Merge tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly cosmetic changes and minor bugfixes for the SoC
  specific code, across the 32-bit at91, mvebu, davinci, samsung, and
  omap platforms.

  The main notable changes are for the Samsung Exynos platform, which
  sees a rewrite of gpio handling and a change to restore and adds a
  workaround for a problem with cpuidle support"

* tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
  MAINTAINERS: arm/amlogic: add designated reviewers
  ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()'
  ARM: davinci: Fix trivial spelling
  ARM: davinci: Replace HTTP links with HTTPS ones
  ARM: s3c24xx: Replace HTTP links with HTTPS ones
  ARM: orion/gpio: Make use of for_each_requested_gpio()
  ARM: at91: Replace HTTP links with HTTPS ones
  ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
  ARM: rpc: Change blacklist to quirklist in ecode.c file
  ARM: OMAP: Replace HTTP links with HTTPS ones
  ARM: s3c24xx: leds: Convert to use GPIO descriptors
  udc: lpc32xx: mark local function static
  ARM: exynos: MCPM: Restore big.LITTLE cpuidle support
  ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val

41 files changed, 267 insertions, 142 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index d97339ff79d1..9193fd3cfb55 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1606,6 +1606,9 @@ F:	sound/soc/meson/
 
 ARM/Amlogic Meson SoC support
 M:	Kevin Hilman <khilman@baylibre.com>
+R:	Neil Armstrong <narmstrong@baylibre.com>
+R:	Jerome Brunet <jbrunet@baylibre.com>
+R:	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-amlogic@lists.infradead.org
 S:	Maintained
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f2e7609e5346..87c517d65f62 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree for DA850 EVM board
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 #include "da850.dtsi"
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index cec195d4fcba..5dde7328a7a9 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 # Empty file waiting for deletion once Makefile.boot isn't needed any more.
 # Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
+# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 074bde64064e..2aab043441e8 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -592,13 +592,13 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
@@ -606,12 +606,17 @@ static void __init at91_pm_sram_init(void)
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static bool __init at91_is_pm_mode_active(int pm_mode)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index d028d38a44bf..f56ff8c24043 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -201,15 +201,13 @@ config MACH_MITYOMAPL138
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
-	  http://www.mitydsp.com
+	  https://www.mitydsp.com
 
 config MACH_OMAPL138_HAWKBOARD
 	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 	depends on ARCH_DAVINCI_DA850
 	help
 	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-	  Information of this board may be found at
-	  http://www.hawkboard.org/
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a273ab25c668..1076886938b6 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -266,7 +266,7 @@ static struct mtd_partition da830_evm_nand_partitions[] = {
 	}
 };
 
-/* flash bbt decriptors */
+/* flash bbt descriptors */
 static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
 static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..6751292e5f8f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 EVM board
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
  * Original Copyrights follow:
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..dd7d60f4139a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -267,20 +267,15 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
 		evm_sw_gpio[i] = gpio++;
 
 		status = gpio_direction_input(evm_sw_gpio[i]);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
+		if (status)
 			goto out_free;
-		}
 
 		status = gpio_export(evm_sw_gpio[i], 0);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
+		if (status)
 			goto out_free;
-		}
 	}
-	return status;
+	return 0;
+
 out_free:
 	for (i = 0; i < 4; ++i) {
 		if (evm_sw_gpio[i] != -EINVAL) {
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index dfce421c0579..3382b93d9a2a 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -1,7 +1,7 @@
 /*
  * Critical Link MityOMAP-L138 SoM
  *
- * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
+ * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index ce99f782811a..6cf46bbc7e1d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -214,7 +214,7 @@ static __init void davinci_ntosd2_init(void)
 	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
 	 * The AEAWx are five new AEAW pins that can be muxed by separately.
 	 * They are a bitmask for GPIO management. According TI
-	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
 	 * gpio(10,11,12,13) for leds any combination of bits works except
 	 * four last. So we are to reset all five.
 	 */
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 5390a8630cf0..6c79039002c9 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -3,7 +3,7 @@
  *
  * Initial code: Syed Mohammed Khasim
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index b795f671bd03..dd38785536d5 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -2,7 +2,7 @@
 /*
  * CPU idle for DaVinci SoCs
  *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/
  *
  * Derived from Marvell Kirkwood CPU idle code
  * (arch/arm/mach-kirkwood/cpuidle.c)
diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 74f088b0edfb..0d9193aefab5 100644
--- a/arch/arm/mach-davinci/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci cpuidle platform support
  *
- * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 73b7cc53f966..68156e7239a6 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 chip specific setup
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 9c0dd028d5ad..0cd2f30aeb9c 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Modified from mach-omap/omap2/board-generic.c
  */
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h
index 37b19bf35a85..5a5f0ecc0704 100644
--- a/arch/arm/mach-davinci/include/mach/pm.h
+++ b/arch/arm/mach-davinci/include/mach/pm.h
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci platform support for power management.
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index e33c6bcb4598..323ee4e657c4 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -2,7 +2,7 @@
 /*
  * DaVinci Power Management Routines
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  */
 
 #include <linux/pm.h>
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 71262dcdbca3..d5affab4396d 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
+ * (C) Copyright 2009, Texas Instruments, Inc. https://www.ti.com/
  */
 
 /* replicated define because linux/bitops.h cannot be included in assembly */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 7a8d1555db40..36c37444485a 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -193,7 +193,7 @@ static void __init exynos_dt_fixup(void)
 }
 
 DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
-	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_val	= 0x3c400000,
 	.l2c_aux_mask	= 0xc20fffff,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 9a681b421ae1..cd861c57d5ad 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,7 @@
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
 static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
@@ -58,15 +59,16 @@ static void __iomem *ns_sram_base_addr __ro_after_init;
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	if (!exynos_cpu_power_state(cpunr)) {
-		exynos_cpu_power_up(cpunr);
-
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
 		/*
 		 * This assumes the cluster number of the big cores(Cortex A15)
 		 * is 0 and the Little cores(Cortex A7) is 1.
@@ -258,6 +260,8 @@ static int __init exynos_mcpm_init(void)
 		return -ENOMEM;
 	}
 
+	secure_firmware = exynos_secure_firmware_available();
+
 	/*
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 948da556162e..9536b8f3c07d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -146,7 +146,7 @@ config MACH_SX1
 	  Support for the Siemens SX1 phone. To boot the kernel,
 	  you'll need a SX1 compatible bootloader; check out
 	  http://forum.oslik.ru and
-	  http://www.handhelds.org/moin/moin.cgi/SiemensSX1
+	  https://www.handhelds.org/moin/moin.cgi/SiemensSX1
 	  for more information.
 	  Say Y here if you have such a phone, say NO otherwise.
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 0ad8bdc2ed61..2bf659fb6099 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -10,7 +10,7 @@
  * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Converted DMA library into platform driver
  *                   - G, Manjunath Kondaiah <manjugk@ti.com>
  */
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 312a0924d786..3ec08bd5d8a0 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP15xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5b7a29b294d4..500cfd416c42 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP16xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 0e5f68de23bf..aeb81c18ffcc 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP7xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 4447210c9b0d..97fc2096b970 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -6,7 +6,7 @@
  * device model. It also has a low level function to change the timer
  * input clock source.
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
  *
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 75cfad2cb143..827b50f1c73e 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -63,7 +63,7 @@ struct ecard_request {
 	struct completion *complete;
 };
 
-struct expcard_blacklist {
+struct expcard_quirklist {
 	unsigned short	 manufacturer;
 	unsigned short	 product;
 	const char	*type;
@@ -79,7 +79,7 @@ static void atomwide_3p_quirk(ecard_t *ec);
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
  */
-static struct expcard_blacklist __initdata blacklist[] = {
+static struct expcard_quirklist quirklist[] __initdata = {
 	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
 	{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
 };
@@ -935,13 +935,13 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 		ec->fiqmask = 4;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
-		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
-		    blacklist[i].product == ec->cid.product) {
-		    	if (blacklist[i].type)
-				ec->card_desc = blacklist[i].type;
-			if (blacklist[i].init)
-				blacklist[i].init(ec);
+	for (i = 0; i < ARRAY_SIZE(quirklist); i++)
+		if (quirklist[i].manufacturer == ec->cid.manufacturer &&
+		    quirklist[i].product == ec->cid.product) {
+			if (quirklist[i].type)
+				ec->card_desc = quirklist[i].type;
+			if (quirklist[i].init)
+				quirklist[i].init(ec);
 			break;
 		}
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index c5c06d98b147..7673dde9671a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -267,7 +267,7 @@ config MACH_TCT_HAMMER
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the TinCanTools Hammer Board
-	  <http://www.tincantools.com>
+	  <https://www.tincantools.com>
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..75064dfaceb1 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -14,6 +14,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 
@@ -44,29 +45,53 @@
 
 /* LED devices */
 
+static struct gpiod_lookup_table smdk_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led5_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led6_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led7_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF(4),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
 
@@ -179,27 +204,25 @@ static struct platform_device __initdata *smdk_devs[] = {
 	&smdk_led7,
 };
 
-static const struct gpio smdk_led_gpios[] = {
-	{ S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
-};
-
 void __init smdk_machine_init(void)
 {
-	/* Configure the LEDs (even if we have no LED support)*/
-
-	int ret = gpio_request_array(smdk_led_gpios,
-				     ARRAY_SIZE(smdk_led_gpios));
-	if (!WARN_ON(ret < 0))
-		gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
-
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
 	s3c_nand_set_platdata(&smdk_nand_info);
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&smdk_led4_gpio_table);
+	gpiod_add_lookup_table(&smdk_led5_gpio_table);
+	gpiod_add_lookup_table(&smdk_led6_gpio_table);
+	gpiod_add_lookup_table(&smdk_led7_gpio_table);
+
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index e1c372e5447b..f4710052843a 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2003-2005 Simtec Electronics
 //   Ben Dooks <ben@simtec.co.uk>
 //
-// http://www.handhelds.org/projects/h1940.html
+// https://www.handhelds.org/projects/h1940.html
 
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..235749448311 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -6,7 +6,7 @@
 //      Weibing <http://weibing.blogbus.com> and
 //      Michel Pollet <buserror@gmail.com>
 //
-// For product information, visit http://code.google.com/p/mini2440/
+// For product information, visit https://code.google.com/p/mini2440/
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -402,37 +402,68 @@ static struct platform_device mini2440_button_device = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table mini2440_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.4",
+	.table = {
+		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
+	.dev_id = "s3c24xx_led.5",
+	.table = {
+		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
 static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
 static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
-	.gpio		= S3C2410_GPB(8),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
-	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
@@ -714,6 +745,20 @@ static void __init mini2440_init(void)
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
+	gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
+
 	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
 
 	if (features.count)	/* the optional features */
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index d856f23939af..998ccff3c174 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -9,7 +9,7 @@
 // Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
 //
 // There is a wiki with more information about the n30 port at
-// http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -45,6 +45,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/samsung-time.h>
@@ -246,17 +247,33 @@ static struct platform_device n35_button_device = {
 };
 
 /* This is the bluetooth LED on the device. */
+
+static struct gpiod_lookup_table n30_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
 /* This is the blue LED on the device. Originally used to indicate GPS activity
  * by flashing. */
+
+static struct gpiod_lookup_table n35_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPD(8),
 	.def_trigger	= "",
 };
 
@@ -264,17 +281,30 @@ static struct s3c24xx_led_platdata n35_blue_led_pdata = {
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
  * to force the LED to blink red, so call that warning LED.  */
+
+static struct gpiod_lookup_table n30_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
+static struct gpiod_lookup_table n35_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
@@ -577,6 +607,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
+
 		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
 	}
 
@@ -594,6 +630,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND1,
 				      S3C2410_MISCCR_USBSUSPND0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
+
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
 }
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..ff9e3197309b 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -177,9 +177,15 @@ static struct platform_device qt2410_cs89x0 = {
 
 /* LED */
 
+static struct gpiod_lookup_table qt2410_led_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB(0),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
 };
@@ -338,6 +344,8 @@ static void __init qt2410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 
 	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&qt2410_led_gpio_table);
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
 }
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 529c6faf862f..995f1ff34a1b 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2003-2004 Simtec Electronics
 //	Ben Dooks <ben@simtec.co.uk>
 //
-// http://www.handhelds.org/projects/rx3715.html
+// https://www.handhelds.org/projects/rx3715.html
 
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 853e74f9b8b5..6a3fb2becc7c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -13,6 +13,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -40,6 +41,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"
@@ -223,21 +225,42 @@ static struct platform_device vr1000_dm9k1 = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table vr1000_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -317,6 +340,15 @@ static void __init vr1000_init_time(void)
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+	/* Disable pull-up on LED lines and register GPIO lookups */
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
+
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index 6ed887cf8dc9..365c0428b21b 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -49,14 +49,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -67,7 +67,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -81,6 +81,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7d859994ff95..b2e9e822426f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -16,7 +16,7 @@
  *
  * Support functions for the OMAP internal DMA channels.
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Converted DMA library into DMA platform driver.
  *	- G, Manjunath Kondaiah <manjugk@ti.com>
  */
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 26a531ebb6e9..734f0be4f14a 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -442,6 +442,7 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	const char *label;
 	int i;
 
 	out	= readl_relaxed(GPIO_OUT(ochip));
@@ -453,15 +454,10 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 	edg_msk	= readl_relaxed(GPIO_EDGE_MASK(ochip));
 	lvl_msk	= readl_relaxed(GPIO_LEVEL_MASK(ochip));
 
-	for (i = 0; i < chip->ngpio; i++) {
-		const char *label;
+	for_each_requested_gpio(chip, i, label) {
 		u32 msk;
 		bool is_out;
 
-		label = gpiochip_is_requested(chip, i);
-		if (!label)
-			continue;
-
 		msk = 1 << i;
 		is_out = !(io_conf & msk);
 
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index f8b8d6e313ee..9b5e67664ba3 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -11,19 +11,19 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 
 #include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
 
 /* our context */
 
 struct s3c24xx_gpio_led {
 	struct led_classdev		 cdev;
 	struct s3c24xx_led_platdata	*pdata;
+	struct gpio_desc		*gpiod;
 };
 
 static inline struct s3c24xx_gpio_led *to_gpio(struct led_classdev *led_cdev)
@@ -35,20 +35,8 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev,
 			    enum led_brightness value)
 {
 	struct s3c24xx_gpio_led *led = to_gpio(led_cdev);
-	struct s3c24xx_led_platdata *pd = led->pdata;
-	int state = (value ? 1 : 0) ^ (pd->flags & S3C24XX_LEDF_ACTLOW);
 
-	/* there will be a short delay between setting the output and
-	 * going from output to input when using tristate. */
-
-	gpio_set_value(pd->gpio, state);
-
-	if (pd->flags & S3C24XX_LEDF_TRISTATE) {
-		if (value)
-			gpio_direction_output(pd->gpio, state);
-		else
-			gpio_direction_input(pd->gpio);
-	}
+	gpiod_set_value(led->gpiod, !!value);
 }
 
 static int s3c24xx_led_probe(struct platform_device *dev)
@@ -69,22 +57,12 @@ static int s3c24xx_led_probe(struct platform_device *dev)
 
 	led->pdata = pdata;
 
-	ret = devm_gpio_request(&dev->dev, pdata->gpio, "S3C24XX_LED");
-	if (ret < 0)
-		return ret;
-
-	/* no point in having a pull-up if we are always driving */
-
-	s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
-
-	if (pdata->flags & S3C24XX_LEDF_TRISTATE)
-		gpio_direction_input(pdata->gpio);
-	else
-		gpio_direction_output(pdata->gpio,
-			pdata->flags & S3C24XX_LEDF_ACTLOW ? 1 : 0);
+	/* Default to off */
+	led->gpiod = devm_gpiod_get(&dev->dev, NULL, GPIOD_OUT_LOW);
+	if (IS_ERR(led->gpiod))
+		return PTR_ERR(led->gpiod);
 
 	/* register our new led device */
-
 	ret = devm_led_classdev_register(&dev->dev, &led->cdev);
 	if (ret < 0)
 		dev_err(&dev->dev, "led_classdev_register failed\n");
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 465d0b7c6522..4a112670cc6c 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -1926,7 +1926,7 @@ static const struct usb_ep_ops lpc32xx_ep_ops = {
 };
 
 /* Send a ZLP on a non-0 IN EP */
-void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+static void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 {
 	/* Clear EP status */
 	udc_clearep_getsts(udc, ep->hwep_num);
@@ -1940,7 +1940,7 @@ void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
  * This function will only be called when a delayed ZLP needs to be sent out
  * after a DMA transfer has filled both buffers.
  */
-void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+static void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
 {
 	u32 epstatus;
 	struct lpc32xx_request *req;
diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h
index 5bbae85811e2..64f8d14876e0 100644
--- a/include/linux/platform_data/leds-s3c24xx.h
+++ b/include/linux/platform_data/leds-s3c24xx.h
@@ -10,13 +10,7 @@
 #ifndef __LEDS_S3C24XX_H
 #define __LEDS_S3C24XX_H
 
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
 struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
 	char			*name;
 	char			*def_trigger;
 };