scsi: osst: kill obsolete driver

The osst driver is becoming obsolete, as the manufacturer went out of
business ages ago, and the maintainer has no means of testing any
improvements anymore.  Plus these days flash drives are cheaper and offer a
higher capacity.  So drop it completely.

Cc: Willem Riede <osst@riede.org>
Signed-off-by: Hannes Reinece <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

9 files changed, 3 insertions, 7126 deletions

diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt
deleted file mode 100644
index 00c8ebb2fd18..000000000000
--- a/Documentation/scsi/osst.txt
+++ /dev/null
@@ -1,218 +0,0 @@
-README file for the osst driver
-===============================
-(w) Kurt Garloff <garloff@suse.de> 12/2000
-
-This file describes the osst driver as of version 0.8.x/0.9.x, the released
-version of the osst driver.
-It is intended to help advanced users to understand the role of osst and to
-get them started using (and maybe debugging) it.
-It won't address issues like "How do I compile a kernel?" or "How do I load
-a module?", as these are too basic.
-Once the OnStream got merged into the official kernel, the distro makers
-will provide the OnStream support for those who are not familiar with
-hacking their kernels.
-
-
-Purpose
--------
-The osst driver was developed, because the standard SCSI tape driver in
-Linux, st, does not support the OnStream SC-x0 SCSI tape. The st is not to
-blame for that, as the OnStream tape drives do not support the standard SCSI
-command set for Serial Access Storage Devices (SASDs), which basically
-corresponds to the QIC-157 spec.
-Nevertheless, the OnStream tapes are nice pieces of hardware and therefore
-the osst driver has been written to make these tape devs supported by Linux.
-The driver is free software. It's released under the GNU GPL and planned to
-be integrated into the mainstream kernel.
-
-
-Implementation
---------------
-The osst is a new high-level SCSI driver, just like st, sr, sd and sg. It
-can be compiled into the kernel or loaded as a module.
-As it represents a new device, it got assigned a new device node: /dev/osstX
-are character devices with major no 206 and minor numbers like the /dev/stX
-devices. If those are not present, you may create them by calling
-Makedevs.sh as root (see below).
-The driver started being a copy of st and as such, the osst devices'
-behavior looks very much the same as st to the userspace applications.
-
-
-History
--------
-In the first place, osst shared its identity very much with st. That meant
-that it used the same kernel structures and the same device node as st.
-So you could only have either of them being present in the kernel. This has
-been fixed by registering an own device, now.
-st and osst can coexist, each only accessing the devices it can support by
-themselves.
-
-
-Installation
-------------
-osst got integrated into the linux kernel. Select it during kernel
-configuration as module or compile statically into the kernel.
-Compile your kernel and install the modules.
-
-Now, your osst driver is inside the kernel or available as a module,
-depending on your choice during kernel config. You may still need to create
-the device nodes by calling the Makedevs.sh script (see below) manually.
-
-To load your module, you may use the command 
-modprobe osst
-as root. dmesg should show you, whether your OnStream tapes have been
-recognized.
-
-If you want to have the module autoloaded on access to /dev/osst, you may
-add something like
-alias char-major-206 osst
-to a file under /etc/modprobe.d/ directory.
-
-You may find it convenient to create a symbolic link 
-ln -s nosst0 /dev/tape
-to make programs assuming a default name of /dev/tape more convenient to
-use.
-
-The device nodes for osst have to be created. Use the Makedevs.sh script
-attached to this file.
-
-
-Using it
---------
-You may use the OnStream tape driver with your standard backup software,
-which may be tar, cpio, amanda, arkeia, BRU, Lone Tar, ...
-by specifying /dev/(n)osst0 as the tape device to use or using the above
-symlink trick. The IOCTLs to control tape operation are also mostly
-supported and you may try the mt (or mt_st) program to jump between
-filemarks, eject the tape, ...
-
-There's one limitation: You need to use a block size of 32kB.
-
-(This limitation is worked on and will be fixed in version 0.8.8 of
- this driver.)
-
-If you just want to get started with standard software, here is an example
-for creating and restoring a full backup:
-# Backup
-tar cvf - / --exclude /proc | buffer -s 32k -m 24M -B -t -o /dev/nosst0
-# Restore
-buffer -s 32k -m 8M -B -t -i /dev/osst0 | tar xvf - -C /
-
-The buffer command has been used to buffer the data before it goes to the
-tape (or the file system) in order to smooth out the data stream and prevent
-the tape from needing to stop and rewind. The OnStream does have an internal
-buffer and a variable speed which help this, but especially on writing, the
-buffering still proves useful in most cases. It also pads the data to
-guarantees the block size of 32k. (Otherwise you may pass the -b64 option to
-tar.)
-Expect something like 1.8MB/s for the SC-x0 drives and 0.9MB/s for the DI-30.
-The USB drive will give you about 0.7MB/s.
-On a fast machine, you may profit from software data compression (z flag for
-tar).
-
-
-USB and IDE
------------
-Via the SCSI emulation layers usb-storage and ide-scsi, you can also use the
-osst driver to drive the USB-30 and the DI-30 drives. (Unfortunately, there
-is no such layer for the parallel port, otherwise the DP-30 would work as
-well.) For the USB support, you need the latest 2.4.0-test kernels and the 
-latest usb-storage driver from 
-http://www.linux-usb.org/
-http://sourceforge.net/cvs/?group_id=3581
-
-Note that the ide-tape driver as of 1.16f uses a slightly outdated on-tape
-format and therefore is not completely interoperable with osst tapes.
-
-The ADR-x0 line is fully SCSI-2 compliant and is supported by st, not osst.
-The on-tape format is supposed to be compatible with the one used by osst.
-
-
-Feedback and updates
---------------------
-The driver development is coordinated through a mailing list
-<osst@linux1.onstream.nl>
-a CVS repository and some web pages. 
-The tester's pages which contain recent news and updated drivers to download
-can be found on
-http://sourceforge.net/projects/osst/
-
-If you find any problems, please have a look at the tester's page in order
-to see whether the problem is already known and solved. Otherwise, please
-report it to the mailing list. Your feedback is welcome. (This holds also
-for reports of successful usage, of course.) 
-In case of trouble, please do always provide the following info:
-* driver and kernel version used (see syslog)
-* driver messages (syslog)
-* SCSI config and OnStream Firmware (/proc/scsi/scsi)
-* description of error. Is it reproducible?
-* software and commands used
-
-You may subscribe to the mailing list, BTW, it's a majordomo list.
-
-
-Status
-------
-0.8.0 was the first widespread BETA release. Since then a lot of reports
-have been sent, but mostly reported success or only minor trouble.
-All the issues have been addressed.
-Check the web pages for more info about the current developments.
-0.9.x is the tree for the 2.3/2.4 kernel.
-
-
-Acknowledgments
-----------------
-The driver has been started by making a copy of Kai Makisara's st driver.
-Most of the development has been done by Willem Riede. The presence of the
-userspace program osg (onstreamsg) from Terry Hardie has been rather
-helpful. The same holds for Gadi Oxman's ide-tape support for the DI-30.
-I did add some patches to those drivers as well and coordinated things a
-little bit. 
-Note that most of them did mostly spend their spare time for the creation of
-this driver.
-The people from OnStream, especially Jack Bombeeck did support this project
-and always tried to answer HW or FW related questions. Furthermore, he
-pushed the FW developers to do the right things.
-SuSE did support this project by allowing me to work on it during my working
-time for them and by integrating the driver into their distro.
-
-More people did help by sending useful comments. Sorry to those who have
-been forgotten. Thanks to all the GNU/FSF and Linux developers who made this
-platform such an interesting, nice and stable platform.
-Thanks go to those who tested the drivers and did send useful reports. Your
-help is needed!
-
-
-Makedevs.sh
------------
-#!/bin/sh
-# Script to create OnStream SC-x0 device nodes (major 206)
-# Usage: Makedevs.sh [nos [path to dev]]
-# $Id: README.osst.kernel,v 1.4 2000/12/20 14:13:15 garloff Exp $
-major=206
-nrs=4
-dir=/dev
-test -z "$1" || nrs=$1
-test -z "$2" || dir=$2
-declare -i nr
-nr=0
-test -d $dir || mkdir -p $dir
-while test $nr -lt $nrs; do
-  mknod $dir/osst$nr c $major $nr
-  chown 0.disk $dir/osst$nr; chmod 660 $dir/osst$nr;
-  mknod $dir/nosst$nr c $major $[nr+128]
-  chown 0.disk $dir/nosst$nr; chmod 660 $dir/nosst$nr;
-  mknod $dir/osst${nr}l c $major $[nr+32]
-  chown 0.disk $dir/osst${nr}l; chmod 660 $dir/osst${nr}l;
-  mknod $dir/nosst${nr}l c $major $[nr+160]
-  chown 0.disk $dir/nosst${nr}l; chmod 660 $dir/nosst${nr}l;
-  mknod $dir/osst${nr}m c $major $[nr+64]
-  chown 0.disk $dir/osst${nr}m; chmod 660 $dir/osst${nr}m;
-  mknod $dir/nosst${nr}m c $major $[nr+192]
-  chown 0.disk $dir/nosst${nr}m; chmod 660 $dir/nosst${nr}m;
-  mknod $dir/osst${nr}a c $major $[nr+96]
-  chown 0.disk $dir/osst${nr}a; chmod 660 $dir/osst${nr}a;
-  mknod $dir/nosst${nr}a c $major $[nr+224]
-  chown 0.disk $dir/nosst${nr}a; chmod 660 $dir/nosst${nr}a;
-  let nr+=1
-done
diff --git a/MAINTAINERS b/MAINTAINERS
index 5cfbea4ce575..adfb7ffb40ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11662,16 +11662,6 @@ S:	Maintained
 F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
-ONSTREAM SCSI TAPE DRIVER
-M:	Willem Riede <osst@riede.org>
-L:	osst-users@lists.sourceforge.net
-L:	linux-scsi@vger.kernel.org
-S:	Maintained
-F:	Documentation/scsi/osst.txt
-F:	drivers/scsi/osst.*
-F:	drivers/scsi/osst_*.h
-F:	drivers/scsi/st.h
-
 OP-TEE DRIVER
 M:	Jens Wiklander <jens.wiklander@linaro.org>
 S:	Maintained
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d528018e6fa8..d81edb6ae9e3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -98,28 +98,6 @@ config CHR_DEV_ST
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/scsi/scsi.txt>. The module will be called st.
 
-config CHR_DEV_OSST
-	tristate "SCSI OnStream SC-x0 tape support"
-	depends on SCSI
-	---help---
-	  The OnStream SC-x0 SCSI tape drives cannot be driven by the
-	  standard st driver, but instead need this special osst driver and
-	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage,
-	  you may be able to drive the USB-x0 and DI-x0 drives as well.
-	  Note that there is also a second generation of OnStream
-	  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
-	  tapes (QIC-157) and can be driven by the standard driver st.
-	  For more information, you may have a look at the SCSI-HOWTO
-	  <http://www.tldp.org/docs.html#howto>  and
-	  <file:Documentation/scsi/osst.txt>  in the kernel source.
-	  More info on the OnStream driver may be found on
-	  <http://sourceforge.net/projects/osst/>
-	  Please also have a look at the standard st docu, as most of it
-	  applies to osst as well.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called osst.
-
 config BLK_DEV_SR
 	tristate "SCSI CDROM support"
 	depends on SCSI && BLK_DEV
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 8826111fdf4a..f69ee35af2c8 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -143,7 +143,6 @@ obj-$(CONFIG_SCSI_WD719X)	+= wd719x.o
 obj-$(CONFIG_ARM)		+= arm/
 
 obj-$(CONFIG_CHR_DEV_ST)	+= st.o
-obj-$(CONFIG_CHR_DEV_OSST)	+= osst.o
 obj-$(CONFIG_BLK_DEV_SD)	+= sd_mod.o
 obj-$(CONFIG_BLK_DEV_SR)	+= sr_mod.o
 obj-$(CONFIG_CHR_DEV_SG)	+= sg.o
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
deleted file mode 100644
index 4bad54463eb2..000000000000
--- a/drivers/scsi/osst.c
+++ /dev/null
@@ -1,6107 +0,0 @@
-/*
-  SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
-  file Documentation/scsi/st.txt for more information.
-
-  History:
-
-  OnStream SCSI Tape support (osst) cloned from st.c by
-  Willem Riede (osst@riede.org) Feb 2000
-  Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000
-
-  Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
-  Contribution and ideas from several people including (in alphabetical
-  order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer,
-  Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale.
-
-  Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede
-	 email osst@riede.org
-
-  $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
-
-  Microscopic alterations - Rik Ling, 2000/12/21
-  Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara
-  Some small formal changes - aeb, 950809
-*/
-
-static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $";
-static const char * osst_version = "0.99.4";
-
-/* The "failure to reconnect" firmware bug */
-#define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/
-#define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/
-#define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7)
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/sched/signal.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/mtio.h>
-#include <linux/ioctl.h>
-#include <linux/fcntl.h>
-#include <linux/spinlock.h>
-#include <linux/vmalloc.h>
-#include <linux/blkdev.h>
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-#include <asm/dma.h>
-
-/* The driver prints some debugging information on the console if DEBUG
-   is defined and non-zero. */
-#define DEBUG 0
-
-/* The message level for the debug messages is currently set to KERN_NOTICE
-   so that people can easily see the messages. Later when the debugging messages
-   in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
-#define OSST_DEB_MSG  KERN_NOTICE
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_driver.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_ioctl.h>
-
-#define ST_KILOBYTE 1024
-
-#include "st.h"
-#include "osst.h"
-#include "osst_options.h"
-#include "osst_detect.h"
-
-static DEFINE_MUTEX(osst_int_mutex);
-static int max_dev = 0;
-static int write_threshold_kbs = 0;
-static int max_sg_segs = 0;
-
-#ifdef MODULE
-MODULE_AUTHOR("Willem Riede");
-MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
-MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
-
-module_param(max_dev, int, 0444);
-MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
-
-module_param(write_threshold_kbs, int, 0644);
-MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)");
-
-module_param(max_sg_segs, int, 0644);
-MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)");
-#else
-static struct osst_dev_parm {
-       char   *name;
-       int    *val;
-} parms[] __initdata = {
-       { "max_dev",             &max_dev             },
-       { "write_threshold_kbs", &write_threshold_kbs },
-       { "max_sg_segs",         &max_sg_segs         }
-};
-#endif
-
-/* Some default definitions have been moved to osst_options.h */
-#define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE)
-#define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE)
-
-/* The buffer size should fit into the 24 bits for length in the
-   6-byte SCSI read and write commands. */
-#if OSST_BUFFER_SIZE >= (2 << 24 - 1)
-#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
-#endif
-
-#if DEBUG
-static int debugging = 1;
-/* uncomment define below to test error recovery */
-// #define OSST_INJECT_ERRORS 1 
-#endif
-
-/* Do not retry! The drive firmware already retries when appropriate,
-   and when it tries to tell us something, we had better listen... */
-#define MAX_RETRIES 0
-
-#define NO_TAPE  NOT_READY
-
-#define OSST_WAIT_POSITION_COMPLETE   (HZ > 200 ? HZ / 200 : 1)
-#define OSST_WAIT_WRITE_COMPLETE      (HZ / 12)
-#define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2)
-	
-#define OSST_TIMEOUT (200 * HZ)
-#define OSST_LONG_TIMEOUT (1800 * HZ)
-
-#define TAPE_NR(x) (iminor(x) & ((1 << ST_MODE_SHIFT)-1))
-#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
-#define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0)
-#define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1))
-
-/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
-   24 bits) */
-#define SET_DENS_AND_BLK 0x10001
-
-static int osst_buffer_size       = OSST_BUFFER_SIZE;
-static int osst_write_threshold   = OSST_WRITE_THRESHOLD;
-static int osst_max_sg_segs       = OSST_MAX_SG;
-static int osst_max_dev           = OSST_MAX_TAPES;
-static int osst_nr_dev;
-
-static struct osst_tape **os_scsi_tapes = NULL;
-static DEFINE_RWLOCK(os_scsi_tapes_lock);
-
-static int modes_defined = 0;
-
-static struct osst_buffer *new_tape_buffer(int, int, int);
-static int enlarge_buffer(struct osst_buffer *, int);
-static void normalize_buffer(struct osst_buffer *);
-static int append_to_buffer(const char __user *, struct osst_buffer *, int);
-static int from_buffer(struct osst_buffer *, char __user *, int);
-static int osst_zero_buffer_tail(struct osst_buffer *);
-static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *);
-static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *);
-
-static int osst_probe(struct device *);
-static int osst_remove(struct device *);
-
-static struct scsi_driver osst_template = {
-	.gendrv = {
-		.name		=  "osst",
-		.owner		= THIS_MODULE,
-		.probe		= osst_probe,
-		.remove		= osst_remove,
-	}
-};
-
-static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt,
-			    unsigned int cmd_in, unsigned long arg);
-
-static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip);
-
-static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt);
-
-static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt);
-
-static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending);
-
-static inline char *tape_name(struct osst_tape *tape)
-{
-	return tape->drive->disk_name;
-}
-
-/* Routines that handle the interaction with mid-layer SCSI routines */
-
-
-/* Normalize Sense */
-static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s)
-{
-	const u8 *ucp;
-	const u8 *sense = SRpnt->sense;
-
-	s->have_sense = scsi_normalize_sense(SRpnt->sense,
-				SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
-	s->flags = 0;
-
-	if (s->have_sense) {
-		s->deferred = 0;
-		s->remainder_valid =
-			scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
-		switch (sense[0] & 0x7f) {
-		case 0x71:
-			s->deferred = 1;
-			/* fall through */
-		case 0x70:
-			s->fixed_format = 1;
-			s->flags = sense[2] & 0xe0;
-			break;
-		case 0x73:
-			s->deferred = 1;
-			/* fall through */
-		case 0x72:
-			s->fixed_format = 0;
-			ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
-			s->flags = ucp ? (ucp[3] & 0xe0) : 0;
-			break;
-		}
-	}
-}
-
-/* Convert the result to success code */
-static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt)
-{
-	char *name = tape_name(STp);
-	int result = SRpnt->result;
-	u8 * sense = SRpnt->sense, scode;
-#if DEBUG
-	const char *stp;
-#endif
-	struct st_cmdstatus *cmdstatp;
-
-	if (!result)
-		return 0;
-
-	cmdstatp = &STp->buffer->cmdstat;
-	osst_analyze_sense(SRpnt, cmdstatp);
-
-	if (cmdstatp->have_sense)
-		scode = STp->buffer->cmdstat.sense_hdr.sense_key;
-	else
-		scode = 0;
-#if DEBUG
-	if (debugging) {
-		printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n",
-		   name, result,
-		   SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
-		   SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
-		if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n",
-				  name, scode, sense[12], sense[13]);
-		if (cmdstatp->have_sense)
-			__scsi_print_sense(STp->device, name,
-					   SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
-	}
-	else
-#endif
-	if (cmdstatp->have_sense && (
-		 scode != NO_SENSE &&
-		 scode != RECOVERED_ERROR &&
-/*      	 scode != UNIT_ATTENTION && */
-		 scode != BLANK_CHECK &&
-		 scode != VOLUME_OVERFLOW &&
-		 SRpnt->cmd[0] != MODE_SENSE &&
-		 SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */
-		if (cmdstatp->have_sense) {
-			printk(KERN_WARNING "%s:W: Command with sense data:\n", name);
-			__scsi_print_sense(STp->device, name,
-					   SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
-		}
-		else {
-			static	int	notyetprinted = 1;
-
-			printk(KERN_WARNING
-			     "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n",
-			     name, result, driver_byte(result),
-			     host_byte(result));
-			if (notyetprinted) {
-				notyetprinted = 0;
-				printk(KERN_INFO
-					"%s:I: This warning may be caused by your scsi controller,\n", name);
-				printk(KERN_INFO
-					"%s:I: it has been reported with some Buslogic cards.\n", name);
-			}
-		}
-	}
-	STp->pos_unknown |= STp->device->was_reset;
-
-	if (cmdstatp->have_sense && scode == RECOVERED_ERROR) {
-		STp->recover_count++;
-		STp->recover_erreg++;
-#if DEBUG
-		if (debugging) {
-			if (SRpnt->cmd[0] == READ_6)
-				stp = "read";
-			else if (SRpnt->cmd[0] == WRITE_6)
-				stp = "write";
-			else
-				stp = "ioctl";
-			printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp,
-					     STp->recover_count);
-		}
-#endif
-		if ((sense[2] & 0xe0) == 0)
-			return 0;
-	}
-	return (-EIO);
-}
-
-
-/* Wakeup from interrupt */
-static void osst_end_async(struct request *req, blk_status_t status)
-{
-	struct scsi_request *rq = scsi_req(req);
-	struct osst_request *SRpnt = req->end_io_data;
-	struct osst_tape *STp = SRpnt->stp;
-	struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
-
-	STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result;
-#if DEBUG
-	STp->write_pending = 0;
-#endif
-	if (rq->sense_len)
-		memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE);
-	if (SRpnt->waiting)
-		complete(SRpnt->waiting);
-
-	if (SRpnt->bio) {
-		kfree(mdata->pages);
-		blk_rq_unmap_user(SRpnt->bio);
-	}
-
-	blk_put_request(req);
-}
-
-/* osst_request memory management */
-static struct osst_request *osst_allocate_request(void)
-{
-	return kzalloc(sizeof(struct osst_request), GFP_KERNEL);
-}
-
-static void osst_release_request(struct osst_request *streq)
-{
-	kfree(streq);
-}
-
-static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd,
-			int cmd_len, int data_direction, void *buffer, unsigned bufflen,
-			int use_sg, int timeout, int retries)
-{
-	struct request *req;
-	struct scsi_request *rq;
-	struct page **pages = NULL;
-	struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
-
-	int err = 0;
-	int write = (data_direction == DMA_TO_DEVICE);
-
-	req = blk_get_request(SRpnt->stp->device->request_queue,
-			write ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0);
-	if (IS_ERR(req))
-		return DRIVER_ERROR << 24;
-
-	rq = scsi_req(req);
-	req->rq_flags |= RQF_QUIET;
-
-	SRpnt->bio = NULL;
-
-	if (use_sg) {
-		struct scatterlist *sg, *sgl = (struct scatterlist *)buffer;
-		int i;
-
-		pages = kcalloc(use_sg, sizeof(struct page *), GFP_KERNEL);
-		if (!pages)
-			goto free_req;
-
-		for_each_sg(sgl, sg, use_sg, i)
-			pages[i] = sg_page(sg);
-
-		mdata->null_mapped = 1;
-
-		mdata->page_order = get_order(sgl[0].length);
-		mdata->nr_entries =
-			DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order);
-		mdata->offset = 0;
-
-		err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL);
-		if (err) {
-			kfree(pages);
-			goto free_req;
-		}
-		SRpnt->bio = req->bio;
-		mdata->pages = pages;
-
-	} else if (bufflen) {
-		err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL);
-		if (err)
-			goto free_req;
-	}
-
-	rq->cmd_len = cmd_len;
-	memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
-	memcpy(rq->cmd, cmd, rq->cmd_len);
-	req->timeout = timeout;
-	rq->retries = retries;
-	req->end_io_data = SRpnt;
-
-	blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async);
-	return 0;
-free_req:
-	blk_put_request(req);
-	return DRIVER_ERROR << 24;
-}
-
-/* Do the scsi command. Waits until command performed if do_wait is true.
-   Otherwise osst_write_behind_check() is used to check that the command
-   has finished. */
-static	struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp, 
-	unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait)
-{
-	unsigned char *bp;
-	unsigned short use_sg;
-#ifdef OSST_INJECT_ERRORS
-	static   int   inject = 0;
-	static   int   repeat = 0;
-#endif
-	struct completion *waiting;
-
-	/* if async, make sure there's no command outstanding */
-	if (!do_wait && ((STp->buffer)->last_SRpnt)) {
-		printk(KERN_ERR "%s: Async command already active.\n",
-		       tape_name(STp));
-		if (signal_pending(current))
-			(STp->buffer)->syscall_result = (-EINTR);
-		else
-			(STp->buffer)->syscall_result = (-EBUSY);
-		return NULL;
-	}
-
-	if (SRpnt == NULL) {
-		SRpnt = osst_allocate_request();
-		if (SRpnt == NULL) {
-			printk(KERN_ERR "%s: Can't allocate SCSI request.\n",
-				     tape_name(STp));
-			if (signal_pending(current))
-				(STp->buffer)->syscall_result = (-EINTR);
-			else
-				(STp->buffer)->syscall_result = (-EBUSY);
-			return NULL;
-		}
-		SRpnt->stp = STp;
-	}
-
-	/* If async IO, set last_SRpnt. This ptr tells write_behind_check
-	   which IO is outstanding. It's nulled out when the IO completes. */
-	if (!do_wait)
-		(STp->buffer)->last_SRpnt = SRpnt;
-
-	waiting = &STp->wait;
-	init_completion(waiting);
-	SRpnt->waiting = waiting;
-
-	use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0;
-	if (use_sg) {
-		bp = (char *)&(STp->buffer->sg[0]);
-		if (STp->buffer->sg_segs < use_sg)
-			use_sg = STp->buffer->sg_segs;
-	}
-	else
-		bp = (STp->buffer)->b_data;
-
-	memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
-	STp->buffer->cmdstat.have_sense = 0;
-	STp->buffer->syscall_result = 0;
-
-	if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes,
-			 use_sg, timeout, retries))
-		/* could not allocate the buffer or request was too large */
-		(STp->buffer)->syscall_result = (-EBUSY);
-	else if (do_wait) {
-		wait_for_completion(waiting);
-		SRpnt->waiting = NULL;
-		STp->buffer->syscall_result = osst_chk_result(STp, SRpnt);
-#ifdef OSST_INJECT_ERRORS
-		if (STp->buffer->syscall_result == 0 &&
-		    cmd[0] == READ_6 &&
-		    cmd[4] && 
-		    ( (++ inject % 83) == 29  ||
-		      (STp->first_frame_position == 240 
-			         /* or STp->read_error_frame to fail again on the block calculated above */ &&
-				 ++repeat < 3))) {
-			printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp));
-			STp->buffer->last_result_fatal = 1;
-		}
-#endif
-	}
-	return SRpnt;
-}
-
-
-/* Handle the write-behind checking (downs the semaphore) */
-static void osst_write_behind_check(struct osst_tape *STp)
-{
-	struct osst_buffer * STbuffer;
-
-	STbuffer = STp->buffer;
-
-#if DEBUG
-	if (STp->write_pending)
-		STp->nbr_waits++;
-	else
-		STp->nbr_finished++;
-#endif
-	wait_for_completion(&(STp->wait));
-	STp->buffer->last_SRpnt->waiting = NULL;
-
-	STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt);
-
-	if (STp->buffer->syscall_result)
-		STp->buffer->syscall_result =
-			osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1);
-	else
-		STp->first_frame_position++;
-
-	osst_release_request(STp->buffer->last_SRpnt);
-
-	if (STbuffer->writing < STbuffer->buffer_bytes)
-		printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n");
-
-	STbuffer->last_SRpnt = NULL;
-	STbuffer->buffer_bytes -= STbuffer->writing;
-	STbuffer->writing = 0;
-
-	return;
-}
-
-
-
-/* Onstream specific Routines */
-/*
- * Initialize the OnStream AUX
- */
-static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number,
-					 int logical_blk_num, int blk_sz, int blk_cnt)
-{
-	os_aux_t       *aux = STp->buffer->aux;
-	os_partition_t *par = &aux->partition;
-	os_dat_t       *dat = &aux->dat;
-
-	if (STp->raw) return;
-
-	memset(aux, 0, sizeof(*aux));
-	aux->format_id = htonl(0);
-	memcpy(aux->application_sig, "LIN4", 4);
-	aux->hdwr = htonl(0);
-	aux->frame_type = frame_type;
-
-	switch (frame_type) {
-	  case	OS_FRAME_TYPE_HEADER:
-		aux->update_frame_cntr    = htonl(STp->update_frame_cntr);
-		par->partition_num        = OS_CONFIG_PARTITION;
-		par->par_desc_ver         = OS_PARTITION_VERSION;
-		par->wrt_pass_cntr        = htons(0xffff);
-		/* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */
-		par->first_frame_ppos     = htonl(0);
-		par->last_frame_ppos      = htonl(0xbb7);
-		aux->frame_seq_num        = htonl(0);
-		aux->logical_blk_num_high = htonl(0);
-		aux->logical_blk_num      = htonl(0);
-		aux->next_mark_ppos       = htonl(STp->first_mark_ppos);
-		break;
-	  case	OS_FRAME_TYPE_DATA:
-	  case	OS_FRAME_TYPE_MARKER:
-		dat->dat_sz = 8;
-		dat->reserved1 = 0;
-		dat->entry_cnt = 1;
-		dat->reserved3 = 0;
-		dat->dat_list[0].blk_sz   = htonl(blk_sz);
-		dat->dat_list[0].blk_cnt  = htons(blk_cnt);
-		dat->dat_list[0].flags    = frame_type==OS_FRAME_TYPE_MARKER?
-							OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA;
-		dat->dat_list[0].reserved = 0;
-		/* fall through */
-	  case	OS_FRAME_TYPE_EOD:
-		aux->update_frame_cntr    = htonl(0);
-		par->partition_num        = OS_DATA_PARTITION;
-		par->par_desc_ver         = OS_PARTITION_VERSION;
-		par->wrt_pass_cntr        = htons(STp->wrt_pass_cntr);
-		par->first_frame_ppos     = htonl(STp->first_data_ppos);
-		par->last_frame_ppos      = htonl(STp->capacity);
-		aux->frame_seq_num        = htonl(frame_seq_number);
-		aux->logical_blk_num_high = htonl(0);
-		aux->logical_blk_num      = htonl(logical_blk_num);
-		break;
-	  default: ; /* probably FILL */
-	}
-	aux->filemark_cnt = htonl(STp->filemark_cnt);
-	aux->phys_fm = htonl(0xffffffff);
-	aux->last_mark_ppos = htonl(STp->last_mark_ppos);
-	aux->last_mark_lbn  = htonl(STp->last_mark_lbn);
-}
-
-/*
- * Verify that we have the correct tape frame
- */
-static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet)
-{
-	char               * name = tape_name(STp);
-	os_aux_t           * aux  = STp->buffer->aux;
-	os_partition_t     * par  = &(aux->partition);
-	struct st_partstat * STps = &(STp->ps[STp->partition]);
-	unsigned int	     blk_cnt, blk_sz, i;
-
-	if (STp->raw) {
-		if (STp->buffer->syscall_result) {
-			for (i=0; i < STp->buffer->sg_segs; i++)
-				memset(page_address(sg_page(&STp->buffer->sg[i])),
-				       0, STp->buffer->sg[i].length);
-			strcpy(STp->buffer->b_data, "READ ERROR ON FRAME");
-                } else
-			STp->buffer->buffer_bytes = OS_FRAME_SIZE;
-		return 1;
-	}
-	if (STp->buffer->syscall_result) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name);
-#endif
-		return 0;
-	}
-	if (ntohl(aux->format_id) != 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id));
-#endif
-		goto err_out;
-	}
-	if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 &&
-	    (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name);
-#endif
-		goto err_out;
-	}
-	if (par->partition_num != OS_DATA_PARTITION) {
-		if (!STp->linux_media || STp->linux_media_version != 2) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n",
-					    name, par->partition_num);
-#endif
-			goto err_out;
-		}
-	}
-	if (par->par_desc_ver != OS_PARTITION_VERSION) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver);
-#endif
-		goto err_out;
-	}
-	if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n", 
-				    name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr);
-#endif
-		goto err_out;
-	}
-	if (aux->frame_type != OS_FRAME_TYPE_DATA &&
-	    aux->frame_type != OS_FRAME_TYPE_EOD &&
-	    aux->frame_type != OS_FRAME_TYPE_MARKER) {
-		if (!quiet) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
-#endif
-		}
-		goto err_out;
-	}
-	if (aux->frame_type == OS_FRAME_TYPE_EOD &&
-	    STp->first_frame_position < STp->eod_frame_ppos) {
-		printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name,
-				 STp->first_frame_position);
-		goto err_out;
-	}
-        if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
-		if (!quiet) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n", 
-					    name, ntohl(aux->frame_seq_num), frame_seq_number);
-#endif
-		}
-		goto err_out;
-	}
-	if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
-		STps->eof = ST_FM_HIT;
-
-		i = ntohl(aux->filemark_cnt);
-		if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt ||
-		    STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name,
-				  STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected",
-				  i, STp->first_frame_position - 1);
-#endif
-			STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1);
-			if (i >= STp->filemark_cnt)
-				 STp->filemark_cnt = i+1;
-		}
-	}
-	if (aux->frame_type == OS_FRAME_TYPE_EOD) {
-		STps->eof = ST_EOD_1;
-		STp->frame_in_buffer = 1;
-	}
-	if (aux->frame_type == OS_FRAME_TYPE_DATA) {
-                blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt);
-		blk_sz  = ntohl(aux->dat.dat_list[0].blk_sz);
-		STp->buffer->buffer_bytes = blk_cnt * blk_sz;
-		STp->buffer->read_pointer = 0;
-		STp->frame_in_buffer = 1;
-
-		/* See what block size was used to write file */
-		if (STp->block_size != blk_sz && blk_sz > 0) {
-			printk(KERN_INFO
-	    	"%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n",
-       				name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k',
-				STp->block_size<1024?STp->block_size:STp->block_size/1024,
-				STp->block_size<1024?'b':'k');
-			STp->block_size            = blk_sz;
-			STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz;
-		}
-		STps->eof = ST_NOEOF;
-	}
-        STp->frame_seq_number = ntohl(aux->frame_seq_num);
-	STp->logical_blk_num  = ntohl(aux->logical_blk_num);
-	return 1;
-
-err_out:
-	if (STp->read_error_frame == 0)
-		STp->read_error_frame = STp->first_frame_position - 1;
-	return 0;
-}
-
-/*
- * Wait for the unit to become Ready
- */
-static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt,
-				 unsigned timeout, int initial_delay)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	unsigned long		startwait = jiffies;
-#if DEBUG
-	int			dbg  = debugging;
-	char    	      * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name);
-#endif
-
-	if (initial_delay > 0)
-		msleep(jiffies_to_msecs(initial_delay));
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = TEST_UNIT_READY;
-
-	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	*aSRpnt = SRpnt;
-	if (!SRpnt) return (-EBUSY);
-
-	while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
-	       (( SRpnt->sense[2]  == 2 && SRpnt->sense[12] == 4    &&
-		 (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)    ) ||
-		( SRpnt->sense[2]  == 6 && SRpnt->sense[12] == 0x28 &&
-		  SRpnt->sense[13] == 0                                        )  )) {
-#if DEBUG
-	    if (debugging) {
-		printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name);
-		printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
-		debugging = 0;
-	    }
-#endif
-	    msleep(100);
-
-	    memset(cmd, 0, MAX_COMMAND_SIZE);
-	    cmd[0] = TEST_UNIT_READY;
-
-	    SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	}
-	*aSRpnt = SRpnt;
-#if DEBUG
-	debugging = dbg;
-#endif
-	if ( STp->buffer->syscall_result &&
-	     osst_write_error_recovery(STp, aSRpnt, 0) ) {
-#if DEBUG
-	    printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name);
-	    printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
-			STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
-			SRpnt->sense[12], SRpnt->sense[13]);
-#endif
-	    return (-EIO);
-	}
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name);
-#endif
-	return 0;
-}
-
-/*
- * Wait for a tape to be inserted in the unit
- */
-static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	unsigned long		startwait = jiffies;
-#if DEBUG
-	int			dbg = debugging;
-	char    	      * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name);
-#endif
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = TEST_UNIT_READY;
-
-	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	*aSRpnt = SRpnt;
-	if (!SRpnt) return (-EBUSY);
-
-	while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
-		SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0  ) {
-#if DEBUG
-	    if (debugging) {
-		printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name);
-		printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
-		debugging = 0;
-	    }
-#endif
-	    msleep(100);
-
-	    memset(cmd, 0, MAX_COMMAND_SIZE);
-	    cmd[0] = TEST_UNIT_READY;
-
-	    SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	}
-	*aSRpnt = SRpnt;
-#if DEBUG
-	debugging = dbg;
-#endif
-	if ( STp->buffer->syscall_result     && SRpnt->sense[2]  != 2 &&
-	     SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) {
-#if DEBUG
-	    printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name);
-	    printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
-			STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
-			SRpnt->sense[12], SRpnt->sense[13]);
-#endif
-	    return 0;
-	}
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name);
-#endif
-	return 1;
-}
-
-static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame)
-{
-	int	retval;
-
-	osst_wait_ready(STp, aSRpnt, 15 * 60, 0);			/* TODO - can this catch a write error? */
-	retval = osst_set_frame_position(STp, aSRpnt, frame, 0);
-	if (retval) return (retval);
-	osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE);
-	return (osst_get_frame_position(STp, aSRpnt));
-}
-
-/*
- * Wait for write(s) to complete
- */
-static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	int			result = 0;
-	int			delay  = OSST_WAIT_WRITE_COMPLETE;
-#if DEBUG
-	char		      * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name);
-#endif
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = WRITE_FILEMARKS;
-	cmd[1] = 1;
-
-	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	*aSRpnt = SRpnt;
-	if (!SRpnt) return (-EBUSY);
-	if (STp->buffer->syscall_result) {
-		if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) {
-			if (SRpnt->sense[13] == 8) {
-				delay = OSST_WAIT_LONG_WRITE_COMPLETE;
-			}
-		} else
-			result = osst_write_error_recovery(STp, aSRpnt, 0);
-	}
-	result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay);
-	STp->ps[STp->partition].rw = OS_WRITING_COMPLETE;
-
-	return (result);
-}
-
-#define OSST_POLL_PER_SEC 10
-static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to)
-{
-	unsigned long	startwait = jiffies;
-	char	      * name      = tape_name(STp);
-#if DEBUG
-	char	   notyetprinted  = 1;
-#endif
-	if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING)
-		printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name);
-
-	while (time_before (jiffies, startwait + to*HZ))
-	{ 
-		int result;
-		result = osst_get_frame_position(STp, aSRpnt);
-		if (result == -EIO)
-			if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0)
-				return 0;	/* successful recovery leaves drive ready for frame */
-		if (result < 0) break;
-		if (STp->first_frame_position == curr &&
-		    ((minlast < 0 &&
-		      (signed)STp->last_frame_position > (signed)curr + minlast) ||
-		     (minlast >= 0 && STp->cur_frames > minlast)
-		    ) && result >= 0)
-		{
-#if DEBUG			
-			if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC))
-				printk (OSST_DEB_MSG
-					"%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n",
-					name, curr, curr+minlast, STp->first_frame_position,
-					STp->last_frame_position, STp->cur_frames,
-					result, (jiffies-startwait)/HZ, 
-					(((jiffies-startwait)%HZ)*10)/HZ);
-#endif
-			return 0;
-		}
-#if DEBUG
-		if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted)
-		{
-			printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n",
-				name, curr, curr+minlast, STp->first_frame_position,
-				STp->last_frame_position, STp->cur_frames, result);
-			notyetprinted--;
-		}
-#endif
-		msleep(1000 / OSST_POLL_PER_SEC);
-	}
-#if DEBUG
-	printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n",
-		name, curr, curr+minlast, STp->first_frame_position,
-		STp->last_frame_position, STp->cur_frames,
-		(jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ);
-#endif	
-	return -EBUSY;
-}
-
-static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing)
-{
-	struct osst_request   * SRpnt;
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	unsigned long   	startwait = jiffies;
-	int			retval    = 1;
-        char		      * name      = tape_name(STp);
-                                                                                                                                
-	if (writing) {
-		char	mybuf[24];
-		char  * olddata = STp->buffer->b_data;
-		int	oldsize = STp->buffer->buffer_size;
-
-		/* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */
-
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = WRITE_FILEMARKS;
-		cmd[1] = 1;
-		SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
-								MAX_RETRIES, 1);
-
-		while (retval && time_before (jiffies, startwait + 5*60*HZ)) {
-
-			if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) {
-
-				/* some failure - not just not-ready */
-				retval = osst_write_error_recovery(STp, aSRpnt, 0);
-				break;
-			}
-			schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC);
-
-			STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
-			memset(cmd, 0, MAX_COMMAND_SIZE);
-			cmd[0] = READ_POSITION;
-
-			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout,
-										MAX_RETRIES, 1);
-
-			retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 );
-			STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
-		}
-		if (retval)
-			printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name);
-	} else
-		/* TODO - figure out which error conditions can be handled */
-		if (STp->buffer->syscall_result)
-			printk(KERN_WARNING
-				"%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name,
-					(*aSRpnt)->sense[ 2] & 0x0f,
-					(*aSRpnt)->sense[12],
-					(*aSRpnt)->sense[13]);
-
-	return retval;
-}
-
-/*
- * Read the next OnStream tape frame at the current location
- */
-static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	int			retval = 0;
-#if DEBUG
-	os_aux_t	      * aux    = STp->buffer->aux;
-	char		      * name   = tape_name(STp);
-#endif
-
-	if (STp->poll)
-		if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout))
-			retval = osst_recover_wait_frame(STp, aSRpnt, 0);
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = READ_6;
-	cmd[1] = 1;
-	cmd[4] = 1;
-
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name);
-#endif
-	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
-				      STp->timeout, MAX_RETRIES, 1);
-	*aSRpnt = SRpnt;
-	if (!SRpnt)
-		return (-EBUSY);
-
-	if ((STp->buffer)->syscall_result) {
-	    retval = 1;
-	    if (STp->read_error_frame == 0) {
-		STp->read_error_frame = STp->first_frame_position;
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame);
-#endif
-	    }
-#if DEBUG
-	    if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
-		   name,
-		   SRpnt->sense[0], SRpnt->sense[1],
-		   SRpnt->sense[2], SRpnt->sense[3],
-		   SRpnt->sense[4], SRpnt->sense[5],
-		   SRpnt->sense[6], SRpnt->sense[7]);
-#endif
-	}
-	else
-	    STp->first_frame_position++;
-#if DEBUG
-	if (debugging) {
-	   char sig[8]; int i;
-	   for (i=0;i<4;i++)
-		   sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i];
-	   sig[4] = '\0';
-	   printk(OSST_DEB_MSG 
-		"%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig,
-			ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr),
-			aux->frame_type==1?"EOD":aux->frame_type==2?"MARK":
-			aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL", 
-			ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
-			ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) );
-	   if (aux->frame_type==2)
-		printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name,
-			ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn));
-	   printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval);
-	}
-#endif
-	return (retval);
-}
-
-static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	struct st_partstat    * STps   = &(STp->ps[STp->partition]);
-	struct osst_request   * SRpnt  ;
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	int			retval = 0;
-	char		      * name   = tape_name(STp);
-
-	if (STps->rw != ST_READING) {         /* Initialize read operation */
-		if (STps->rw == ST_WRITING || STp->dirty) {
-			STp->write_type = OS_WRITE_DATA;
-                        osst_flush_write_buffer(STp, aSRpnt);
-			osst_flush_drive_buffer(STp, aSRpnt);
-		}
-		STps->rw = ST_READING;
-		STp->frame_in_buffer = 0;
-
-		/*
-		 *      Issue a read 0 command to get the OnStream drive
-                 *      read frames into its buffer.
-		 */
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = READ_6;
-		cmd[1] = 1;
-
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name);
-#endif
-		SRpnt   = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-		*aSRpnt = SRpnt;
-		if ((retval = STp->buffer->syscall_result))
-			printk(KERN_WARNING "%s:W: Error starting read ahead\n", name);
-	}
-
-	return retval;
-}
-
-static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt,
-						int frame_seq_number, int quiet)
-{
-	struct st_partstat * STps  = &(STp->ps[STp->partition]);
-	char		   * name  = tape_name(STp);
-	int		     cnt   = 0,
-			     bad   = 0,
-			     past  = 0,
-			     x,
-			     position;
-
-	/*
-	 * If we want just any frame (-1) and there is a frame in the buffer, return it
-	 */
-	if (frame_seq_number == -1 && STp->frame_in_buffer) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number);
-#endif
-		return (STps->eof);
-	}
-	/*
-         * Search and wait for the next logical tape frame
-	 */
-	while (1) {
-		if (cnt++ > 400) {
-                        printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n",
-					    name, frame_seq_number);
-			if (STp->read_error_frame) {
-				osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0);
-#if DEBUG
-                        	printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n",
-						    name, STp->read_error_frame);
-#endif
-				STp->read_error_frame = 0;
-				STp->abort_count++;
-			}
-			return (-EIO);
-		}
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n",
-					  name, frame_seq_number, cnt);
-#endif
-		if ( osst_initiate_read(STp, aSRpnt)
-                || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) {
-			if (STp->raw)
-				return (-EIO);
-			position = osst_get_frame_position(STp, aSRpnt);
-			if (position >= 0xbae && position < 0xbb8)
-				position = 0xbb8;
-			else if (position > STp->eod_frame_ppos || ++bad == 10) {
-				position = STp->read_error_frame - 1;
-				bad = 0;
-			}
-			else {
-				position += 29;
-				cnt      += 19;
-			}
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n",
-					 name, position);
-#endif
-			osst_set_frame_position(STp, aSRpnt, position, 0);
-			continue;
-		}
-		if (osst_verify_frame(STp, frame_seq_number, quiet))
-			break;
-		if (osst_verify_frame(STp, -1, quiet)) {
-			x = ntohl(STp->buffer->aux->frame_seq_num);
-			if (STp->fast_open) {
-				printk(KERN_WARNING
-				       "%s:W: Found logical frame %d instead of %d after fast open\n",
-				       name, x, frame_seq_number);
-				STp->header_ok = 0;
-				STp->read_error_frame = 0;
-				return (-EIO);
-			}
-			if (x > frame_seq_number) {
-				if (++past > 3) {
-					/* positioning backwards did not bring us to the desired frame */
-					position = STp->read_error_frame - 1;
-				}
-				else {
-			        	position = osst_get_frame_position(STp, aSRpnt)
-					         + frame_seq_number - x - 1;
-
-					if (STp->first_frame_position >= 3000 && position < 3000)
-						position -= 10;
-				}
-#if DEBUG
-                                printk(OSST_DEB_MSG
-				       "%s:D: Found logical frame %d while looking for %d: back up %d\n",
-						name, x, frame_seq_number,
-					       	STp->first_frame_position - position);
-#endif
-                        	osst_set_frame_position(STp, aSRpnt, position, 0);
-				cnt += 10;
-			}
-			else
-				past = 0;
-		}
-		if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name);
-#endif
-			osst_set_frame_position(STp, aSRpnt, 0xbb8, 0);
-			cnt--;
-		}
-		STp->frame_in_buffer = 0;
-	}
-	if (cnt > 1) {
-		STp->recover_count++;
-		STp->recover_erreg++;
-		printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n", 
-					name, STp->read_error_frame);
- 	}
-	STp->read_count++;
-
-#if DEBUG
-	if (debugging || STps->eof)
-		printk(OSST_DEB_MSG
-			"%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n",
-			name, frame_seq_number, STp->frame_seq_number, STps->eof);
-#endif
-	STp->fast_open = 0;
-	STp->read_error_frame = 0;
-	return (STps->eof);
-}
-
-static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num)
-{
-        struct st_partstat * STps = &(STp->ps[STp->partition]);
-	char		   * name = tape_name(STp);
-	int	retries    = 0;
-	int	frame_seq_estimate, ppos_estimate, move;
-	
-	if (logical_blk_num < 0) logical_blk_num = 0;
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n",
-				name, logical_blk_num, STp->logical_blk_num, 
-				STp->block_size<1024?STp->block_size:STp->block_size/1024,
-				STp->block_size<1024?'b':'k');
-#endif
-	/* Do we know where we are? */
-	if (STps->drv_block >= 0) {
-		move                = logical_blk_num - STp->logical_blk_num;
-		if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
-		move               /= (OS_DATA_SIZE / STp->block_size);
-		frame_seq_estimate  = STp->frame_seq_number + move;
-	} else
-		frame_seq_estimate  = logical_blk_num * STp->block_size / OS_DATA_SIZE;
-
-	if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10;
-	else			       ppos_estimate = frame_seq_estimate + 20;
-	while (++retries < 10) {
-	   if (ppos_estimate > STp->eod_frame_ppos-2) {
-	       frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate;
-	       ppos_estimate       = STp->eod_frame_ppos - 2;
-	   }
-	   if (frame_seq_estimate < 0) {
-	       frame_seq_estimate = 0;
-	       ppos_estimate      = 10;
-	   }
-	   osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0);
-	   if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) {
-	      /* we've located the estimated frame, now does it have our block? */
-	      if (logical_blk_num <  STp->logical_blk_num ||
-	          logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) {
-		 if (STps->eof == ST_FM_HIT)
-		    move = logical_blk_num < STp->logical_blk_num? -2 : 1;
-		 else {
-		    move                = logical_blk_num - STp->logical_blk_num;
-		    if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
-		    move               /= (OS_DATA_SIZE / STp->block_size);
-		 }
-		 if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1;
-#if DEBUG
-		 printk(OSST_DEB_MSG
-			"%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n",
-				name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, 
-				STp->logical_blk_num, logical_blk_num, move);
-#endif
-		 frame_seq_estimate += move;
-		 ppos_estimate      += move;
-		 continue;
-	      } else {
-		 STp->buffer->read_pointer  = (logical_blk_num - STp->logical_blk_num) * STp->block_size;
-		 STp->buffer->buffer_bytes -= STp->buffer->read_pointer;
-		 STp->logical_blk_num       =  logical_blk_num;
-#if DEBUG
-		 printk(OSST_DEB_MSG 
-			"%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n",
-				name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer, 
-				STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size, 
-				STp->block_size);
-#endif
-		 STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
-		 if (STps->eof == ST_FM_HIT) {
-		     STps->drv_file++;
-		     STps->drv_block = 0;
-		 } else {
-		     STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
-					  STp->logical_blk_num -
-					     (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
-					-1;
-		 }
-		 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
-		 return 0;
-	      }
-	   }
-	   if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0)
-	      goto error;
-	   /* we are not yet at the estimated frame, adjust our estimate of its physical position */
-#if DEBUG
-	   printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n", 
-			   name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, 
-			   STp->logical_blk_num, logical_blk_num);
-#endif
-	   if (frame_seq_estimate != STp->frame_seq_number)
-	      ppos_estimate += frame_seq_estimate - STp->frame_seq_number;
-	   else
-	      break;
-	}
-error:
-	printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n", 
-			    name, logical_blk_num, STp->logical_blk_num, retries);
-	return (-EIO);
-}
-
-/* The values below are based on the OnStream frame payload size of 32K == 2**15,
- * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
- * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
- * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
- */
-#define OSST_FRAME_SHIFT  6
-#define OSST_SECTOR_SHIFT 9
-#define OSST_SECTOR_MASK  0x03F
-
-static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	int	sector;
-#if DEBUG
-	char  * name = tape_name(STp);
-	
-	printk(OSST_DEB_MSG 
-		"%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n",
-		name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
-		STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block, 
-		STp->ps[STp->partition].rw == ST_WRITING?'w':'r',
-		STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes:
-		STp->buffer->read_pointer, STp->ps[STp->partition].eof);
-#endif
-	/* do we know where we are inside a file? */
-	if (STp->ps[STp->partition].drv_block >= 0) {
-		sector = (STp->frame_in_buffer ? STp->first_frame_position-1 :
-				STp->first_frame_position) << OSST_FRAME_SHIFT;
-		if (STp->ps[STp->partition].rw == ST_WRITING)
-		       	sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
-		else
-	       		sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
-	} else {
-		sector = osst_get_frame_position(STp, aSRpnt);
-		if (sector > 0)
-			sector <<= OSST_FRAME_SHIFT;
-	}
-	return sector;
-}
-
-static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector)
-{
-        struct st_partstat * STps   = &(STp->ps[STp->partition]);
-	int		     frame  = sector >> OSST_FRAME_SHIFT,
-			     offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT, 
-			     r;
-#if DEBUG
-	char          * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n",
-				name, sector, frame, offset);
-#endif
-	if (frame < 0 || frame >= STp->capacity) return (-ENXIO);
-
-	if (frame <= STp->first_data_ppos) {
-		STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0;
-		return (osst_set_frame_position(STp, aSRpnt, frame, 0));
-	}
-	r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0);
-	if (r < 0) return r;
-
-	r = osst_get_logical_frame(STp, aSRpnt, -1, 1);
-	if (r < 0) return r;
-
-	if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO);
-
-	if (offset) {
-		STp->logical_blk_num      += offset / STp->block_size;
-		STp->buffer->read_pointer  = offset;
-		STp->buffer->buffer_bytes -= offset;
-	} else {
-		STp->frame_seq_number++;
-		STp->frame_in_buffer       = 0;
-		STp->logical_blk_num      += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
-		STp->buffer->buffer_bytes  = STp->buffer->read_pointer = 0;
-	}
-	STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
-	if (STps->eof == ST_FM_HIT) {
-		STps->drv_file++;
-		STps->drv_block = 0;
-	} else {
-		STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
-				    STp->logical_blk_num -
-					(STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
-				  -1;
-	}
-	STps->eof       = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
-#if DEBUG
-	printk(OSST_DEB_MSG 
-		"%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n",
-		name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
-		STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof);
-#endif
-	return 0;
-}
-
-/*
- * Read back the drive's internal buffer contents, as a part
- * of the write error recovery mechanism for old OnStream
- * firmware revisions.
- * Precondition for this function to work: all frames in the
- * drive's buffer must be of one type (DATA, MARK or EOD)!
- */
-static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt,
-						unsigned int frame, unsigned int skip, int pending)
-{
-	struct osst_request   * SRpnt = * aSRpnt;
-	unsigned char	      * buffer, * p;
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	int			flag, new_frame, i;
-	int			nframes          = STp->cur_frames;
-	int			blks_per_frame   = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
-	int			frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num)
-						- (nframes + pending - 1);
-	int			logical_blk_num  = ntohl(STp->buffer->aux->logical_blk_num) 
-						- (nframes + pending - 1) * blks_per_frame;
-	char		      * name             = tape_name(STp);
-	unsigned long		startwait        = jiffies;
-#if DEBUG
-	int			dbg              = debugging;
-#endif
-
-	if ((buffer = vmalloc(array_size((nframes + 1), OS_DATA_SIZE))) == NULL)
-		return (-EIO);
-
-	printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n",
-			 name, nframes, pending?" and one that was pending":"");
-
-	osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE]));
-#if DEBUG
-	if (pending && debugging)
-		printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n",
-				name, frame_seq_number + nframes,
-			       	logical_blk_num + nframes * blks_per_frame,
-			       	p[0], p[1], p[2], p[3]);
-#endif
-	for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) {
-
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = 0x3C;		/* Buffer Read           */
-		cmd[1] = 6;		/* Retrieve Faulty Block */
-		cmd[7] = 32768 >> 8;
-		cmd[8] = 32768 & 0xff;
-
-		SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
-					    STp->timeout, MAX_RETRIES, 1);
-	
-		if ((STp->buffer)->syscall_result || !SRpnt) {
-			printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name);
-			vfree(buffer);
-			*aSRpnt = SRpnt;
-			return (-EIO);
-		}
-		osst_copy_from_buffer(STp->buffer, p);
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n",
-					  name, frame_seq_number + i, p[0], p[1], p[2], p[3]);
-#endif
-	}
-	*aSRpnt = SRpnt;
-	osst_get_frame_position(STp, aSRpnt);
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames);
-#endif
-	/* Write synchronously so we can be sure we're OK again and don't have to recover recursively */
-	/* In the header we don't actually re-write the frames that fail, just the ones after them */
-
-	for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) {
-
-		if (flag) {
-			if (STp->write_type == OS_WRITE_HEADER) {
-				i += skip;
-				p += skip * OS_DATA_SIZE;
-			}
-			else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990)
-				new_frame = 3000-i;
-			else
-				new_frame += skip;
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n",
-						name, new_frame+i, frame_seq_number+i);
-#endif
-			osst_set_frame_position(STp, aSRpnt, new_frame + i, 0);
-			osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE);
-			osst_get_frame_position(STp, aSRpnt);
-			SRpnt = * aSRpnt;
-
-			if (new_frame > frame + 1000) {
-				printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name);
-				vfree(buffer);
-				return (-EIO);
-			}
-			if ( i >= nframes + pending ) break;
-			flag = 0;
-		}
-		osst_copy_to_buffer(STp->buffer, p);
-		/*
-		 * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type!
-		 */
-		osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i,
-			       	logical_blk_num + i*blks_per_frame,
-			       	ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame);
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = WRITE_6;
-		cmd[1] = 1;
-		cmd[4] = 1;
-
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG
-				"%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n",
-				name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame,
-				p[0], p[1], p[2], p[3]);
-#endif
-		SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
-					    STp->timeout, MAX_RETRIES, 1);
-
-		if (STp->buffer->syscall_result)
-			flag = 1;
-		else {
-			p += OS_DATA_SIZE; i++;
-
-			/* if we just sent the last frame, wait till all successfully written */
-			if ( i == nframes + pending ) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name);
-#endif
-				memset(cmd, 0, MAX_COMMAND_SIZE);
-				cmd[0] = WRITE_FILEMARKS;
-				cmd[1] = 1;
-				SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
-							    STp->timeout, MAX_RETRIES, 1);
-#if DEBUG
-				if (debugging) {
-					printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
-					printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
-					debugging = 0;
-				}
-#endif
-				flag = STp->buffer->syscall_result;
-				while ( !flag && time_before(jiffies, startwait + 60*HZ) ) {
-
-					memset(cmd, 0, MAX_COMMAND_SIZE);
-					cmd[0] = TEST_UNIT_READY;
-
-					SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
-												MAX_RETRIES, 1);
-
-					if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
-					    (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) {
-						/* in the process of becoming ready */
-						msleep(100);
-						continue;
-					}
-					if (STp->buffer->syscall_result)
-						flag = 1;
-					break;
-				}
-#if DEBUG
-				debugging = dbg;
-				printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
-#endif
-			}
-		}
-		*aSRpnt = SRpnt;
-		if (flag) {
-			if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
-			     SRpnt->sense[12]         ==  0 &&
-			     SRpnt->sense[13]         ==  2) {
-				printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name);
-				vfree(buffer);
-				return (-EIO);			/* hit end of tape = fail */
-			}
-			i = ((SRpnt->sense[3] << 24) |
-			     (SRpnt->sense[4] << 16) |
-			     (SRpnt->sense[5] <<  8) |
-			      SRpnt->sense[6]        ) - new_frame;
-			p = &buffer[i * OS_DATA_SIZE];
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i);
-#endif
-			osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n",
-					  name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
-#endif
-		}
-	}
-	if (flag) {
-		/* error recovery did not successfully complete */
-		printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name,
-				STp->write_type == OS_WRITE_HEADER?"header":"body");
-	}
-	if (!pending)
-		osst_copy_to_buffer(STp->buffer, p);	/* so buffer content == at entry in all cases */
-	vfree(buffer);
-	return 0;
-}
-
-static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt,
-					unsigned int frame, unsigned int skip, int pending)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	char		      * name      = tape_name(STp);
-	int			expected  = 0;
-	int			attempts  = 1000 / skip;
-	int			flag      = 1;
-	unsigned long		startwait = jiffies;
-#if DEBUG
-	int			dbg       = debugging;
-#endif
-
-	while (attempts && time_before(jiffies, startwait + 60*HZ)) {
-		if (flag) {
-#if DEBUG
-			debugging = dbg;
-#endif
-			if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990)
-				frame = 3000-skip;
-			expected = frame+skip+STp->cur_frames+pending;
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n",
-					  name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending);
-#endif
-			osst_set_frame_position(STp, aSRpnt, frame + skip, 1);
-			flag = 0;
-			attempts--;
-			schedule_timeout_interruptible(msecs_to_jiffies(100));
-		}
-		if (osst_get_frame_position(STp, aSRpnt) < 0) {		/* additional write error */
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n",
-					  name, STp->first_frame_position,
-					  STp->last_frame_position, STp->cur_frames);
-#endif
-			frame = STp->last_frame_position;
-			flag = 1;
-			continue;
-		}
-		if (pending && STp->cur_frames < 50) {
-
-			memset(cmd, 0, MAX_COMMAND_SIZE);
-			cmd[0] = WRITE_6;
-			cmd[1] = 1;
-			cmd[4] = 1;
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n",
-					  name, STp->frame_seq_number-1, STp->first_frame_position);
-#endif
-			SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
-						      STp->timeout, MAX_RETRIES, 1);
-			*aSRpnt = SRpnt;
-
-			if (STp->buffer->syscall_result) {		/* additional write error */
-				if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
-				     SRpnt->sense[12]         ==  0 &&
-				     SRpnt->sense[13]         ==  2) {
-					printk(KERN_ERR
-					       "%s:E: Volume overflow in write error recovery\n",
-					       name);
-					break;				/* hit end of tape = fail */
-				}
-				flag = 1;
-			}
-			else
-				pending = 0;
-
-			continue;
-		}
-		if (STp->cur_frames == 0) {
-#if DEBUG
-			debugging = dbg;
-			printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
-#endif
-			if (STp->first_frame_position != expected) {
-				printk(KERN_ERR "%s:A: Actual position %d - expected %d\n", 
-						name, STp->first_frame_position, expected);
-				return (-EIO);
-			}
-			return 0;
-		}
-#if DEBUG
-		if (debugging) {
-			printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
-			printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
-			debugging = 0;
-		}
-#endif
-		schedule_timeout_interruptible(msecs_to_jiffies(100));
-	}
-	printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name);
-#if DEBUG
-	debugging = dbg;
-#endif
-	return (-EIO);
-}
-
-/*
- * Error recovery algorithm for the OnStream tape.
- */
-
-static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending)
-{
-	struct osst_request * SRpnt  = * aSRpnt;
-	struct st_partstat  * STps   = & STp->ps[STp->partition];
-	char		    * name   = tape_name(STp);
-	int		      retval = 0;
-	int		      rw_state;
-	unsigned int	      frame, skip;
-
-	rw_state = STps->rw;
-
-	if ((SRpnt->sense[ 2] & 0x0f) != 3
-	  || SRpnt->sense[12]         != 12
-	  || SRpnt->sense[13]         != 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name,
-			SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]);
-#endif
-		return (-EIO);
-	}
-	frame =	(SRpnt->sense[3] << 24) |
-		(SRpnt->sense[4] << 16) |
-		(SRpnt->sense[5] <<  8) |
-		 SRpnt->sense[6];
-	skip  =  SRpnt->sense[9];
- 
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip);
-#endif
-	osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n",
-			name, STp->first_frame_position, STp->last_frame_position);
-#endif
-	switch (STp->write_type) {
-	   case OS_WRITE_DATA:
-	   case OS_WRITE_EOD:
-	   case OS_WRITE_NEW_MARK:
-		printk(KERN_WARNING 
-			"%s:I: Relocating %d buffered logical frames from position %u to %u\n",
-			name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip);
-		if (STp->os_fw_rev >= 10600)
-			retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending);
-		else
-			retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending);
-		printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name,
-			       	retval?"E"    :"I",
-			       	retval?""     :"Don't worry, ",
-			       	retval?" not ":" ");
-		break;
-	   case OS_WRITE_LAST_MARK:
-		printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name);
-		osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
-		retval = -EIO;
-		break;
-	   case OS_WRITE_HEADER:
-		printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name);
-		retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending);
-		break;
-	   default:
-		printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name);
-		osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
-	}
-	osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n", 
-			name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position);
-	printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num);
-#endif
-	if (retval == 0) {
-		STp->recover_count++;
-		STp->recover_erreg++;
-	} else
-		STp->abort_count++;
-
-	STps->rw = rw_state;
-	return retval;
-}
-
-static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt,
-								 int mt_op, int mt_count)
-{
-	char  * name = tape_name(STp);
-	int     cnt;
-	int     last_mark_ppos = -1;
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count);
-#endif
-	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name);
-#endif
-		return -EIO;
-	}
-	if (STp->linux_media_version >= 4) {
-		/*
-		 * direct lookup in header filemark list
-		 */
-		cnt = ntohl(STp->buffer->aux->filemark_cnt);
-		if (STp->header_ok                         && 
-		    STp->header_cache != NULL              &&
-		    (cnt - mt_count)  >= 0                 &&
-		    (cnt - mt_count)   < OS_FM_TAB_MAX     &&
-		    (cnt - mt_count)   < STp->filemark_cnt &&
-		    STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos)
-
-			last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]);
-#if DEBUG
-		if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX)
-			printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
-			       STp->header_cache == NULL?"lack of header cache":"count out of range");
-		else
-			printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
-				name, cnt,
-				((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
-				 (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] ==
-					 STp->buffer->aux->last_mark_ppos))?"match":"error",
-			       mt_count, last_mark_ppos);
-#endif
-		if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) {
-			osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
-			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-				printk(OSST_DEB_MSG 
-					"%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
-				return (-EIO);
-			}
-			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
-				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
-						 name, last_mark_ppos);
-				return (-EIO);
-			}
-			goto found;
-		}
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name);
-#endif
-	}
-	cnt = 0;
-	while (cnt != mt_count) {
-		last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos);
-		if (last_mark_ppos == -1)
-			return (-EIO);
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos);
-#endif
-		osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
-		cnt++;
-		if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
-			return (-EIO);
-		}
-		if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
-			printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
-					 name, last_mark_ppos);
-			return (-EIO);
-		}
-	}
-found:
-	if (mt_op == MTBSFM) {
-		STp->frame_seq_number++;
-		STp->frame_in_buffer      = 0;
-		STp->buffer->buffer_bytes = 0;
-		STp->buffer->read_pointer = 0;
-		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
-	}
-	return 0;
-}
-
-/*
- * ADRL 1.1 compatible "slow" space filemarks fwd version
- *
- * Just scans for the filemark sequentially.
- */
-static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt,
-								     int mt_op, int mt_count)
-{
-	int	cnt = 0;
-#if DEBUG
-	char  * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count);
-#endif
-	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
-#endif
-		return (-EIO);
-	}
-	while (1) {
-		if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
-			return (-EIO);
-		}
-		if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
-			cnt++;
-		if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
-#endif
-			if (STp->first_frame_position > STp->eod_frame_ppos+1) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n",
-					       	name, STp->eod_frame_ppos, STp->first_frame_position-1);
-#endif
-				STp->eod_frame_ppos = STp->first_frame_position-1;
-			}
-			return (-EIO);
-		}
-		if (cnt == mt_count)
-			break;
-		STp->frame_in_buffer = 0;
-	}
-	if (mt_op == MTFSF) {
-		STp->frame_seq_number++;
-		STp->frame_in_buffer      = 0;
-		STp->buffer->buffer_bytes = 0;
-		STp->buffer->read_pointer = 0;
-		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
-	}
-	return 0;
-}
-
-/*
- * Fast linux specific version of OnStream FSF
- */
-static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt,
-								     int mt_op, int mt_count)
-{
-	char  * name = tape_name(STp);
-	int	cnt  = 0,
-		next_mark_ppos = -1;
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count);
-#endif
-	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
-#endif
-		return (-EIO);
-	}
-
-	if (STp->linux_media_version >= 4) {
-		/*
-		 * direct lookup in header filemark list
-		 */
-		cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1;
-		if (STp->header_ok                         && 
-		    STp->header_cache != NULL              &&
-		    (cnt + mt_count)   < OS_FM_TAB_MAX     &&
-		    (cnt + mt_count)   < STp->filemark_cnt &&
-		    ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
-		     (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos)))
-
-			next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]);
-#if DEBUG
-		if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX)
-			printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
-			       STp->header_cache == NULL?"lack of header cache":"count out of range");
-		else
-			printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
-			       name, cnt,
-			       ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
-				(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] ==
-					 STp->buffer->aux->last_mark_ppos))?"match":"error",
-			       mt_count, next_mark_ppos);
-#endif
-		if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
-			return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
-		} else {
-			osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
-			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
-						 name);
-#endif
-				return (-EIO);
-			}
-			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
-				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
-						 name, next_mark_ppos);
-				return (-EIO);
-			}
-			if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) {
-				printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n",
-						 name, cnt+mt_count, next_mark_ppos,
-						 ntohl(STp->buffer->aux->filemark_cnt));
-       				return (-EIO);
-			}
-		}
-	} else {
-		/*
-		 * Find nearest (usually previous) marker, then jump from marker to marker
-		 */
-		while (1) {
-			if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
-				break;
-			if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
-#endif
-				return (-EIO);
-			}
-			if (ntohl(STp->buffer->aux->filemark_cnt) == 0) {
-				if (STp->first_mark_ppos == -1) {
-#if DEBUG
-					printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
-					return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
-				}
-				osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos);
-				if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-					printk(OSST_DEB_MSG
-					       "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n",
-					       name);
-#endif
-					return (-EIO);
-				}
-				if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
-					printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n",
-							 name, STp->first_mark_ppos);
-					return (-EIO);
-				}
-			} else {
-				if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0)
-					return (-EIO);
-				mt_count++;
-			}
-		}
-		cnt++;
-		while (cnt != mt_count) {
-			next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos);
-			if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
-				return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt);
-			}
-#if DEBUG
-			else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos);
-#endif
-			osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
-			cnt++;
-			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-				printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
-						 name);
-#endif
-				return (-EIO);
-			}
-			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
-				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
-						 name, next_mark_ppos);
-				return (-EIO);
-			}
-		}
-	}
-	if (mt_op == MTFSF) {
-		STp->frame_seq_number++;
-		STp->frame_in_buffer      = 0;
-		STp->buffer->buffer_bytes = 0;
-		STp->buffer->read_pointer = 0;
-		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
-	}
-	return 0;
-}
-
-/*
- * In debug mode, we want to see as many errors as possible
- * to test the error recovery mechanism.
- */
-#if DEBUG
-static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt  = * aSRpnt;
-	char		      * name   = tape_name(STp);
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SELECT;
-	cmd[1] = 0x10;
-	cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	(STp->buffer)->b_data[0] = cmd[4] - 1;
-	(STp->buffer)->b_data[1] = 0;			/* Medium Type - ignoring */
-	(STp->buffer)->b_data[2] = 0;			/* Reserved */
-	(STp->buffer)->b_data[3] = 0;			/* Block Descriptor Length */
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7);
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2;
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4;
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries;
-
-	if (debugging)
-	    printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries);
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
-	*aSRpnt = SRpnt;
-
-	if ((STp->buffer)->syscall_result)
-	    printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries);
-}
-#endif
-
-
-static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	int	result;
-	int	this_mark_ppos = STp->first_frame_position;
-	int	this_mark_lbn  = STp->logical_blk_num;
-#if DEBUG
-	char  * name = tape_name(STp);
-#endif
-
-	if (STp->raw) return 0;
-
-	STp->write_type = OS_WRITE_NEW_MARK;
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n", 
-	       name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn);
-#endif
-	STp->dirty = 1;
-	result  = osst_flush_write_buffer(STp, aSRpnt);
-	result |= osst_flush_drive_buffer(STp, aSRpnt);
-	STp->last_mark_ppos = this_mark_ppos;
-	STp->last_mark_lbn  = this_mark_lbn;
-	if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX)
-		STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos);
-	if (STp->filemark_cnt++ == 0)
-		STp->first_mark_ppos = this_mark_ppos;
-	return result;
-}
-
-static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	int	result;
-#if DEBUG
-	char  * name = tape_name(STp);
-#endif
-
-	if (STp->raw) return 0;
-
-	STp->write_type = OS_WRITE_EOD;
-	STp->eod_frame_ppos = STp->first_frame_position;
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name,
-			STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num);
-#endif
-	STp->dirty = 1;
-
-	result  = osst_flush_write_buffer(STp, aSRpnt);	
-	result |= osst_flush_drive_buffer(STp, aSRpnt);
-	STp->eod_frame_lfa = --(STp->frame_seq_number);
-	return result;
-}
-
-static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
-{
-	char * name = tape_name(STp);
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where);
-#endif
-	osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
-	osst_set_frame_position(STp, aSRpnt, where, 0);
-	STp->write_type = OS_WRITE_FILLER;
-	while (count--) {
-		memcpy(STp->buffer->b_data, "Filler", 6);
-		STp->buffer->buffer_bytes = 6;
-		STp->dirty = 1;
-		if (osst_flush_write_buffer(STp, aSRpnt)) {
-			printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name);
-			return (-EIO);
-		}
-	}
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name);
-#endif
-	return osst_flush_drive_buffer(STp, aSRpnt);
-}
-
-static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
-{
-	char * name = tape_name(STp);
-	int     result;
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where);
-#endif
-	osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
-	osst_set_frame_position(STp, aSRpnt, where, 0);
-	STp->write_type = OS_WRITE_HEADER;
-	while (count--) {
-		osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache);
-		STp->buffer->buffer_bytes = sizeof(os_header_t);
-		STp->dirty = 1;
-		if (osst_flush_write_buffer(STp, aSRpnt)) {
-			printk(KERN_INFO "%s:I: Couldn't write header frame\n", name);
-			return (-EIO);
-		}
-	}
-	result = osst_flush_drive_buffer(STp, aSRpnt);
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done");
-#endif
-	return result;
-}
-
-static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod)
-{
-	os_header_t * header;
-	int	      result;
-	char        * name = tape_name(STp);
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name);
-#endif
-	if (STp->raw) return 0;
-
-	if (STp->header_cache == NULL) {
-		if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
-			printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
-			return (-ENOMEM);
-		}
-		memset(STp->header_cache, 0, sizeof(os_header_t));
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name);
-#endif
-	}
-	if (STp->header_ok) STp->update_frame_cntr++;
-	else                STp->update_frame_cntr = 0;
-
-	header = STp->header_cache;
-	strcpy(header->ident_str, "ADR_SEQ");
-	header->major_rev      = 1;
-	header->minor_rev      = 4;
-	header->ext_trk_tb_off = htons(17192);
-	header->pt_par_num     = 1;
-	header->partition[0].partition_num              = OS_DATA_PARTITION;
-	header->partition[0].par_desc_ver               = OS_PARTITION_VERSION;
-	header->partition[0].wrt_pass_cntr              = htons(STp->wrt_pass_cntr);
-	header->partition[0].first_frame_ppos           = htonl(STp->first_data_ppos);
-	header->partition[0].last_frame_ppos            = htonl(STp->capacity);
-	header->partition[0].eod_frame_ppos             = htonl(STp->eod_frame_ppos);
-	header->cfg_col_width                           = htonl(20);
-	header->dat_col_width                           = htonl(1500);
-	header->qfa_col_width                           = htonl(0);
-	header->ext_track_tb.nr_stream_part             = 1;
-	header->ext_track_tb.et_ent_sz                  = 32;
-	header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0;
-	header->ext_track_tb.dat_ext_trk_ey.fmt         = 1;
-	header->ext_track_tb.dat_ext_trk_ey.fm_tab_off  = htons(17736);
-	header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0;
-	header->ext_track_tb.dat_ext_trk_ey.last_hlb    = htonl(STp->eod_frame_lfa);
-	header->ext_track_tb.dat_ext_trk_ey.last_pp	= htonl(STp->eod_frame_ppos);
-	header->dat_fm_tab.fm_part_num                  = 0;
-	header->dat_fm_tab.fm_tab_ent_sz                = 4;
-	header->dat_fm_tab.fm_tab_ent_cnt               = htons(STp->filemark_cnt<OS_FM_TAB_MAX?
-								STp->filemark_cnt:OS_FM_TAB_MAX);
-
-	result  = __osst_write_header(STp, aSRpnt, 0xbae, 5);
-	if (STp->update_frame_cntr == 0)
-		    osst_write_filler(STp, aSRpnt, 0xbb3, 5);
-	result &= __osst_write_header(STp, aSRpnt,     5, 5);
-
-	if (locate_eod) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos);
-#endif
-		osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0);
-	}
-	if (result)
-		printk(KERN_ERR "%s:E: Write header failed\n", name);
-	else {
-		memcpy(STp->application_sig, "LIN4", 4);
-		STp->linux_media         = 1;
-		STp->linux_media_version = 4;
-		STp->header_ok           = 1;
-	}
-	return result;
-}
-
-static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	if (STp->header_cache != NULL)
-		memset(STp->header_cache, 0, sizeof(os_header_t));
-
-	STp->logical_blk_num = STp->frame_seq_number = 0;
-	STp->frame_in_buffer = 0;
-	STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A;
-	STp->filemark_cnt = 0;
-	STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
-	return osst_write_header(STp, aSRpnt, 1);
-}
-
-static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos)
-{
-	char        * name = tape_name(STp);
-	os_header_t * header;
-	os_aux_t    * aux;
-	char          id_string[8];
-	int	      linux_media_version,
-		      update_frame_cntr;
-
-	if (STp->raw)
-		return 1;
-
-	if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) {
-		if (osst_set_frame_position(STp, aSRpnt, ppos, 0))
-			printk(KERN_WARNING "%s:W: Couldn't position tape\n", name);
-		osst_wait_ready(STp, aSRpnt, 60 * 15, 0);
-		if (osst_initiate_read (STp, aSRpnt)) {
-			printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name);
-			return 0;
-		}
-	}
-	if (osst_read_frame(STp, aSRpnt, 180)) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name);
-#endif
-		return 0;
-	}
-	header = (os_header_t *) STp->buffer->b_data;	/* warning: only first segment addressable */
-	aux = STp->buffer->aux;
-	if (aux->frame_type != OS_FRAME_TYPE_HEADER) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos);
-#endif
-		return 0;
-	}
-	if (ntohl(aux->frame_seq_num)              != 0                   ||
-	    ntohl(aux->logical_blk_num)            != 0                   ||
-	          aux->partition.partition_num     != OS_CONFIG_PARTITION ||
-	    ntohl(aux->partition.first_frame_ppos) != 0                   ||
-	    ntohl(aux->partition.last_frame_ppos)  != 0xbb7               ) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name,
-				ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
-			       	aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos),
-			       	ntohl(aux->partition.last_frame_ppos));
-#endif
-		return 0;
-	}
-	if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 &&
-	    strncmp(header->ident_str, "ADR-SEQ", 7) != 0) {
-		strlcpy(id_string, header->ident_str, 8);
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string);
-#endif
-		return 0;
-	}
-	update_frame_cntr = ntohl(aux->update_frame_cntr);
-	if (update_frame_cntr < STp->update_frame_cntr) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n",
-				   name, ppos, update_frame_cntr, STp->update_frame_cntr);
-#endif
-		return 0;
-	}
-	if (header->major_rev != 1 || header->minor_rev != 4 ) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n", 
-				 name, (header->major_rev != 1 || header->minor_rev < 2 || 
-				       header->minor_rev  > 4 )? "Invalid" : "Warning:",
-				 header->major_rev, header->minor_rev);
-#endif
-		if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4)
-			return 0;
-	}
-#if DEBUG
-	if (header->pt_par_num != 1)
-		printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n", 
-				 name, header->pt_par_num);
-#endif
-	memcpy(id_string, aux->application_sig, 4);
-	id_string[4] = 0;
-	if (memcmp(id_string, "LIN", 3) == 0) {
-		STp->linux_media = 1;
-		linux_media_version = id_string[3] - '0';
-		if (linux_media_version != 4)
-			printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n",
-					 name, linux_media_version);
-	} else {
-		printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string);
-		return 0;
-	}
-	if (linux_media_version < STp->linux_media_version) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n",
-				  name, ppos, linux_media_version);
-#endif
-		return 0;
-	}
-	if (linux_media_version > STp->linux_media_version) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n",
-				   name, ppos, linux_media_version);
-#endif
-		memcpy(STp->application_sig, id_string, 5);
-		STp->linux_media_version = linux_media_version;
-		STp->update_frame_cntr = -1;
-	}
-	if (update_frame_cntr > STp->update_frame_cntr) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n",
-				   name, ppos, update_frame_cntr);
-#endif
-		if (STp->header_cache == NULL) {
-			if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
-				printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
-				return 0;
-			}
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name);
-#endif
-		}
-		osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache);
-		header = STp->header_cache;	/* further accesses from cached (full) copy */
-
-		STp->wrt_pass_cntr     = ntohs(header->partition[0].wrt_pass_cntr);
-		STp->first_data_ppos   = ntohl(header->partition[0].first_frame_ppos);
-		STp->eod_frame_ppos    = ntohl(header->partition[0].eod_frame_ppos);
-		STp->eod_frame_lfa     = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb);
-		STp->filemark_cnt      = ntohl(aux->filemark_cnt);
-		STp->first_mark_ppos   = ntohl(aux->next_mark_ppos);
-		STp->last_mark_ppos    = ntohl(aux->last_mark_ppos);
-		STp->last_mark_lbn     = ntohl(aux->last_mark_lbn);
-		STp->update_frame_cntr = update_frame_cntr;
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n",
-			  name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt);
-	printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name,
-			  STp->first_data_ppos,
-			  ntohl(header->partition[0].last_frame_ppos),
-			  ntohl(header->partition[0].eod_frame_ppos));
-	printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n", 
-			  name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos);
-#endif
-		if (header->minor_rev < 4 && STp->linux_media_version == 4) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name);
-#endif
-			memcpy((void *)header->dat_fm_tab.fm_tab_ent, 
-			       (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent));
-			memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list));
-		}
-		if (header->minor_rev == 4   &&
-		    (header->ext_trk_tb_off                          != htons(17192)               ||
-		     header->partition[0].partition_num              != OS_DATA_PARTITION          ||
-		     header->partition[0].par_desc_ver               != OS_PARTITION_VERSION       ||
-		     header->partition[0].last_frame_ppos            != htonl(STp->capacity)       ||
-		     header->cfg_col_width                           != htonl(20)                  ||
-		     header->dat_col_width                           != htonl(1500)                ||
-		     header->qfa_col_width                           != htonl(0)                   ||
-		     header->ext_track_tb.nr_stream_part             != 1                          ||
-		     header->ext_track_tb.et_ent_sz                  != 32                         ||
-		     header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION          ||
-		     header->ext_track_tb.dat_ext_trk_ey.fmt         != 1                          ||
-		     header->ext_track_tb.dat_ext_trk_ey.fm_tab_off  != htons(17736)               ||
-		     header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0                          ||
-		     header->ext_track_tb.dat_ext_trk_ey.last_pp     != htonl(STp->eod_frame_ppos) ||
-		     header->dat_fm_tab.fm_part_num                  != OS_DATA_PARTITION          ||
-		     header->dat_fm_tab.fm_tab_ent_sz                != 4                          ||
-		     header->dat_fm_tab.fm_tab_ent_cnt               !=
-			     htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX)))
-			printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name);
-
-	}
-
-	return 1;
-}
-
-static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	int	position, ppos;
-	int	first, last;
-	int	valid = 0;
-	char  * name  = tape_name(STp);
-
-	position = osst_get_frame_position(STp, aSRpnt);
-
-	if (STp->raw) {
-		STp->header_ok = STp->linux_media = 1;
-		STp->linux_media_version = 0;
-		return 1;
-	}
-	STp->header_ok = STp->linux_media = STp->linux_media_version = 0;
-	STp->wrt_pass_cntr = STp->update_frame_cntr = -1;
-	STp->eod_frame_ppos = STp->first_data_ppos = -1;
-	STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reading header\n", name);
-#endif
-
-	/* optimization for speed - if we are positioned at ppos 10, read second group first  */	
-	/* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */
-
-	first = position==10?0xbae: 5;
-	last  = position==10?0xbb3:10;
-
-	for (ppos = first; ppos < last; ppos++)
-		if (__osst_analyze_headers(STp, aSRpnt, ppos))
-			valid = 1;
-
-	first = position==10? 5:0xbae;
-	last  = position==10?10:0xbb3;
-
-	for (ppos = first; ppos < last; ppos++)
-		if (__osst_analyze_headers(STp, aSRpnt, ppos))
-			valid = 1;
-
-	if (!valid) {
-		printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name);
-		STp->eod_frame_ppos = STp->first_data_ppos = 0;
-		osst_set_frame_position(STp, aSRpnt, 10, 0);
-		return 0;
-	}
-	if (position <= STp->first_data_ppos) {
-		position = STp->first_data_ppos;
-		STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
-	}
-	osst_set_frame_position(STp, aSRpnt, position, 0);
-	STp->header_ok = 1;
-
-	return 1;
-}
-
-static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
-	int	frame_position  = STp->first_frame_position;
-	int	frame_seq_numbr = STp->frame_seq_number;
-	int	logical_blk_num = STp->logical_blk_num;
-       	int	halfway_frame   = STp->frame_in_buffer;
-	int	read_pointer    = STp->buffer->read_pointer;
-	int	prev_mark_ppos  = -1;
-	int	actual_mark_ppos, i, n;
-#if DEBUG
-	char  * name = tape_name(STp);
-
-	printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name);
-#endif
-	osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
-	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name);
-#endif
-		return (-EIO);
-	}
-	if (STp->linux_media_version >= 4) {
-		for (i=0; i<STp->filemark_cnt; i++)
-			if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position)
-				prev_mark_ppos = n;
-	} else
-		prev_mark_ppos = frame_position - 1;  /* usually - we don't really know */
-	actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ?
-				frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos);
-	if (frame_position  != STp->first_frame_position                   ||
-	    frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) ||
-	    prev_mark_ppos  != actual_mark_ppos                            ) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name,
-				  STp->first_frame_position, frame_position, 
-				  STp->frame_seq_number + (halfway_frame?0:1),
-				  frame_seq_numbr, actual_mark_ppos, prev_mark_ppos);
-#endif
-		return (-EIO);
-	}
-	if (halfway_frame) {
-		/* prepare buffer for append and rewrite on top of original */
-		osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
-		STp->buffer->buffer_bytes  = read_pointer;
-		STp->ps[STp->partition].rw = ST_WRITING;
-		STp->dirty                 = 1;
-	}
-	STp->frame_in_buffer  = halfway_frame;
-	STp->frame_seq_number = frame_seq_numbr;
-	STp->logical_blk_num  = logical_blk_num;
-	return 0;
-}
-
-/* Acc. to OnStream, the vers. numbering is the following:
- * X.XX for released versions (X=digit), 
- * XXXY for unreleased versions (Y=letter)
- * Ordering 1.05 < 106A < 106B < ...  < 106a < ... < 1.06
- * This fn makes monoton numbers out of this scheme ...
- */
-static unsigned int osst_parse_firmware_rev (const char * str)
-{
-	if (str[1] == '.') {
-		return (str[0]-'0')*10000
-			+(str[2]-'0')*1000
-			+(str[3]-'0')*100;
-	} else {
-		return (str[0]-'0')*10000
-			+(str[1]-'0')*1000
-			+(str[2]-'0')*100 - 100
-			+(str[3]-'@');
-	}
-}
-
-/*
- * Configure the OnStream SCII tape drive for default operation
- */
-static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
-	unsigned char                  cmd[MAX_COMMAND_SIZE];
-	char                         * name = tape_name(STp);
-	struct osst_request          * SRpnt = * aSRpnt;
-	osst_mode_parameter_header_t * header;
-	osst_block_size_page_t       * bs;
-	osst_capabilities_page_t     * cp;
-	osst_tape_paramtr_page_t     * prm;
-	int                            drive_buffer_size;
-
-	if (STp->ready != ST_READY) {
-#if DEBUG
-	    printk(OSST_DEB_MSG "%s:D: Not Ready\n", name);
-#endif
-	    return (-EIO);
-	}
-	
-	if (STp->os_fw_rev < 10600) {
-	    printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev);
-	    printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name);
-	}
-
-	/*
-	 * Configure 32.5KB (data+aux) frame size.
-         * Get the current frame size from the block size mode page
-	 */
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SENSE;
-	cmd[1] = 8;
-	cmd[2] = BLOCK_SIZE_PAGE;
-	cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
-	if (SRpnt == NULL) {
-#if DEBUG
- 	    printk(OSST_DEB_MSG "osst :D: Busy\n");
-#endif
-	    return (-EBUSY);
-	}
-	*aSRpnt = SRpnt;
-	if ((STp->buffer)->syscall_result != 0) {
-	    printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name);
-	    return (-EIO);
-	}
-
-	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
-	bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl);
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n",   name, bs->play32     ? "Yes" : "No");
-	printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5   ? "Yes" : "No");
-	printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n",      name, bs->record32   ? "Yes" : "No");
-	printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n",    name, bs->record32_5 ? "Yes" : "No");
-#endif
-
-	/*
-	 * Configure default auto columns mode, 32.5KB transfer mode
-	 */ 
-	bs->one = 1;
-	bs->play32 = 0;
-	bs->play32_5 = 1;
-	bs->record32 = 0;
-	bs->record32_5 = 1;
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SELECT;
-	cmd[1] = 0x10;
-	cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
-	*aSRpnt = SRpnt;
-	if ((STp->buffer)->syscall_result != 0) {
-	    printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name);
-	    return (-EIO);
-	}
-
-#if DEBUG
-	printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name);
-	 /*
-	 * In debug mode, we want to see as many errors as possible
-	 * to test the error recovery mechanism.
-	 */
-	osst_set_retries(STp, aSRpnt, 0);
-	SRpnt = * aSRpnt;
-#endif
-
-	/*
-	 * Set vendor name to 'LIN4' for "Linux support version 4".
-	 */
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SELECT;
-	cmd[1] = 0x10;
-	cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1;
-	header->medium_type      = 0;	/* Medium Type - ignoring */
-	header->dsp              = 0;	/* Reserved */
-	header->bdl              = 0;	/* Block Descriptor Length */
-	
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7);
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6;
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L';
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I';
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N';
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4';
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0;
-	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0;
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
-	*aSRpnt = SRpnt;
-
-	if ((STp->buffer)->syscall_result != 0) {
-	    printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name, 
-			(char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2));
-	    return (-EIO);
-	}
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SENSE;
-	cmd[1] = 8;
-	cmd[2] = CAPABILITIES_PAGE;
-	cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
-	*aSRpnt = SRpnt;
-
-	if ((STp->buffer)->syscall_result != 0) {
-	    printk (KERN_ERR "%s:E: Can't get capabilities page\n", name);
-	    return (-EIO);
-	}
-
-	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
-	cp     = (osst_capabilities_page_t    *) ((STp->buffer)->b_data +
-		 sizeof(osst_mode_parameter_header_t) + header->bdl);
-
-	drive_buffer_size = ntohs(cp->buffer_size) / 2;
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = MODE_SENSE;
-	cmd[1] = 8;
-	cmd[2] = TAPE_PARAMTR_PAGE;
-	cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
-	*aSRpnt = SRpnt;
-
-	if ((STp->buffer)->syscall_result != 0) {
-	    printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name);
-	    return (-EIO);
-	}
-
-	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
-	prm    = (osst_tape_paramtr_page_t    *) ((STp->buffer)->b_data +
-		 sizeof(osst_mode_parameter_header_t) + header->bdl);
-
-	STp->density  = prm->density;
-	STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks);
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n",
-			  name, STp->density, STp->capacity / 32, drive_buffer_size);
-#endif
-
-	return 0;
-	
-}
-
-
-/* Step over EOF if it has been inadvertently crossed (ioctl not used because
-   it messes up the block number). */
-static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward)
-{
-	int	result;
-	char  * name = tape_name(STp);
-
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n",
-	   			  name, forward ? "forward" : "backward");
-#endif
-
-	if (forward) {
-	   /* assumes that the filemark is already read by the drive, so this is low cost */
-	   result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1);
-	}
-	else
-	   /* assumes this is only called if we just read the filemark! */
-	   result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1);
-
-	if (result < 0)
-	   printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n",
-				name, forward ? "forward" : "backward");
-
-	return result;
-}
-
-
-/* Get the tape position. */
-
-static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
-	unsigned char		scmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	int			result = 0;
-	char    	      * name   = tape_name(STp);
-
-	/* KG: We want to be able to use it for checking Write Buffer availability
-	 *  and thus don't want to risk to overwrite anything. Exchange buffers ... */
-	char		mybuf[24];
-	char	      * olddata = STp->buffer->b_data;
-	int		oldsize = STp->buffer->buffer_size;
-
-	if (STp->ready != ST_READY) return (-EIO);
-
-	memset (scmd, 0, MAX_COMMAND_SIZE);
-	scmd[0] = READ_POSITION;
-
-	STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
-	SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
-				      STp->timeout, MAX_RETRIES, 1);
-	if (!SRpnt) {
-		STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
-		return (-EBUSY);
-	}
-	*aSRpnt = SRpnt;
-
-	if (STp->buffer->syscall_result)
-		result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL;	/* 3: Write Error */
-
-	if (result == -EINVAL)
-		printk(KERN_ERR "%s:E: Can't read tape position.\n", name);
-	else {
-		if (result == -EIO) {	/* re-read position - this needs to preserve media errors */
-			unsigned char mysense[16];
-			memcpy (mysense, SRpnt->sense, 16);
-			memset (scmd, 0, MAX_COMMAND_SIZE);
-			scmd[0] = READ_POSITION;
-			STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
-			SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
-						    STp->timeout, MAX_RETRIES, 1);
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n",
-					name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:",
-					SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]);
-#endif
-			if (!STp->buffer->syscall_result)
-				memcpy (SRpnt->sense, mysense, 16);
-			else
-				printk(KERN_WARNING "%s:W: Double error in get position\n", name);
-		}
-		STp->first_frame_position = ((STp->buffer)->b_data[4] << 24)
-					  + ((STp->buffer)->b_data[5] << 16)
-					  + ((STp->buffer)->b_data[6] << 8)
-					  +  (STp->buffer)->b_data[7];
-		STp->last_frame_position  = ((STp->buffer)->b_data[ 8] << 24)
-					  + ((STp->buffer)->b_data[ 9] << 16)
-					  + ((STp->buffer)->b_data[10] <<  8)
-					  +  (STp->buffer)->b_data[11];
-		STp->cur_frames           =  (STp->buffer)->b_data[15];
-#if DEBUG
-		if (debugging) {
-			printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name,
-					    STp->first_frame_position, STp->last_frame_position,
-					    ((STp->buffer)->b_data[0]&0x80)?" (BOP)":
-					    ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"",
-					    STp->cur_frames);
-		}
-#endif
-		if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name,
-					STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
-#endif
-			STp->first_frame_position = STp->last_frame_position;
-		}
-	}
-	STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
-
-	return (result == 0 ? STp->first_frame_position : result);
-}
-
-
-/* Set the tape block */
-static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip)
-{
-	unsigned char		scmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	struct st_partstat    * STps;
-	int			result = 0;
-	int			pp     = (ppos == 3000 && !skip)? 0 : ppos;
-	char		      * name   = tape_name(STp);
-
-	if (STp->ready != ST_READY) return (-EIO);
-
-	STps = &(STp->ps[STp->partition]);
-
-	if (ppos < 0 || ppos > STp->capacity) {
-		printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos);
-		pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1);
-		result = (-EINVAL);
-	}
-
-	do {
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp);
-#endif
-		memset (scmd, 0, MAX_COMMAND_SIZE);
-		scmd[0] = SEEK_10;
-		scmd[1] = 1;
-		scmd[3] = (pp >> 24);
-		scmd[4] = (pp >> 16);
-		scmd[5] = (pp >> 8);
-		scmd[6] =  pp;
-		if (skip)
-			scmd[9] = 0x80;
-
-		SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout,
-								MAX_RETRIES, 1);
-		if (!SRpnt)
-			return (-EBUSY);
-		*aSRpnt  = SRpnt;
-
-		if ((STp->buffer)->syscall_result != 0) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n",
-					name, STp->first_frame_position, pp);
-#endif
-			result = (-EIO);
-		}
-		if (pp != ppos)
-			osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
-	} while ((pp != ppos) && (pp = ppos));
-	STp->first_frame_position = STp->last_frame_position = ppos;
-	STps->eof = ST_NOEOF;
-	STps->at_sm = 0;
-	STps->rw = ST_IDLE;
-	STp->frame_in_buffer = 0;
-	return result;
-}
-
-static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT)
-{
-	struct st_partstat * STps = &(STp->ps[STp->partition]);
-	int result = 0;
-
-	if (STp->write_type != OS_WRITE_NEW_MARK) {
-		/* true unless the user wrote the filemark for us */
-		result = osst_flush_drive_buffer(STp, aSRpnt);
-		if (result < 0) goto out;
-		result = osst_write_filemark(STp, aSRpnt);
-		if (result < 0) goto out;
-
-		if (STps->drv_file >= 0)
-			STps->drv_file++ ;
-		STps->drv_block = 0;
-	}
-	result = osst_write_eod(STp, aSRpnt);
-	osst_write_header(STp, aSRpnt, leave_at_EOT);
-
-	STps->eof = ST_FM;
-out:
-	return result;
-}
-
-/* osst versions of st functions - augmented and stripped to suit OnStream only */
-
-/* Flush the write buffer (never need to write if variable blocksize). */
-static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
-	int			offset, transfer, blks = 0;
-	int			result = 0;
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt = *aSRpnt;
-	struct st_partstat    * STps;
-	char		      * name = tape_name(STp);
-
-	if ((STp->buffer)->writing) {
-		if (SRpnt == (STp->buffer)->last_SRpnt)
-#if DEBUG
-			{ printk(OSST_DEB_MSG
-	 "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name);
-#endif
-			*aSRpnt = SRpnt = NULL;
-#if DEBUG
-			} else if (SRpnt)
-				printk(OSST_DEB_MSG
-	 "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name);
-#endif	
-		osst_write_behind_check(STp);
-		if ((STp->buffer)->syscall_result) {
-#if DEBUG
-			if (debugging)
-				printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n",
-				       name, (STp->buffer)->midlevel_result);
-#endif
-			if ((STp->buffer)->midlevel_result == INT_MAX)
-				return (-ENOSPC);
-			return (-EIO);
-		}
-	}
-
-	result = 0;
-	if (STp->dirty == 1) {
-
-		STp->write_count++;
-		STps     = &(STp->ps[STp->partition]);
-		STps->rw = ST_WRITING;
-		offset   = STp->buffer->buffer_bytes;
-		blks     = (offset + STp->block_size - 1) / STp->block_size;
-		transfer = OS_FRAME_SIZE;
-		
-		if (offset < OS_DATA_SIZE)
-			osst_zero_buffer_tail(STp->buffer);
-
-		if (STp->poll)
-			if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120))
-				result = osst_recover_wait_frame(STp, aSRpnt, 1);
-
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = WRITE_6;
-		cmd[1] = 1;
-		cmd[4] = 1;
-
-		switch	(STp->write_type) {
-		   case OS_WRITE_DATA:
-#if DEBUG
-   			if (debugging)
-				printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n",
-					name, blks, STp->frame_seq_number, 
-					STp->logical_blk_num - blks, STp->logical_blk_num - 1);
-#endif
-			osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
-				      STp->logical_blk_num - blks, STp->block_size, blks);
-			break;
-		   case OS_WRITE_EOD:
-			osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++,
-				      STp->logical_blk_num, 0, 0);
-			break;
-		   case OS_WRITE_NEW_MARK:
-			osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++,
-				      STp->logical_blk_num++, 0, blks=1);
-			break;
-		   case OS_WRITE_HEADER:
-			osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0);
-			break;
-		default: /* probably FILLER */
-			osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0);
-		}
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
-			  			 name, offset, transfer, blks);
-#endif
-
-		SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
-					      STp->timeout, MAX_RETRIES, 1);
-		*aSRpnt = SRpnt;
-		if (!SRpnt)
-			return (-EBUSY);
-
-		if ((STp->buffer)->syscall_result != 0) {
-#if DEBUG
-			printk(OSST_DEB_MSG
-				"%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n",
-				name, SRpnt->sense[0], SRpnt->sense[2],
-				SRpnt->sense[12], SRpnt->sense[13]);
-#endif
-			if ((SRpnt->sense[0] & 0x70) == 0x70 &&
-			    (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */
-			    (SRpnt->sense[2] & 0x0f) == NO_SENSE) {
-				STp->dirty = 0;
-				(STp->buffer)->buffer_bytes = 0;
-				result = (-ENOSPC);
-			}
-			else {
-				if (osst_write_error_recovery(STp, aSRpnt, 1)) {
-					printk(KERN_ERR "%s:E: Error on flush write.\n", name);
-					result = (-EIO);
-				}
-			}
-			STps->drv_block = (-1);		/* FIXME - even if write recovery succeeds? */
-		}
-		else {
-			STp->first_frame_position++;
-			STp->dirty = 0;
-			(STp->buffer)->buffer_bytes = 0;
-		}
-	}
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result);
-#endif
-	return result;
-}
-
-
-/* Flush the tape buffer. The tape will be positioned correctly unless
-   seek_next is true. */
-static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next)
-{
-	struct st_partstat * STps;
-	int    backspace = 0, result = 0;
-#if DEBUG
-	char * name = tape_name(STp);
-#endif
-
-	/*
-	 * If there was a bus reset, block further access
-	 * to this device.
-	 */
-	if( STp->pos_unknown)
-		return (-EIO);
-
-	if (STp->ready != ST_READY)
-		return 0;
-
-	STps = &(STp->ps[STp->partition]);
-	if (STps->rw == ST_WRITING || STp->dirty) {	/* Writing */
-		STp->write_type = OS_WRITE_DATA;
-		return osst_flush_write_buffer(STp, aSRpnt);
-	}
-	if (STp->block_size == 0)
-		return 0;
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name);
-#endif
-
-	if (!STp->can_bsr) {
-		backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size -
-			    ((STp->buffer)->read_pointer + STp->block_size - 1        ) / STp->block_size ;
-		(STp->buffer)->buffer_bytes = 0;
-		(STp->buffer)->read_pointer = 0;
-		STp->frame_in_buffer = 0;		/* FIXME is this relevant w. OSST? */
-	}
-
-	if (!seek_next) {
-		if (STps->eof == ST_FM_HIT) {
-			result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */
-			if (!result)
-				STps->eof = ST_NOEOF;
-			else {
-				if (STps->drv_file >= 0)
-					STps->drv_file++;
-				STps->drv_block = 0;
-			}
-		}
-		if (!result && backspace > 0)	/* TODO -- design and run a test case for this */
-			result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace);
-	}
-	else if (STps->eof == ST_FM_HIT) {
-		if (STps->drv_file >= 0)
-			STps->drv_file++;
-		STps->drv_block = 0;
-		STps->eof = ST_NOEOF;
-	}
-
-	return result;
-}
-
-static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous)
-{
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt;
-	int			blks;
-#if DEBUG
-	char		      * name = tape_name(STp);
-#endif
-
-	if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name);
-#endif
-		if (osst_flush_drive_buffer(STp, aSRpnt) < 0) {
-			return (-EIO);
-		}
-		/* error recovery may have bumped us past the header partition */
-		if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name);
-#endif
-		osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8);
-		}
-	}
-
-	if (STp->poll)
-		if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120))
-			if (osst_recover_wait_frame(STp, aSRpnt, 1))
-				return (-EIO);
-
-//	osst_build_stats(STp, &SRpnt);
-
-	STp->ps[STp->partition].rw = ST_WRITING;
-	STp->write_type            = OS_WRITE_DATA;
-			
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0]   = WRITE_6;
-	cmd[1]   = 1;
-	cmd[4]   = 1;						/* one frame at a time... */
-	blks     = STp->buffer->buffer_bytes / STp->block_size;
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks, 
-			STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1);
-#endif
-	osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
-		      STp->logical_blk_num - blks, STp->block_size, blks);
-
-#if DEBUG
-	if (!synchronous)
-		STp->write_pending = 1;
-#endif
-	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout,
-									MAX_RETRIES, synchronous);
-	if (!SRpnt)
-		return (-EBUSY);
-	*aSRpnt = SRpnt;
-
-	if (synchronous) {
-		if (STp->buffer->syscall_result != 0) {
-#if DEBUG
-			if (debugging)
-				printk(OSST_DEB_MSG "%s:D: Error on write:\n", name);
-#endif
-			if ((SRpnt->sense[0] & 0x70) == 0x70 &&
-			    (SRpnt->sense[2] & 0x40)) {
-				if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW)
-					return (-ENOSPC);
-			}
-			else {
-				if (osst_write_error_recovery(STp, aSRpnt, 1))
-					return (-EIO);
-			}
-		}
-		else
-			STp->first_frame_position++;
-	}
-
-	STp->write_count++;
-
-	return 0;
-}
-
-/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */
-static int do_door_lock(struct osst_tape * STp, int do_lock)
-{
-	int retval;
-
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl");
-#endif
-
-	retval = scsi_set_medium_removal(STp->device,
-			do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
-	if (!retval)
-		STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
-	else
-		STp->door_locked = ST_LOCK_FAILS;
-	return retval;
-}
-
-/* Set the internal state after reset */
-static void reset_state(struct osst_tape *STp)
-{
-	int i;
-	struct st_partstat *STps;
-
-	STp->pos_unknown = 0;
-	for (i = 0; i < ST_NBR_PARTITIONS; i++) {
-		STps = &(STp->ps[i]);
-		STps->rw = ST_IDLE;
-		STps->eof = ST_NOEOF;
-		STps->at_sm = 0;
-		STps->last_block_valid = 0;
-		STps->drv_block = -1;
-		STps->drv_file = -1;
-	}
-}
-				
-
-/* Entry points to osst */
-
-/* Write command */
-static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos)
-{
-	ssize_t		      total, retval = 0;
-	ssize_t		      i, do_count, blks, transfer;
-	int		      write_threshold;
-	int		      doing_write = 0;
-	const char   __user * b_point;
-	struct osst_request * SRpnt = NULL;
-	struct st_modedef   * STm;
-	struct st_partstat  * STps;
-	struct osst_tape    * STp  = filp->private_data;
-	char		    * name = tape_name(STp);
-
-
-	if (mutex_lock_interruptible(&STp->lock))
-		return (-ERESTARTSYS);
-
-	/*
-	 * If we are in the middle of error recovery, don't let anyone
-	 * else try and use this device.  Also, if error recovery fails, it
-	 * may try and take the device offline, in which case all further
-	 * access to the device is prohibited.
-	 */
-	if( !scsi_block_when_processing_errors(STp->device) ) {
-		retval = (-ENXIO);
-		goto out;
-	}
-	
-	if (STp->ready != ST_READY) {
-		if (STp->ready == ST_NO_TAPE)
-			retval = (-ENOMEDIUM);
-		else
-			retval = (-EIO);
-		goto out;
-	}
-	STm = &(STp->modes[STp->current_mode]);
-	if (!STm->defined) {
-		retval = (-ENXIO);
-		goto out;
-	}
-	if (count == 0)
-		goto out;
-
-	/*
-	 * If there was a bus reset, block further access
-	 * to this device.
-	 */
-	if (STp->pos_unknown) {
-		retval = (-EIO);
-		goto out;
-	}
-
-#if DEBUG
-	if (!STp->in_use) {
-		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
-		retval = (-EIO);
-		goto out;
-	}
-#endif
-
-	if (STp->write_prot) {
-		retval = (-EACCES);
-		goto out;
-	}
-
-	/* Write must be integral number of blocks */
-	if (STp->block_size != 0 && (count % STp->block_size) != 0) {
-		printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n",
-				       name, count, STp->block_size<1024?
-				       STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
-		retval = (-EINVAL);
-		goto out;
-	}
-
-	if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) {
-		printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n",
-				       name, STp->first_frame_position);
-		retval = (-ENOSPC);
-		goto out;
-	}
-
-	if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
-		STp->door_locked = ST_LOCKED_AUTO;
-
-	STps = &(STp->ps[STp->partition]);
-
-	if (STps->rw == ST_READING) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name, 
-					STps->drv_file, STps->drv_block);
-#endif
-		retval = osst_flush_buffer(STp, &SRpnt, 0);
-		if (retval)
-			goto out;
-		STps->rw = ST_IDLE;
-	}
-	if (STps->rw != ST_WRITING) {
-		/* Are we totally rewriting this tape? */
-		if (!STp->header_ok ||
-		    (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) ||
-		    (STps->drv_file == 0 && STps->drv_block == 0)) {
-			STp->wrt_pass_cntr++;
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n",
-						  name, STp->wrt_pass_cntr);
-#endif
-			osst_reset_header(STp, &SRpnt);
-			STps->drv_file = STps->drv_block = 0;
-		}
-		/* Do we know where we'll be writing on the tape? */
-		else {
-			if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) ||
-			  		STps->drv_file < 0 || STps->drv_block < 0) {
-				if (STp->first_frame_position == STp->eod_frame_ppos) {	/* at EOD */
-			  		STps->drv_file = STp->filemark_cnt;
-			  		STps->drv_block = 0;
-				}
-				else {
-					/* We have no idea where the tape is positioned - give up */
-#if DEBUG
-					printk(OSST_DEB_MSG
-						"%s:D: Cannot write at indeterminate position.\n", name);
-#endif
-					retval = (-EIO);
-					goto out;
-				}
-      			}	  
-			if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) {
-				STp->filemark_cnt = STps->drv_file;
-				STp->last_mark_ppos =
-				       	ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]);
-				printk(KERN_WARNING
-					"%s:W: Overwriting file %d with old write pass counter %d\n",
-						name, STps->drv_file, STp->wrt_pass_cntr);
-				printk(KERN_WARNING
-					"%s:W: may lead to stale data being accepted on reading back!\n",
-						name);
-#if DEBUG
-				printk(OSST_DEB_MSG
-				  "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n",
-					name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn);
-#endif
-			}
-		}
-		STp->fast_open = 0;
-	}
-	if (!STp->header_ok) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name);
-#endif
-		retval = (-EIO);
-		goto out;
-	}
-
-	if ((STp->buffer)->writing) {
-if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__);
-		osst_write_behind_check(STp);
-		if ((STp->buffer)->syscall_result) {
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name,
-						 (STp->buffer)->midlevel_result);
-#endif
-		if ((STp->buffer)->midlevel_result == INT_MAX)
-			STps->eof = ST_EOM_OK;
-		else
-			STps->eof = ST_EOM_ERROR;
-		}
-	}
-	if (STps->eof == ST_EOM_OK) {
-		retval = (-ENOSPC);
-		goto out;
-	}
-	else if (STps->eof == ST_EOM_ERROR) {
-		retval = (-EIO);
-		goto out;
-	}
-
-	/* Check the buffer readability in cases where copy_user might catch
-		 the problems after some tape movement. */
-	if ((copy_from_user(&i, buf, 1) != 0 ||
-	     copy_from_user(&i, buf + count - 1, 1) != 0)) {
-		retval = (-EFAULT);
-		goto out;
-	}
-
-	if (!STm->do_buffer_writes) {
-		write_threshold = 1;
-	}
-	else
-		write_threshold = (STp->buffer)->buffer_blocks * STp->block_size;
-	if (!STm->do_async_writes)
-		write_threshold--;
-
-	total = count;
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n",
-				name, (int) count, STps->drv_file, STps->drv_block,
-				STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position);
-#endif
-	b_point = buf;
-	while ((STp->buffer)->buffer_bytes + count > write_threshold)
-	{
-		doing_write = 1;
-		do_count = (STp->buffer)->buffer_blocks * STp->block_size -
-			   (STp->buffer)->buffer_bytes;
-		if (do_count > count)
-			do_count = count;
-
-		i = append_to_buffer(b_point, STp->buffer, do_count);
-		if (i) {
-			retval = i;
-			goto out;
-		}
-
-		blks = do_count / STp->block_size;
-		STp->logical_blk_num += blks;  /* logical_blk_num is incremented as data is moved from user */
-  
-		i = osst_write_frame(STp, &SRpnt, 1);
-
-		if (i == (-ENOSPC)) {
-			transfer = STp->buffer->writing;	/* FIXME -- check this logic */
-			if (transfer <= do_count) {
-				*ppos += do_count - transfer;
-				count -= do_count - transfer;
-				if (STps->drv_block >= 0) {
-					STps->drv_block += (do_count - transfer) / STp->block_size;
-				}
-				STps->eof = ST_EOM_OK;
-				retval = (-ENOSPC);		/* EOM within current request */
-#if DEBUG
-				if (debugging)
-				      printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n",
-							     name, (int) transfer);
-#endif
-			}
-			else {
-				STps->eof = ST_EOM_ERROR;
-				STps->drv_block = (-1);		/* Too cautious? */
-				retval = (-EIO);		/* EOM for old data */
-#if DEBUG
-				if (debugging)
-				      printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name);
-#endif
-			}
-		}
-		else
-			retval = i;
-			
-		if (retval < 0) {
-			if (SRpnt != NULL) {
-				osst_release_request(SRpnt);
-				SRpnt = NULL;
-			}
-			STp->buffer->buffer_bytes = 0;
-			STp->dirty = 0;
-			if (count < total)
-				retval = total - count;
-			goto out;
-		}
-
-		*ppos += do_count;
-		b_point += do_count;
-		count -= do_count;
-		if (STps->drv_block >= 0) {
-			STps->drv_block += blks;
-		}
-		STp->buffer->buffer_bytes = 0;
-		STp->dirty = 0;
-	}  /* end while write threshold exceeded */
-
-	if (count != 0) {
-		STp->dirty = 1;
-		i = append_to_buffer(b_point, STp->buffer, count);
-		if (i) {
-			retval = i;
-			goto out;
-		}
-		blks = count / STp->block_size;
-		STp->logical_blk_num += blks;
-		if (STps->drv_block >= 0) {
-			STps->drv_block += blks;
-		}
-		*ppos += count;
-		count = 0;
-	}
-
-	if (doing_write && (STp->buffer)->syscall_result != 0) {
-		retval = (STp->buffer)->syscall_result;
-		goto out;
-	}
-
-	if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) { 
-		/* Schedule an asynchronous write */
-		(STp->buffer)->writing = ((STp->buffer)->buffer_bytes /
-					   STp->block_size) * STp->block_size;
-		STp->dirty = !((STp->buffer)->writing ==
-				          (STp->buffer)->buffer_bytes);
-
-		i = osst_write_frame(STp, &SRpnt, 0);
-		if (i < 0) {
-			retval = (-EIO);
-			goto out;
-		}
-		SRpnt = NULL;			/* Prevent releasing this request! */
-	}
-	STps->at_sm &= (total == 0);
-	if (total > 0)
-		STps->eof = ST_NOEOF;
-
-	retval = total;
-
-out:
-	if (SRpnt != NULL) osst_release_request(SRpnt);
-
-	mutex_unlock(&STp->lock);
-
-	return retval;
-}
-
-
-/* Read command */
-static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos)
-{
-	ssize_t		      total, retval = 0;
-	ssize_t		      i, transfer;
-	int		      special;
-	struct st_modedef   * STm;
-	struct st_partstat  * STps;
-	struct osst_request * SRpnt = NULL;
-	struct osst_tape    * STp   = filp->private_data;
-	char		    * name  = tape_name(STp);
-
-
-	if (mutex_lock_interruptible(&STp->lock))
-		return (-ERESTARTSYS);
-
-	/*
-	 * If we are in the middle of error recovery, don't let anyone
-	 * else try and use this device.  Also, if error recovery fails, it
-	 * may try and take the device offline, in which case all further
-	 * access to the device is prohibited.
-	 */
-	if( !scsi_block_when_processing_errors(STp->device) ) {
-		retval = (-ENXIO);
-		goto out;
-	}
-	
-	if (STp->ready != ST_READY) {
-		if (STp->ready == ST_NO_TAPE)
-			retval = (-ENOMEDIUM);
-		else
-			retval = (-EIO);
-		goto out;
-	}
-	STm = &(STp->modes[STp->current_mode]);
-	if (!STm->defined) {
-		retval = (-ENXIO);
-		goto out;
-	}
-#if DEBUG
-	if (!STp->in_use) {
-		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
-		retval = (-EIO);
-		goto out;
-	}
-#endif
-	/* Must have initialized medium */
-	if (!STp->header_ok) {
-		retval = (-EIO);
-		goto out;
-	}
-
-	if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
-		STp->door_locked = ST_LOCKED_AUTO;
-
-	STps = &(STp->ps[STp->partition]);
-	if (STps->rw == ST_WRITING) {
-		retval = osst_flush_buffer(STp, &SRpnt, 0);
-		if (retval)
-			goto out;
-		STps->rw = ST_IDLE;
-		/* FIXME -- this may leave the tape without EOD and up2date headers */
-	}
-
-	if ((count % STp->block_size) != 0) {
-		printk(KERN_WARNING
-		    "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count,
-		    STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
-	}
-
-#if DEBUG
-	if (debugging && STps->eof != ST_NOEOF)
-		printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name,
-				     STps->eof, (STp->buffer)->buffer_bytes);
-#endif
-	if ((STp->buffer)->buffer_bytes == 0 &&
-	     STps->eof >= ST_EOD_1) {
-		if (STps->eof < ST_EOD) {
-			STps->eof += 1;
-			retval = 0;
-			goto out;
-		}
-		retval = (-EIO);  /* EOM or Blank Check */
-		goto out;
-	}
-
-	/* Check the buffer writability before any tape movement. Don't alter
-		 buffer data. */
-	if (copy_from_user(&i, buf, 1)             != 0 ||
-	    copy_to_user  (buf, &i, 1)             != 0 ||
-	    copy_from_user(&i, buf + count - 1, 1) != 0 ||
-	    copy_to_user  (buf + count - 1, &i, 1) != 0) {
-		retval = (-EFAULT);
-		goto out;
-	}
-
-	/* Loop until enough data in buffer or a special condition found */
-	for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) {
-
-		/* Get new data if the buffer is empty */
-		if ((STp->buffer)->buffer_bytes == 0) {
-			if (STps->eof == ST_FM_HIT)
-				break;
-			special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0);
-			if (special < 0) { 			/* No need to continue read */
-				STp->frame_in_buffer = 0;
-				retval = special;
-				goto out;
-			}
-		}
-
-		/* Move the data from driver buffer to user buffer */
-		if ((STp->buffer)->buffer_bytes > 0) {
-#if DEBUG
-			if (debugging && STps->eof != ST_NOEOF)
-			    printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name,
-						 STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total));
-#endif
-		       	/* force multiple of block size, note block_size may have been adjusted */
-			transfer = (((STp->buffer)->buffer_bytes < count - total ?
-				     (STp->buffer)->buffer_bytes : count - total)/
-					STp->block_size) * STp->block_size;
-
-			if (transfer == 0) {
-				printk(KERN_WARNING
-				  "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n",
-			   		name, count, STp->block_size < 1024?
-					STp->block_size:STp->block_size/1024,
-				       	STp->block_size<1024?'b':'k');
-				break;
-			}
-			i = from_buffer(STp->buffer, buf, transfer);
-			if (i)  {
-				retval = i;
-				goto out;
-			}
-			STp->logical_blk_num += transfer / STp->block_size;
-			STps->drv_block      += transfer / STp->block_size;
-			*ppos          += transfer;
-			buf                  += transfer;
-			total                += transfer;
-		}
- 
-		if ((STp->buffer)->buffer_bytes == 0) {
-#if DEBUG
-			if (debugging)
-				printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n",
-					       	name, STp->frame_seq_number);
-#endif
-			STp->frame_in_buffer = 0;
-			STp->frame_seq_number++;              /* frame to look for next time */
-		}
-	} /* for (total = 0, special = 0; total < count && !special; ) */
-
-	/* Change the eof state if no data from tape or buffer */
-	if (total == 0) {
-		if (STps->eof == ST_FM_HIT) {
-			STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM;
-			STps->drv_block = 0;
-			if (STps->drv_file >= 0)
-				STps->drv_file++;
-		}
-		else if (STps->eof == ST_EOD_1) {
-			STps->eof = ST_EOD_2;
-			if (STps->drv_block > 0 && STps->drv_file >= 0)
-				STps->drv_file++;
-			STps->drv_block = 0;
-		}
-		else if (STps->eof == ST_EOD_2)
-			STps->eof = ST_EOD;
-	}
-	else if (STps->eof == ST_FM)
-		STps->eof = ST_NOEOF;
-
-	retval = total;
-
-out:
-	if (SRpnt != NULL) osst_release_request(SRpnt);
-
-	mutex_unlock(&STp->lock);
-
-	return retval;
-}
-
-
-/* Set the driver options */
-static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name)
-{
-  printk(KERN_INFO
-"%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
-	 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
-	 STm->do_read_ahead);
-  printk(KERN_INFO
-"%s:I:    can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
-	 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
-  printk(KERN_INFO
-"%s:I:    defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
-	 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
-	 STp->scsi2_logical);
-  printk(KERN_INFO
-"%s:I:    sysv: %d\n", name, STm->sysv);
-#if DEBUG
-  printk(KERN_INFO
-	 "%s:D:    debugging: %d\n",
-	 name, debugging);
-#endif
-}
-
-
-static int osst_set_options(struct osst_tape *STp, long options)
-{
-	int		    value;
-	long		    code;
-	struct st_modedef * STm;
-	char		  * name = tape_name(STp);
-
-	STm = &(STp->modes[STp->current_mode]);
-	if (!STm->defined) {
-		memcpy(STm, &(STp->modes[0]), sizeof(*STm));
-		modes_defined = 1;
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n",
-					     name, STp->current_mode);
-#endif
-	}
-
-	code = options & MT_ST_OPTIONS;
-	if (code == MT_ST_BOOLEANS) {
-		STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
-		STm->do_async_writes  = (options & MT_ST_ASYNC_WRITES) != 0;
-		STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
-		STm->do_read_ahead    = (options & MT_ST_READ_AHEAD) != 0;
-		STp->two_fm	      = (options & MT_ST_TWO_FM) != 0;
-		STp->fast_mteom	      = (options & MT_ST_FAST_MTEOM) != 0;
-		STp->do_auto_lock     = (options & MT_ST_AUTO_LOCK) != 0;
-		STp->can_bsr          = (options & MT_ST_CAN_BSR) != 0;
-		STp->omit_blklims     = (options & MT_ST_NO_BLKLIMS) != 0;
-		if ((STp->device)->scsi_level >= SCSI_2)
-			STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
-		STp->scsi2_logical    = (options & MT_ST_SCSI2LOGICAL) != 0;
-		STm->sysv	      = (options & MT_ST_SYSV) != 0;
-#if DEBUG
-		debugging = (options & MT_ST_DEBUGGING) != 0;
-#endif
-		osst_log_options(STp, STm, name);
-	}
-	else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
-		value = (code == MT_ST_SETBOOLEANS);
-		if ((options & MT_ST_BUFFER_WRITES) != 0)
-			STm->do_buffer_writes = value;
-		if ((options & MT_ST_ASYNC_WRITES) != 0)
-			STm->do_async_writes = value;
-		if ((options & MT_ST_DEF_WRITES) != 0)
-			STm->defaults_for_writes = value;
-		if ((options & MT_ST_READ_AHEAD) != 0)
-			STm->do_read_ahead = value;
-		if ((options & MT_ST_TWO_FM) != 0)
-			STp->two_fm = value;
-		if ((options & MT_ST_FAST_MTEOM) != 0)
-			STp->fast_mteom = value;
-		if ((options & MT_ST_AUTO_LOCK) != 0)
-			STp->do_auto_lock = value;
-		if ((options & MT_ST_CAN_BSR) != 0)
-			STp->can_bsr = value;
-		if ((options & MT_ST_NO_BLKLIMS) != 0)
-			STp->omit_blklims = value;
-		if ((STp->device)->scsi_level >= SCSI_2 &&
-		    (options & MT_ST_CAN_PARTITIONS) != 0)
-			STp->can_partitions = value;
-		if ((options & MT_ST_SCSI2LOGICAL) != 0)
-			STp->scsi2_logical = value;
-		if ((options & MT_ST_SYSV) != 0)
-			STm->sysv = value;
-#if DEBUG
-		if ((options & MT_ST_DEBUGGING) != 0)
-			debugging = value;
-#endif
-		osst_log_options(STp, STm, name);
-	}
-	else if (code == MT_ST_WRITE_THRESHOLD) {
-		value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE;
-		if (value < 1 || value > osst_buffer_size) {
-			printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n",
-					     name, value);
-			return (-EIO);
-		}
-		STp->write_threshold = value;
-		printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n",
-				  name, value);
-	}
-	else if (code == MT_ST_DEF_BLKSIZE) {
-		value = (options & ~MT_ST_OPTIONS);
-		if (value == ~MT_ST_OPTIONS) {
-			STm->default_blksize = (-1);
-			printk(KERN_INFO "%s:I: Default block size disabled.\n", name);
-		}
-		else {
-			if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) {
-				printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n",
-							 name, value);
-				return (-EINVAL);
-			}
-			STm->default_blksize = value;
-			printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n",
-					  name, STm->default_blksize);
-		}
-	}
-	else if (code == MT_ST_TIMEOUTS) {
-		value = (options & ~MT_ST_OPTIONS);
-		if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
-			STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
-			printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name,
-					     (value & ~MT_ST_SET_LONG_TIMEOUT));
-		}
-		else {
-			STp->timeout = value * HZ;
-			printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value);
-		}
-	}
-	else if (code == MT_ST_DEF_OPTIONS) {
-		code = (options & ~MT_ST_CLEAR_DEFAULT);
-		value = (options & MT_ST_CLEAR_DEFAULT);
-		if (code == MT_ST_DEF_DENSITY) {
-			if (value == MT_ST_CLEAR_DEFAULT) {
-				STm->default_density = (-1);
-				printk(KERN_INFO "%s:I: Density default disabled.\n", name);
-			}
-			else {
-				STm->default_density = value & 0xff;
-				printk(KERN_INFO "%s:I: Density default set to %x\n",
-						  name, STm->default_density);
-			}
-		}
-		else if (code == MT_ST_DEF_DRVBUFFER) {
-			if (value == MT_ST_CLEAR_DEFAULT) {
-				STp->default_drvbuffer = 0xff;
-				printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name);
-			}
-			else {
-				STp->default_drvbuffer = value & 7;
-				printk(KERN_INFO "%s:I: Drive buffer default set to %x\n",
-						  name, STp->default_drvbuffer);
-			}
-		}
-		else if (code == MT_ST_DEF_COMPRESSION) {
-			if (value == MT_ST_CLEAR_DEFAULT) {
-				STm->default_compression = ST_DONT_TOUCH;
-				printk(KERN_INFO "%s:I: Compression default disabled.\n", name);
-			}
-			else {
-				STm->default_compression = (value & 1 ? ST_YES : ST_NO);
-				printk(KERN_INFO "%s:I: Compression default set to %x\n",
-						  name, (value & 1));
-			}
-		}
-	}
-	else
-		return (-EIO);
-
-	return 0;
-}
-
-
-/* Internal ioctl function */
-static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt,
-			     unsigned int cmd_in, unsigned long arg)
-{
-	int			timeout;
-	long			ltmp;
-	int			i, ioctl_result;
-	int			chg_eof = 1;
-	unsigned char		cmd[MAX_COMMAND_SIZE];
-	struct osst_request   * SRpnt = * aSRpnt;
-	struct st_partstat    * STps;
-	int			fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num;
-	int			datalen = 0, direction = DMA_NONE;
-	char		      * name = tape_name(STp);
-
-	if (STp->ready != ST_READY && cmd_in != MTLOAD) {
-		if (STp->ready == ST_NO_TAPE)
-			return (-ENOMEDIUM);
-		else
-			return (-EIO);
-	}
-	timeout = STp->long_timeout;
-	STps = &(STp->ps[STp->partition]);
-	fileno = STps->drv_file;
-	blkno = STps->drv_block;
-	at_sm = STps->at_sm;
-	frame_seq_numbr = STp->frame_seq_number;
-	logical_blk_num = STp->logical_blk_num;
-
-	memset(cmd, 0, MAX_COMMAND_SIZE);
-	switch (cmd_in) {
-	 case MTFSFM:
-		chg_eof = 0; /* Changed from the FSF after this */
-		/* fall through */
-	 case MTFSF:
-		if (STp->raw)
-		   return (-EIO);
-		if (STp->linux_media)
-		   ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg);
-		else
-		   ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg);
-		if (fileno >= 0)
-		   fileno += arg;
-		blkno = 0;
-		at_sm &= (arg == 0);
-		goto os_bypass;
-
-	 case MTBSF:
-		chg_eof = 0; /* Changed from the FSF after this */
-		/* fall through */
-	 case MTBSFM:
-		if (STp->raw)
-		   return (-EIO);
-		ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg);
-		if (fileno >= 0)
-		   fileno -= arg;
-		blkno = (-1);  /* We can't know the block number */
-		at_sm &= (arg == 0);
-		goto os_bypass;
-
-	 case MTFSR:
-	 case MTBSR:
-#if DEBUG
-		if (debugging)
-		   printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n",
-				name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num);
-#endif
-		if (cmd_in == MTFSR) {
-		   logical_blk_num += arg;
-		   if (blkno >= 0) blkno += arg;
-		}
-		else {
-		   logical_blk_num -= arg;
-		   if (blkno >= 0) blkno -= arg;
-		}
-		ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num);
-		fileno = STps->drv_file;
-		blkno  = STps->drv_block;
-		at_sm &= (arg == 0);
-		goto os_bypass;
-
-	 case MTFSS:
-		cmd[0] = SPACE;
-		cmd[1] = 0x04; /* Space Setmarks */   /* FIXME -- OS can't do this? */
-		cmd[2] = (arg >> 16);
-		cmd[3] = (arg >> 8);
-		cmd[4] = arg;
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name,
-		cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
-#endif
-		if (arg != 0) {
-			blkno = fileno = (-1);
-			at_sm = 1;
-		}
-		break;
-	 case MTBSS:
-		cmd[0] = SPACE;
-		cmd[1] = 0x04; /* Space Setmarks */   /* FIXME -- OS can't do this? */
-		ltmp = (-arg);
-		cmd[2] = (ltmp >> 16);
-		cmd[3] = (ltmp >> 8);
-		cmd[4] = ltmp;
-#if DEBUG
-		if (debugging) {
-			if (cmd[2] & 0x80)
-			   ltmp = 0xff000000;
-			ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
-			printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n",
-						name, (-ltmp));
-		 }
-#endif
-		 if (arg != 0) {
-			blkno = fileno = (-1);
-			at_sm = 1;
-		 }
-		 break;
-	 case MTWEOF:
-		 if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
-			STp->write_type = OS_WRITE_DATA;
-			ioctl_result = osst_flush_write_buffer(STp, &SRpnt);
-		 } else
-			ioctl_result = 0;
-#if DEBUG
-		 if (debugging) 
-			   printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg);
-#endif
-		 for (i=0; i<arg; i++)
-			ioctl_result |= osst_write_filemark(STp, &SRpnt);
-		 if (fileno >= 0) fileno += arg;
-		 if (blkno  >= 0) blkno   = 0;
-		 goto os_bypass;
-
-	 case MTWSM:
-		 if (STp->write_prot)
-			return (-EACCES);
-		 if (!STp->raw)
-			return 0;
-		 cmd[0] = WRITE_FILEMARKS;   /* FIXME -- need OS version */
-		 if (cmd_in == MTWSM)
-			 cmd[1] = 2;
-		 cmd[2] = (arg >> 16);
-		 cmd[3] = (arg >> 8);
-		 cmd[4] = arg;
-		 timeout = STp->timeout;
-#if DEBUG
-		 if (debugging) 
-			   printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name,
-				  cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
-#endif
-		 if (fileno >= 0)
-			fileno += arg;
-		 blkno = 0;
-		 at_sm = (cmd_in == MTWSM);
-		 break;
-	 case MTOFFL:
-	 case MTLOAD:
-	 case MTUNLOAD:
-	 case MTRETEN:
-		 cmd[0] = START_STOP;
-		 cmd[1] = 1;			/* Don't wait for completion */
-		 if (cmd_in == MTLOAD) {
-		     if (STp->ready == ST_NO_TAPE)
-			 cmd[4] = 4;		/* open tray */
-		      else
-			 cmd[4] = 1;		/* load */
-		 }
-		 if (cmd_in == MTRETEN)
-			 cmd[4] = 3;		/* retension then mount */
-		 if (cmd_in == MTOFFL)
-			 cmd[4] = 4;		/* rewind then eject */
-		 timeout = STp->timeout;
-#if DEBUG
-		 if (debugging) {
-			 switch (cmd_in) {
-				 case MTUNLOAD:
-					 printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name);
-					 break;
-				 case MTLOAD:
-					 printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name);
-					 break;
-				 case MTRETEN:
-					 printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name);
-					 break;
-				 case MTOFFL:
-					 printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name);
-					 break;
-			 }
-		 }
-#endif
-       fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
-		 break;
-	 case MTNOP:
-#if DEBUG
-		 if (debugging)
-			 printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name);
-#endif
-		 return 0;  /* Should do something ? */
-		 break;
-	 case MTEOM:
-#if DEBUG
-		if (debugging)
-		   printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name);
-#endif
-		if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) ||
-			    (osst_get_logical_frame(STp, &SRpnt, -1, 0)               < 0)) {
-		   ioctl_result = -EIO;
-		   goto os_bypass;
-		}
-		if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) {
-#if DEBUG
-		   printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name);
-#endif
-		   ioctl_result = -EIO;
-		   goto os_bypass;
-		}
-		ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0);
-		fileno = STp->filemark_cnt;
-		blkno  = at_sm = 0;
-		goto os_bypass;
-
-	 case MTERASE:
-		if (STp->write_prot)
-		   return (-EACCES);
-		ioctl_result = osst_reset_header(STp, &SRpnt);
-		i = osst_write_eod(STp, &SRpnt);
-		if (i < ioctl_result) ioctl_result = i;
-		i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos);
-		if (i < ioctl_result) ioctl_result = i;
-		fileno = blkno = at_sm = 0 ;
-		goto os_bypass;
-
-	 case MTREW:
-		cmd[0] = REZERO_UNIT; /* rewind */
-		cmd[1] = 1;
-#if DEBUG
-		if (debugging)
-		   printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]);
-#endif
-		fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
-		break;
-
-	 case MTSETBLK:           /* Set block length */
-		 if ((STps->drv_block == 0 )			  &&
-		     !STp->dirty				  &&
-		     ((STp->buffer)->buffer_bytes == 0)		  &&
-		     ((arg & MT_ST_BLKSIZE_MASK) >= 512 )	  && 
-		     ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) &&
-		     !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))  ) {
-			 /*
-			  * Only allowed to change the block size if you opened the
-			  * device at the beginning of a file before writing anything.
-			  * Note, that when reading, changing block_size is futile,
-			  * as the size used when writing overrides it.
-			  */
-			 STp->block_size = (arg & MT_ST_BLKSIZE_MASK);
-			 printk(KERN_INFO "%s:I: Block size set to %d bytes.\n",
-					   name, STp->block_size);
-			 return 0;
-		 }
-		/* fall through */
-	 case MTSETDENSITY:       /* Set tape density */
-	 case MTSETDRVBUFFER:     /* Set drive buffering */
-	 case SET_DENS_AND_BLK:   /* Set density and block size */
-		 chg_eof = 0;
-		 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
-			 return (-EIO);       /* Not allowed if data in buffer */
-		 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
-		     (arg & MT_ST_BLKSIZE_MASK) != 0                    &&
-		     (arg & MT_ST_BLKSIZE_MASK) != STp->block_size       ) {
-			 printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n",
-						name, (int)(arg & MT_ST_BLKSIZE_MASK),
-						(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now");
-			 return (-EINVAL);
-		 }
-		 return 0;  /* FIXME silently ignore if block size didn't change */
-
-	 default:
-		return (-ENOSYS);
-	}
-
-	SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1);
-
-	ioctl_result = (STp->buffer)->syscall_result;
-
-	if (!SRpnt) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name);
-#endif
-		return ioctl_result;
-	}
-
-	if (!ioctl_result) {  /* SCSI command successful */
-		STp->frame_seq_number = frame_seq_numbr;
-		STp->logical_blk_num  = logical_blk_num;
-	}
-
-os_bypass:
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result);
-#endif
-
-	if (!ioctl_result) {				/* success */
-
-		if (cmd_in == MTFSFM) {
-			 fileno--;
-			 blkno--;
-		}
-		if (cmd_in == MTBSFM) {
-			 fileno++;
-			 blkno++;
-		}
-		STps->drv_block = blkno;
-		STps->drv_file = fileno;
-		STps->at_sm = at_sm;
-
-		if (cmd_in == MTEOM)
-			STps->eof = ST_EOD;
-		else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) {
-			ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1);
-			STps->drv_block++;
-			STp->logical_blk_num++;
-			STp->frame_seq_number++;
-			STp->frame_in_buffer = 0;
-			STp->buffer->read_pointer = 0;
-		}
-		else if (cmd_in == MTFSF)
-			STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM;
-		else if (chg_eof)
-			STps->eof = ST_NOEOF;
-
-		if (cmd_in == MTOFFL || cmd_in == MTUNLOAD)
-			STp->rew_at_close = 0;
-		else if (cmd_in == MTLOAD) {
-			for (i=0; i < ST_NBR_PARTITIONS; i++) {
-			    STp->ps[i].rw = ST_IDLE;
-			    STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */
-			}
-			STp->partition = 0;
-		}
-
-		if (cmd_in == MTREW) {
-			ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); 
-			if (ioctl_result > 0)
-				ioctl_result = 0;
-		}
-
-	} else if (cmd_in == MTBSF || cmd_in == MTBSFM ) {
-		if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0)
-			STps->drv_file = STps->drv_block = -1;
-		else
-			STps->drv_file = STps->drv_block = 0;
-		STps->eof = ST_NOEOF;
-	} else if (cmd_in == MTFSF || cmd_in == MTFSFM) {
-		if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0)
-			STps->drv_file = STps->drv_block = -1;
-		else {
-			STps->drv_file  = STp->filemark_cnt;
-			STps->drv_block = 0;
-		}
-		STps->eof = ST_EOD;
-	} else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) {
-		STps->drv_file = STps->drv_block = (-1);
-		STps->eof = ST_NOEOF;
-		STp->header_ok = 0;
-	} else if (cmd_in == MTERASE) {
-		STp->header_ok = 0;
-	} else if (SRpnt) {  /* SCSI command was not completely successful. */
-		if (SRpnt->sense[2] & 0x40) {
-			STps->eof = ST_EOM_OK;
-			STps->drv_block = 0;
-		}
-		if (chg_eof)
-			STps->eof = ST_NOEOF;
-
-		if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK)
-			STps->eof = ST_EOD;
-
-		if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60))
-			ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
-	}
-	*aSRpnt = SRpnt;
-
-	return ioctl_result;
-}
-
-
-/* Open the device */
-static int __os_scsi_tape_open(struct inode * inode, struct file * filp)
-{
-	unsigned short	      flags;
-	int		      i, b_size, new_session = 0, retval = 0;
-	unsigned char	      cmd[MAX_COMMAND_SIZE];
-	struct osst_request * SRpnt = NULL;
-	struct osst_tape    * STp;
-	struct st_modedef   * STm;
-	struct st_partstat  * STps;
-	char		    * name;
-	int		      dev  = TAPE_NR(inode);
-	int		      mode = TAPE_MODE(inode);
-
-	/*
-	 * We really want to do nonseekable_open(inode, filp); here, but some
-	 * versions of tar incorrectly call lseek on tapes and bail out if that
-	 * fails.  So we disallow pread() and pwrite(), but permit lseeks.
-	 */
-	filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
-
-	write_lock(&os_scsi_tapes_lock);
-	if (dev >= osst_max_dev || os_scsi_tapes == NULL ||
-	    (STp = os_scsi_tapes[dev]) == NULL || !STp->device) {
-		write_unlock(&os_scsi_tapes_lock);
-		return (-ENXIO);
-	}
-
-	name = tape_name(STp);
-
-	if (STp->in_use) {
-		write_unlock(&os_scsi_tapes_lock);
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name);
-#endif
-		return (-EBUSY);
-	}
-	if (scsi_device_get(STp->device)) {
-		write_unlock(&os_scsi_tapes_lock);
-#if DEBUG
-                printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name);
-#endif
-		return (-ENXIO);
-	}
-	filp->private_data = STp;
-	STp->in_use = 1;
-	write_unlock(&os_scsi_tapes_lock);
-	STp->rew_at_close = TAPE_REWIND(inode);
-
-	if( !scsi_block_when_processing_errors(STp->device) ) {
-		return -ENXIO;
-	}
-
-	if (mode != STp->current_mode) {
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n",
-					       name, STp->current_mode, mode);
-#endif
-		new_session = 1;
-		STp->current_mode = mode;
-	}
-	STm = &(STp->modes[STp->current_mode]);
-
-	flags = filp->f_flags;
-	STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY);
-
-	STp->raw = TAPE_IS_RAW(inode);
-	if (STp->raw)
-		STp->header_ok = 0;
-
-	/* Allocate data segments for this device's tape buffer */
-	if (!enlarge_buffer(STp->buffer, STp->restr_dma)) {
-		printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name);
-		retval = (-EOVERFLOW);
-		goto err_out;
-	}
-	if (STp->buffer->buffer_size >= OS_FRAME_SIZE) {
-		for (i = 0, b_size = 0; 
-		     (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE); 
-		     b_size += STp->buffer->sg[i++].length);
-		STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size);
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name,
-			STp->buffer->b_data, page_address(STp->buffer->sg[0].page));
-		printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name,
-			 STp->buffer->aux, i, page_address(STp->buffer->sg[i].page));
-#endif
-	} else {
-		STp->buffer->aux = NULL; /* this had better never happen! */
-		printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE);
-		retval = (-EIO);
-		goto err_out;
-	}
-	STp->buffer->writing = 0;
-	STp->buffer->syscall_result = 0;
-	STp->dirty = 0;
-	for (i=0; i < ST_NBR_PARTITIONS; i++) {
-		STps = &(STp->ps[i]);
-		STps->rw = ST_IDLE;
-	}
-	STp->ready = ST_READY;
-#if DEBUG
-	STp->nbr_waits = STp->nbr_finished = 0;
-#endif
-
-	memset (cmd, 0, MAX_COMMAND_SIZE);
-	cmd[0] = TEST_UNIT_READY;
-
-	SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
-	if (!SRpnt) {
-		retval = (STp->buffer)->syscall_result;		/* FIXME - valid? */
-		goto err_out;
-	}
-	if ((SRpnt->sense[0] & 0x70) == 0x70      &&
-	    (SRpnt->sense[2] & 0x0f) == NOT_READY &&
-	     SRpnt->sense[12]        == 4         ) {
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]);
-#endif
-		if (filp->f_flags & O_NONBLOCK) {
-			retval = -EAGAIN;
-			goto err_out;
-		}
-		if (SRpnt->sense[13] == 2) {	/* initialize command required (LOAD) */
-			memset (cmd, 0, MAX_COMMAND_SIZE);
-        		cmd[0] = START_STOP;
-			cmd[1] = 1;
-			cmd[4] = 1;
-			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
-					     STp->timeout, MAX_RETRIES, 1);
-		}
-		osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0);
-	}
-	if ((SRpnt->sense[0] & 0x70) == 0x70 &&
-	    (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name);
-#endif
-		STp->header_ok = 0;
-
-		for (i=0; i < 10; i++) {
-
-			memset (cmd, 0, MAX_COMMAND_SIZE);
-			cmd[0] = TEST_UNIT_READY;
-
-			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
-					     STp->timeout, MAX_RETRIES, 1);
-			if ((SRpnt->sense[0] & 0x70) != 0x70 ||
-			    (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION)
-				break;
-		}
-
-		STp->pos_unknown = 0;
-		STp->partition = STp->new_partition = 0;
-		if (STp->can_partitions)
-			STp->nbr_partitions = 1;  /* This guess will be updated later if necessary */
-		for (i=0; i < ST_NBR_PARTITIONS; i++) {
-			STps = &(STp->ps[i]);
-			STps->rw = ST_IDLE;		/* FIXME - seems to be redundant... */
-			STps->eof = ST_NOEOF;
-			STps->at_sm = 0;
-			STps->last_block_valid = 0;
-			STps->drv_block = 0;
-			STps->drv_file = 0 ;
-		}
-		new_session = 1;
-		STp->recover_count = 0;
-		STp->abort_count = 0;
-	}
-	/*
-	 * if we have valid headers from before, and the drive/tape seem untouched,
-	 * open without reconfiguring and re-reading the headers
-	 */
-	if (!STp->buffer->syscall_result && STp->header_ok &&
-	    !SRpnt->result && SRpnt->sense[0] == 0) {
-
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = MODE_SENSE;
-		cmd[1] = 8;
-		cmd[2] = VENDOR_IDENT_PAGE;
-		cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
-		SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
-
-		if (STp->buffer->syscall_result                     ||
-		    STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' ||
-		    STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' ||
-		    STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' ||
-		    STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4'  ) {
-#if DEBUG
-			printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name,
-			  STp->buffer->b_data[MODE_HEADER_LENGTH + 2],
-			  STp->buffer->b_data[MODE_HEADER_LENGTH + 3],
-			  STp->buffer->b_data[MODE_HEADER_LENGTH + 4],
-			  STp->buffer->b_data[MODE_HEADER_LENGTH + 5]);
-#endif
-			STp->header_ok = 0;
-		}
-		i = STp->first_frame_position;
-		if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) {
-			if (STp->door_locked == ST_UNLOCKED) {
-				if (do_door_lock(STp, 1))
-					printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
-				else
-					STp->door_locked = ST_LOCKED_AUTO;
-			}
-			if (!STp->frame_in_buffer) {
-				STp->block_size = (STm->default_blksize > 0) ?
-							STm->default_blksize : OS_DATA_SIZE;
-				STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
-			}
-			STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size;
-			STp->fast_open = 1;
-			osst_release_request(SRpnt);
-			return 0;
-		}
-#if DEBUG
-		if (i != STp->first_frame_position)
-			printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n",
-						name, i, STp->first_frame_position);
-#endif
-		STp->header_ok = 0;
-	}
-	STp->fast_open = 0;
-
-	if ((STp->buffer)->syscall_result != 0 &&   /* in all error conditions except no medium */ 
-	    (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) {
-
-		memset(cmd, 0, MAX_COMMAND_SIZE);
-		cmd[0] = MODE_SELECT;
-		cmd[1] = 0x10;
-		cmd[4] = 4 + MODE_HEADER_LENGTH;
-
-		(STp->buffer)->b_data[0] = cmd[4] - 1;
-		(STp->buffer)->b_data[1] = 0;			/* Medium Type - ignoring */
-		(STp->buffer)->b_data[2] = 0;			/* Reserved */
-		(STp->buffer)->b_data[3] = 0;			/* Block Descriptor Length */
-		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f;
-		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1;
-		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2;
-		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3;
-
-#if DEBUG
-		printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name);
-#endif
-		SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
-
-		STp->header_ok = 0;
-
-		for (i=0; i < 10; i++) {
-
-			memset (cmd, 0, MAX_COMMAND_SIZE);
-			cmd[0] = TEST_UNIT_READY;
-
-			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
-						    STp->timeout, MAX_RETRIES, 1);
-			if ((SRpnt->sense[0] & 0x70) != 0x70 ||
-			    (SRpnt->sense[2] & 0x0f) == NOT_READY)
-			break;
-
-			if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) {
-				int j;
-
-				STp->pos_unknown = 0;
-				STp->partition = STp->new_partition = 0;
-				if (STp->can_partitions)
-					STp->nbr_partitions = 1;  /* This guess will be updated later if necessary */
-				for (j = 0; j < ST_NBR_PARTITIONS; j++) {
-					STps = &(STp->ps[j]);
-					STps->rw = ST_IDLE;
-					STps->eof = ST_NOEOF;
-					STps->at_sm = 0;
-					STps->last_block_valid = 0;
-					STps->drv_block = 0;
-					STps->drv_file = 0 ;
-				}
-				new_session = 1;
-			}
-		}
-	}
-
-	if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0))		/* FIXME - not allowed with NOBLOCK */
-		 printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name);
-
-	if ((STp->buffer)->syscall_result != 0) {
-		if ((STp->device)->scsi_level >= SCSI_2 &&
-		    (SRpnt->sense[0] & 0x70) == 0x70 &&
-		    (SRpnt->sense[2] & 0x0f) == NOT_READY &&
-		     SRpnt->sense[12] == 0x3a) { /* Check ASC */
-			STp->ready = ST_NO_TAPE;
-		} else
-			STp->ready = ST_NOT_READY;
-		osst_release_request(SRpnt);
-		SRpnt = NULL;
-		STp->density = 0;   	/* Clear the erroneous "residue" */
-		STp->write_prot = 0;
-		STp->block_size = 0;
-		STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
-		STp->partition = STp->new_partition = 0;
-		STp->door_locked = ST_UNLOCKED;
-		return 0;
-	}
-
-	osst_configure_onstream(STp, &SRpnt);
-
-	STp->block_size = STp->raw ? OS_FRAME_SIZE : (
-			     (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE);
-	STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size;
-	STp->buffer->buffer_bytes  =
-	STp->buffer->read_pointer  =
-	STp->frame_in_buffer       = 0;
-
-#if DEBUG
-	if (debugging)
-		printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n",
-		     name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size,
-		     (STp->buffer)->buffer_blocks);
-#endif
-
-	if (STp->drv_write_prot) {
-		STp->write_prot = 1;
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Write protected\n", name);
-#endif
-		if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) {
-			retval = (-EROFS);
-			goto err_out;
-		}
-	}
-
-	if (new_session) {  /* Change the drive parameters for the new mode */
-#if DEBUG
-		if (debugging)
-	printk(OSST_DEB_MSG "%s:D: New Session\n", name);
-#endif
-		STp->density_changed = STp->blksize_changed = 0;
-		STp->compression_changed = 0;
-	}
-
-	/*
-	 * properly position the tape and check the ADR headers
-	 */
-	if (STp->door_locked == ST_UNLOCKED) {
-		 if (do_door_lock(STp, 1))
-			printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
-		 else
-			STp->door_locked = ST_LOCKED_AUTO;
-	}
-
-	osst_analyze_headers(STp, &SRpnt);
-
-	osst_release_request(SRpnt);
-	SRpnt = NULL;
-
-	return 0;
-
-err_out:
-	if (SRpnt != NULL)
-		osst_release_request(SRpnt);
-	normalize_buffer(STp->buffer);
-	STp->header_ok = 0;
-	STp->in_use = 0;
-	scsi_device_put(STp->device);
-
-	return retval;
-}
-
-/* BKL pushdown: spaghetti avoidance wrapper */
-static int os_scsi_tape_open(struct inode * inode, struct file * filp)
-{
-	int ret;
-
-	mutex_lock(&osst_int_mutex);
-	ret = __os_scsi_tape_open(inode, filp);
-	mutex_unlock(&osst_int_mutex);
-	return ret;
-}
-
-
-
-/* Flush the tape buffer before close */
-static int os_scsi_tape_flush(struct file * filp, fl_owner_t id)
-{
-	int		      result = 0, result2;
-	struct osst_tape    * STp    = filp->private_data;
-	struct st_modedef   * STm    = &(STp->modes[STp->current_mode]);
-	struct st_partstat  * STps   = &(STp->ps[STp->partition]);
-	struct osst_request * SRpnt  = NULL;
-	char		    * name   = tape_name(STp);
-
-	if (file_count(filp) > 1)
-		return 0;
-
-	if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
-		STp->write_type = OS_WRITE_DATA;
-		result = osst_flush_write_buffer(STp, &SRpnt);
-		if (result != 0 && result != (-ENOSPC))
-			goto out;
-	}
-	if ( STps->rw >= ST_WRITING && !STp->pos_unknown) {
-
-#if DEBUG
-		if (debugging) {
-			printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n",
-					       name, (long)(filp->f_pos));
-			printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n",
-					       name, STp->nbr_waits, STp->nbr_finished);
-		}
-#endif
-		result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close));
-#if DEBUG
-		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n",
-					       name, 1+STp->two_fm);
-#endif
-	}
-	else if (!STp->rew_at_close) {
-		STps = &(STp->ps[STp->partition]);
-		if (!STm->sysv || STps->rw != ST_READING) {
-			if (STp->can_bsr)
-				result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */
-			else if (STps->eof == ST_FM_HIT) {
-				result = cross_eof(STp, &SRpnt, 0);
-					if (result) {
-						if (STps->drv_file >= 0)
-							STps->drv_file++;
-						STps->drv_block = 0;
-						STps->eof = ST_FM;
-					}
-					else
-						STps->eof = ST_NOEOF;
-			}
-		}
-		else if ((STps->eof == ST_NOEOF &&
-			  !(result = cross_eof(STp, &SRpnt, 1))) ||
-			 STps->eof == ST_FM_HIT) {
-			if (STps->drv_file >= 0)
-				STps->drv_file++;
-			STps->drv_block = 0;
-			STps->eof = ST_FM;
-		}
-	}
-
-out:
-	if (STp->rew_at_close) {
-		result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
-		STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
-		if (result == 0 && result2 < 0)
-			result = result2;
-	}
-	if (SRpnt) osst_release_request(SRpnt);
-
-	if (STp->abort_count || STp->recover_count) {
-		printk(KERN_INFO "%s:I:", name);
-		if (STp->abort_count)
-			printk(" %d unrecovered errors", STp->abort_count);
-		if (STp->recover_count)
-			printk(" %d recovered errors", STp->recover_count);
-		if (STp->write_count)
-			printk(" in %d frames written", STp->write_count);
-		if (STp->read_count)
-			printk(" in %d frames read", STp->read_count);
-		printk("\n");
-		STp->recover_count = 0;
-		STp->abort_count   = 0;
-	}
-	STp->write_count = 0;
-	STp->read_count  = 0;
-
-	return result;
-}
-
-
-/* Close the device and release it */
-static int os_scsi_tape_close(struct inode * inode, struct file * filp)
-{
-	int		      result = 0;
-	struct osst_tape    * STp    = filp->private_data;
-
-	if (STp->door_locked == ST_LOCKED_AUTO)
-		do_door_lock(STp, 0);
-
-	if (STp->raw)
-		STp->header_ok = 0;
-	
-	normalize_buffer(STp->buffer);
-	write_lock(&os_scsi_tapes_lock);
-	STp->in_use = 0;
-	write_unlock(&os_scsi_tapes_lock);
-
-	scsi_device_put(STp->device);
-
-	return result;
-}
-
-
-/* The ioctl command */
-static long osst_ioctl(struct file * file,
-	 unsigned int cmd_in, unsigned long arg)
-{
-	int		      i, cmd_nr, cmd_type, blk, retval = 0;
-	struct st_modedef   * STm;
-	struct st_partstat  * STps;
-	struct osst_request * SRpnt = NULL;
-	struct osst_tape    * STp   = file->private_data;
-	char		    * name  = tape_name(STp);
-	void	    __user  * p     = (void __user *)arg;
-
-	mutex_lock(&osst_int_mutex);
-	if (mutex_lock_interruptible(&STp->lock)) {
-		mutex_unlock(&osst_int_mutex);
-		return -ERESTARTSYS;
-	}
-
-#if DEBUG
-	if (debugging && !STp->in_use) {
-		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
-		retval = (-EIO);
-		goto out;
-	}
-#endif
-	STm = &(STp->modes[STp->current_mode]);
-	STps = &(STp->ps[STp->partition]);
-
-	/*
-	 * If we are in the middle of error recovery, don't let anyone
-	 * else try and use this device.  Also, if error recovery fails, it
-	 * may try and take the device offline, in which case all further
-	 * access to the device is prohibited.
-	 */
-	retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
-			file->f_flags & O_NDELAY);
-	if (retval)
-		goto out;
-
-	cmd_type = _IOC_TYPE(cmd_in);
-	cmd_nr   = _IOC_NR(cmd_in);
-#if DEBUG
-	printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name,
-			    cmd_type, cmd_nr, STp->raw?"raw":"normal");
-#endif
-	if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
-		struct mtop mtc;
-		int    auto_weof = 0;
-
-		if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
-			retval = (-EINVAL);
-			goto out;
-		}
-
-		i = copy_from_user((char *) &mtc, p, sizeof(struct mtop));
-		if (i) {
-			retval = (-EFAULT);
-			goto out;
-		}
-
-		if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
-			printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name);
-			retval = (-EPERM);
-			goto out;
-		}
-
-		if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
-			retval = (-ENXIO);
-			goto out;
-		}
-
-		if (!STp->pos_unknown) {
-
-			if (STps->eof == ST_FM_HIT) {
-				if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) {
-					mtc.mt_count -= 1;
-					if (STps->drv_file >= 0)
-						STps->drv_file += 1;
-				}
-				else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
-					mtc.mt_count += 1;
-					if (STps->drv_file >= 0)
-						STps->drv_file += 1;
-				}
-			}
-
-			if (mtc.mt_op == MTSEEK) {
-				/* Old position must be restored if partition will be changed */
-				i = !STp->can_partitions || (STp->new_partition != STp->partition);
-			}
-			else {
-				i = mtc.mt_op == MTREW   || mtc.mt_op == MTOFFL ||
-				    mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM  ||
-				    mtc.mt_op == MTLOCK  || mtc.mt_op == MTLOAD ||
-				    mtc.mt_op == MTFSF   || mtc.mt_op == MTFSFM ||
-				    mtc.mt_op == MTBSF   || mtc.mt_op == MTBSFM ||
-				    mtc.mt_op == MTCOMPRESSION;
-			}
-			i = osst_flush_buffer(STp, &SRpnt, i);
-			if (i < 0) {
-				retval = i;
-				goto out;
-			}
-		}
-		else {
-			/*
-			 * If there was a bus reset, block further access
-			 * to this device.  If the user wants to rewind the tape,
-			 * then reset the flag and allow access again.
-			 */
-			if(mtc.mt_op != MTREW   &&
-			   mtc.mt_op != MTOFFL  &&
-			   mtc.mt_op != MTRETEN &&
-			   mtc.mt_op != MTERASE &&
-			   mtc.mt_op != MTSEEK  &&
-			   mtc.mt_op != MTEOM)   {
-				retval = (-EIO);
-				goto out;
-			}
-			reset_state(STp);
-			/* remove this when the midlevel properly clears was_reset */
-			STp->device->was_reset = 0;
-		}
-
-		if (mtc.mt_op != MTCOMPRESSION  && mtc.mt_op != MTLOCK         &&
-		    mtc.mt_op != MTNOP          && mtc.mt_op != MTSETBLK       &&
-		    mtc.mt_op != MTSETDENSITY   && mtc.mt_op != MTSETDRVBUFFER && 
-		    mtc.mt_op != MTMKPART       && mtc.mt_op != MTSETPART      &&
-		    mtc.mt_op != MTWEOF         && mtc.mt_op != MTWSM           ) {
-
-			/*
-			 * The user tells us to move to another position on the tape.
-			 * If we were appending to the tape content, that would leave
-			 * the tape without proper end, in that case write EOD and
-			 * update the header to reflect its position.
-			 */
-#if DEBUG
-			printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name,
-					STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle",
-					STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number,
-					STp->logical_blk_num, STps->drv_file, STps->drv_block );
-#endif
-			if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) {
-				auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) &&
-							!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
-				i = osst_write_trailer(STp, &SRpnt,
-							!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
-#if DEBUG
-				printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n",
-						name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos,
-						STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block );
-#endif
-				if (i < 0) {
-					retval = i;
-					goto out;
-				}
-			}
-			STps->rw = ST_IDLE;
-		}
-
-		if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
-			do_door_lock(STp, 0);  /* Ignore result! */
-
-		if (mtc.mt_op == MTSETDRVBUFFER &&
-		   (mtc.mt_count & MT_ST_OPTIONS) != 0) {
-			retval = osst_set_options(STp, mtc.mt_count);
-			goto out;
-		}
-
-		if (mtc.mt_op == MTSETPART) {
-			if (mtc.mt_count >= STp->nbr_partitions)
-				retval = -EINVAL;
-			else {
-				STp->new_partition = mtc.mt_count;
-				retval = 0;
-			}
-			goto out;
-		}
-
-		if (mtc.mt_op == MTMKPART) {
-			if (!STp->can_partitions) {
-				retval = (-EINVAL);
-				goto out;
-			}
-			if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*||
-			    (i = partition_tape(inode, mtc.mt_count)) < 0*/) {
-				retval = i;
-				goto out;
-			}
-			for (i=0; i < ST_NBR_PARTITIONS; i++) {
-				STp->ps[i].rw = ST_IDLE;
-				STp->ps[i].at_sm = 0;
-				STp->ps[i].last_block_valid = 0;
-			}
-			STp->partition = STp->new_partition = 0;
-			STp->nbr_partitions = 1;  /* Bad guess ?-) */
-			STps->drv_block = STps->drv_file = 0;
-			retval = 0;
-			goto out;
-	 	}
-
-		if (mtc.mt_op == MTSEEK) {
-			if (STp->raw)
-				i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0);
-			else
-				i = osst_seek_sector(STp, &SRpnt, mtc.mt_count);
-			if (!STp->can_partitions)
-				STp->ps[0].rw = ST_IDLE;
-			retval = i;
-			goto out;
-		}
- 
-		if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
-			retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
-			goto out;
-		}
-
-		if (auto_weof)
-			cross_eof(STp, &SRpnt, 0);
-
-		if (mtc.mt_op == MTCOMPRESSION)
-			retval = -EINVAL;       /* OnStream drives don't have compression hardware */
-		else
-			/* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS
-			 * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */
-			retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count);
-		goto out;
-	}
-
-	if (!STm->defined) {
-		retval = (-ENXIO);
-		goto out;
-	}
-
-	if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) {
-		retval = i;
-		goto out;
-	}
-
-	if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
-		struct mtget mt_status;
-
-		if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
-			 retval = (-EINVAL);
-			 goto out;
-		}
-
-		mt_status.mt_type = MT_ISONSTREAM_SC;
-		mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT;
-		mt_status.mt_dsreg =
-			((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
-			((STp->density    << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
-		mt_status.mt_blkno = STps->drv_block;
-		mt_status.mt_fileno = STps->drv_file;
-		if (STp->block_size != 0) {
-			if (STps->rw == ST_WRITING)
-				mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size;
-			else if (STps->rw == ST_READING)
-				mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes +
-							STp->block_size - 1) / STp->block_size;
-		}
-
-		mt_status.mt_gstat = 0;
-		if (STp->drv_write_prot)
-			mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
-		if (mt_status.mt_blkno == 0) {
-			if (mt_status.mt_fileno == 0)
-				mt_status.mt_gstat |= GMT_BOT(0xffffffff);
-			else
-				mt_status.mt_gstat |= GMT_EOF(0xffffffff);
-		}
-		mt_status.mt_resid = STp->partition;
-		if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
-			mt_status.mt_gstat |= GMT_EOT(0xffffffff);
-		else if (STps->eof >= ST_EOM_OK)
-			mt_status.mt_gstat |= GMT_EOD(0xffffffff);
-		if (STp->density == 1)
-			mt_status.mt_gstat |= GMT_D_800(0xffffffff);
-		else if (STp->density == 2)
-			mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
-		else if (STp->density == 3)
-			mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
-		if (STp->ready == ST_READY)
-			mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
-		if (STp->ready == ST_NO_TAPE)
-			mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
-		if (STps->at_sm)
-			mt_status.mt_gstat |= GMT_SM(0xffffffff);
-		if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) ||
-		    STp->drv_buffer != 0)
-			mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
-
-		i = copy_to_user(p, &mt_status, sizeof(struct mtget));
-		if (i) {
-			retval = (-EFAULT);
-			goto out;
-		}
-
-		STp->recover_erreg = 0;  /* Clear after read */
-		retval = 0;
-		goto out;
-	} /* End of MTIOCGET */
-
-	if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
-		struct mtpos mt_pos;
-
-		if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
-			retval = (-EINVAL);
-			goto out;
-		}
-		if (STp->raw)
-			blk = osst_get_frame_position(STp, &SRpnt);
-		else
-			blk = osst_get_sector(STp, &SRpnt);
-		if (blk < 0) {
-			retval = blk;
-			goto out;
-		}
-		mt_pos.mt_blkno = blk;
-		i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
-		if (i)
-			retval = -EFAULT;
-		goto out;
-	}
-	if (SRpnt) osst_release_request(SRpnt);
-
-	mutex_unlock(&STp->lock);
-
-	retval = scsi_ioctl(STp->device, cmd_in, p);
-	mutex_unlock(&osst_int_mutex);
-	return retval;
-
-out:
-	if (SRpnt) osst_release_request(SRpnt);
-
-	mutex_unlock(&STp->lock);
-	mutex_unlock(&osst_int_mutex);
-
-	return retval;
-}
-
-#ifdef CONFIG_COMPAT
-static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg)
-{
-	struct osst_tape *STp = file->private_data;
-	struct scsi_device *sdev = STp->device;
-	int ret = -ENOIOCTLCMD;
-	if (sdev->host->hostt->compat_ioctl) {
-
-		ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg);
-
-	}
-	return ret;
-}
-#endif
-
-
-
-/* Memory handling routines */
-
-/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */
-static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg )
-{
-	int i;
-	gfp_t priority;
-	struct osst_buffer *tb;
-
-	if (from_initialization)
-		priority = GFP_ATOMIC;
-	else
-		priority = GFP_KERNEL;
-
-	i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist);
-	tb = kzalloc(i, priority);
-	if (!tb) {
-		printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n");
-		return NULL;
-	}
-
-	tb->sg_segs = tb->orig_sg_segs = 0;
-	tb->use_sg = max_sg;
-	tb->in_use = 1;
-	tb->dma = need_dma;
-	tb->buffer_size = 0;
-#if DEBUG
-	if (debugging) 
-		printk(OSST_DEB_MSG
-			"osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n",
-			   i, max_sg, need_dma);
-#endif
-	return tb;
-}
-
-/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */
-static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma)
-{
-	int segs, nbr, max_segs, b_size, order, got;
-	gfp_t priority;
-
-	if (STbuffer->buffer_size >= OS_FRAME_SIZE)
-		return 1;
-
-	if (STbuffer->sg_segs) {
-		printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n");
-		normalize_buffer(STbuffer);
-	}
-	/* See how many segments we can use -- need at least two */
-	nbr = max_segs = STbuffer->use_sg;
-	if (nbr <= 2)
-		return 0;
-
-	priority = GFP_KERNEL /* | __GFP_NOWARN */;
-	if (need_dma)
-		priority |= GFP_DMA;
-
-	/* Try to allocate the first segment up to OS_DATA_SIZE and the others
-	   big enough to reach the goal (code assumes no segments in place) */
-	for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) {
-		struct page *page = alloc_pages(priority, order);
-
-		STbuffer->sg[0].offset = 0;
-		if (page != NULL) {
-		    sg_set_page(&STbuffer->sg[0], page, b_size, 0);
-		    STbuffer->b_data = page_address(page);
-		    break;
-		}
-	}
-	if (sg_page(&STbuffer->sg[0]) == NULL) {
-		printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n");
-		return 0;
-	}
-	/* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */
-	for (segs=STbuffer->sg_segs=1, got=b_size;
-	     segs < max_segs && got < OS_FRAME_SIZE; ) {
-		struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order);
-		STbuffer->sg[segs].offset = 0;
-		if (page == NULL) {
-			printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n",
-						OS_FRAME_SIZE);
-#if DEBUG
-			STbuffer->buffer_size = got;
-#endif
-			normalize_buffer(STbuffer);
-			return 0;
-		}
-		sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0);
-		got += STbuffer->sg[segs].length;
-		STbuffer->buffer_size = got;
-		STbuffer->sg_segs = ++segs;
-	}
-#if DEBUG
-	if (debugging) {
-		printk(OSST_DEB_MSG
-			   "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n",
-			   got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data);
-		printk(OSST_DEB_MSG
-			   "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n",
-			   STbuffer->sg[0].length, page_address(STbuffer->sg[0].page),
-			   STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page));
-	}
-#endif
-
-	return 1;
-}
-
-
-/* Release the segments */
-static void normalize_buffer(struct osst_buffer *STbuffer)
-{
-  int i, order, b_size;
-
-	for (i=0; i < STbuffer->sg_segs; i++) {
-
-		for (b_size = PAGE_SIZE, order = 0;
-		     b_size < STbuffer->sg[i].length;
-		     b_size *= 2, order++);
-
-		__free_pages(sg_page(&STbuffer->sg[i]), order);
-		STbuffer->buffer_size -= STbuffer->sg[i].length;
-	}
-#if DEBUG
-	if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs)
-		printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n",
-			     STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs);
-#endif
-	STbuffer->sg_segs = STbuffer->orig_sg_segs = 0;
-}
-
-
-/* Move data from the user buffer to the tape buffer. Returns zero (success) or
-   negative error code. */
-static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count)
-{
-	int i, cnt, res, offset;
-
-	for (i=0, offset=st_bp->buffer_bytes;
-	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
-		offset -= st_bp->sg[i].length;
-	if (i == st_bp->sg_segs) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n");
-		return (-EIO);
-	}
-	for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
-		cnt = st_bp->sg[i].length - offset < do_count ?
-		      st_bp->sg[i].length - offset : do_count;
-		res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt);
-		if (res)
-			return (-EFAULT);
-		do_count -= cnt;
-		st_bp->buffer_bytes += cnt;
-		ubp += cnt;
-		offset = 0;
-	}
-	if (do_count) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n",
-		       do_count);
-		return (-EIO);
-	}
-	return 0;
-}
-
-
-/* Move data from the tape buffer to the user buffer. Returns zero (success) or
-   negative error code. */
-static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count)
-{
-	int i, cnt, res, offset;
-
-	for (i=0, offset=st_bp->read_pointer;
-	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
-		offset -= st_bp->sg[i].length;
-	if (i == st_bp->sg_segs) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n");
-		return (-EIO);
-	}
-	for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
-		cnt = st_bp->sg[i].length - offset < do_count ?
-		      st_bp->sg[i].length - offset : do_count;
-		res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt);
-		if (res)
-			return (-EFAULT);
-		do_count -= cnt;
-		st_bp->buffer_bytes -= cnt;
-		st_bp->read_pointer += cnt;
-		ubp += cnt;
-		offset = 0;
-	}
-	if (do_count) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count);
-		return (-EIO);
-	}
-	return 0;
-}
-
-/* Sets the tail of the buffer after fill point to zero.
-   Returns zero (success) or negative error code.        */
-static int osst_zero_buffer_tail(struct osst_buffer *st_bp)
-{
-	int	i, offset, do_count, cnt;
-
-	for (i = 0, offset = st_bp->buffer_bytes;
-	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
-		offset -= st_bp->sg[i].length;
-	if (i == st_bp->sg_segs) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n");
-		return (-EIO);
-	}
-	for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes;
-	     i < st_bp->sg_segs && do_count > 0; i++) {
-		cnt = st_bp->sg[i].length - offset < do_count ?
-		      st_bp->sg[i].length - offset : do_count ;
-		memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt);
-		do_count -= cnt;
-		offset = 0;
-	}
-	if (do_count) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count);
-		return (-EIO);
-	}
-	return 0;
-}
-
-/* Copy a osst 32K chunk of memory into the buffer.
-   Returns zero (success) or negative error code.  */
-static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
-{
-	int	i, cnt, do_count = OS_DATA_SIZE;
-
-	for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
-		cnt = st_bp->sg[i].length < do_count ?
-		      st_bp->sg[i].length : do_count ;
-		memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt);
-		do_count -= cnt;
-		ptr      += cnt;
-	}
-	if (do_count || i != st_bp->sg_segs-1) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n",
-					 do_count, i);
-		return (-EIO);
-	}
-	return 0;
-}
-
-/* Copy a osst 32K chunk of memory from the buffer.
-   Returns zero (success) or negative error code.  */
-static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
-{
-	int	i, cnt, do_count = OS_DATA_SIZE;
-
-	for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
-		cnt = st_bp->sg[i].length < do_count ?
-		      st_bp->sg[i].length : do_count ;
-		memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt);
-		do_count -= cnt;
-		ptr      += cnt;
-	}
-	if (do_count || i != st_bp->sg_segs-1) {  /* Should never happen */
-		printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n",
-					 do_count, i);
-		return (-EIO);
-	}
-	return 0;
-}
-
-
-/* Module housekeeping */
-
-static void validate_options (void)
-{
-  if (max_dev > 0)
-		osst_max_dev = max_dev;  
-  if (write_threshold_kbs > 0)
-		osst_write_threshold = write_threshold_kbs * ST_KILOBYTE;
-  if (osst_write_threshold > osst_buffer_size)
-		osst_write_threshold = osst_buffer_size;
-  if (max_sg_segs >= OSST_FIRST_SG)
-		osst_max_sg_segs = max_sg_segs;
-#if DEBUG
-  printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n",
-			   osst_max_dev, osst_write_threshold, osst_max_sg_segs);
-#endif
-}
-	
-#ifndef MODULE
-/* Set the boot options. Syntax: osst=xxx,yyy,...
-   where xxx is write threshold in 1024 byte blocks,
-   and   yyy is number of s/g segments to use. */
-static int __init osst_setup (char *str)
-{
-  int i, ints[5];
-  char *stp;
-
-  stp = get_options(str, ARRAY_SIZE(ints), ints);
-
-  if (ints[0] > 0) {
-	for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
-		  *parms[i].val = ints[i + 1];
-  } else {
-	while (stp != NULL) {
-		for (i = 0; i < ARRAY_SIZE(parms); i++) {
-			int len = strlen(parms[i].name);
-			if (!strncmp(stp, parms[i].name, len) &&
-			    (*(stp + len) == ':' || *(stp + len) == '=')) {
-				*parms[i].val =
-					simple_strtoul(stp + len + 1, NULL, 0);
-				break;
-			}
-		}
-		if (i >= ARRAY_SIZE(parms))
-			printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n",
-			       stp);
-		stp = strchr(stp, ',');
-		if (stp)
-			stp++;
-	}
-  }
-
-  return 1;
-}
-
-__setup("osst=", osst_setup);
-
-#endif
-
-static const struct file_operations osst_fops = {
-	.owner =        THIS_MODULE,
-	.read =         osst_read,
-	.write =        osst_write,
-	.unlocked_ioctl = osst_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl = osst_compat_ioctl,
-#endif
-	.open =         os_scsi_tape_open,
-	.flush =        os_scsi_tape_flush,
-	.release =      os_scsi_tape_close,
-	.llseek =	noop_llseek,
-};
-
-static int osst_supports(struct scsi_device * SDp)
-{
-	struct	osst_support_data {
-		char *vendor;
-		char *model;
-		char *rev;
-		char *driver_hint; /* Name of the correct driver, NULL if unknown */
-	};
-
-static	struct	osst_support_data support_list[] = {
-		/* {"XXX", "Yy-", "", NULL},  example */
-		SIGS_FROM_OSST,
-		{NULL, }};
-
-	struct	osst_support_data *rp;
-
-	/* We are willing to drive OnStream SC-x0 as well as the
-	 * 	 * IDE, ParPort, FireWire, USB variants, if accessible by
-	 * 	 	 * emulation layer (ide-scsi, usb-storage, ...) */
-
-	for (rp=&(support_list[0]); rp->vendor != NULL; rp++)
-		if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
-		    !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
-		    !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) 
-			return 1;
-	return 0;
-}
-
-/*
- * sysfs support for osst driver parameter information
- */
-
-static ssize_t version_show(struct device_driver *ddd, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n", osst_version);
-}
-
-static DRIVER_ATTR_RO(version);
-
-static int osst_create_sysfs_files(struct device_driver *sysfs)
-{
-	return driver_create_file(sysfs, &driver_attr_version);
-}
-
-static void osst_remove_sysfs_files(struct device_driver *sysfs)
-{
-	driver_remove_file(sysfs, &driver_attr_version);
-}
-
-/*
- * sysfs support for accessing ADR header information
- */
-
-static ssize_t osst_adr_rev_show(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev);
-	return l;
-}
-
-DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL);
-
-static ssize_t osst_linux_media_version_show(struct device *dev,
-					     struct device_attribute *attr,
-					     char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version);
-	return l;
-}
-
-DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL);
-
-static ssize_t osst_capacity_show(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity);
-	return l;
-}
-
-DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL);
-
-static ssize_t osst_first_data_ppos_show(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos);
-	return l;
-}
-
-DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL);
-
-static ssize_t osst_eod_frame_ppos_show(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos);
-	return l;
-}
-
-DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL);
-
-static ssize_t osst_filemark_cnt_show(struct device *dev,
-				      struct device_attribute *attr, char *buf)
-{
-	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
-	ssize_t l = 0;
-
-	if (STp && STp->header_ok && STp->linux_media)
-		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt);
-	return l;
-}
-
-DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL);
-
-static struct class *osst_sysfs_class;
-
-static int osst_sysfs_init(void)
-{
-	osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape");
-	if (IS_ERR(osst_sysfs_class)) {
-		printk(KERN_ERR "osst :W: Unable to register sysfs class\n");
-		return PTR_ERR(osst_sysfs_class);
-	}
-
-	return 0;
-}
-
-static void osst_sysfs_destroy(dev_t dev)
-{
-	device_destroy(osst_sysfs_class, dev);
-}
-
-static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name)
-{
-	struct device *osst_member;
-	int err;
-
-	osst_member = device_create(osst_sysfs_class, device, dev, STp,
-				    "%s", name);
-	if (IS_ERR(osst_member)) {
-		printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
-		return PTR_ERR(osst_member);
-	}
-
-	err = device_create_file(osst_member, &dev_attr_ADR_rev);
-	if (err)
-		goto err_out;
-	err = device_create_file(osst_member, &dev_attr_media_version);
-	if (err)
-		goto err_out;
-	err = device_create_file(osst_member, &dev_attr_capacity);
-	if (err)
-		goto err_out;
-	err = device_create_file(osst_member, &dev_attr_BOT_frame);
-	if (err)
-		goto err_out;
-	err = device_create_file(osst_member, &dev_attr_EOD_frame);
-	if (err)
-		goto err_out;
-	err = device_create_file(osst_member, &dev_attr_file_count);
-	if (err)
-		goto err_out;
-
-	return 0;
-
-err_out:
-	osst_sysfs_destroy(dev);
-	return err;
-}
-
-static void osst_sysfs_cleanup(void)
-{
-	class_destroy(osst_sysfs_class);
-}
-
-/*
- * osst startup / cleanup code
- */
-
-static int osst_probe(struct device *dev)
-{
-	struct scsi_device * SDp = to_scsi_device(dev);
-	struct osst_tape   * tpnt;
-	struct st_modedef  * STm;
-	struct st_partstat * STps;
-	struct osst_buffer * buffer;
-	struct gendisk	   * drive;
-	int		     i, dev_num, err = -ENODEV;
-
-	if (SDp->type != TYPE_TAPE || !osst_supports(SDp))
-		return -ENODEV;
-
-	drive = alloc_disk(1);
-	if (!drive) {
-		printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n");
-		return -ENODEV;
-	}
-
-	/* if this is the first attach, build the infrastructure */
-	write_lock(&os_scsi_tapes_lock);
-	if (os_scsi_tapes == NULL) {
-		os_scsi_tapes = kmalloc_array(osst_max_dev,
-                                              sizeof(struct osst_tape *),
-                                              GFP_ATOMIC);
-		if (os_scsi_tapes == NULL) {
-			write_unlock(&os_scsi_tapes_lock);
-			printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n");
-			goto out_put_disk;
-		}
-		for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL;
-	}
-	
-	if (osst_nr_dev >= osst_max_dev) {
-		write_unlock(&os_scsi_tapes_lock);
-		printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev);
-		goto out_put_disk;
-	}
-
-	/* find a free minor number */
-	for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++)
-		;
-	if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)");
-	dev_num = i;
-
-	/* allocate a struct osst_tape for this device */
-	tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC);
-	if (!tpnt) {
-		write_unlock(&os_scsi_tapes_lock);
-		printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
-		goto out_put_disk;
-	}
-
-	/* allocate a buffer for this device */
-	i = SDp->host->sg_tablesize;
-	if (osst_max_sg_segs < i)
-		i = osst_max_sg_segs;
-	buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i);
-	if (buffer == NULL) {
-		write_unlock(&os_scsi_tapes_lock);
-		printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n");
-		kfree(tpnt);
-		goto out_put_disk;
-	}
-	os_scsi_tapes[dev_num] = tpnt;
-	tpnt->buffer = buffer;
-	tpnt->device = SDp;
-	drive->private_data = &tpnt->driver;
-	sprintf(drive->disk_name, "osst%d", dev_num);
-	tpnt->driver = &osst_template;
-	tpnt->drive = drive;
-	tpnt->in_use = 0;
-	tpnt->capacity = 0xfffff;
-	tpnt->dirty = 0;
-	tpnt->drv_buffer = 1;  /* Try buffering if no mode sense */
-	tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
-	tpnt->density = 0;
-	tpnt->do_auto_lock = OSST_AUTO_LOCK;
-	tpnt->can_bsr = OSST_IN_FILE_POS;
-	tpnt->can_partitions = 0;
-	tpnt->two_fm = OSST_TWO_FM;
-	tpnt->fast_mteom = OSST_FAST_MTEOM;
-	tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */
-	tpnt->write_threshold = osst_write_threshold;
-	tpnt->default_drvbuffer = 0xff; /* No forced buffering */
-	tpnt->partition = 0;
-	tpnt->new_partition = 0;
-	tpnt->nbr_partitions = 0;
-	tpnt->min_block = 512;
-	tpnt->max_block = OS_DATA_SIZE;
-	tpnt->timeout = OSST_TIMEOUT;
-	tpnt->long_timeout = OSST_LONG_TIMEOUT;
-
-	/* Recognize OnStream tapes */
-	/* We don't need to test for OnStream, as this has been done in detect () */
-	tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev);
-	tpnt->omit_blklims = 1;
-
-	tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) || 
-		     (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp);
-	tpnt->frame_in_buffer = 0;
-	tpnt->header_ok = 0;
-	tpnt->linux_media = 0;
-	tpnt->header_cache = NULL;
-
-	for (i=0; i < ST_NBR_MODES; i++) {
-		STm = &(tpnt->modes[i]);
-		STm->defined = 0;
-		STm->sysv = OSST_SYSV;
-		STm->defaults_for_writes = 0;
-		STm->do_async_writes = OSST_ASYNC_WRITES;
-		STm->do_buffer_writes = OSST_BUFFER_WRITES;
-		STm->do_read_ahead = OSST_READ_AHEAD;
-		STm->default_compression = ST_DONT_TOUCH;
-		STm->default_blksize = 512;
-		STm->default_density = (-1);  /* No forced density */
-	}
-
-	for (i=0; i < ST_NBR_PARTITIONS; i++) {
-		STps = &(tpnt->ps[i]);
-		STps->rw = ST_IDLE;
-		STps->eof = ST_NOEOF;
-		STps->at_sm = 0;
-		STps->last_block_valid = 0;
-		STps->drv_block = (-1);
-		STps->drv_file = (-1);
-	}
-
-	tpnt->current_mode = 0;
-	tpnt->modes[0].defined = 1;
-	tpnt->modes[2].defined = 1;
-	tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0;
-
-	mutex_init(&tpnt->lock);
-	osst_nr_dev++;
-	write_unlock(&os_scsi_tapes_lock);
-
-	{
-		char name[8];
-
-		/*  Rewind entry  */
-		err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt));
-		if (err)
-			goto out_free_buffer;
-
-		/*  No-rewind entry  */
-		snprintf(name, 8, "%s%s", "n", tape_name(tpnt));
-		err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name);
-		if (err)
-			goto out_free_sysfs1;
-	}
-
-	sdev_printk(KERN_INFO, SDp,
-		"osst :I: Attached OnStream %.5s tape as %s\n",
-		SDp->model, tape_name(tpnt));
-
-	return 0;
-
-out_free_sysfs1:
-	osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num));
-out_free_buffer:
-	kfree(buffer);
-out_put_disk:
-        put_disk(drive);
-        return err;
-};
-
-static int osst_remove(struct device *dev)
-{
-	struct scsi_device * SDp = to_scsi_device(dev);
-	struct osst_tape * tpnt;
-	int i;
-
-	if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0))
-		return 0;
-
-	write_lock(&os_scsi_tapes_lock);
-	for(i=0; i < osst_max_dev; i++) {
-		if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) {
-			osst_sysfs_destroy(MKDEV(OSST_MAJOR, i));
-			osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128));
-			tpnt->device = NULL;
-			put_disk(tpnt->drive);
-			os_scsi_tapes[i] = NULL;
-			osst_nr_dev--;
-			write_unlock(&os_scsi_tapes_lock);
-			vfree(tpnt->header_cache);
-			if (tpnt->buffer) {
-				normalize_buffer(tpnt->buffer);
-				kfree(tpnt->buffer);
-			}
-			kfree(tpnt);
-			return 0;
-		}
-	}
-	write_unlock(&os_scsi_tapes_lock);
-	return 0;
-}
-
-static int __init init_osst(void) 
-{
-	int err;
-
-	printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid);
-
-	validate_options();
-
-	err = osst_sysfs_init();
-	if (err)
-		return err;
-
-	err = register_chrdev(OSST_MAJOR, "osst", &osst_fops);
-	if (err < 0) {
-		printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR);
-		goto err_out;
-	}
-
-	err = scsi_register_driver(&osst_template.gendrv);
-	if (err)
-		goto err_out_chrdev;
-
-	err = osst_create_sysfs_files(&osst_template.gendrv);
-	if (err)
-		goto err_out_scsidrv;
-
-	return 0;
-
-err_out_scsidrv:
-	scsi_unregister_driver(&osst_template.gendrv);
-err_out_chrdev:
-	unregister_chrdev(OSST_MAJOR, "osst");
-err_out:
-	osst_sysfs_cleanup();
-	return err;
-}
-
-static void __exit exit_osst (void)
-{
-	int i;
-	struct osst_tape * STp;
-
-	osst_remove_sysfs_files(&osst_template.gendrv);
-	scsi_unregister_driver(&osst_template.gendrv);
-	unregister_chrdev(OSST_MAJOR, "osst");
-	osst_sysfs_cleanup();
-
-	if (os_scsi_tapes) {
-		for (i=0; i < osst_max_dev; ++i) {
-			if (!(STp = os_scsi_tapes[i])) continue;
-			/* This is defensive, supposed to happen during detach */
-			vfree(STp->header_cache);
-			if (STp->buffer) {
-				normalize_buffer(STp->buffer);
-				kfree(STp->buffer);
-			}
-			put_disk(STp->drive);
-			kfree(STp);
-		}
-		kfree(os_scsi_tapes);
-	}
-	printk(KERN_INFO "osst :I: Unloaded.\n");
-}
-
-module_init(init_osst);
-module_exit(exit_osst);
diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h
deleted file mode 100644
index b90ae280853d..000000000000
--- a/drivers/scsi/osst.h
+++ /dev/null
@@ -1,651 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *	$Header: /cvsroot/osst/Driver/osst.h,v 1.16 2005/01/01 21:13:35 wriede Exp $
- */
-
-#include <asm/byteorder.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-
-/*	FIXME - rename and use the following two types or delete them!
- *              and the types really should go to st.h anyway...
- *	INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C)
- */
-typedef struct {
-	unsigned	device_type	:5;	/* Peripheral Device Type */
-	unsigned	reserved0_765	:3;	/* Peripheral Qualifier - Reserved */
-	unsigned	reserved1_6t0	:7;	/* Reserved */
-	unsigned	rmb		:1;	/* Removable Medium Bit */
-	unsigned	ansi_version	:3;	/* ANSI Version */
-	unsigned	ecma_version	:3;	/* ECMA Version */
-	unsigned	iso_version	:2;	/* ISO Version */
-	unsigned	response_format :4;	/* Response Data Format */
-	unsigned	reserved3_45	:2;	/* Reserved */
-	unsigned	reserved3_6	:1;	/* TrmIOP - Reserved */
-	unsigned	reserved3_7	:1;	/* AENC - Reserved */
-	u8		additional_length;	/* Additional Length (total_length-4) */
-	u8		rsv5, rsv6, rsv7;	/* Reserved */
-	u8		vendor_id[8];		/* Vendor Identification */
-	u8		product_id[16];		/* Product Identification */
-	u8		revision_level[4];	/* Revision Level */
-	u8		vendor_specific[20];	/* Vendor Specific - Optional */
-	u8		reserved56t95[40];	/* Reserved - Optional */
-						/* Additional information may be returned */
-} idetape_inquiry_result_t;
-
-/*
- *	READ POSITION packet command - Data Format (From Table 6-57)
- */
-typedef struct {
-	unsigned	reserved0_10	:2;	/* Reserved */
-	unsigned	bpu		:1;	/* Block Position Unknown */	
-	unsigned	reserved0_543	:3;	/* Reserved */
-	unsigned	eop		:1;	/* End Of Partition */
-	unsigned	bop		:1;	/* Beginning Of Partition */
-	u8		partition;		/* Partition Number */
-	u8		reserved2, reserved3;	/* Reserved */
-	u32		first_block;		/* First Block Location */
-	u32		last_block;		/* Last Block Location (Optional) */
-	u8		reserved12;		/* Reserved */
-	u8		blocks_in_buffer[3];	/* Blocks In Buffer - (Optional) */
-	u32		bytes_in_buffer;	/* Bytes In Buffer (Optional) */
-} idetape_read_position_result_t;
-
-/*
- *      Follows structures which are related to the SELECT SENSE / MODE SENSE
- *      packet commands. 
- */
-#define COMPRESSION_PAGE           0x0f
-#define COMPRESSION_PAGE_LENGTH    16
-
-#define CAPABILITIES_PAGE          0x2a
-#define CAPABILITIES_PAGE_LENGTH   20
-
-#define TAPE_PARAMTR_PAGE          0x2b
-#define TAPE_PARAMTR_PAGE_LENGTH   16
-
-#define NUMBER_RETRIES_PAGE        0x2f
-#define NUMBER_RETRIES_PAGE_LENGTH 4
-
-#define BLOCK_SIZE_PAGE            0x30
-#define BLOCK_SIZE_PAGE_LENGTH     4
-
-#define BUFFER_FILLING_PAGE        0x33
-#define BUFFER_FILLING_PAGE_LENGTH 4
-
-#define VENDOR_IDENT_PAGE          0x36
-#define VENDOR_IDENT_PAGE_LENGTH   8
-
-#define LOCATE_STATUS_PAGE         0x37
-#define LOCATE_STATUS_PAGE_LENGTH  0
-
-#define MODE_HEADER_LENGTH         4
-
-
-/*
- *	REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
-	unsigned	error_code	:7;	/* Current of deferred errors */
-	unsigned	valid		:1;	/* The information field conforms to QIC-157C */
-	u8		reserved1	:8;	/* Segment Number - Reserved */
-	unsigned	sense_key	:4;	/* Sense Key */
-	unsigned	reserved2_4	:1;	/* Reserved */
-	unsigned	ili		:1;	/* Incorrect Length Indicator */
-	unsigned	eom		:1;	/* End Of Medium */
-	unsigned	filemark 	:1;	/* Filemark */
-	u32		information __attribute__ ((packed));
-	u8		asl;			/* Additional sense length (n-7) */
-	u32		command_specific;	/* Additional command specific information */
-	u8		asc;			/* Additional Sense Code */
-	u8		ascq;			/* Additional Sense Code Qualifier */
-	u8		replaceable_unit_code;	/* Field Replaceable Unit Code */
-	unsigned	sk_specific1 	:7;	/* Sense Key Specific */
-	unsigned	sksv		:1;	/* Sense Key Specific information is valid */
-	u8		sk_specific2;		/* Sense Key Specific */
-	u8		sk_specific3;		/* Sense Key Specific */
-	u8		pad[2];			/* Padding to 20 bytes */
-} idetape_request_sense_result_t;
-
-/*
- *      Mode Parameter Header for the MODE SENSE packet command
- */
-typedef struct {
-        u8              mode_data_length;       /* Length of the following data transfer */
-        u8              medium_type;            /* Medium Type */
-        u8              dsp;                    /* Device Specific Parameter */
-        u8              bdl;                    /* Block Descriptor Length */
-} osst_mode_parameter_header_t;
-
-/*
- *      Mode Parameter Block Descriptor the MODE SENSE packet command
- *
- *      Support for block descriptors is optional.
- */
-typedef struct {
-        u8              density_code;           /* Medium density code */
-        u8              blocks[3];              /* Number of blocks */
-        u8              reserved4;              /* Reserved */
-        u8              length[3];              /* Block Length */
-} osst_parameter_block_descriptor_t;
-
-/*
- *      The Data Compression Page, as returned by the MODE SENSE packet command.
- */
-typedef struct {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        ps              :1;
-        unsigned        reserved0       :1;     /* Reserved */
-	unsigned        page_code       :6;     /* Page Code - Should be 0xf */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        page_code       :6;     /* Page Code - Should be 0xf */
-        unsigned        reserved0       :1;     /* Reserved */
-        unsigned        ps              :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u8              page_length;            /* Page Length - Should be 14 */
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        dce             :1;     /* Data Compression Enable */
-        unsigned        dcc             :1;     /* Data Compression Capable */
-	unsigned        reserved2       :6;     /* Reserved */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        reserved2       :6;     /* Reserved */
-        unsigned        dcc             :1;     /* Data Compression Capable */
-        unsigned        dce             :1;     /* Data Compression Enable */
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        dde             :1;     /* Data Decompression Enable */
-        unsigned        red             :2;     /* Report Exception on Decompression */
-	unsigned        reserved3       :5;     /* Reserved */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        reserved3       :5;     /* Reserved */
-        unsigned        red             :2;     /* Report Exception on Decompression */
-        unsigned        dde             :1;     /* Data Decompression Enable */
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u32             ca;                     /* Compression Algorithm */
-        u32             da;                     /* Decompression Algorithm */
-        u8              reserved[4];            /* Reserved */
-} osst_data_compression_page_t;
-
-/*
- *      The Medium Partition Page, as returned by the MODE SENSE packet command.
- */
-typedef struct {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        ps              :1;
-        unsigned        reserved1_6     :1;     /* Reserved */
-	unsigned        page_code       :6;     /* Page Code - Should be 0x11 */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        page_code       :6;     /* Page Code - Should be 0x11 */
-        unsigned        reserved1_6     :1;     /* Reserved */
-        unsigned        ps              :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u8              page_length;            /* Page Length - Should be 6 */
-        u8              map;                    /* Maximum Additional Partitions - Should be 0 */
-        u8              apd;                    /* Additional Partitions Defined - Should be 0 */
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        fdp             :1;     /* Fixed Data Partitions */
-        unsigned        sdp             :1;     /* Should be 0 */
-        unsigned        idp             :1;     /* Should be 0 */
-        unsigned        psum            :2;     /* Should be 0 */
-	unsigned        reserved4_012   :3;     /* Reserved */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        reserved4_012   :3;     /* Reserved */
-        unsigned        psum            :2;     /* Should be 0 */
-        unsigned        idp             :1;     /* Should be 0 */
-        unsigned        sdp             :1;     /* Should be 0 */
-        unsigned        fdp             :1;     /* Fixed Data Partitions */
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u8              mfr;                    /* Medium Format Recognition */
-        u8              reserved[2];            /* Reserved */
-} osst_medium_partition_page_t;
-
-/*
- *      Capabilities and Mechanical Status Page
- */
-typedef struct {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        reserved1_67    :2;
-	unsigned        page_code       :6;     /* Page code - Should be 0x2a */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        page_code       :6;     /* Page code - Should be 0x2a */
-        unsigned        reserved1_67    :2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u8              page_length;            /* Page Length - Should be 0x12 */
-        u8              reserved2, reserved3;
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        reserved4_67    :2;
-        unsigned        sprev           :1;     /* Supports SPACE in the reverse direction */
-        unsigned        reserved4_1234  :4;
-	unsigned        ro              :1;     /* Read Only Mode */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        ro              :1;     /* Read Only Mode */
-        unsigned        reserved4_1234  :4;
-        unsigned        sprev           :1;     /* Supports SPACE in the reverse direction */
-        unsigned        reserved4_67    :2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        reserved5_67    :2;
-        unsigned        qfa             :1;     /* Supports the QFA two partition formats */
-        unsigned        reserved5_4     :1;
-        unsigned        efmt            :1;     /* Supports ERASE command initiated formatting */
-	unsigned        reserved5_012   :3;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        reserved5_012   :3;
-        unsigned        efmt            :1;     /* Supports ERASE command initiated formatting */
-        unsigned        reserved5_4     :1;
-        unsigned        qfa             :1;     /* Supports the QFA two partition formats */
-        unsigned        reserved5_67    :2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        cmprs           :1;     /* Supports data compression */
-        unsigned        ecc             :1;     /* Supports error correction */
-	unsigned        reserved6_45    :2;     /* Reserved */  
-        unsigned        eject           :1;     /* The device can eject the volume */
-        unsigned        prevent         :1;     /* The device defaults in the prevent state after power up */
-        unsigned        locked          :1;     /* The volume is locked */
-	unsigned        lock            :1;     /* Supports locking the volume */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        lock            :1;     /* Supports locking the volume */
-        unsigned        locked          :1;     /* The volume is locked */
-        unsigned        prevent         :1;     /* The device defaults in the prevent state after power up */
-        unsigned        eject           :1;     /* The device can eject the volume */
-	unsigned        reserved6_45    :2;     /* Reserved */  
-        unsigned        ecc             :1;     /* Supports error correction */
-        unsigned        cmprs           :1;     /* Supports data compression */
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        blk32768        :1;     /* slowb - the device restricts the byte count for PIO */
-                                                /* transfers for slow buffer memory ??? */
-                                                /* Also 32768 block size in some cases */
-        unsigned        reserved7_3_6   :4;
-        unsigned        blk1024         :1;     /* Supports 1024 bytes block size */
-        unsigned        blk512          :1;     /* Supports 512 bytes block size */
-	unsigned        reserved7_0     :1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        reserved7_0     :1;
-        unsigned        blk512          :1;     /* Supports 512 bytes block size */
-        unsigned        blk1024         :1;     /* Supports 1024 bytes block size */
-        unsigned        reserved7_3_6   :4;
-        unsigned        blk32768        :1;     /* slowb - the device restricts the byte count for PIO */
-                                                /* transfers for slow buffer memory ??? */
-                                                /* Also 32768 block size in some cases */
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        __be16          max_speed;              /* Maximum speed supported in KBps */
-        u8              reserved10, reserved11;
-        __be16          ctl;                    /* Continuous Transfer Limit in blocks */
-        __be16          speed;                  /* Current Speed, in KBps */
-        __be16          buffer_size;            /* Buffer Size, in 512 bytes */
-        u8              reserved18, reserved19;
-} osst_capabilities_page_t;
-
-/*
- *      Block Size Page
- */
-typedef struct {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        ps              :1;
-        unsigned        reserved1_6     :1;
-	unsigned        page_code       :6;     /* Page code - Should be 0x30 */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        page_code       :6;     /* Page code - Should be 0x30 */
-        unsigned        reserved1_6     :1;
-        unsigned        ps              :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        u8              page_length;            /* Page Length - Should be 2 */
-        u8              reserved2;
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        one             :1;
-        unsigned        reserved2_6     :1;
-        unsigned        record32_5      :1;
-        unsigned        record32        :1;
-        unsigned        reserved2_23    :2;
-        unsigned        play32_5        :1;
-	unsigned        play32          :1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        play32          :1;
-        unsigned        play32_5        :1;
-        unsigned        reserved2_23    :2;
-        unsigned        record32        :1;
-        unsigned        record32_5      :1;
-        unsigned        reserved2_6     :1;
-        unsigned        one             :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-} osst_block_size_page_t;
-
-/*
- *	Tape Parameters Page
- */
-typedef struct {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-        unsigned        ps              :1;
-        unsigned        reserved1_6     :1;
-	unsigned        page_code       :6;     /* Page code - Should be 0x2b */
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	unsigned        page_code       :6;     /* Page code - Should be 0x2b */
-        unsigned        reserved1_6     :1;
-        unsigned        ps              :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	u8		reserved2;
-	u8		density;
-	u8		reserved3,reserved4;
-	__be16		segtrk;
-	__be16		trks;
-	u8		reserved5,reserved6,reserved7,reserved8,reserved9,reserved10;
-} osst_tape_paramtr_page_t;
-
-/* OnStream definitions */
-
-#define OS_CONFIG_PARTITION     (0xff)
-#define OS_DATA_PARTITION       (0)
-#define OS_PARTITION_VERSION    (1)
-
-/*
- * partition
- */
-typedef struct os_partition_s {
-        __u8    partition_num;
-        __u8    par_desc_ver;
-        __be16  wrt_pass_cntr;
-        __be32  first_frame_ppos;
-        __be32  last_frame_ppos;
-        __be32  eod_frame_ppos;
-} os_partition_t;
-
-/*
- * DAT entry
- */
-typedef struct os_dat_entry_s {
-        __be32  blk_sz;
-        __be16  blk_cnt;
-        __u8    flags;
-        __u8    reserved;
-} os_dat_entry_t;
-
-/*
- * DAT
- */
-#define OS_DAT_FLAGS_DATA       (0xc)
-#define OS_DAT_FLAGS_MARK       (0x1)
-
-typedef struct os_dat_s {
-        __u8            dat_sz;
-        __u8            reserved1;
-        __u8            entry_cnt;
-        __u8            reserved3;
-        os_dat_entry_t  dat_list[16];
-} os_dat_t;
-
-/*
- * Frame types
- */
-#define OS_FRAME_TYPE_FILL      (0)
-#define OS_FRAME_TYPE_EOD       (1 << 0)
-#define OS_FRAME_TYPE_MARKER    (1 << 1)
-#define OS_FRAME_TYPE_HEADER    (1 << 3)
-#define OS_FRAME_TYPE_DATA      (1 << 7)
-
-/*
- * AUX
- */
-typedef struct os_aux_s {
-        __be32          format_id;              /* hardware compatibility AUX is based on */
-        char            application_sig[4];     /* driver used to write this media */
-        __be32          hdwr;                   /* reserved */
-        __be32          update_frame_cntr;      /* for configuration frame */
-        __u8            frame_type;
-        __u8            frame_type_reserved;
-        __u8            reserved_18_19[2];
-        os_partition_t  partition;
-        __u8            reserved_36_43[8];
-        __be32          frame_seq_num;
-        __be32          logical_blk_num_high;
-        __be32          logical_blk_num;
-        os_dat_t        dat;
-        __u8            reserved188_191[4];
-        __be32          filemark_cnt;
-        __be32          phys_fm;
-        __be32          last_mark_ppos;
-        __u8            reserved204_223[20];
-
-        /*
-         * __u8         app_specific[32];
-         *
-         * Linux specific fields:
-         */
-         __be32         next_mark_ppos;         /* when known, points to next marker */
-	 __be32		last_mark_lbn;		/* storing log_blk_num of last mark is extends ADR spec */
-         __u8           linux_specific[24];
-
-        __u8            reserved_256_511[256];
-} os_aux_t;
-
-#define OS_FM_TAB_MAX 1024
-
-typedef struct os_fm_tab_s {
-	__u8		fm_part_num;
-	__u8		reserved_1;
-	__u8		fm_tab_ent_sz;
-	__u8		reserved_3;
-	__be16		fm_tab_ent_cnt;
-	__u8		reserved6_15[10];
-	__be32		fm_tab_ent[OS_FM_TAB_MAX];
-} os_fm_tab_t;
-
-typedef struct os_ext_trk_ey_s {
-	__u8		et_part_num;
-	__u8		fmt;
-	__be16		fm_tab_off;
-	__u8		reserved4_7[4];
-	__be32		last_hlb_hi;
-	__be32		last_hlb;
-	__be32		last_pp;
-	__u8		reserved20_31[12];
-} os_ext_trk_ey_t;
-
-typedef struct os_ext_trk_tb_s {
-	__u8		nr_stream_part;
-	__u8		reserved_1;
-	__u8		et_ent_sz;
-	__u8		reserved3_15[13];
-	os_ext_trk_ey_t	dat_ext_trk_ey;
-	os_ext_trk_ey_t	qfa_ext_trk_ey;
-} os_ext_trk_tb_t;
-
-typedef struct os_header_s {
-        char            ident_str[8];
-        __u8            major_rev;
-        __u8            minor_rev;
-	__be16		ext_trk_tb_off;
-        __u8            reserved12_15[4];
-        __u8            pt_par_num;
-        __u8            pt_reserved1_3[3];
-        os_partition_t  partition[16];
-	__be32		cfg_col_width;
-	__be32		dat_col_width;
-	__be32		qfa_col_width;
-	__u8		cartridge[16];
-	__u8		reserved304_511[208];
-	__be32		old_filemark_list[16680/4];		/* in ADR 1.4 __u8 track_table[16680] */
-	os_ext_trk_tb_t	ext_track_tb;
-	__u8		reserved17272_17735[464];
-	os_fm_tab_t	dat_fm_tab;
-	os_fm_tab_t	qfa_fm_tab;
-	__u8		reserved25960_32767[6808];
-} os_header_t;
-
-
-/*
- * OnStream ADRL frame
- */
-#define OS_FRAME_SIZE   (32 * 1024 + 512)
-#define OS_DATA_SIZE    (32 * 1024)
-#define OS_AUX_SIZE     (512)
-//#define OSST_MAX_SG      2
-
-/* The OnStream tape buffer descriptor. */
-struct osst_buffer {
-  unsigned char in_use;
-  unsigned char dma;	/* DMA-able buffer */
-  int buffer_size;
-  int buffer_blocks;
-  int buffer_bytes;
-  int read_pointer;
-  int writing;
-  int midlevel_result;
-  int syscall_result;
-  struct osst_request *last_SRpnt;
-  struct st_cmdstatus cmdstat;
-  struct rq_map_data map_data;
-  unsigned char *b_data;
-  os_aux_t *aux;               /* onstream AUX structure at end of each block     */
-  unsigned short use_sg;       /* zero or number of s/g segments for this adapter */
-  unsigned short sg_segs;      /* number of segments in s/g list                  */
-  unsigned short orig_sg_segs; /* number of segments allocated at first try       */
-  struct scatterlist sg[1];    /* MUST BE last item                               */
-} ;
-
-/* The OnStream tape drive descriptor */
-struct osst_tape {
-  struct scsi_driver *driver;
-  unsigned capacity;
-  struct scsi_device *device;
-  struct mutex lock;           /* for serialization */
-  struct completion wait;      /* for SCSI commands */
-  struct osst_buffer * buffer;
-
-  /* Drive characteristics */
-  unsigned char omit_blklims;
-  unsigned char do_auto_lock;
-  unsigned char can_bsr;
-  unsigned char can_partitions;
-  unsigned char two_fm;
-  unsigned char fast_mteom;
-  unsigned char restr_dma;
-  unsigned char scsi2_logical;
-  unsigned char default_drvbuffer;  /* 0xff = don't touch, value 3 bits */
-  unsigned char pos_unknown;        /* after reset position unknown */
-  int write_threshold;
-  int timeout;			/* timeout for normal commands */
-  int long_timeout;		/* timeout for commands known to take long time*/
-
-  /* Mode characteristics */
-  struct st_modedef modes[ST_NBR_MODES];
-  int current_mode;
-
-  /* Status variables */
-  int partition;
-  int new_partition;
-  int nbr_partitions;    /* zero until partition support enabled */
-  struct st_partstat ps[ST_NBR_PARTITIONS];
-  unsigned char dirty;
-  unsigned char ready;
-  unsigned char write_prot;
-  unsigned char drv_write_prot;
-  unsigned char in_use;
-  unsigned char blksize_changed;
-  unsigned char density_changed;
-  unsigned char compression_changed;
-  unsigned char drv_buffer;
-  unsigned char density;
-  unsigned char door_locked;
-  unsigned char rew_at_close;
-  unsigned char inited;
-  int block_size;
-  int min_block;
-  int max_block;
-  int recover_count;            /* from tape opening */
-  int abort_count;
-  int write_count;
-  int read_count;
-  int recover_erreg;            /* from last status call */
-  /*
-   * OnStream specific data
-   */
-  int	   os_fw_rev;			       /* the firmware revision * 10000 */
-  unsigned char  raw;                          /* flag OnStream raw access (32.5KB block size) */
-  unsigned char  poll;                         /* flag that this drive needs polling (IDE|firmware) */
-  unsigned char  frame_in_buffer;	       /* flag that the frame as per frame_seq_number
-						* has been read into STp->buffer and is valid */
-  int      frame_seq_number;                   /* logical frame number */
-  int      logical_blk_num;                    /* logical block number */
-  unsigned first_frame_position;               /* physical frame to be transferred to/from host */
-  unsigned last_frame_position;                /* physical frame to be transferd to/from tape */
-  int      cur_frames;                         /* current number of frames in internal buffer */
-  int      max_frames;                         /* max number of frames in internal buffer */
-  char     application_sig[5];                 /* application signature */
-  unsigned char  fast_open;                    /* flag that reminds us we didn't check headers at open */
-  unsigned short wrt_pass_cntr;                /* write pass counter */
-  int      update_frame_cntr;                  /* update frame counter */
-  int      onstream_write_error;               /* write error recovery active */
-  int      header_ok;                          /* header frame verified ok */
-  int      linux_media;                        /* reading linux-specifc media */
-  int      linux_media_version;
-  os_header_t * header_cache;		       /* cache is kept for filemark positions */
-  int      filemark_cnt;
-  int      first_mark_ppos;
-  int      last_mark_ppos;
-  int      last_mark_lbn;			/* storing log_blk_num of last mark is extends ADR spec */
-  int      first_data_ppos;
-  int      eod_frame_ppos;
-  int      eod_frame_lfa;
-  int      write_type;				/* used in write error recovery */
-  int      read_error_frame;			/* used in read error recovery */
-  unsigned long cmd_start_time;
-  unsigned long max_cmd_time;
-
-#if DEBUG
-  unsigned char write_pending;
-  int nbr_finished;
-  int nbr_waits;
-  unsigned char last_cmnd[6];
-  unsigned char last_sense[16];
-#endif
-  struct gendisk *drive;
-} ;
-
-/* scsi tape command */
-struct osst_request {
-	unsigned char cmd[MAX_COMMAND_SIZE];
-	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
-	int result;
-	struct osst_tape *stp;
-	struct completion *waiting;
-	struct bio *bio;
-};
-
-/* Values of write_type */
-#define OS_WRITE_DATA      0
-#define OS_WRITE_EOD       1
-#define OS_WRITE_NEW_MARK  2
-#define OS_WRITE_LAST_MARK 3
-#define OS_WRITE_HEADER    4
-#define OS_WRITE_FILLER    5
-
-/* Additional rw state */
-#define OS_WRITING_COMPLETE 3
diff --git a/drivers/scsi/osst_detect.h b/drivers/scsi/osst_detect.h
deleted file mode 100644
index 83c1d4fb11db..000000000000
--- a/drivers/scsi/osst_detect.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#define SIGS_FROM_OSST \
-       {"OnStream", "SC-", "", "osst"}, \
-       {"OnStream", "DI-", "", "osst"}, \
-       {"OnStream", "DP-", "", "osst"}, \
-       {"OnStream", "FW-", "", "osst"}, \
-       {"OnStream", "USB", "", "osst"}
diff --git a/drivers/scsi/osst_options.h b/drivers/scsi/osst_options.h
deleted file mode 100644
index a6a389b88876..000000000000
--- a/drivers/scsi/osst_options.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
-   The compile-time configurable defaults for the Linux SCSI tape driver.
-
-   Copyright 1995 Kai Makisara.
-   
-   Last modified: Wed Sep  2 21:24:07 1998 by root@home
-   
-   Changed (and renamed) for OnStream SCSI drives garloff@suse.de
-   2000-06-21
-
-   $Header: /cvsroot/osst/Driver/osst_options.h,v 1.6 2003/12/23 14:22:12 wriede Exp $
-*/
-
-#ifndef _OSST_OPTIONS_H
-#define _OSST_OPTIONS_H
-
-/* The minimum limit for the number of SCSI tape devices is determined by
-   OSST_MAX_TAPES. If the number of tape devices and the "slack" defined by
-   OSST_EXTRA_DEVS exceeds OSST_MAX_TAPES, the large number is used. */
-#define OSST_MAX_TAPES 4
-
-/* If OSST_IN_FILE_POS is nonzero, the driver positions the tape after the
-   record been read by the user program even if the tape has moved further
-   because of buffered reads. Should be set to zero to support also drives
-   that can't space backwards over records. NOTE: The tape will be
-   spaced backwards over an "accidentally" crossed filemark in any case. */
-#define OSST_IN_FILE_POS 1
-
-/* The tape driver buffer size in kilobytes. */
-/* Don't change, as this is the HW blocksize */
-#define OSST_BUFFER_BLOCKS 32
-
-/* The number of kilobytes of data in the buffer that triggers an
-   asynchronous write in fixed block mode. See also OSST_ASYNC_WRITES
-   below. */
-#define OSST_WRITE_THRESHOLD_BLOCKS 32
-
-/* OSST_EOM_RESERVE defines the number of frames are kept in reserve for
- *  * write error recovery when writing near end of medium. ENOSPC is returned
- *   * when write() is called and the tape write position is within this number
- *    * of blocks from the tape capacity. */
-#define OSST_EOM_RESERVE 300
-
-/* The maximum number of tape buffers the driver allocates. The number
-   is also constrained by the number of drives detected. Determines the
-   maximum number of concurrently active tape drives. */
-#define OSST_MAX_BUFFERS OSST_MAX_TAPES 
-
-/* Maximum number of scatter/gather segments */
-/* Fit one buffer in pages and add one for the AUX header */
-#define OSST_MAX_SG      (((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE) + 1)
-
-/* The number of scatter/gather segments to allocate at first try (must be
-   smaller or equal to the maximum). */
-#define OSST_FIRST_SG    ((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE)
-
-/* The size of the first scatter/gather segments (determines the maximum block
-   size for SCSI adapters not supporting scatter/gather). The default is set
-   to try to allocate the buffer as one chunk. */
-#define OSST_FIRST_ORDER  (15-PAGE_SHIFT)
-
-
-/* The following lines define defaults for properties that can be set
-   separately for each drive using the MTSTOPTIONS ioctl. */
-
-/* If OSST_TWO_FM is non-zero, the driver writes two filemarks after a
-   file being written. Some drives can't handle two filemarks at the
-   end of data. */
-#define OSST_TWO_FM 0
-
-/* If OSST_BUFFER_WRITES is non-zero, writes in fixed block mode are
-   buffered until the driver buffer is full or asynchronous write is
-   triggered. */
-#define OSST_BUFFER_WRITES 1
-
-/* If OSST_ASYNC_WRITES is non-zero, the SCSI write command may be started
-   without waiting for it to finish. May cause problems in multiple
-   tape backups. */
-#define OSST_ASYNC_WRITES 1
-
-/* If OSST_READ_AHEAD is non-zero, blocks are read ahead in fixed block
-   mode. */
-#define OSST_READ_AHEAD 1
-
-/* If OSST_AUTO_LOCK is non-zero, the drive door is locked at the first
-   read or write command after the device is opened. The door is opened
-   when the device is closed. */
-#define OSST_AUTO_LOCK 0
-
-/* If OSST_FAST_MTEOM is non-zero, the MTEOM ioctl is done using the
-   direct SCSI command. The file number status is lost but this method
-   is fast with some drives. Otherwise MTEOM is done by spacing over
-   files and the file number status is retained. */
-#define OSST_FAST_MTEOM 0
-
-/* If OSST_SCSI2LOGICAL is nonzero, the logical block addresses are used for
-   MTIOCPOS and MTSEEK by default. Vendor addresses are used if OSST_SCSI2LOGICAL
-   is zero. */
-#define OSST_SCSI2LOGICAL 0
-
-/* If OSST_SYSV is non-zero, the tape behaves according to the SYS V semantics.
-   The default is BSD semantics. */
-#define OSST_SYSV 0
-
-
-#endif
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 9c4c710dcccf..b9e7b291c129 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -228,7 +228,6 @@ static DEFINE_IDR(st_index_idr);
 
 
 
-#include "osst_detect.h"
 #ifndef SIGS_FROM_OSST
 #define SIGS_FROM_OSST \
 	{"OnStream", "SC-", "", "osst"}, \
@@ -4267,9 +4266,10 @@ static int st_probe(struct device *dev)
 	if (SDp->type != TYPE_TAPE)
 		return -ENODEV;
 	if ((stp = st_incompatible(SDp))) {
-		sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
 		sdev_printk(KERN_INFO, SDp,
-			    "st: The suggested driver is %s.\n", stp);
+			    "OnStream tapes are no longer supported;\n");
+		sdev_printk(KERN_INFO, SDp,
+			    "please mail to linux-scsi@vger.kernel.org.\n");
 		return -ENODEV;
 	}