diff options
| author | Heiko Stuebner <heiko@sntech.de> | 2018-02-19 08:59:37 +0100 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2018-02-20 10:33:55 +0100 |
| commit | 64ca41a8ff9dcc524e228e654f8bdf2dcd45c559 (patch) | |
| tree | d5f4331e1810515ab3eeb89da67f0ac92721e702 | |
| parent | arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou (diff) | |
| download | linux-64ca41a8ff9dcc524e228e654f8bdf2dcd45c559.tar.xz linux-64ca41a8ff9dcc524e228e654f8bdf2dcd45c559.zip | |
arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
The sdio signals are routed through the connector to the baseboard,
where the wifi module is also located. So move the sdio node to
the excavator as well.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Vicente Bergas <vicencb@gmail.com>
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 16 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 16 |
2 files changed, 16 insertions, 16 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index b7bd88fb3ae3..68416fae4fea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -232,6 +232,22 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 46c95ccfd5cb..31568b4e8aa1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -520,22 +520,6 @@ status = "okay"; }; -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - clock-frequency = <50000000>; - disable-wp; - keep-power-in-suspend; - max-frequency = <50000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - &sdmmc { bus-width = <4>; cap-mmc-highspeed; |