Merge branch 'lantiq-Minor-fixes-for-vrx200-and-gswip'

Hauke Mehrtens says:

====================
net: lantiq: Minor fixes for vrx200 and gswip

These are mostly minor fixes to problems addresses in the latests round
of the review of the original series adding these driver, which were not
applied before the patches got merged into net-next.
In addition it fixes a data bus error on poweroff.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 45 insertions, 39 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index a089f5856778..886cbe8ffb38 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -22,9 +22,9 @@ required and optional properties.
 
 
 Required properties for GPHY firmware loading:
-- compatible	: "lantiq,gphy-fw" and "lantiq,xrx200-gphy-fw",
-		  "lantiq,xrx200a1x-gphy-fw", "lantiq,xrx200a2x-gphy-fw",
-		  "lantiq,xrx300-gphy-fw", or "lantiq,xrx330-gphy-fw"
+- compatible	: "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
+		  "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
+		  "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
 		  for the loading of the firmware into the embedded
 		  GPHY core of the SoC.
 - lantiq,rcu	: reference to the rcu syscon
@@ -41,13 +41,13 @@ Example:
 
 Ethernet switch on the VRX200 SoC:
 
-gswip: gswip@E108000 {
+switch@e108000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "lantiq,xrx200-gswip";
-	reg = <	0xE108000 0x3000 /* switch */
-		0xE10B100 0x70 /* mdio */
-		0xE10B1D8 0x30 /* mii */
+	reg = <	0xe108000 0x3100	/* switch */
+		0xe10b100 0xd8		/* mdio */
+		0xe10b1d8 0x130		/* mii */
 		>;
 	dsa,member = <0 0>;
 
@@ -97,7 +97,7 @@ gswip: gswip@E108000 {
 		};
 	};
 
-	mdio@0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "lantiq,xrx200-mdio";
@@ -123,6 +123,8 @@ gswip: gswip@E108000 {
 	gphy-fw {
 		compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
 		lantiq,rcu = <&rcu0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		gphy@20 {
 			reg = <0x20>;
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
index 8a2fe5200cdc..5ff5e68bbbb6 100644
--- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
@@ -11,11 +11,11 @@ Required properties:
 
 Example:
 
-eth0: eth@E10B308 {
+ethernet@e10b308 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "lantiq,xrx200-net";
-	reg = <0xE10B308 0x30>;
+	reg = <0xe10b308 0xcf8>;
 	interrupts = <73>, <72>;
 	interrupt-names = "tx", "rx";
 };
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index be1e69911a55..693a67f45bef 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -615,32 +615,24 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
 		if (!phy_interface_mode_is_rgmii(state->interface) &&
 		    state->interface != PHY_INTERFACE_MODE_MII &&
 		    state->interface != PHY_INTERFACE_MODE_REVMII &&
-		    state->interface != PHY_INTERFACE_MODE_RMII) {
-			bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-			dev_err(ds->dev,
-			"Unsupported interface: %d\n", state->interface);
-			return;
-		}
+		    state->interface != PHY_INTERFACE_MODE_RMII)
+			goto unsupported;
 		break;
 	case 2:
 	case 3:
 	case 4:
-		if (state->interface != PHY_INTERFACE_MODE_INTERNAL) {
-			bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-			dev_err(ds->dev,
-			"Unsupported interface: %d\n", state->interface);
-			return;
-		}
+		if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+			goto unsupported;
 		break;
 	case 5:
 		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_INTERNAL) {
-			bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-			dev_err(ds->dev,
-			"Unsupported interface: %d\n", state->interface);
-			return;
-		}
+		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
+			goto unsupported;
 		break;
+	default:
+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+		dev_err(ds->dev, "Unsupported port: %i\n", port);
+		return;
 	}
 
 	/* Allow all the expected bits */
@@ -667,6 +659,12 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
 	bitmap_and(state->advertising, state->advertising, mask,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	return;
+
+unsupported:
+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	dev_err(ds->dev, "Unsupported interface: %d\n", state->interface);
+	return;
 }
 
 static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -970,7 +968,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 	int err;
 	int i = 0;
 
-	/* The The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older
+	/* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older
 	 * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also
 	 * needs a different GPHY firmware.
 	 */
@@ -1097,7 +1095,7 @@ static int gswip_probe(struct platform_device *pdev)
 		dev_err(dev, "dsa switch register failed: %i\n", err);
 		goto mdio_bus;
 	}
-	if (priv->ds->dst->cpu_dp->index != priv->hw_info->cpu_port) {
+	if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
 		dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
 			priv->hw_info->cpu_port);
 		err = -EINVAL;
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 4a160761b3ff..8c5ba4b81fb7 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -115,12 +115,6 @@ static void xrx200_flush_dma(struct xrx200_chan *ch)
 static int xrx200_open(struct net_device *net_dev)
 {
 	struct xrx200_priv *priv = netdev_priv(net_dev);
-	int err;
-
-	/* enable clock gate */
-	err = clk_prepare_enable(priv->clk);
-	if (err)
-		return err;
 
 	napi_enable(&priv->chan_tx.napi);
 	ltq_dma_open(&priv->chan_tx.dma);
@@ -155,8 +149,6 @@ static int xrx200_close(struct net_device *net_dev)
 	napi_disable(&priv->chan_tx.napi);
 	ltq_dma_close(&priv->chan_tx.dma);
 
-	clk_disable_unprepare(priv->clk);
-
 	return 0;
 }
 
@@ -497,6 +489,11 @@ static int xrx200_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	/* enable clock gate */
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		goto err_uninit_dma;
+
 	/* set IPG to 12 */
 	xrx200_pmac_mask(priv, PMAC_RX_IPG_MASK, 0xb, PMAC_RX_IPG);
 
@@ -514,9 +511,12 @@ static int xrx200_probe(struct platform_device *pdev)
 
 	err = register_netdev(net_dev);
 	if (err)
-		goto err_uninit_dma;
+		goto err_unprepare_clk;
 	return err;
 
+err_unprepare_clk:
+	clk_disable_unprepare(priv->clk);
+
 err_uninit_dma:
 	xrx200_hw_cleanup(priv);
 
@@ -536,6 +536,9 @@ static int xrx200_remove(struct platform_device *pdev)
 	/* remove the actual device */
 	unregister_netdev(net_dev);
 
+	/* release the clock */
+	clk_disable_unprepare(priv->clk);
+
 	/* shut down hardware */
 	xrx200_hw_cleanup(priv);
 
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 5f73e96cc9e6..a69c1790bbfc 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -88,6 +88,9 @@ const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops)
 #ifdef CONFIG_NET_DSA_TAG_EDSA
 		[DSA_TAG_PROTO_EDSA] = "edsa",
 #endif
+#ifdef CONFIG_NET_DSA_TAG_GSWIP
+		[DSA_TAG_PROTO_GSWIP] = "gswip",
+#endif
 #ifdef CONFIG_NET_DSA_TAG_KSZ
 		[DSA_TAG_PROTO_KSZ] = "ksz",
 #endif