diff options
author | Arnd Bergmann <arnd@arndb.de> | 2018-12-20 16:10:32 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2018-12-20 16:10:36 +0100 |
commit | 9f23b7ba6379fd80f0857cf4750e9eda83fe5408 (patch) | |
tree | b4593e14df9755e8891d8230e38a00ce7bb12621 | |
parent | Merge tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/sc... (diff) | |
parent | memory: pl353: Add driver for arm pl353 static memory controller (diff) | |
download | linux-9f23b7ba6379fd80f0857cf4750e9eda83fe5408.tar.xz linux-9f23b7ba6379fd80f0857cf4750e9eda83fe5408.zip |
Merge tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/drivers
ARM: Xilinx Zynq SoC patches for v5.0
- Adding pl353 smc driver
* tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx:
memory: pl353: Add driver for arm pl353 static memory controller
dt-bindings: memory: Add pl353 smc controller devicetree binding information
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-rw-r--r-- | Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt | 47 | ||||
-rw-r--r-- | drivers/memory/Kconfig | 9 | ||||
-rw-r--r-- | drivers/memory/Makefile | 1 | ||||
-rw-r--r-- | drivers/memory/pl353-smc.c | 463 | ||||
-rw-r--r-- | include/linux/pl353-smc.h | 30 |
5 files changed, 550 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt new file mode 100644 index 000000000000..d56615fd343a --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt @@ -0,0 +1,47 @@ +Device tree bindings for ARM PL353 static memory controller + +PL353 static memory controller supports two kinds of memory +interfaces.i.e NAND and SRAM/NOR interfaces. +The actual devices are instantiated from the child nodes of pl353 smc node. + +Required properties: +- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell". +- reg : Controller registers map and length. +- clock-names : List of input clock names - "memclk", "apb_pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). +- address-cells : Must be 2. +- size-cells : Must be 1. + +Child nodes: + For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are +supported as child nodes. + +for NAND partition information please refer the below file +Documentation/devicetree/bindings/mtd/partition.txt + +Example: + smcc: memory-controller@e000e000 + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + reg = <0xe000e000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region + 0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region + 0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region + nand_0: flash@e1000000 { + compatible = "arm,pl353-nand-r2p1" + reg = <0 0 0x1000000>; + (...) + }; + nor0: flash@e2000000 { + compatible = "cfi-flash"; + reg = <1 0 0x2000000>; + }; + nor1: flash@e4000000 { + compatible = "cfi-flash"; + reg = <2 0 0x2000000>; + }; + }; diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 63389f075f1d..2d91b00e3591 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -145,6 +145,15 @@ config DA8XX_DDRCTL Texas Instruments da8xx SoCs. It's used to tweak various memory controller configuration options. +config PL353_SMC + tristate "ARM PL35X Static Memory Controller(SMC) driver" + default y + depends on ARM + depends on ARM_AMBA + help + This driver is for the ARM PL351/PL353 Static Memory + Controller(SMC) module. + source "drivers/memory/samsung/Kconfig" source "drivers/memory/tegra/Kconfig" diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index a01ab3e22f94..90161dec6fa5 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o obj-$(CONFIG_MTK_SMI) += mtk-smi.o obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o +obj-$(CONFIG_PL353_SMC) += pl353-smc.o obj-$(CONFIG_SAMSUNG_MC) += samsung/ obj-$(CONFIG_TEGRA_MC) += tegra/ diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c new file mode 100644 index 000000000000..73bd3023202f --- /dev/null +++ b/drivers/memory/pl353-smc.c @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM PL353 SMC driver + * + * Copyright (C) 2012 - 2018 Xilinx, Inc + * Author: Punnaiah Choudary Kalluri <punnaiah@xilinx.com> + * Author: Naga Sureshkumar Relli <nagasure@xilinx.com> + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/pl353-smc.h> +#include <linux/amba/bus.h> + +/* Register definitions */ +#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */ +#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */ +#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */ +#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */ +#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */ +#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */ +#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */ +#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */ +#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */ +#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */ + +/* Controller status register specific constants */ +#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6 + +/* Clear configuration register specific constants */ +#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10 +#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40 +#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2 +#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \ + PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \ + PL353_SMC_CFG_CLR_INT_DIS_1) + +/* Set cycles register specific constants */ +#define PL353_SMC_SET_CYCLES_T0_MASK 0xF +#define PL353_SMC_SET_CYCLES_T0_SHIFT 0 +#define PL353_SMC_SET_CYCLES_T1_MASK 0xF +#define PL353_SMC_SET_CYCLES_T1_SHIFT 4 +#define PL353_SMC_SET_CYCLES_T2_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T2_SHIFT 8 +#define PL353_SMC_SET_CYCLES_T3_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T3_SHIFT 11 +#define PL353_SMC_SET_CYCLES_T4_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T4_SHIFT 14 +#define PL353_SMC_SET_CYCLES_T5_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T5_SHIFT 17 +#define PL353_SMC_SET_CYCLES_T6_MASK 0xF +#define PL353_SMC_SET_CYCLES_T6_SHIFT 20 + +/* ECC status register specific constants */ +#define PL353_SMC_ECC_STATUS_BUSY BIT(6) +#define PL353_SMC_ECC_REG_SIZE_OFFS 4 + +/* ECC memory config register specific constants */ +#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC +#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2 +#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0xC + +#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \ + (2 << 21)) /* UpdateRegs operation */ + +#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \ + (0 << 8) | /* Read command */ \ + (0x30 << 16) | /* Read End command */ \ + (1 << 24)) /* Read End command calid */ + +#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \ + (5 << 8) | /* Read col change cmd */ \ + (0xE0 << 16) | /* Read col change end cmd */ \ + (1 << 24)) /* Read col change end cmd valid */ +#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ) +/** + * struct pl353_smc_data - Private smc driver structure + * @memclk: Pointer to the peripheral clock + * @aclk: Pointer to the APER clock + */ +struct pl353_smc_data { + struct clk *memclk; + struct clk *aclk; +}; + +/* SMC virtual register base */ +static void __iomem *pl353_smc_base; + +/** + * pl353_smc_set_buswidth - Set memory buswidth + * @bw: Memory buswidth (8 | 16) + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_buswidth(unsigned int bw) +{ + if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16) + return -EINVAL; + + writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); + + return 0; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth); + +/** + * pl353_smc_set_cycles - Set memory timing parameters + * @timings: NAND controller timing parameters + * + * Sets NAND chip specific timing parameters. + */ +void pl353_smc_set_cycles(u32 timings[]) +{ + /* + * Set write pulse timing. This one is easy to extract: + * + * NWE_PULSE = tWP + */ + timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK; + timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) << + PL353_SMC_SET_CYCLES_T1_SHIFT; + timings[2] = (timings[2] & PL353_SMC_SET_CYCLES_T2_MASK) << + PL353_SMC_SET_CYCLES_T2_SHIFT; + timings[3] = (timings[3] & PL353_SMC_SET_CYCLES_T3_MASK) << + PL353_SMC_SET_CYCLES_T3_SHIFT; + timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) << + PL353_SMC_SET_CYCLES_T4_SHIFT; + timings[5] = (timings[5] & PL353_SMC_SET_CYCLES_T5_MASK) << + PL353_SMC_SET_CYCLES_T5_SHIFT; + timings[6] = (timings[6] & PL353_SMC_SET_CYCLES_T6_MASK) << + PL353_SMC_SET_CYCLES_T6_SHIFT; + timings[0] |= timings[1] | timings[2] | timings[3] | + timings[4] | timings[5] | timings[6]; + + writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); +} +EXPORT_SYMBOL_GPL(pl353_smc_set_cycles); + +/** + * pl353_smc_ecc_is_busy - Read ecc busy flag + * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle + */ +bool pl353_smc_ecc_is_busy(void) +{ + return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) & + PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY); +} +EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy); + +/** + * pl353_smc_get_ecc_val - Read ecc_valueN registers + * @ecc_reg: Index of the ecc_value reg (0..3) + * Return: the content of the requested ecc_value register. + * + * There are four valid ecc_value registers. The argument is truncated to stay + * within this valid boundary. + */ +u32 pl353_smc_get_ecc_val(int ecc_reg) +{ + u32 addr, reg; + + addr = PL353_SMC_ECC_VALUE0_OFFS + + (ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS); + reg = readl(pl353_smc_base + addr); + + return reg; +} +EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val); + +/** + * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit + * Return: the raw_int_status1 bit from the memc_status register + */ +int pl353_smc_get_nand_int_status_raw(void) +{ + u32 reg; + + reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS); + reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT; + reg &= 1; + + return reg; +} +EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw); + +/** + * pl353_smc_clr_nand_int - Clear NAND interrupt + */ +void pl353_smc_clr_nand_int(void) +{ + writel(PL353_SMC_CFG_CLR_INT_CLR_1, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); +} +EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int); + +/** + * pl353_smc_set_ecc_mode - Set SMC ECC mode + * @mode: ECC mode (BYPASS, APB, MEM) + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode) +{ + u32 reg; + int ret = 0; + + switch (mode) { + case PL353_SMC_ECCMODE_BYPASS: + case PL353_SMC_ECCMODE_APB: + case PL353_SMC_ECCMODE_MEM: + + reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK; + reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT; + writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode); + +/** + * pl353_smc_set_ecc_pg_size - Set SMC ECC page size + * @pg_sz: ECC page size + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_ecc_pg_size(unsigned int pg_sz) +{ + u32 reg, sz; + + switch (pg_sz) { + case 0: + sz = 0; + break; + case SZ_512: + sz = 1; + break; + case SZ_1K: + sz = 2; + break; + case SZ_2K: + sz = 3; + break; + default: + return -EINVAL; + } + + reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK; + reg |= sz; + writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + + return 0; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size); + +static int __maybe_unused pl353_smc_suspend(struct device *dev) +{ + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); + + clk_disable(pl353_smc->memclk); + clk_disable(pl353_smc->aclk); + + return 0; +} + +static int __maybe_unused pl353_smc_resume(struct device *dev) +{ + int ret; + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); + + ret = clk_enable(pl353_smc->aclk); + if (ret) { + dev_err(dev, "Cannot enable axi domain clock.\n"); + return ret; + } + + ret = clk_enable(pl353_smc->memclk); + if (ret) { + dev_err(dev, "Cannot enable memory clock.\n"); + clk_disable(pl353_smc->aclk); + return ret; + } + + return ret; +} + +static struct amba_driver pl353_smc_driver; + +static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend, + pl353_smc_resume); + +/** + * pl353_smc_init_nand_interface - Initialize the NAND interface + * @adev: Pointer to the amba_device struct + * @nand_node: Pointer to the pl353_nand device_node struct + */ +static void pl353_smc_init_nand_interface(struct amba_device *adev, + struct device_node *nand_node) +{ + unsigned long timeout; + + pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8); + writel(PL353_SMC_CFG_CLR_INT_CLR_1, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); + + timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT; + /* Wait till the ECC operation is complete */ + do { + if (pl353_smc_ecc_is_busy()) + cpu_relax(); + else + break; + } while (!time_after_eq(jiffies, timeout)); + + if (time_after_eq(jiffies, timeout)) + return; + + writel(PL353_NAND_ECC_CMD1, + pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS); + writel(PL353_NAND_ECC_CMD2, + pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS); +} + +static const struct of_device_id pl353_smc_supported_children[] = { + { + .compatible = "cfi-flash" + }, + { + .compatible = "arm,pl353-nand-r2p1", + .data = pl353_smc_init_nand_interface + }, + {} +}; + +static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct pl353_smc_data *pl353_smc; + struct device_node *child; + struct resource *res; + int err; + struct device_node *of_node = adev->dev.of_node; + static void (*init)(struct amba_device *adev, + struct device_node *nand_node); + const struct of_device_id *match = NULL; + + pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL); + if (!pl353_smc) + return -ENOMEM; + + /* Get the NAND controller virtual address */ + res = &adev->res; + pl353_smc_base = devm_ioremap_resource(&adev->dev, res); + if (IS_ERR(pl353_smc_base)) + return PTR_ERR(pl353_smc_base); + + pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk"); + if (IS_ERR(pl353_smc->aclk)) { + dev_err(&adev->dev, "aclk clock not found.\n"); + return PTR_ERR(pl353_smc->aclk); + } + + pl353_smc->memclk = devm_clk_get(&adev->dev, "memclk"); + if (IS_ERR(pl353_smc->memclk)) { + dev_err(&adev->dev, "memclk clock not found.\n"); + return PTR_ERR(pl353_smc->memclk); + } + + err = clk_prepare_enable(pl353_smc->aclk); + if (err) { + dev_err(&adev->dev, "Unable to enable AXI clock.\n"); + return err; + } + + err = clk_prepare_enable(pl353_smc->memclk); + if (err) { + dev_err(&adev->dev, "Unable to enable memory clock.\n"); + goto out_clk_dis_aper; + } + + amba_set_drvdata(adev, pl353_smc); + + /* clear interrupts */ + writel(PL353_SMC_CFG_CLR_DEFAULT_MASK, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); + + /* Find compatible children. Only a single child is supported */ + for_each_available_child_of_node(of_node, child) { + match = of_match_node(pl353_smc_supported_children, child); + if (!match) { + dev_warn(&adev->dev, "unsupported child node\n"); + continue; + } + break; + } + if (!match) { + dev_err(&adev->dev, "no matching children\n"); + goto out_clk_disable; + } + + init = match->data; + if (init) + init(adev, child); + of_platform_device_create(child, NULL, &adev->dev); + + return 0; + +out_clk_disable: + clk_disable_unprepare(pl353_smc->memclk); +out_clk_dis_aper: + clk_disable_unprepare(pl353_smc->aclk); + + return err; +} + +static int pl353_smc_remove(struct amba_device *adev) +{ + struct pl353_smc_data *pl353_smc = amba_get_drvdata(adev); + + clk_disable_unprepare(pl353_smc->memclk); + clk_disable_unprepare(pl353_smc->aclk); + + return 0; +} + +static const struct amba_id pl353_ids[] = { + { + .id = 0x00041353, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; +MODULE_DEVICE_TABLE(amba, pl353_ids); + +static struct amba_driver pl353_smc_driver = { + .drv = { + .owner = THIS_MODULE, + .name = "pl353-smc", + .pm = &pl353_smc_dev_pm_ops, + }, + .id_table = pl353_ids, + .probe = pl353_smc_probe, + .remove = pl353_smc_remove, +}; + +module_amba_driver(pl353_smc_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("ARM PL353 SMC Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/pl353-smc.h b/include/linux/pl353-smc.h new file mode 100644 index 000000000000..0e0d3df9bf72 --- /dev/null +++ b/include/linux/pl353-smc.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM PL353 SMC Driver Header + * + * Copyright (C) 2012 - 2018 Xilinx, Inc + */ + +#ifndef __LINUX_PL353_SMC_H +#define __LINUX_PL353_SMC_H + +enum pl353_smc_ecc_mode { + PL353_SMC_ECCMODE_BYPASS = 0, + PL353_SMC_ECCMODE_APB = 1, + PL353_SMC_ECCMODE_MEM = 2 +}; + +enum pl353_smc_mem_width { + PL353_SMC_MEM_WIDTH_8 = 0, + PL353_SMC_MEM_WIDTH_16 = 1 +}; + +u32 pl353_smc_get_ecc_val(int ecc_reg); +bool pl353_smc_ecc_is_busy(void); +int pl353_smc_get_nand_int_status_raw(void); +void pl353_smc_clr_nand_int(void); +int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode); +int pl353_smc_set_ecc_pg_size(unsigned int pg_sz); +int pl353_smc_set_buswidth(unsigned int bw); +void pl353_smc_set_cycles(u32 timings[]); +#endif |