Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

4 files changed, 174 insertions, 266 deletions

diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 7302f290b93d..2a63ffc250a1 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -1,31 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/anomaly.h
- * Based on:
- * Author:
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
@@ -43,44 +21,44 @@
 #endif
 
 /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
 		|| defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-                            slot1 and store of a P register in slot 2 is not
-                            supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
-                            every corresponding match */
+			  * every corresponding match */
 #define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
-                            Channel DMA stops */
+			  * Channel DMA stops */
 #define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
-                            registers. */
+			  * registers. */
 #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
-                            upper bits*/
+			  * upper bits*/
 #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
 #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
-                            syncs */
+			  * syncs */
 #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
-                            functional */
+			  * functional */
 #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
-                            state */
+			  * state */
 #define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-                            VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
 #define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
-                            an edge is detected may clear interrupt */
+			  * an edge is detected may clear interrupt */
 #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
-                            DMA system instability */
+			  * DMA system instability */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-                            not restored */
+			  * not restored */
 #define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
-                            control */
+			  * control */
 #define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
-                            killed in a particular stage*/
+			  * killed in a particular stage*/
 #define ANOMALY_05000311 /* Erroneous flag pin operations under specific
-			    sequences */
+			  * sequences */
 #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
-			    registers are interrupted */
+			  * registers are interrupted */
 #define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer  */
 #define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
 			  *  Next System MMR Access */
@@ -91,90 +69,90 @@
 /* These issues only occur on 0.3 or 0.4 BF533 */
 #if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
-                            updated at the same time. */
+			  * updated at the same time. */
 #define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
-        		    Cache Fill can be corrupted after or during
-                            Instruction DMA if certain core stalls exist */
+			  * Cache Fill can be corrupted after or during
+			  * Instruction DMA if certain core stalls exist */
 #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
-                            Purpose TX or RX modes */
+			  * Purpose TX or RX modes */
 #define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
-                            preceding memory read */
+			  * preceding memory read */
 #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
-                            inactive channels in certain conditions */
+			  * inactive channels in certain conditions */
 #define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
-                            situation */
+			  * situation */
 #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
 #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
 #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
-                            data*/
+			  * data*/
 #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
-                            Differences in certain Conditions */
+			  * Differences in certain Conditions */
 #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
 #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
-                            hardware reset */
+			  * hardware reset */
 #define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
-                            IDLE around a Change of Control causes
-                            unpredictable results */
+			  * IDLE around a Change of Control causes
+			  * unpredictable results */
 #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
-                            shadow of a conditional branch */
+			  * shadow of a conditional branch */
 #define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
-                            errors */
+			  * errors */
 #define ANOMALY_05000253 /* Maximum external clock speed for Timers */
 #define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
-                            interrupt not functional */
+			  * interrupt not functional */
 #define ANOMALY_05000257 /* An interrupt or exception during short Hardware
-                            loops may cause the instruction fetch unit to
-                            malfunction */
+			  * loops may cause the instruction fetch unit to
+			  * malfunction */
 #define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
-                            the ICPLB Data registers differ */
+			  * the ICPLB Data registers differ */
 #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
 #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
 #define ANOMALY_05000262 /* Stores to data cache may be lost */
 #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
 #define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
-                            instruction will cause an infinite stall in the
-                            second to last instruction in a hardware loop */
+			  * instruction will cause an infinite stall in the
+			  * second to last instruction in a hardware loop */
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-                            SPORT external receive and transmit clocks. */
+			  * SPORT external receive and transmit clocks. */
 #define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
-                            internal voltage regulator (VDDint) to increase. */
+			  * internal voltage regulator (VDDint) to increase. */
 #define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
-                            internal voltage regulator (VDDint) to decrease */
+			  * internal voltage regulator (VDDint) to decrease */
 #endif /* issues only occur on 0.3 or 0.4 BF533 */
 
 /* These issues are only on 0.4 silicon */
 #if (defined(CONFIG_BF_REV_0_4))
 #define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
 #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
-                            (TDM) */
+			  * (TDM) */
 #endif /* issues are only on 0.4 silicon */
 
 /* These issues are only on 0.3 silicon */
 #if defined(CONFIG_BF_REV_0_3)
 #define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
-                            External Frame Syncs */
+			  * External Frame Syncs */
 #define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
-                            Instruction or Data Fetches, or by Fetches at the
-                            boundary of reserved memory space */
+			  * Instruction or Data Fetches, or by Fetches at the
+			  * boundary of reserved memory space */
 #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
-                            when polarity setting is changed */
+			  * when polarity setting is changed */
 #define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
-                            corruption */
+			  * corruption */
 #define ANOMALY_05000199 /* DMA current address shows wrong value during carry
-                            fix */
+			  * fix */
 #define ANOMALY_05000201 /* Receive frame sync not ignored during active
-                            frames in sport MCM */
+			  * frames in sport MCM */
 #define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
-                            stopping */
+			  * stopping */
 #if defined(CONFIG_BF533)
 #define ANOMALY_05000204 /* Incorrect data read with write-through cache and
-                            allocate cache lines on reads only mode */
+			  * allocate cache lines on reads only mode */
 #endif /* CONFIG_BF533 */
 #define ANOMALY_05000207 /* Recovery from "brown-out" condition */
 #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
-                            instructions */
+			  * instructions */
 #define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
-                            Sync Transmit Mode */
+			  * Sync Transmit Mode */
 #define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
 #endif /* only on 0.3 silicon */
 
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 4453e614c3b1..5c5e33dec5f1 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -1,33 +1,9 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf537/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * File: include/asm-blackfin/mach-bf537/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
@@ -46,37 +22,37 @@
 
 #if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-                            slot1 and store of a P register in slot 2 is not
-                            supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
-                            Channel DMA stops */
+			  * Channel DMA stops */
 #define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
-                            registers. */
+			  * registers. */
 #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
-                            upper bits*/
+			  * upper bits*/
 #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
-                            syncs */
+			  * syncs */
 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
 #define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
-                            Changed */
+			  * Changed */
 #endif
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-                            SPORT external receive and transmit clocks. */
+			  * SPORT external receive and transmit clocks. */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-                            VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
 #define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
-                            an edge is detected may clear interrupt */
+			  * an edge is detected may clear interrupt */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-                            not restored */
+			  * not restored */
 #define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
-                            control */
+			  * control */
 #define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
-                            killed in a particular stage*/
+			  * killed in a particular stage*/
 #define ANOMALY_05000310 /* False hardware errors caused by fetches at the
 			  *  boundary of reserved memory */
 #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
-			    registers are interrupted */
+			  * registers are interrupted */
 #define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
 #define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
 			  *  received properly */
@@ -84,41 +60,41 @@
 
 #if defined(CONFIG_BF_REV_0_2)
 #define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
-                            IDLE around a Change of Control causes
-                            unpredictable results */
+			  * IDLE around a Change of Control causes
+			  * unpredictable results */
 #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
-                            (TDM) */
+			  * (TDM) */
 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
 #define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
 #endif
 #define ANOMALY_05000253 /* Maximum external clock speed for Timers */
 #define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
-                            interrupt not functional */
+			  * interrupt not functional */
 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
 #define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
 #endif
 #define ANOMALY_05000257 /* An interrupt or exception during short Hardware
-                            loops may cause the instruction fetch unit to
-                            malfunction */
+			  * loops may cause the instruction fetch unit to
+			  * malfunction */
 #define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
-                            the ICPLB Data registers differ */
+			  * the ICPLB Data registers differ */
 #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
 #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
 #define ANOMALY_05000262 /* Stores to data cache may be lost */
 #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
 #define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
-                            instruction will cause an infinite stall in the
-                            second to last instruction in a hardware loop */
+			  * instruction will cause an infinite stall in the
+			  * second to last instruction in a hardware loop */
 #define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
-                            and non-zero DEB_TRAFFIC_PERIOD value */
+			  * and non-zero DEB_TRAFFIC_PERIOD value */
 #define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
-                            internal voltage regulator (VDDint) to decrease */
+			  * internal voltage regulator (VDDint) to decrease */
 #define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
-                            an edge is detected may clear interrupt */
+			  * an edge is detected may clear interrupt */
 #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
-                            DMA system instability */
+			  * DMA system instability */
 #define ANOMALY_05000280 /* SPI Master boot mode does not work well with
-                            Atmel Dataflash devices */
+			  * Atmel Dataflash devices */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
 			  *  is not restored */
 #define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
@@ -134,6 +110,6 @@
 			  *  mode */
 #define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
 			  *  status No Carrier */
-#endif  /* CONFIG_BF_REV_0_2 */
+#endif /* CONFIG_BF_REV_0_2 */
 
 #endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index aca1d4ba145c..964a1c0ea637 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -1,74 +1,51 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf548/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
+
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-			    slot1 and store of a P register in slot 2 is not
-			    supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
-			    Channel DMA stops */
+			  * Channel DMA stops */
 #define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
-			    registers. */
+			  * registers. */
 #define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
-			    Shadow of a Conditional Branch */
+			  * Shadow of a Conditional Branch */
 #define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
-			    interrupt not functional */
+			  * interrupt not functional */
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-			    SPORT external receive and transmit clocks. */
+			  * SPORT external receive and transmit clocks. */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-			    VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-			    not restored */
+			  * not restored */
 #define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
-			    Boundary of Reserved Memory */
+			  * Boundary of Reserved Memory */
 #define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
-			    LC Registers Are Interrupted */
+			  * LC Registers Are Interrupted */
 #define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
 #define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
-			    the USB FIFO Simultaneously */
+			  * the USB FIFO Simultaneously */
 #define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
-			    function */
+			  * function */
 #define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
-			    */
+			  * */
 #define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
 #define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
-			    Skew */
+			  * Skew */
 #define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
 #define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
-			    of Host DMA Port */
+			  * of Host DMA Port */
 #define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
-			    Allowed Configuration on Host DMA Port */
+			  * Allowed Configuration on Host DMA Port */
 #define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
 
 #endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index f5b32d66517d..5a7986a83bee 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -1,36 +1,13 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ *  - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -42,142 +19,142 @@
 #endif
 
 /* Issues that are common to 0.5 and  0.3 silicon */
-#if  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-                            slot1 and store of a P register in slot 2 is not
-                            supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
-                            updated at the same time. */
+			  * updated at the same time. */
 #define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
-                            memory locations */
+			  * memory locations */
 #define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
-                            registers */
+			  * registers */
 #define ANOMALY_05000127 /* Signbits instruction not functional under certain
-                            conditions */
+			  * conditions */
 #define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
 #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
-                            upper bits */
+			  * upper bits */
 #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
 #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
-                            syncs */
+			  * syncs */
 #define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
-                            and higher devices */
+			  * and higher devices */
 #define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
 #define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
 #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
-                            functional */
+			  * functional */
 #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
-                            shadow of a conditional branch */
+			  * shadow of a conditional branch */
 #define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
-                            may cause bad instruction fetches */
+			  * may cause bad instruction fetches */
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-                            external SPORT TX and RX clocks */
+			  * external SPORT TX and RX clocks */
 #define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
 #define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
-                            voltage regulator (VDDint) to increase */
+			  * voltage regulator (VDDint) to increase */
 #define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
-                            voltage regulator (VDDint) to decrease */
+			  * voltage regulator (VDDint) to decrease */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-                            VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000274 /* Data cache write back to external synchronous memory
-                            may be lost */
+			  * may be lost */
 #define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
 #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
-			    registers are interrupted */
+			  * registers are interrupted */
 
 #endif /*  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
 
-#if  (defined(CONFIG_BF_REV_0_5))
+#if (defined(CONFIG_BF_REV_0_5))
 #define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
-                            mode with external clock */
+			  * mode with external clock */
 #define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
-                            using IMDMA */
+			  * using IMDMA */
 #endif
 
-#if  (defined(CONFIG_BF_REV_0_3))
+#if (defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
-                            Mode with 0 Frame Syncs */
+			  * Mode with 0 Frame Syncs */
 #define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
 #define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
-                            cache data writes */
+			  * cache data writes */
 #define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
 #define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
 #define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
 #define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
-                            accumulator saturation */
+			  * accumulator saturation */
 #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
-                            Purpose TX or RX modes */
+			  * Purpose TX or RX modes */
 #define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
-                            registers */
+			  * registers */
 #define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
-                            External Frame Syncs */
+			  * External Frame Syncs */
 #define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
 #define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
-                            (not a meaningful mode) */
+			  * (not a meaningful mode) */
 #define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
-                            Placement in Memory */
+			  * Placement in Memory */
 #define ANOMALY_05000189 /* False Protection Exception */
 #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
-                            when polarity setting is changed */
+			  * when polarity setting is changed */
 #define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
-                            corruption */
+			  * corruption */
 #define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
-                            memory read */
+			  * memory read */
 #define ANOMALY_05000199 /* DMA current address shows wrong value during carry
-                            fix */
+			  * fix */
 #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
-                            inactive channels in certain conditions */
+			  * inactive channels in certain conditions */
 #define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
-                            situation */
+			  * situation */
 #define ANOMALY_05000204 /* Incorrect data read with write-through cache and
-                            allocate cache lines on reads only mode */
+			  * allocate cache lines on reads only mode */
 #define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
-                            stopping */
+			  * stopping */
 #define ANOMALY_05000207 /* Recovery from "brown-out" condition */
 #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
-                            instructions */
+			  * instructions */
 #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
 #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
-                            state */
+			  * state */
 #define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
-                            Non-Cached On-Chip L2 Memory */
+			  * Non-Cached On-Chip L2 Memory */
 #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
 #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
-                            data */
+			  * data */
 #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
-                            Differences in certain Conditions */
+			  * Differences in certain Conditions */
 #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
 #define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
-                            multichannel mode */
+			  * multichannel mode */
 #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
-                            hardware reset */
+			  * hardware reset */
 #define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
-                            Control causes failures */
+			  * Control causes failures */
 #define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
 #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
-                            (TDM) mode in certain conditions */
+			  * (TDM) mode in certain conditions */
 #define ANOMALY_05000251 /* Exception not generated for MMR accesses in
-                            reserved region */
+			  * reserved region */
 #define ANOMALY_05000253 /* Maximum external clock speed for Timers */
 #define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
-                            of the ICPLB Data registers differ */
+			  * of the ICPLB Data registers differ */
 #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
 #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
 #define ANOMALY_05000262 /* Stores to data cache may be lost */
 #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
-                            exception */
+			  * exception */
 #define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
-                            to last instruction in hardware loop */
+			  * to last instruction in hardware loop */
 #define ANOMALY_05000276 /* Timing requirements change for External Frame
-                            Sync PPI Modes with non-zero PPI_DELAY */
+			  * Sync PPI Modes with non-zero PPI_DELAY */
 #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
-                            DMA system instability */
+			  * DMA system instability */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-                            not restored */
+			  * not restored */
 #define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
-                            in a particular stage */
+			  * in a particular stage */
 #define ANOMALY_05000287 /* A read will receive incorrect data under certain
-                            conditions */
+			  * conditions */
 #define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
 #endif