diff options
author | Horatiu Vultur <horatiu.vultur@microchip.com> | 2022-04-01 13:05:21 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-04-04 13:40:42 +0200 |
commit | b814403a8cd8b28a2c0497e211f029786394531d (patch) | |
tree | cb52be640debe4993a8cca07369bf1e1d2d877fa | |
parent | dt-bindings: net: micrel: Revert latency support and timestamping check (diff) | |
download | linux-b814403a8cd8b28a2c0497e211f029786394531d.tar.xz linux-b814403a8cd8b28a2c0497e211f029786394531d.zip |
net: phy: micrel: Remove latency from driver
Based on the discussions here[1], the PHY driver is the wrong place
to set the latencies, therefore remove them.
[1] https://lkml.org/lkml/2022/3/4/325
Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/phy/micrel.c | 102 |
1 files changed, 1 insertions, 101 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 19b11e896460..a873df07ad24 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -99,15 +99,6 @@ #define PTP_TIMESTAMP_EN_PDREQ_ BIT(2) #define PTP_TIMESTAMP_EN_PDRES_ BIT(3) -#define PTP_RX_LATENCY_1000 0x0224 -#define PTP_TX_LATENCY_1000 0x0225 - -#define PTP_RX_LATENCY_100 0x0222 -#define PTP_TX_LATENCY_100 0x0223 - -#define PTP_RX_LATENCY_10 0x0220 -#define PTP_TX_LATENCY_10 0x0221 - #define PTP_TX_PARSE_L2_ADDR_EN 0x0284 #define PTP_RX_PARSE_L2_ADDR_EN 0x0244 @@ -268,15 +259,6 @@ struct lan8814_ptp_rx_ts { u16 seq_id; }; -struct kszphy_latencies { - u16 rx_10; - u16 tx_10; - u16 rx_100; - u16 tx_100; - u16 rx_1000; - u16 tx_1000; -}; - struct kszphy_ptp_priv { struct mii_timestamper mii_ts; struct phy_device *phydev; @@ -296,7 +278,6 @@ struct kszphy_ptp_priv { struct kszphy_priv { struct kszphy_ptp_priv ptp_priv; - struct kszphy_latencies latencies; const struct kszphy_type *type; int led_mode; bool rmii_ref_clk_sel; @@ -304,14 +285,6 @@ struct kszphy_priv { u64 stats[ARRAY_SIZE(kszphy_hw_stats)]; }; -static struct kszphy_latencies lan8814_latencies = { - .rx_10 = 0x22AA, - .tx_10 = 0x2E4A, - .rx_100 = 0x092A, - .tx_100 = 0x02C1, - .rx_1000 = 0x01AD, - .tx_1000 = 0x00C9, -}; static const struct kszphy_type ksz8021_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, .has_broadcast_disable = true, @@ -2618,55 +2591,6 @@ static int lan8814_ptp_probe_once(struct phy_device *phydev) return 0; } -static int lan8814_read_status(struct phy_device *phydev) -{ - struct kszphy_priv *priv = phydev->priv; - struct kszphy_latencies *latencies = &priv->latencies; - int err; - int regval; - - err = genphy_read_status(phydev); - if (err) - return err; - - switch (phydev->speed) { - case SPEED_1000: - lanphy_write_page_reg(phydev, 5, PTP_RX_LATENCY_1000, - latencies->rx_1000); - lanphy_write_page_reg(phydev, 5, PTP_TX_LATENCY_1000, - latencies->tx_1000); - break; - case SPEED_100: - lanphy_write_page_reg(phydev, 5, PTP_RX_LATENCY_100, - latencies->rx_100); - lanphy_write_page_reg(phydev, 5, PTP_TX_LATENCY_100, - latencies->tx_100); - break; - case SPEED_10: - lanphy_write_page_reg(phydev, 5, PTP_RX_LATENCY_10, - latencies->rx_10); - lanphy_write_page_reg(phydev, 5, PTP_TX_LATENCY_10, - latencies->tx_10); - break; - default: - break; - } - - /* Make sure the PHY is not broken. Read idle error count, - * and reset the PHY if it is maxed out. - */ - regval = phy_read(phydev, MII_STAT1000); - if ((regval & 0xFF) == 0xFF) { - phy_init_hw(phydev); - phydev->link = 0; - if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) - phydev->drv->config_intr(phydev); - return genphy_config_aneg(phydev); - } - - return 0; -} - static int lan8814_config_init(struct phy_device *phydev) { int val; @@ -2690,27 +2614,6 @@ static int lan8814_config_init(struct phy_device *phydev) return 0; } -static void lan8814_parse_latency(struct phy_device *phydev) -{ - const struct device_node *np = phydev->mdio.dev.of_node; - struct kszphy_priv *priv = phydev->priv; - struct kszphy_latencies *latency = &priv->latencies; - u32 val; - - if (!of_property_read_u32(np, "lan8814,latency_rx_10", &val)) - latency->rx_10 = val; - if (!of_property_read_u32(np, "lan8814,latency_tx_10", &val)) - latency->tx_10 = val; - if (!of_property_read_u32(np, "lan8814,latency_rx_100", &val)) - latency->rx_100 = val; - if (!of_property_read_u32(np, "lan8814,latency_tx_100", &val)) - latency->tx_100 = val; - if (!of_property_read_u32(np, "lan8814,latency_rx_1000", &val)) - latency->rx_1000 = val; - if (!of_property_read_u32(np, "lan8814,latency_tx_1000", &val)) - latency->tx_1000 = val; -} - static int lan8814_probe(struct phy_device *phydev) { const struct device_node *np = phydev->mdio.dev.of_node; @@ -2724,8 +2627,6 @@ static int lan8814_probe(struct phy_device *phydev) priv->led_mode = -1; - priv->latencies = lan8814_latencies; - phydev->priv = priv; if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) || @@ -2746,7 +2647,6 @@ static int lan8814_probe(struct phy_device *phydev) return err; } - lan8814_parse_latency(phydev); lan8814_ptp_init(phydev); return 0; @@ -2928,7 +2828,7 @@ static struct phy_driver ksphy_driver[] = { .config_init = lan8814_config_init, .probe = lan8814_probe, .soft_reset = genphy_soft_reset, - .read_status = lan8814_read_status, + .read_status = ksz9031_read_status, .get_sset_count = kszphy_get_sset_count, .get_strings = kszphy_get_strings, .get_stats = kszphy_get_stats, |