summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorK.Prasad <prasad@linux.vnet.ibm.com>2010-06-15 08:05:19 +0200
committerPaul Mackerras <paulus@samba.org>2010-06-22 11:40:50 +0200
commit5aae8a53708025d4e718f0d2e7c2f766779ddc71 (patch)
treed151e2c29e78248cee620cf5094a15316abd17d2
parenthw_breakpoints: Allow arch-specific cleanup before breakpoint unregistration (diff)
downloadlinux-5aae8a53708025d4e718f0d2e7c2f766779ddc71.tar.xz
linux-5aae8a53708025d4e718f0d2e7c2f766779ddc71.zip
powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors
Implement perf-events based hw-breakpoint interfaces for PowerPC 64-bit server (Book III S) processors. This allows access to a given location to be used as an event that can be counted or profiled by the perf_events subsystem. This is done using the DABR (data breakpoint register), which can also be used for process debugging via ptrace. When perf_event hw_breakpoint support is configured in, the perf_event subsystem manages the DABR and arbitrates access to it, and ptrace then creates a perf_event when it is requested to set a data breakpoint. [Adopted suggestions from Paul Mackerras <paulus@samba.org> to - emulate_step() all system-wide breakpoints and single-step only the per-task breakpoints - perform arch-specific cleanup before unregistration through arch_unregister_hw_breakpoint() ] Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/include/asm/cputable.h4
-rw-r--r--arch/powerpc/include/asm/hw_breakpoint.h73
-rw-r--r--arch/powerpc/include/asm/processor.h8
-rw-r--r--arch/powerpc/kernel/Makefile1
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S1
-rw-r--r--arch/powerpc/kernel/hw_breakpoint.c325
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c3
-rw-r--r--arch/powerpc/kernel/process.c14
-rw-r--r--arch/powerpc/kernel/ptrace.c64
-rw-r--r--arch/powerpc/lib/Makefile1
11 files changed, 495 insertions, 0 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 328774bd41ee..7949afc861dd 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -141,6 +141,7 @@ config PPC
select GENERIC_ATOMIC64 if PPC32
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
config EARLY_PRINTK
bool
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index b0b21134f61a..5e2e2cfcc81b 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -517,6 +517,10 @@ static inline int cpu_has_feature(unsigned long feature)
& feature);
}
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#define HBP_NUM 1
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000000..b111713b593e
--- /dev/null
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -0,0 +1,73 @@
+/*
+ * PowerPC BookIII S hardware breakpoint definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010, IBM Corporation.
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
+#define _PPC_BOOK3S_64_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+struct arch_hw_breakpoint {
+ u8 len; /* length of the target data symbol */
+ int type;
+ unsigned long address;
+};
+
+#include <linux/kdebug.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+
+static inline int hw_breakpoint_slots(int type)
+{
+ return HBP_NUM;
+}
+struct perf_event;
+struct pmu;
+struct perf_sample_data;
+
+#define HW_BREAKPOINT_ALIGN 0x7
+/* Maximum permissible length of any HW Breakpoint */
+#define HW_BREAKPOINT_LEN 0x8
+
+extern int arch_bp_generic_fields(int type, int *gen_bp_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+ unsigned long val, void *data);
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+extern struct pmu perf_ops_bp;
+extern void ptrace_triggered(struct perf_event *bp, int nmi,
+ struct perf_sample_data *data, struct pt_regs *regs);
+static inline void hw_breakpoint_disable(void)
+{
+ set_dabr(0);
+}
+
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
+static inline void hw_breakpoint_disable(void) { }
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+#endif /* __KERNEL__ */
+#endif /* _PPC_BOOK3S_64_HW_BREAKPOINT_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 7492fe8ad6e4..19c05b0f74be 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -209,6 +209,14 @@ struct thread_struct {
#ifdef CONFIG_PPC64
unsigned long start_tb; /* Start purr when proc switched in */
unsigned long accum_tb; /* Total accumilated purr for process */
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ struct perf_event *ptrace_bps[HBP_NUM];
+ /*
+ * Helps identify source of single-step exception and subsequent
+ * hw-breakpoint enablement
+ */
+ struct perf_event *last_hit_ubp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif
unsigned long dabr; /* Data address breakpoint register */
#ifdef CONFIG_ALTIVEC
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 58d0572de6f9..01006040f59e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -34,6 +34,7 @@ obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3e423fbad6bc..f53029a01554 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -828,6 +828,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/* We have a data breakpoint exception - handle it */
handle_dabr_fault:
+ bl .save_nvgprs
ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
new file mode 100644
index 000000000000..7a2ad5e84c16
--- /dev/null
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -0,0 +1,325 @@
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers. Derived from
+ * "arch/x86/kernel/hw_breakpoint.c"
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010 IBM Corporation
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#include <linux/hw_breakpoint.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/percpu.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+#include <asm/sstep.h>
+#include <asm/uaccess.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for every cpu
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg);
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+ *slot = bp;
+
+ /*
+ * Do not install DABR values if the instruction must be single-stepped.
+ * If so, DABR will be populated in single_step_dabr_instruction().
+ */
+ if (current->thread.last_hit_ubp != bp)
+ set_dabr(info->address | info->type | DABR_TRANSLATION);
+
+ return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+ if (*slot != bp) {
+ WARN_ONCE(1, "Can't find the breakpoint");
+ return;
+ }
+
+ *slot = NULL;
+ set_dabr(0);
+}
+
+/*
+ * Perform cleanup of arch-specific counters during unregistration
+ * of the perf-event
+ */
+void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+ /*
+ * If the breakpoint is unregistered between a hw_breakpoint_handler()
+ * and the single_step_dabr_instruction(), then cleanup the breakpoint
+ * restoration variables to prevent dangling pointers.
+ */
+ if (bp->ctx->task)
+ bp->ctx->task->thread.last_hit_ubp = NULL;
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+ return is_kernel_addr(info->address);
+}
+
+int arch_bp_generic_fields(int type, int *gen_bp_type)
+{
+ switch (type) {
+ case DABR_DATA_READ:
+ *gen_bp_type = HW_BREAKPOINT_R;
+ break;
+ case DABR_DATA_WRITE:
+ *gen_bp_type = HW_BREAKPOINT_W;
+ break;
+ case (DABR_DATA_WRITE | DABR_DATA_READ):
+ *gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+ int ret = -EINVAL;
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+ if (!bp)
+ return ret;
+
+ switch (bp->attr.bp_type) {
+ case HW_BREAKPOINT_R:
+ info->type = DABR_DATA_READ;
+ break;
+ case HW_BREAKPOINT_W:
+ info->type = DABR_DATA_WRITE;
+ break;
+ case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+ info->type = (DABR_DATA_READ | DABR_DATA_WRITE);
+ break;
+ default:
+ return ret;
+ }
+
+ info->address = bp->attr.bp_addr;
+ info->len = bp->attr.bp_len;
+
+ /*
+ * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8)
+ * and breakpoint addresses are aligned to nearest double-word
+ * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the
+ * 'symbolsize' should satisfy the check below.
+ */
+ if (info->len >
+ (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN)))
+ return -EINVAL;
+ return 0;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+ bool is_ptrace_bp = false;
+ int rc = NOTIFY_STOP;
+ struct perf_event *bp;
+ struct pt_regs *regs = args->regs;
+ int stepped = 1;
+ struct arch_hw_breakpoint *info;
+ unsigned int instr;
+
+ /* Disable breakpoints during exception handling */
+ set_dabr(0);
+ /*
+ * The counter may be concurrently released but that can only
+ * occur from a call_rcu() path. We can then safely fetch
+ * the breakpoint, use its callback, touch its counter
+ * while we are in an rcu_read_lock() path.
+ */
+ rcu_read_lock();
+
+ bp = __get_cpu_var(bp_per_reg);
+ if (!bp)
+ goto out;
+ info = counter_arch_bp(bp);
+ is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ?
+ true : false;
+
+ /*
+ * Return early after invoking user-callback function without restoring
+ * DABR if the breakpoint is from ptrace which always operates in
+ * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal
+ * generated in do_dabr().
+ */
+ if (is_ptrace_bp) {
+ perf_bp_event(bp, regs);
+ rc = NOTIFY_DONE;
+ goto out;
+ }
+
+ /* Do not emulate user-space instructions, instead single-step them */
+ if (user_mode(regs)) {
+ bp->ctx->task->thread.last_hit_ubp = bp;
+ regs->msr |= MSR_SE;
+ goto out;
+ }
+
+ stepped = 0;
+ instr = 0;
+ if (!__get_user_inatomic(instr, (unsigned int *) regs->nip))
+ stepped = emulate_step(regs, instr);
+
+ /*
+ * emulate_step() could not execute it. We've failed in reliably
+ * handling the hw-breakpoint. Unregister it and throw a warning
+ * message to let the user know about it.
+ */
+ if (!stepped) {
+ WARN(1, "Unable to handle hardware breakpoint. Breakpoint at "
+ "0x%lx will be disabled.", info->address);
+ perf_event_disable(bp);
+ goto out;
+ }
+ /*
+ * As a policy, the callback is invoked in a 'trigger-after-execute'
+ * fashion
+ */
+ perf_bp_event(bp, regs);
+
+ set_dabr(info->address | info->type | DABR_TRANSLATION);
+out:
+ rcu_read_unlock();
+ return rc;
+}
+
+/*
+ * Handle single-step exceptions following a DABR hit.
+ */
+int __kprobes single_step_dabr_instruction(struct die_args *args)
+{
+ struct pt_regs *regs = args->regs;
+ struct perf_event *bp = NULL;
+ struct arch_hw_breakpoint *bp_info;
+
+ bp = current->thread.last_hit_ubp;
+ /*
+ * Check if we are single-stepping as a result of a
+ * previous HW Breakpoint exception
+ */
+ if (!bp)
+ return NOTIFY_DONE;
+
+ bp_info = counter_arch_bp(bp);
+
+ /*
+ * We shall invoke the user-defined callback function in the single
+ * stepping handler to confirm to 'trigger-after-execute' semantics
+ */
+ perf_bp_event(bp, regs);
+
+ /*
+ * Do not disable MSR_SE if the process was already in
+ * single-stepping mode.
+ */
+ if (!test_thread_flag(TIF_SINGLESTEP))
+ regs->msr &= ~MSR_SE;
+
+ set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
+ current->thread.last_hit_ubp = NULL;
+ return NOTIFY_STOP;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(
+ struct notifier_block *unused, unsigned long val, void *data)
+{
+ int ret = NOTIFY_DONE;
+
+ switch (val) {
+ case DIE_DABR_MATCH:
+ ret = hw_breakpoint_handler(data);
+ break;
+ case DIE_SSTEP:
+ ret = single_step_dabr_instruction(data);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+ struct thread_struct *t = &tsk->thread;
+
+ unregister_hw_breakpoint(t->ptrace_bps[0]);
+ t->ptrace_bps[0] = NULL;
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+ /* TODO */
+}
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26f9900f773c..6c7c546aa1be 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -25,6 +25,7 @@
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
#include <asm/smp.h>
+#include <asm/hw_breakpoint.h>
int default_machine_kexec_prepare(struct kimage *image)
{
@@ -165,6 +166,7 @@ static void kexec_smp_down(void *arg)
while(kexec_all_irq_disabled == 0)
cpu_relax();
mb(); /* make sure all irqs are disabled before this */
+ hw_breakpoint_disable();
/*
* Now every CPU has IRQs off, we can clear out any pending
* IPIs and be sure that no more will come in after this.
@@ -180,6 +182,7 @@ static void kexec_prepare_cpus_wait(int wait_state)
{
int my_cpu, i, notified=-1;
+ hw_breakpoint_disable();
my_cpu = get_cpu();
/* Make sure each CPU has atleast made it to the state we need */
for (i=0; i < NR_CPUS; i++) {
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9d255b4f0a0e..cbf3521d50b6 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -37,6 +37,7 @@
#include <linux/kernel_stat.h>
#include <linux/personality.h>
#include <linux/random.h>
+#include <linux/hw_breakpoint.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
@@ -462,8 +463,14 @@ struct task_struct *__switch_to(struct task_struct *prev,
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
switch_booke_debug_regs(&new->thread);
#else
+/*
+ * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
+ * schedule DABR
+ */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
set_dabr(new->thread.dabr);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif
@@ -642,7 +649,11 @@ void flush_thread(void)
{
discard_lazy_cpu_state();
+#ifdef CONFIG_HAVE_HW_BREAKPOINTS
+ flush_ptrace_hw_breakpoint(current);
+#else /* CONFIG_HAVE_HW_BREAKPOINTS */
set_debug_reg_defaults(&current->thread);
+#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
}
void
@@ -660,6 +671,9 @@ void prepare_to_copy(struct task_struct *tsk)
flush_altivec_to_thread(current);
flush_vsx_to_thread(current);
flush_spe_to_thread(current);
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ flush_ptrace_hw_breakpoint(tsk);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
}
/*
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 7a0c0199ea28..11f3cd9c832f 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -32,6 +32,8 @@
#ifdef CONFIG_PPC32
#include <linux/module.h>
#endif
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -866,9 +868,34 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+void ptrace_triggered(struct perf_event *bp, int nmi,
+ struct perf_sample_data *data, struct pt_regs *regs)
+{
+ struct perf_event_attr attr;
+
+ /*
+ * Disable the breakpoint request here since ptrace has defined a
+ * one-shot behaviour for breakpoint exceptions in PPC64.
+ * The SIGTRAP signal is generated automatically for us in do_dabr().
+ * We don't have to do anything about that here
+ */
+ attr = bp->attr;
+ attr.disabled = true;
+ modify_user_hw_breakpoint(bp, &attr);
+}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
unsigned long data)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret;
+ struct thread_struct *thread = &(task->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
* For embedded processors we support one DAC and no IAC's at the
* moment.
@@ -896,6 +923,43 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
/* Ensure breakpoint translation bit is set */
if (data && !(data & DABR_TRANSLATION))
return -EIO;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ bp = thread->ptrace_bps[0];
+ if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ }
+ return 0;
+ }
+ if (bp) {
+ attr = bp->attr;
+ attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+ arch_bp_generic_fields(data &
+ (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+ ret = modify_user_hw_breakpoint(bp, &attr);
+ if (ret)
+ return ret;
+ thread->ptrace_bps[0] = bp;
+ thread->dabr = data;
+ return 0;
+ }
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+ arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, task);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ return PTR_ERR(bp);
+ }
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
/* Move contents to the DABR register */
task->thread.dabr = data;
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 7581dbffa18e..a52ed2e47ac6 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o ldstfp.o
obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o