (" + str(ne) + ")")

def _check_zone_class(zone_class_str):
    """If the given argument is a string: checks if the given class is
       a valid one, and returns an RRClass object if so.
       Raises XfrinZoneInfoException if not.
       If it is None, this function returns the default RRClass.IN()"""
    if zone_class_str is None:
        return DEFAULT_ZONE_CLASS
    try:
        return RRClass(zone_class_str)
    except InvalidRRClass as irce:
        raise XfrinZoneInfoException("bad zone class: " + zone_class_str + " (" + str(irce) + ")")

def format_zone_str(zone_name, zone_class):
    """Helper function to format a zone name and class as a string of
       the form '<name>/<class>'.
       Parameters:
       zone_name (isc.dns.Name) name to format
       zone_class (isc.dns.RRClass) class to format
    """
    return zone_name.to_text(True) + '/' + str(zone_class)

def format_addrinfo(addrinfo):
    """Helper function to format the addrinfo as a string of the form
       <addr>:<port> (for IPv4) or [<addr>]:port (for IPv6). For unix domain
       sockets, and unknown address families, it returns a basic string
       conversion of the third element of the passed tuple.
       Parameters:
       addrinfo: a 3-tuple consisting of address family, socket type, and,
                 depending on the family, either a 2-tuple with the address
                 and port, or a filename
    """
    try:
        if addrinfo[0] == socket.AF_INET:
            return str(addrinfo[2][0]) + ":" + str(addrinfo[2][1])
        elif addrinfo[0] == socket.AF_INET6:
            return "[" + str(addrinfo[2][0]) + "]:" + str(addrinfo[2][1])
        else:
            return str(addrinfo[2])
    except IndexError:
        raise TypeError("addrinfo argument to format_addrinfo() does not "
                        "appear to be consisting of (family, socktype, (addr, port))")

def get_soa_serial(soa_rdata):
    '''Extract the serial field of SOA RDATA and return it as a Serial object.

    We don't have to be very efficient here, so we first dump the entire RDATA
    as a string and convert the first corresponding field.  This should be
    sufficient in practice, but may not always work when the MNAME or RNAME
    contains an (escaped) space character in their labels.  Ideally there
    should be a more direct and convenient way to get access to the SOA
    fields.
    '''
    return Serial(int(soa_rdata.to_text().split()[2]))

class XfrinState:
    '''
    The states of the incomding *XFR state machine.

    We (will) handle both IXFR and AXFR with a single integrated state
    machine because they cannot be distinguished immediately - an AXFR
    response to an IXFR request can only be detected when the first two (2)
    response RRs have already been received.

    The following diagram summarizes the state transition.  After sending
    the query, xfrin starts the process with the InitialSOA state (all
    IXFR/AXFR response begins with an SOA).  When it reaches IXFREnd
    or AXFREnd, the process successfully completes.

                             (AXFR or
            (recv SOA)        AXFR-style IXFR)  (SOA, add)
    InitialSOA------->FirstData------------->AXFR--------->AXFREnd
         |                |                  |  ^         (post xfr
         |(IXFR &&        |                  |  |        checks, then
         | recv SOA       |                  +--+        commit)
         | not new)       |            (non SOA, add)
         V                |
    IXFRUptodate          |                     (non SOA, delete)
               (pure IXFR,|                           +-------+
            keep handling)|             (Delete SOA)  V       |
                          + ->IXFRDeleteSOA------>IXFRDelete--+
                                   ^                   |
                (see SOA, not end, |          (see SOA)|
            commit, keep handling) |                   |
                                   |                   V
                      +---------IXFRAdd<----------+IXFRAddSOA
        (non SOA, add)|         ^  |    (Add SOA)
                      ----------+  |
                                   |(see SOA w/ end serial, commit changes)
                                   V
                                IXFREnd

    Note that changes are committed for every "difference sequence"
    (i.e. changes for one SOA update).  This means when an IXFR response
    contains multiple difference sequences and something goes wrong
    after several commits, these changes have been published and visible
    to clients even if the IXFR session is subsequently aborted.
    It is not clear if this is valid in terms of the protocol specification.
    Section 4 of RFC 1995 states:

       An IXFR client, should only replace an older version with a newer
       version after all the differences have been successfully processed.

    If this "replacement" is for the changes of one difference sequence
    and "all the differences" mean the changes for that sequence, this
    implementation strictly follows what RFC states.  If this is for
    the entire IXFR response (that may contain multiple sequences),
    we should implement it with one big transaction and one final commit
    at the very end.

    For now, we implement it with multiple smaller commits for two
    reasons.  First, this is what BIND 9 does, and we generally port
    the implementation logic here.  BIND 9 has been supporting IXFR
    for many years, so the fact that it still behaves this way
    probably means it at least doesn't cause a severe operational
    problem in practice.  Second, especially because BIND 10 would
    often uses a database backend, a larger transaction could cause an
    undesirable effects, e.g. suspending normal lookups for a longer
    period depending on the characteristics of the database.  Even if
    we find something wrong in a later sequeunce and abort the
    session, we can start another incremental update from what has
    been validated, or we can switch to AXFR to replace the zone
    completely.

    This implementation uses the state design pattern, where each state
    is represented as a subclass of the base XfrinState class.  Each concrete
    subclass of XfrinState is assumed to define two methods: handle_rr() and
    finish_message().  These methods handle specific part of XFR protocols
    and (if necessary) perform the state transition.

    Conceptually, XfrinState and its subclasses are a "friend" of
    XfrinConnection and are assumed to be allowed to access its internal
    information (even though Python does not have a strict access control
    between different classes).

    The XfrinState and its subclasses are designed to be stateless, and
    can be used as singleton objects.  For now, however, we always instantiate
    a new object for every state transition, partly because the introduction
    of singleton will make a code bit complicated, and partly because
    the overhead of object instantiotion wouldn't be significant for xfrin.

    '''
    def set_xfrstate(self, conn, new_state):
        '''Set the XfrConnection to a given new state.

        As a "friend" class, this method intentionally gets access to the
        connection's "private" method.

        '''
        conn._XfrinConnection__set_xfrstate(new_state)

    def handle_rr(self, conn):
        '''Handle one RR of an XFR response message.

        Depending on the state, the RR is generally added or deleted in the
        corresponding data source, or in some special cases indicates
        a specifi transition, such as starting a new IXFR difference
        sequence or completing the session.

        All subclass has their specific behaviors for this method, so
        there is no default definition.  If the base class version
        is called, it's a bug of the caller, and it's notified via
        an XfrinException exception.

        This method returns a boolean value: True if the given RR was
        fully handled and the caller should go to the next RR; False
        if the caller needs to call this method with the (possibly) new
        state for the same RR again.

        '''
        raise XfrinException("Internal bug: " +
                             "XfrinState.handle_rr() called directly")

    def finish_message(self, conn):
        '''Perform any final processing after handling all RRs of a response.

        This method then returns a boolean indicating whether to continue
        receiving the message.  Unless it's in the end of the entire XFR
        session, we should continue, so this default method simply returns
        True.

        '''
        return True

class XfrinInitialSOA(XfrinState):
    def handle_rr(self, conn, rr):
        if rr.get_type() != RRType.SOA():
            raise XfrinProtocolError('First RR in zone transfer must be SOA ('
                                     + rr.get_type().to_text() + ' received)')
        conn._end_serial = get_soa_serial(rr.get_rdata()[0])

        if conn._request_type == RRType.IXFR() and \
                conn._end_serial <= conn._request_serial:
            logger.info(XFRIN_IXFR_UPTODATE, conn.zone_str(),
                        conn._request_serial, conn._end_serial)
            self.set_xfrstate(conn, XfrinIXFRUptodate())
        else:
            self.set_xfrstate(conn, XfrinFirstData())

        return True

class XfrinFirstData(XfrinState):
    def handle_rr(self, conn, rr):
        '''Handle the first RR after initial SOA in an XFR session.

        This state happens exactly once in an XFR session, where
        we decide whether it's incremental update ("real" IXFR) or
        non incremental update (AXFR or AXFR-style IXFR).
        If we initiated IXFR and the transfer begins with two SOAs
        (the serial of the second one being equal to our serial),
        it's incremental; otherwise it's non incremental.

        This method always return False (unlike many other handle_rr()
        methods) because this first RR must be examined again in the
        determined update context.

        Note that in the non incremental case the RR should normally be
        something other SOA, but it's still possible it's an SOA with a
        different serial than ours.  The only possible interpretation at
        this point is that it's non incremental update that only consists
        of the SOA RR.  It will result in broken zone (for example, it
        wouldn't even contain an apex NS) and should be rejected at post
        XFR processing, but in terms of the XFR session processing we
        accept it and move forward.

        Note further that, in the half-broken SOA-only transfer case,
        these two SOAs are supposed to be the same as stated in Section 2.2
        of RFC 5936.  We don't check that condition here, either; we'll
        leave whether and how to deal with that situation to the end of
        the processing of non incremental update.  See also a related
        discussion at the IETF dnsext wg:
        http://www.ietf.org/mail-archive/web/dnsext/current/msg07908.html

        '''
        if conn._request_type == RRType.IXFR() and \
                rr.get_type() == RRType.SOA() and \
                conn._request_serial == get_soa_serial(rr.get_rdata()[0]):
            logger.debug(DBG_XFRIN_TRACE, XFRIN_GOT_INCREMENTAL_RESP,
                         conn.zone_str())
            self.set_xfrstate(conn, XfrinIXFRDeleteSOA())
        else:
            logger.debug(DBG_XFRIN_TRACE, XFRIN_GOT_NONINCREMENTAL_RESP,
                 conn.zone_str())
            # We are now going to add RRs to the new zone.  We need create
            # a Diff object.  It will be used throughtout the XFR session.
            conn._diff = Diff(conn._datasrc_client, conn._zone_name, True)
            self.set_xfrstate(conn, XfrinAXFR())
        return False

class XfrinIXFRDeleteSOA(XfrinState):
    def handle_rr(self, conn, rr):
        if rr.get_type() != RRType.SOA():
            # this shouldn't happen; should this occur it means an internal
            # bug.
            raise XfrinException(rr.get_type().to_text() +
                                 ' RR is given in IXFRDeleteSOA state')
        # This is the beginning state of one difference sequence (changes
        # for one SOA update).  We need to create a new Diff object now.
        # Note also that we (unconditionally) enable journaling here.  The
        # Diff constructor may internally disable it, however, if the
        # underlying data source doesn't support journaling.
        conn._diff = Diff(conn._datasrc_client, conn._zone_name, False, True)
        conn._diff.delete_data(rr)
        self.set_xfrstate(conn, XfrinIXFRDelete())
        conn.get_transfer_stats().ixfr_deletion_count += 1
        return True

class XfrinIXFRDelete(XfrinState):
    def handle_rr(self, conn, rr):
        if rr.get_type() == RRType.SOA():
            # This is the only place where current_serial is set
            conn._current_serial = get_soa_serial(rr.get_rdata()[0])
            self.set_xfrstate(conn, XfrinIXFRAddSOA())
            return False
        conn._diff.delete_data(rr)
        conn.get_transfer_stats().ixfr_deletion_count += 1
        return True

class XfrinIXFRAddSOA(XfrinState):
    def handle_rr(self, conn, rr):
        if rr.get_type() != RRType.SOA():
            # this shouldn't happen; should this occur it means an internal
            # bug.
            raise XfrinException(rr.get_type().to_text() +
                                 ' RR is given in IXFRAddSOA state')
        conn._diff.add_data(rr)
        self.set_xfrstate(conn, XfrinIXFRAdd())
        conn.get_transfer_stats().ixfr_addition_count += 1
        return True

class XfrinIXFRAdd(XfrinState):
    def handle_rr(self, conn, rr):
        if rr.get_type() == RRType.SOA():
            # This SOA marks the end of a difference sequence
            conn.get_transfer_stats().ixfr_changeset_count += 1
            soa_serial = get_soa_serial(rr.get_rdata()[0])
            if soa_serial == conn._end_serial:
                conn._diff.commit()
                self.set_xfrstate(conn, XfrinIXFREnd())
                return True
            elif soa_serial != conn._current_serial:
                raise XfrinProtocolError('IXFR out of sync: expected ' +
                                         'serial ' +
                                         str(conn._current_serial) +
                                         ', got ' + str(soa_serial))
            else:
                conn._diff.commit()
                self.set_xfrstate(conn, XfrinIXFRDeleteSOA())
                return False
        conn._diff.add_data(rr)
        conn.get_transfer_stats().ixfr_addition_count += 1
        return True

class XfrinIXFREnd(XfrinState):
    def handle_rr(self, conn, rr):
        raise XfrinProtocolError('Extra data after the end of IXFR diffs: ' +
                                 rr.to_text())

    def finish_message(self, conn):
        '''Final processing after processing an entire IXFR session.

        There will be more actions here, but for now we simply return False,
        indicating there will be no more message to receive.

        '''
        return False

class XfrinIXFRUptodate(XfrinState):
    def handle_rr(self, conn, rr):
        raise XfrinProtocolError('Extra data after single IXFR response ' +
                                 rr.to_text())

    def finish_message(self, conn):
        raise XfrinZoneUptodate

class XfrinAXFR(XfrinState):
    def handle_rr(self, conn, rr):
        """
        Handle the RR by putting it into the zone.
        """
        conn._diff.add_data(rr)
        if rr.get_type() == RRType.SOA():
            # SOA means end.  Don't commit it yet - we need to perform
            # post-transfer checks

            soa_serial = get_soa_serial(rr.get_rdata()[0])
            if conn._end_serial != soa_serial:
                logger.warn(XFRIN_AXFR_INCONSISTENT_SOA, conn.zone_str(),
                            conn._end_serial, soa_serial)

            self.set_xfrstate(conn, XfrinAXFREnd())
        conn.get_transfer_stats().axfr_rr_count += 1
        # Yes, we've eaten this RR.
        return True

class XfrinAXFREnd(XfrinState):
    def handle_rr(self, conn, rr):
        raise XfrinProtocolError('Extra data after the end of AXFR: ' +
                                 rr.to_text())

    def finish_message(self, conn):
        """
        Final processing after processing an entire AXFR session.

        In this process all the AXFR changes are committed to the
        data source.

        There might be more actions here, but for now we simply return False,
        indicating there will be no more message to receive.

        """
        conn._diff.commit()
        return False

class XfrinTransferStats:
    """
    This class keeps a record of transfer data for logging purposes.
    It records number of messages, rrs, and bytes transfered, as well
    as the start and end time. The start time is set upon instantiation of
    this class. The end time is set the first time finalize(),
    get_running_time(), or get_bytes_per_second() is called. The end time is
    set only once; subsequent calls to any of these methods does not modify
    it further.
    All _count instance variables can be directly set as needed by the
    class collecting these results.
    """
    def __init__(self):
        self.message_count = 0
        self.axfr_rr_count = 0
        self.byte_count = 0
        self.ixfr_changeset_count = 0;
        self.ixfr_deletion_count = 0;
        self.ixfr_addition_count = 0;
        self._start_time = time.time()
        self._end_time = None

    def finalize(self):
        """Sets the end time to time.time() if not done already."""
        if self._end_time is None:
            self._end_time = time.time()

    def get_running_time(self):
        """Calls finalize(), then returns the difference between creation
           and finalization time"""
        self.finalize()
        return self._end_time - self._start_time

    def get_bytes_per_second(self):
        """Returns the number of bytes per second, based on the result of
           get_running_time() and the value of bytes_count."""
        runtime = self.get_running_time()
        if runtime > 0.0:
            return float(self.byte_count) / runtime
        else:
            # This should never happen, but if some clock is so
            # off or reset in the meantime, we do need to return
            # *something* (and not raise an error)
            if self.byte_count == 0:
                return 0.0
            else:
                return float("inf")


class XfrinConnection(asyncore.dispatcher):
    '''Do xfrin in this class. '''

    def __init__(self,
                 sock_map, zone_name, rrclass, datasrc_client,
                 shutdown_event, master_addrinfo, db_file, tsig_key=None,
                 idle_timeout=60):
        '''Constructor of the XfirnConnection class.

        db_file: SQLite3 DB file.  Unforutnately we still need this for
                 temporary workaround in _get_zone_soa().  This should be
                 removed when we eliminate the need for the workaround.
        idle_timeout: max idle time for read data from socket.
        datasrc_client: the data source client object used for the XFR session.
                        This will eventually replace db_file completely.

        '''

        asyncore.dispatcher.__init__(self, map=sock_map)

        # The XFR state.  Conceptually this is purely private, so we emphasize
        # the fact by the double underscore.  Other classes are assumed to
        # get access to this via get_xfrstate(), and only XfrinState classes
        # are assumed to be allowed to modify it via __set_xfrstate().
        self.__state = None

        # Requested transfer type (RRType.AXFR or RRType.IXFR).  The actual
        # transfer type may differ due to IXFR->AXFR fallback:
        self._request_type = None

        # Zone parameters
        self._zone_name = zone_name
        self._rrclass = rrclass

        # Data source handler
        self._db_file = db_file
        self._datasrc_client = datasrc_client
        self._zone_soa = self._get_zone_soa()

        self._sock_map = sock_map
        self._soa_rr_count = 0
        self._idle_timeout = idle_timeout
        self._shutdown_event = shutdown_event
        self._master_addrinfo = master_addrinfo
        self._tsig_key = tsig_key
        self._tsig_ctx = None
        # tsig_ctx_creator is introduced to allow tests to use a mock class for
        # easier tests (in normal case we always use the default)
        self._tsig_ctx_creator = lambda key : TSIGContext(key)

        # keep a record of this specific transfer to log on success
        # (time, rr/s, etc)
        self._transfer_stats = XfrinTransferStats()

    def init_socket(self):
        '''Initialize the underlyig socket.

        This is essentially a part of __init__() and is expected to be
        called immediately after the constructor.  It's separated from
        the constructor because otherwise we might not be able to close
        it if the constructor raises an exception after opening the socket.
        '''
        self.create_socket(self._master_addrinfo[0], self._master_addrinfo[1])
        self.setblocking(1)

    def _get_zone_soa(self):
        '''Retrieve the current SOA RR of the zone to be transferred.

        It will be used for various purposes in subsequent xfr protocol
        processing.   It is validly possible that the zone is currently
        empty and therefore doesn't have an SOA, so this method doesn't
        consider it an error and returns None in such a case.  It may or
        may not result in failure in the actual processing depending on
        how the SOA is used.

        When the zone has an SOA RR, this method makes sure that it's
        valid, i.e., it has exactly one RDATA; if it is not the case
        this method returns None.

        If the underlying data source doesn't even know the zone, this method
        tries to provide backward compatible behavior where xfrin is
        responsible for creating zone in the corresponding DB table.
        For a longer term we should deprecate this behavior by introducing
        more generic zone management framework, but at the moment we try
        to not surprise existing users.  (Note also that the part of
        providing the compatible behavior uses the old data source API.
        We'll deprecate this API in a near future, too).

        '''
        # get the zone finder.  this must be SUCCESS (not even
        # PARTIALMATCH) because we are specifying the zone origin name.
        result, finder = self._datasrc_client.find_zone(self._zone_name)
        if result != DataSourceClient.SUCCESS:
            # The data source doesn't know the zone.  For now, we provide
            # backward compatibility and creates a new one ourselves.
            isc.datasrc.sqlite3_ds.load(self._db_file,
                                        self._zone_name.to_text(),
                                        lambda : [])
            logger.warn(XFRIN_ZONE_CREATED, self.zone_str())
            # try again
            result, finder = self._datasrc_client.find_zone(self._zone_name)
        if result != DataSourceClient.SUCCESS:
            return None
        result, soa_rrset, _ = finder.find(self._zone_name, RRType.SOA())
        if result != ZoneFinder.SUCCESS:
            logger.info(XFRIN_ZONE_NO_SOA, self.zone_str())
            return None
        if soa_rrset.get_rdata_count() != 1:
            logger.warn(XFRIN_ZONE_MULTIPLE_SOA, self.zone_str(),
                        soa_rrset.get_rdata_count())
            return None
        return soa_rrset

    def __set_xfrstate(self, new_state):
        self.__state = new_state

    def get_xfrstate(self):
        return self.__state

    def get_transfer_stats(self):
        """Returns the transfer stats object, used to measure transfer time,
           and number of messages/records/bytes transfered."""
        return self._transfer_stats

    def zone_str(self):
        '''A convenience function for logging to include zone name and class'''
        return format_zone_str(self._zone_name, self._rrclass)

    def connect_to_master(self):
        '''Connect to master in TCP.'''

        try:
            self.connect(self._master_addrinfo[2])
            return True
        except socket.error as e:
            logger.error(XFRIN_CONNECT_MASTER, self._master_addrinfo[2],
                         str(e))
            return False

    def _create_query(self, query_type):
        '''Create an XFR-related query message.

        query_type is either SOA, AXFR or IXFR.  An IXFR query needs the
        zone's current SOA record.  If it's not known, it raises an
        XfrinException exception.  Note that this may not necessarily a
        broken configuration; for the first attempt of transfer the secondary
        may not have any boot-strap zone information, in which case IXFR
        simply won't work.  The xfrin should then fall back to AXFR.
        _request_serial is recorded for later use.

        '''
        msg = Message(Message.RENDER)
        query_id = random.randint(0, 0xFFFF)
        self._query_id = query_id
        msg.set_qid(query_id)
        msg.set_opcode(Opcode.QUERY())
        msg.set_rcode(Rcode.NOERROR())
        msg.add_question(Question(self._zone_name, self._rrclass, query_type))

        # Remember our serial, if known
        self._request_serial = get_soa_serial(self._zone_soa.get_rdata()[0]) \
            if self._zone_soa is not None else None

        # Set the authority section with our SOA for IXFR
        if query_type == RRType.IXFR():
            if self._zone_soa is None:
                # (incremental) IXFR doesn't work without known SOA
                raise XfrinException('Failed to create IXFR query due to no ' +
                                     'SOA for ' + self.zone_str())
            msg.add_rrset(Message.SECTION_AUTHORITY, self._zone_soa)

        return msg

    def _send_data(self, data):
        size = len(data)
        total_count = 0
        while total_count < size:
            count = self.send(data[total_count:])
            total_count += count

    def _send_query(self, query_type):
        '''Send query message over TCP. '''

        msg = self._create_query(query_type)
        render = MessageRenderer()
        # XXX Currently, python wrapper doesn't accept 'None' parameter in this case,
        # we should remove the if statement and use a universal interface later.
        if self._tsig_key is not None:
            self._tsig_ctx = self._tsig_ctx_creator(self._tsig_key)
            msg.to_wire(render, self._tsig_ctx)
        else:
            msg.to_wire(render)

        header_len = struct.pack('H', socket.htons(render.get_length()))
        self._send_data(header_len)
        self._send_data(render.get_data())

    def _asyncore_loop(self):
        '''
        This method is a trivial wrapper for asyncore.loop().  It's extracted from
        _get_request_response so that we can test the rest of the code without
        involving actual communication with a remote server.'''
        asyncore.loop(self._idle_timeout, map=self._sock_map, count=1)

    def _get_request_response(self, size):
        recv_size = 0
        data = b''
        while recv_size < size:
            self._recv_time_out = True
            self._need_recv_size = size - recv_size
            self._asyncore_loop()
            if self._recv_time_out:
                raise XfrinException('receive data from socket time out.')

            recv_size += self._recvd_size
            data += self._recvd_data

        return data

    def _check_response_tsig(self, msg, response_data):
        tsig_record = msg.get_tsig_record()
        if self._tsig_ctx is not None:
            tsig_error = self._tsig_ctx.verify(tsig_record, response_data)
            if tsig_error != TSIGError.NOERROR:
                raise XfrinProtocolError('TSIG verify fail: %s' %
                                         str(tsig_error))
        elif tsig_record is not None:
            # If the response includes a TSIG while we didn't sign the query,
            # we treat it as an error.  RFC doesn't say anything about this
            # case, but it clearly states the server must not sign a response
            # to an unsigned request.  Although we could be flexible, no sane
            # implementation would return such a response, and since this is
            # part of security mechanism, it's probably better to be more
            # strict.
            raise XfrinProtocolError('Unexpected TSIG in response')

    def __parse_soa_response(self, msg, response_data):
        '''Parse a response to SOA query and extract the SOA from answer.

        This is a subroutine of _check_soa_serial().  This method also
        validates message, and rejects bogus responses with XfrinProtocolError.

        If everything is okay, it returns the SOA RR from the answer section
        of the response.

        '''
        # Check TSIG integrity and validate the header.  Unlike AXFR/IXFR,
        # we should be more strict for SOA queries and check the AA flag, too.
        self._check_response_tsig(msg, response_data)
        self._check_response_header(msg)
        if not msg.get_header_flag(Message.HEADERFLAG_AA):
            raise XfrinProtocolError('non-authoritative answer to SOA query')

        # Validate the question section
        n_question = msg.get_rr_count(Message.SECTION_QUESTION)
        if n_question != 1:
            raise XfrinProtocolError('Invalid response to SOA query: ' +
                                     '(' + str(n_question) + ' questions, 1 ' +
                                     'expected)')
        resp_question = msg.get_question()[0]
        if resp_question.get_name() != self._zone_name or \
                resp_question.get_class() != self._rrclass or \
                resp_question.get_type() != RRType.SOA():
            raise XfrinProtocolError('Invalid response to SOA query: '
                                     'question mismatch: ' +
                                     str(resp_question))

        # Look into the answer section for SOA
        soa = None
        for rr in msg.get_section(Message.SECTION_ANSWER):
            if rr.get_type() == RRType.SOA():
                if soa is not None:
                    raise XfrinProtocolError('SOA response had multiple SOAs')
                soa = rr
            # There should not be a CNAME record at top of zone.
            if rr.get_type() == RRType.CNAME():
                raise XfrinProtocolError('SOA query resulted in CNAME')

        # If SOA is not found, try to figure out the reason then report it.
        if soa is None:
            # See if we have any SOA records in the authority section.
            for rr in msg.get_section(Message.SECTION_AUTHORITY):
                if rr.get_type() == RRType.NS():
                    raise XfrinProtocolError('SOA query resulted in referral')
                if rr.get_type() == RRType.SOA():
                    raise XfrinProtocolError('SOA query resulted in NODATA')
            raise XfrinProtocolError('No SOA record found in response to ' +
                                     'SOA query')

        # Check if the SOA is really what we asked for
        if soa.get_name() != self._zone_name or \
                soa.get_class() != self._rrclass:
            raise XfrinProtocolError("SOA response doesn't match query: " +
                                     str(soa))

        # All okay, return it
        return soa


    def _check_soa_serial(self):
        '''Send SOA query and compare the local and remote serials.

        If we know our local serial and the remote serial isn't newer
        than ours, we abort the session with XfrinZoneUptodate.
        On success it returns XFRIN_OK for testing.  The caller won't use it.

        '''

        self._send_query(RRType.SOA())
        data_len = self._get_request_response(2)
        msg_len = socket.htons(struct.unpack('H', data_len)[0])
        soa_response = self._get_request_response(msg_len)
        msg = Message(Message.PARSE)
        msg.from_wire(soa_response, Message.PRESERVE_ORDER)

        # Validate/parse the rest of the response, and extract the SOA
        # from the answer section
        soa = self.__parse_soa_response(msg, soa_response)

        # Compare the two serials.  If ours is 'new', abort with ZoneUptodate.
        primary_serial = get_soa_serial(soa.get_rdata()[0])
        if self._request_serial is not None and \
                self._request_serial >= primary_serial:
            if self._request_serial != primary_serial:
                logger.info(XFRIN_ZONE_SERIAL_AHEAD, primary_serial,
                            self.zone_str(),
                            format_addrinfo(self._master_addrinfo),
                            self._request_serial)
            raise XfrinZoneUptodate

        return XFRIN_OK

    def do_xfrin(self, check_soa, request_type=RRType.AXFR()):
        '''Do an xfr session by sending xfr request and parsing responses.'''

        try:
            ret = XFRIN_OK
            self._request_type = request_type
            # Right now RRType.[IA]XFR().to_text() is 'TYPExxx', so we need
            # to hardcode here.
            req_str = 'IXFR' if request_type == RRType.IXFR() else 'AXFR'
            if check_soa:
                self._check_soa_serial()

            logger.info(XFRIN_XFR_TRANSFER_STARTED, req_str, self.zone_str())
            self._send_query(self._request_type)
            self.__state = XfrinInitialSOA()
            self._handle_xfrin_responses()
            # Depending what data was found, we log different status reports
            # (In case of an AXFR-style IXFR, print the 'AXFR' message)
            if self._transfer_stats.axfr_rr_count == 0:
                logger.info(XFRIN_IXFR_TRANSFER_SUCCESS,
                            self.zone_str(),
                            self._transfer_stats.message_count,
                            self._transfer_stats.ixfr_changeset_count,
                            self._transfer_stats.ixfr_deletion_count,
                            self._transfer_stats.ixfr_addition_count,
                            self._transfer_stats.byte_count,
                            "%.3f" % self._transfer_stats.get_running_time(),
                            "%.f" % self._transfer_stats.get_bytes_per_second()
                           )
            else:
                logger.info(XFRIN_TRANSFER_SUCCESS,
                            req_str,
                            self.zone_str(),
                            self._transfer_stats.message_count,
                            self._transfer_stats.axfr_rr_count,
                            self._transfer_stats.byte_count,
                            "%.3f" % self._transfer_stats.get_running_time(),
                            "%.f" % self._transfer_stats.get_bytes_per_second()
                           )

        except XfrinZoneUptodate:
            # Eventually we'll probably have to treat this case as a trigger
            # of trying another primary server, etc, but for now we treat it
            # as "success".
            pass
        except XfrinProtocolError as e:
            logger.info(XFRIN_XFR_TRANSFER_PROTOCOL_ERROR, req_str,
                        self.zone_str(),
                        format_addrinfo(self._master_addrinfo), str(e))
            ret = XFRIN_FAIL
        except XfrinException as e:
            logger.error(XFRIN_XFR_TRANSFER_FAILURE, req_str,
                         self.zone_str(),
                         format_addrinfo(self._master_addrinfo), str(e))
            ret = XFRIN_FAIL
        except Exception as e:
            # Catching all possible exceptions like this is generally not a
            # good practice, but handling an xfr session could result in
            # so many types of exceptions, including ones from the DNS library
            # or from the data source library.  Eventually we'd introduce a
            # hierarchy for exception classes from a base "ISC exception" and
            # catch it here, but until then we need broadest coverage so that
            # we won't miss anything.

            logger.error(XFRIN_XFR_OTHER_FAILURE, req_str,
                         self.zone_str(), str(e))
            ret = XFRIN_FAIL
        finally:
            # Make sure any remaining transaction in the diff is closed
            # (if not yet - possible in case of xfr-level exception) as soon
            # as possible
            self._diff = None

        return ret

    def _check_response_header(self, msg):
        '''Perform minimal validation on responses'''

        # It's not clear how strict we should be about response validation.
        # BIND 9 ignores some cases where it would normally be considered a
        # bogus response.  For example, it accepts a response even if its
        # opcode doesn't match that of the corresponding request.
        # According to an original developer of BIND 9 some of the missing
        # checks are deliberate to be kind to old implementations that would
        # cause interoperability trouble with stricter checks.

        msg_rcode = msg.get_rcode()
        if msg_rcode != Rcode.NOERROR():
            raise XfrinProtocolError('error response: %s' %
                                     msg_rcode.to_text())

        if not msg.get_header_flag(Message.HEADERFLAG_QR):
            raise XfrinProtocolError('response is not a response')

        if msg.get_qid() != self._query_id:
            raise XfrinProtocolError('bad query id')

    def _check_response_status(self, msg):
        '''Check validation of xfr response. '''

        self._check_response_header(msg)

        if msg.get_rr_count(Message.SECTION_QUESTION) > 1:
            raise XfrinProtocolError('query section count greater than 1')

    def _handle_xfrin_responses(self):
        read_next_msg = True
        while read_next_msg:
            data_len = self._get_request_response(2)
            msg_len = socket.htons(struct.unpack('H', data_len)[0])
            self._transfer_stats.byte_count += msg_len + 2
            recvdata = self._get_request_response(msg_len)
            msg = Message(Message.PARSE)
            msg.from_wire(recvdata, Message.PRESERVE_ORDER)
            self._transfer_stats.message_count += 1

            # TSIG related checks, including an unexpected signed response
            self._check_response_tsig(msg, recvdata)

            # Perform response status validation
            self._check_response_status(msg)

            for rr in msg.get_section(Message.SECTION_ANSWER):
                rr_handled = False
                while not rr_handled:
                    rr_handled = self.__state.handle_rr(self, rr)

            read_next_msg = self.__state.finish_message(self)

            if self._shutdown_event.is_set():
                raise XfrinException('xfrin is forced to stop')

    def handle_read(self):
        '''Read query's response from socket. '''

        self._recvd_data = self.recv(self._need_recv_size)
        self._recvd_size = len(self._recvd_data)
        self._recv_time_out = False

    def writable(self):
        '''Ignore the writable socket. '''

        return False

def __process_xfrin(server, zone_name, rrclass, db_file,
                    shutdown_event, master_addrinfo, check_soa, tsig_key,
                    request_type, conn_class):
    conn = None
    exception = None
    ret = XFRIN_FAIL
    try:
        # Create a data source client used in this XFR session.  Right now we
        # still assume an sqlite3-based data source, and use both the old and new
        # data source APIs.  We also need to use a mock client for tests.
        # For a temporary workaround to deal with these situations, we skip the
        # creation when the given file is none (the test case).  Eventually
        # this code will be much cleaner.
        datasrc_client = None
        if db_file is not None:
            # temporary hardcoded sqlite initialization. Once we decide on
            # the config specification, we need to update this (TODO)
            # this may depend on #1207, or any followup ticket created for #1207
            datasrc_type = "sqlite3"
            datasrc_config = "{ \"database_file\": \"" + db_file + "\"}"
            datasrc_client = DataSourceClient(datasrc_type, datasrc_config)

        # Create a TCP connection for the XFR session and perform the operation.
        sock_map = {}
        # In case we were asked to do IXFR and that one fails, we try again with
        # AXFR. But only if we could actually connect to the server.
        #
        # So we start with retry as True, which is set to false on each attempt.
        # In the case of connected but failed IXFR, we set it to true once again.
        retry = True
        while retry:
            retry = False
            conn = conn_class(sock_map, zone_name, rrclass, datasrc_client,
                              shutdown_event, master_addrinfo, db_file,
                              tsig_key)
            conn.init_socket()
            ret = XFRIN_FAIL
            if conn.connect_to_master():
                ret = conn.do_xfrin(check_soa, request_type)
                if ret == XFRIN_FAIL and request_type == RRType.IXFR():
                    # IXFR failed for some reason. It might mean the server can't
                    # handle it, or we don't have the zone or we are out of sync or
                    # whatever else. So we retry with with AXFR, as it may succeed
                    # in many such cases.
                    retry = True
                    request_type = RRType.AXFR()
                    logger.warn(XFRIN_XFR_TRANSFER_FALLBACK, conn.zone_str())
                    conn.close()
                    conn = None

    except Exception as ex:
        # If exception happens, just remember it here so that we can re-raise
        # after cleaning up things.  We don't log it here because we want
        # eliminate smallest possibility of having an exception in logging
        # itself.
        exception = ex

    # asyncore.dispatcher requires explicit close() unless its lifetime
    # from born to destruction is closed within asyncore.loop, which is not
    # the case for us.  We always close() here, whether or not do_xfrin
    # succeeds, and even when we see an unexpected exception.
    if conn is not None:
        conn.close()

    # Publish the zone transfer result news, so zonemgr can reset the
    # zone timer, and xfrout can notify the zone's slaves if the result
    # is success.
    server.publish_xfrin_news(zone_name, rrclass, ret)

    if exception is not None:
        raise exception

def process_xfrin(server, xfrin_recorder, zone_name, rrclass, db_file,
                  shutdown_event, master_addrinfo, check_soa, tsig_key,
                  request_type, conn_class=XfrinConnection):
    # Even if it should be rare, the main process of xfrin session can
    # raise an exception.  In order to make sure the lock in xfrin_recorder
    # is released in any cases, we delegate the main part to the helper
    # function in the try block, catch any exceptions, then release the lock.
    xfrin_recorder.increment(zone_name)
    exception = None
    try:
        __process_xfrin(server, zone_name, rrclass, db_file,
                        shutdown_event, master_addrinfo, check_soa, tsig_key,
                        request_type, conn_class)
    except Exception as ex:
        # don't log it until we complete decrement().
        exception = ex
    xfrin_recorder.decrement(zone_name)

    if exception is not None:
        typestr = "AXFR" if request_type == RRType.AXFR() else "IXFR"
        logger.error(XFRIN_XFR_PROCESS_FAILURE, typestr, zone_name.to_text(),
                     str(rrclass), str(exception))

class XfrinRecorder:
    def __init__(self):
        self._lock = threading.Lock()
        self._zones = []

    def increment(self, zone_name):
        self._lock.acquire()
        self._zones.append(zone_name)
        self._lock.release()

    def decrement(self, zone_name):
        self._lock.acquire()
        if zone_name in self._zones:
            self._zones.remove(zone_name)
        self._lock.release()

    def xfrin_in_progress(self, zone_name):
        self._lock.acquire()
        ret = zone_name in self._zones
        self._lock.release()
        return ret

    def count(self):
        self._lock.acquire()
        ret = len(self._zones)
        self._lock.release()
        return ret

class ZoneInfo:
    def __init__(self, config_data, module_cc):
        """Creates a zone_info with the config data element as
           specified by the 'zones' list in xfrin.spec. Module_cc is
           needed to get the defaults from the specification"""
        self._module_cc = module_cc
        self.set_name(config_data.get('name'))
        self.set_master_addr(config_data.get('master_addr'))

        self.set_master_port(config_data.get('master_port'))
        self.set_zone_class(config_data.get('class'))
        self.set_tsig_key(config_data.get('tsig_key'))
        self.set_use_ixfr(config_data.get('use_ixfr'))

    def set_name(self, name_str):
        """Set the name for this zone given a name string.
           Raises XfrinZoneInfoException if name_str is None or if it
           cannot be parsed."""
        if name_str is None:
            raise XfrinZoneInfoException("Configuration zones list "
                                         "element does not contain "
                                         "'name' attribute")
        else:
            self.name = _check_zone_name(name_str)

    def set_master_addr(self, master_addr_str):
        """Set the master address for this zone given an IP address
           string. Raises XfrinZoneInfoException if master_addr_str is
           None or if it cannot be parsed."""
        if master_addr_str is None:
            raise XfrinZoneInfoException("master address missing from config data")
        else:
            try:
                self.master_addr = isc.net.parse.addr_parse(master_addr_str)
            except ValueError:
                logger.error(XFRIN_BAD_MASTER_ADDR_FORMAT, master_addr_str)
                errmsg = "bad format for zone's master: " + master_addr_str
                raise XfrinZoneInfoException(errmsg)

    def set_master_port(self, master_port_str):
        """Set the master port given a port number string. If
           master_port_str is None, the default from the specification
           for this module will be used. Raises XfrinZoneInfoException if
           the string contains an invalid port number"""
        if master_port_str is None:
            self.master_port = self._module_cc.get_default_value("zones/master_port")
        else:
            try:
                self.master_port = isc.net.parse.port_parse(master_port_str)
            except ValueError:
                logger.error(XFRIN_BAD_MASTER_PORT_FORMAT, master_port_str)
                errmsg = "bad format for zone's master port: " + master_port_str
                raise XfrinZoneInfoException(errmsg)

    def set_zone_class(self, zone_class_str):
        """Set the zone class given an RR class str (e.g. "IN"). If
           zone_class_str is None, it will default to what is specified
           in the specification file for this module. Raises
           XfrinZoneInfoException if the string cannot be parsed."""
        # TODO: remove _str
        self.class_str = zone_class_str or self._module_cc.get_default_value("zones/class")
        if zone_class_str == None:
            #TODO rrclass->zone_class
            self.rrclass = RRClass(self._module_cc.get_default_value("zones/class"))
        else:
            try:
                self.rrclass = RRClass(zone_class_str)
            except InvalidRRClass:
                logger.error(XFRIN_BAD_ZONE_CLASS, zone_class_str)
                errmsg = "invalid zone class: " + zone_class_str
                raise XfrinZoneInfoException(errmsg)

    def set_tsig_key(self, tsig_key_str):
        """Set the tsig_key for this zone, given a TSIG key string
           representation. If tsig_key_str is None, no TSIG key will
           be set. Raises XfrinZoneInfoException if tsig_key_str cannot
           be parsed."""
        if tsig_key_str is None:
            self.tsig_key = None
        else:
            try:
                self.tsig_key = TSIGKey(tsig_key_str)
            except InvalidParameter as ipe:
                logger.error(XFRIN_BAD_TSIG_KEY_STRING, tsig_key_str)
                errmsg = "bad TSIG key string: " + tsig_key_str
                raise XfrinZoneInfoException(errmsg)

    def set_use_ixfr(self, use_ixfr):
        """Set use_ixfr. If set to True, it will use
           IXFR for incoming transfers. If set to False, it will use AXFR.
           At this moment there is no automatic fallback"""
        # TODO: http://bind10.isc.org/ticket/1279
        if use_ixfr is None:
            self.use_ixfr = \
                self._module_cc.get_default_value("zones/use_ixfr")
        else:
            self.use_ixfr = use_ixfr

    def get_master_addr_info(self):
        return (self.master_addr.family, socket.SOCK_STREAM,
                (str(self.master_addr), self.master_port))

def _do_auth_loadzone(server, zone_name, zone_class):
    msg = auth_loadzone_command(server._module_cc, zone_name, zone_class)
    if msg is not None:
        param = msg['command'][1]
        logger.debug(DBG_XFRIN_TRACE, XFRIN_AUTH_LOADZONE, param["origin"],
                     param["class"], param["datasrc"])
        seq = server._send_cc_session.group_sendmsg(msg, AUTH_MODULE_NAME)
        answer, env = server._send_cc_session.group_recvmsg(False, seq)

class Xfrin:
    def __init__(self):
        self._max_transfers_in = 10
        self._zones = {}
        # This is a set of (zone/class) tuples (both as strings),
        # representing the in-memory zones maintaned by Xfrin. It
        # is used to trigger Auth/in-memory so that it reloads
        # zones when they have been transfered in
        self._memory_zones = set()
        self._cc_setup()
        self.recorder = XfrinRecorder()
        self._shutdown_event = threading.Event()

    def _cc_setup(self):
        '''This method is used only as part of initialization, but is
        implemented separately for convenience of unit tests; by letting
        the test code override this method we can test most of this class
        without requiring a command channel.'''
        # Create one session for sending command to other modules, because the
        # listening session will block the send operation.
        self._send_cc_session = isc.cc.Session()
        self._module_cc = isc.config.ModuleCCSession(SPECFILE_LOCATION,
                                              self.config_handler,
                                              self.command_handler)
        self._module_cc.start()
        config_data = self._module_cc.get_full_config()
        self.config_handler(config_data)
        self._module_cc.add_remote_config(AUTH_SPECFILE_LOCATION,
                                          self._auth_config_handler)

    def _cc_check_command(self):
        '''This is a straightforward wrapper for cc.check_command,
        but provided as a separate method for the convenience
        of unit tests.'''
        self._module_cc.check_command(False)

    def _get_zone_info(self, name, rrclass):
        """Returns the ZoneInfo object containing the configured data
           for the given zone name. If the zone name did not have any
           data, returns None"""
        return self._zones.get((name.to_text(), rrclass.to_text()))

    def _add_zone_info(self, zone_info):
        """Add the zone info. Raises a XfrinZoneInfoException if a zone
           with the same name and class is already configured"""
        key = (zone_info.name.to_text(), zone_info.class_str)
        if key in self._zones:
            raise XfrinZoneInfoException("zone " + str(key) +
                                       " configured multiple times")
        self._zones[key] = zone_info

    def _clear_zone_info(self):
        self._zones = {}

    def config_handler(self, new_config):
        # backup all config data (should there be a problem in the new
        # data)
        old_max_transfers_in = self._max_transfers_in
        old_zones = self._zones

        self._max_transfers_in = new_config.get("transfers_in") or self._max_transfers_in

        if 'zones' in new_config:
            self._clear_zone_info()
            for zone_config in new_config.get('zones'):
                try:
                    zone_info = ZoneInfo(zone_config, self._module_cc)
                    self._add_zone_info(zone_info)
                except XfrinZoneInfoException as xce:
                    self._zones = old_zones
                    self._max_transfers_in = old_max_transfers_in
                    return create_answer(1, str(xce))

        return create_answer(0)

    def _auth_config_handler(self, new_config, config_data):
        # Config handler for changes in Auth configuration
        self._set_db_file()
        self._set_memory_zones(new_config, config_data)

    def _clear_memory_zones(self):
        """Clears the memory_zones set; called before processing the
           changed list of memory datasource zones that have file type
           sqlite3"""
        self._memory_zones.clear()

    def _is_memory_zone(self, zone_name_str, zone_class_str):
        """Returns true if the given zone/class combination is configured
           in the in-memory datasource of the Auth process with file type
           'sqlite3'.
           Note: this method is not thread-safe. We are considering
           changing the threaded model here, but if we do not, take
           care in accessing and updating the memory zone set (or add
           locks)
        """
        # Normalize them first, if either conversion fails, return false
        # (they won't be in the set anyway)
        try:
            zone_name_str = Name(zone_name_str).to_text().lower()
            zone_class_str = RRClass(zone_class_str).to_text()
        except Exception:
            return False
        return (zone_name_str, zone_class_str) in self._memory_zones

    def _set_memory_zones(self, new_config, config_data):
        """Part of the _auth_config_handler function, keeps an internal set
           of zones in the datasources config subset that have 'sqlite3' as
           their file type.
           Note: this method is not thread-safe. We are considering
           changing the threaded model here, but if we do not, take
           care in accessing and updating the memory zone set (or add
           locks)
        """
        # walk through the data and collect the memory zones
        # If this causes any exception, assume we were passed bad data
        # and keep the original set
        new_memory_zones = set()
        try:
            if "datasources" in new_config:
                for datasource in new_config["datasources"]:
                    if "class" in datasource:
                        ds_class = RRClass(datasource["class"])
                    else:
                        # Get the default
                        ds_class = RRClass(config_data.get_default_value(
                                               "datasources/class"))
                    if datasource["type"] == "memory":
                        for zone in datasource["zones"]:
                            if "filetype" in zone and \
                               zone["filetype"] == "sqlite3":
                                zone_name = Name(zone["origin"])
                                zone_name_str = zone_name.to_text().lower()
                                new_memory_zones.add((zone_name_str,
                                                      ds_class.to_text()))
                # Ok, we can use the data, update our list
                self._memory_zones = new_memory_zones
        except Exception:
            # Something is wrong with the data. If this data even reached us,
            # we cannot do more than assume the real module has logged and
            # reported an error. Keep the old set.
            return

    def shutdown(self):
        ''' shutdown the xfrin process. the thread which is doing xfrin should be
        terminated.
        '''
        self._module_cc.remove_remote_config(AUTH_SPECFILE_LOCATION)
        self._module_cc.send_stopping()
        self._shutdown_event.set()
        main_thread = threading.currentThread()
        for th in threading.enumerate():
            if th is main_thread:
                continue
            th.join()

    def command_handler(self, command, args):
        answer = create_answer(0)
        try:
            if command == 'shutdown':
                self._shutdown_event.set()
            elif command == 'notify' or command == REFRESH_FROM_ZONEMGR:
                # Xfrin receives the refresh/notify command from zone manager.
                # notify command maybe has the parameters which
                # specify the notifyfrom address and port, according the RFC1996, zone
                # transfer should starts first from the notifyfrom, but now, let 'TODO' it.
                # (using the value now, while we can only set one master address, would be
                # a security hole. Once we add the ability to have multiple master addresses,
                # we should check if it matches one of them, and then use it.)
                (zone_name, rrclass) = self._parse_zone_name_and_class(args)
                zone_str = format_zone_str(zone_name, rrclass)
                zone_info = self._get_zone_info(zone_name, rrclass)
                notify_addr = self._parse_master_and_port(args, zone_name,
                                                          rrclass)
                if zone_info is None:
                    # TODO what to do? no info known about zone. defaults?
                    errmsg = "Got notification to retransfer unknown zone " + zone_str
                    logger.info(XFRIN_RETRANSFER_UNKNOWN_ZONE, zone_str)
                    answer = create_answer(1, errmsg)
                else:
                    request_type = RRType.AXFR()
                    if zone_info.use_ixfr:
                        request_type = RRType.IXFR()
                    master_addr = zone_info.get_master_addr_info()
                    if notify_addr[0] == master_addr[0] and\
                       notify_addr[2] == master_addr[2]:
                        ret = self.xfrin_start(zone_name,
                                               rrclass,
                                               self._get_db_file(),
                                               master_addr,
                                               zone_info.tsig_key, request_type,
                                               True)
                        answer = create_answer(ret[0], ret[1])
                    else:
                        notify_addr_str = format_addrinfo(notify_addr)
                        master_addr_str = format_addrinfo(master_addr)
                        errmsg = "Got notification for " + zone_str\
                               + "from unknown address: " + notify_addr_str;
                        logger.info(XFRIN_NOTIFY_UNKNOWN_MASTER, zone_str,
                                    notify_addr_str, master_addr_str)
                        answer = create_answer(1, errmsg)

            elif command == 'retransfer' or command == 'refresh':
                # Xfrin receives the retransfer/refresh from cmdctl(sent by bindctl).
                # If the command has specified master address, do transfer from the
                # master address, or else do transfer from the configured masters.
                (zone_name, rrclass) = self._parse_zone_name_and_class(args)
                master_addr = self._parse_master_and_port(args, zone_name,
                                                          rrclass)
                zone_info = self._get_zone_info(zone_name, rrclass)
                tsig_key = None
                request_type = RRType.AXFR()
                if zone_info:
                    tsig_key = zone_info.tsig_key
                    if zone_info.use_ixfr:
                        request_type = RRType.IXFR()
                db_file = args.get('db_file') or self._get_db_file()
                ret = self.xfrin_start(zone_name,
                                       rrclass,
                                       db_file,
                                       master_addr,
                                       tsig_key, request_type,
                                       (False if command == 'retransfer' else True))
                answer = create_answer(ret[0], ret[1])

            else:
                answer = create_answer(1, 'unknown command: ' + command)
        except XfrinException as err:
            logger.error(XFRIN_COMMAND_ERROR, command, str(err))
            answer = create_answer(1, str(err))
        return answer

    def _parse_zone_name_and_class(self, args):
        zone_name_str = args.get('zone_name')
        if zone_name_str is None:
            raise XfrinException('zone name should be provided')

        return (_check_zone_name(zone_name_str), _check_zone_class(args.get('zone_class')))

    def _parse_master_and_port(self, args, zone_name, zone_class):
        """
        Return tuple (family, socktype, sockaddr) for address and port in given
        args dict.
        IPv4 and IPv6 are the only supported addresses now, so sockaddr will be
        (address, port). The socktype is socket.SOCK_STREAM for now.
        """
        # check if we have configured info about this zone, in case
        # port or master are not specified
        zone_info = self._get_zone_info(zone_name, zone_class)

        addr_str = args.get('master')
        if addr_str is None:
            if zone_info is not None:
                addr = zone_info.master_addr
            else:
                raise XfrinException("Master address not given or "
                                     "configured for " + zone_name.to_text())
        else:
            try:
                addr = isc.net.parse.addr_parse(addr_str)
            except ValueError as err:
                raise XfrinException("failed to resolve master address %s: %s" %
                                     (addr_str, str(err)))

        port_str = args.get('port')
        if port_str is None:
            if zone_info is not None:
                port = zone_info.master_port
            else:
                port = DEFAULT_MASTER_PORT
        else:
            try:
                port = isc.net.parse.port_parse(port_str)
            except ValueError as err:
                raise XfrinException("failed to parse port=%s: %s" %
                                     (port_str, str(err)))

        return (addr.family, socket.SOCK_STREAM, (str(addr), port))

    def _get_db_file(self):
        return self._db_file

    def _set_db_file(self):
        db_file, is_default =\
            self._module_cc.get_remote_config_value(AUTH_MODULE_NAME, "database_file")
        if is_default and "B10_FROM_BUILD" in os.environ:
            # override the local database setting if it is default and we
            # are running from the source tree
            # This should be hidden inside the data source library and/or
            # done as a configuration, and this special case should be gone).
            db_file = os.environ["B10_FROM_BUILD"] + os.sep +\
                      "bind10_zones.sqlite3"
        self._db_file = db_file

    def publish_xfrin_news(self, zone_name, zone_class, xfr_result):
        '''Send command to xfrout/zone manager module.
        If xfrin has finished successfully for one zone, tell the good
        news(command: zone_new_data_ready) to zone manager and xfrout.
        if xfrin failed, just tell the bad news to zone manager, so that
        it can reset the refresh timer for that zone. '''
        param = {'zone_name': zone_name.to_text(),
                 'zone_class': zone_class.to_text()}
        if xfr_result == XFRIN_OK:
            _do_auth_loadzone(self, zone_name, zone_class)
            msg = create_command(notify_out.ZONE_NEW_DATA_READY_CMD, param)
            # catch the exception, in case msgq has been killed.
            try:
                seq = self._send_cc_session.group_sendmsg(msg,
                                                          XFROUT_MODULE_NAME)
                try:
                    answer, env = self._send_cc_session.group_recvmsg(False,
                                                                      seq)
                except isc.cc.session.SessionTimeout:
                    pass        # for now we just ignore the failure
                seq = self._send_cc_session.group_sendmsg(msg, ZONE_MANAGER_MODULE_NAME)
                try:
                    answer, env = self._send_cc_session.group_recvmsg(False,
                                                                      seq)
                except isc.cc.session.SessionTimeout:
                    pass        # for now we just ignore the failure
            except socket.error as err:
                logger.error(XFRIN_MSGQ_SEND_ERROR, XFROUT_MODULE_NAME, ZONE_MANAGER_MODULE_NAME)

        else:
            msg = create_command(notify_out.ZONE_XFRIN_FAILED, param)
            # catch the exception, in case msgq has been killed.
            try:
                seq = self._send_cc_session.group_sendmsg(msg, ZONE_MANAGER_MODULE_NAME)
                try:
                    answer, env = self._send_cc_session.group_recvmsg(False,
                                                                      seq)
                except isc.cc.session.SessionTimeout:
                    pass        # for now we just ignore the failure
            except socket.error as err:
                logger.error(XFRIN_MSGQ_SEND_ERROR_ZONE_MANAGER, ZONE_MANAGER_MODULE_NAME)

    def startup(self):
        logger.debug(DBG_PROCESS, XFRIN_STARTED)
        while not self._shutdown_event.is_set():
            self._cc_check_command()

    def xfrin_start(self, zone_name, rrclass, db_file, master_addrinfo,
                    tsig_key, request_type, check_soa=True):
        if "pydnspp" not in sys.modules:
            return (1, "xfrin failed, can't load dns message python library: 'pydnspp'")

        # check max_transfer_in, else return quota error
        if self.recorder.count() >= self._max_transfers_in:
            return (1, 'xfrin quota error')

        if self.recorder.xfrin_in_progress(zone_name):
            return (1, 'zone xfrin is in progress')

        xfrin_thread = threading.Thread(target = process_xfrin,
                                        args = (self,
                                                self.recorder,
                                                zone_name,
                                                rrclass,
                                                db_file,
                                                self._shutdown_event,
                                                master_addrinfo, check_soa,
                                                tsig_key, request_type))

        xfrin_thread.start()
        return (0, 'zone xfrin is started')


xfrind = None

def signal_handler(signal, frame):
    if xfrind:
        xfrind.shutdown()
    sys.exit(0)

def set_signal_handler():
    signal.signal(signal.SIGTERM, signal_handler)
    signal.signal(signal.SIGINT, signal_handler)

def set_cmd_options(parser):
    parser.add_option("-v", "--verbose", dest="verbose", action="store_true",
            help="This option is obsolete and has no effect.")

def main(xfrin_class, use_signal=True):
    """The main loop of the Xfrin daemon.

    @param xfrin_class: A class of the Xfrin object.  This is normally Xfrin,
    but can be a subclass of it for customization.
    @param use_signal: True if this process should catch signals.  This is
    normally True, but may be disabled when this function is called in a
    testing context."""
    global xfrind

    try:
        parser = OptionParser(version = __version__)
        set_cmd_options(parser)
        (options, args) = parser.parse_args()

        if use_signal:
            set_signal_handler()
        xfrind = xfrin_class()
        xfrind.startup()
    except KeyboardInterrupt:
        logger.info(XFRIN_STOPPED_BY_KEYBOARD)
    except isc.cc.session.SessionError as e:
        logger.error(XFRIN_CC_SESSION_ERROR, str(e))
    except Exception as e:
        logger.error(XFRIN_UNKNOWN_ERROR, str(e))

    if xfrind:
        xfrind.shutdown()

if __name__ == '__main__':
    main(Xfrin)