diff options
author | Jon Ringle <jringle@gridpoint.com> | 2015-10-06 22:37:46 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2015-10-08 13:49:55 +0200 |
commit | d70e53262f5cfc0b88a211ef9cbd1ca5256f4a6b (patch) | |
tree | f617ca5dba505ee3b84d5bde7b1a7ad3cfcf6892 | |
parent | Merge branch 'broadcom-iproc' (diff) | |
download | linux-d70e53262f5cfc0b88a211ef9cbd1ca5256f4a6b.tar.xz linux-d70e53262f5cfc0b88a211ef9cbd1ca5256f4a6b.zip |
net: Microchip encx24j600 driver
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet
controller over a SPI bus interface. This driver makes use of the regmap API to
optimize access to registers by caching registers where possible.
Datasheet:
http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/ethernet/microchip/Kconfig | 9 | ||||
-rw-r--r-- | drivers/net/ethernet/microchip/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/microchip/encx24j600-regmap.c | 513 | ||||
-rw-r--r-- | drivers/net/ethernet/microchip/encx24j600.c | 1127 | ||||
-rw-r--r-- | drivers/net/ethernet/microchip/encx24j600_hw.h | 437 |
5 files changed, 2087 insertions, 0 deletions
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig index 3fd8ca6d4e7c..992b01462a8f 100644 --- a/drivers/net/ethernet/microchip/Kconfig +++ b/drivers/net/ethernet/microchip/Kconfig @@ -33,4 +33,13 @@ config ENC28J60_WRITEVERIFY Enable the verify after the buffer write useful for debugging purpose. If unsure, say N. +config ENCX24J600 + tristate "ENCX24J600 support" + depends on SPI + ---help--- + Support for the Microchip ENC424J600 ethernet chip. + + To compile this driver as a module, choose M here. The module will be + called enc424j600. + endif # NET_VENDOR_MICROCHIP diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile index 573d4292b9ea..ff78f621b59a 100644 --- a/drivers/net/ethernet/microchip/Makefile +++ b/drivers/net/ethernet/microchip/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_ENC28J60) += enc28j60.o +obj-$(CONFIG_ENCX24J600) += encx24j600.o encx24j600-regmap.o diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c new file mode 100644 index 000000000000..f3bb9055a292 --- /dev/null +++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c @@ -0,0 +1,513 @@ +/** + * Register map access API - ENCX24J600 support + * + * Copyright 2015 Gridpoint + * + * Author: Jon Ringle <jringle@gridpoint.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "encx24j600_hw.h" + +static inline bool is_bits_set(int value, int mask) +{ + return (value & mask) == mask; +} + +static int encx24j600_switch_bank(struct encx24j600_context *ctx, + int bank) +{ + int ret = 0; + + int bank_opcode = BANK_SELECT(bank); + ret = spi_write(ctx->spi, &bank_opcode, 1); + if (ret == 0) + ctx->bank = bank; + + return ret; +} + +static int encx24j600_cmdn(struct encx24j600_context *ctx, u8 opcode, + const void *buf, size_t len) +{ + struct spi_message m; + struct spi_transfer t[2] = { { .tx_buf = &opcode, .len = 1, }, + { .tx_buf = buf, .len = len }, }; + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + return spi_sync(ctx->spi, &m); +} + +static void regmap_lock_mutex(void *context) +{ + struct encx24j600_context *ctx = context; + mutex_lock(&ctx->mutex); +} + +static void regmap_unlock_mutex(void *context) +{ + struct encx24j600_context *ctx = context; + mutex_unlock(&ctx->mutex); +} + +static int regmap_encx24j600_sfr_read(void *context, u8 reg, u8 *val, + size_t len) +{ + struct encx24j600_context *ctx = context; + u8 banked_reg = reg & ADDR_MASK; + u8 bank = ((reg & BANK_MASK) >> BANK_SHIFT); + u8 cmd = RCRU; + int ret = 0; + int i = 0; + u8 tx_buf[2]; + + if (reg < 0x80) { + cmd = RCRCODE | banked_reg; + if ((banked_reg < 0x16) && (ctx->bank != bank)) + ret = encx24j600_switch_bank(ctx, bank); + if (unlikely(ret)) + return ret; + } else { + /* Translate registers that are more effecient using + * 3-byte SPI commands + */ + switch (reg) { + case EGPRDPT: + cmd = RGPRDPT; break; + case EGPWRPT: + cmd = RGPWRPT; break; + case ERXRDPT: + cmd = RRXRDPT; break; + case ERXWRPT: + cmd = RRXWRPT; break; + case EUDARDPT: + cmd = RUDARDPT; break; + case EUDAWRPT: + cmd = RUDAWRPT; break; + case EGPDATA: + case ERXDATA: + case EUDADATA: + default: + return -EINVAL; + } + } + + tx_buf[i++] = cmd; + if (cmd == RCRU) + tx_buf[i++] = reg; + + ret = spi_write_then_read(ctx->spi, tx_buf, i, val, len); + + return ret; +} + +static int regmap_encx24j600_sfr_update(struct encx24j600_context *ctx, + u8 reg, u8 *val, size_t len, + u8 unbanked_cmd, u8 banked_code) +{ + u8 banked_reg = reg & ADDR_MASK; + u8 bank = ((reg & BANK_MASK) >> BANK_SHIFT); + u8 cmd = unbanked_cmd; + struct spi_message m; + struct spi_transfer t[3] = { { .tx_buf = &cmd, .len = sizeof(cmd), }, + { .tx_buf = ®, .len = sizeof(reg), }, + { .tx_buf = val, .len = len }, }; + + if (reg < 0x80) { + int ret = 0; + cmd = banked_code | banked_reg; + if ((banked_reg < 0x16) && (ctx->bank != bank)) + ret = encx24j600_switch_bank(ctx, bank); + if (unlikely(ret)) + return ret; + } else { + /* Translate registers that are more effecient using + * 3-byte SPI commands + */ + switch (reg) { + case EGPRDPT: + cmd = WGPRDPT; break; + case EGPWRPT: + cmd = WGPWRPT; break; + case ERXRDPT: + cmd = WRXRDPT; break; + case ERXWRPT: + cmd = WRXWRPT; break; + case EUDARDPT: + cmd = WUDARDPT; break; + case EUDAWRPT: + cmd = WUDAWRPT; break; + case EGPDATA: + case ERXDATA: + case EUDADATA: + default: + return -EINVAL; + } + } + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + + if (cmd == unbanked_cmd) { + t[1].tx_buf = ® + spi_message_add_tail(&t[1], &m); + } + + spi_message_add_tail(&t[2], &m); + return spi_sync(ctx->spi, &m); +} + +static int regmap_encx24j600_sfr_write(void *context, u8 reg, u8 *val, + size_t len) +{ + struct encx24j600_context *ctx = context; + return regmap_encx24j600_sfr_update(ctx, reg, val, len, WCRU, WCRCODE); +} + +static int regmap_encx24j600_sfr_set_bits(struct encx24j600_context *ctx, + u8 reg, u8 val) +{ + return regmap_encx24j600_sfr_update(ctx, reg, &val, 1, BFSU, BFSCODE); +} + +static int regmap_encx24j600_sfr_clr_bits(struct encx24j600_context *ctx, + u8 reg, u8 val) +{ + return regmap_encx24j600_sfr_update(ctx, reg, &val, 1, BFCU, BFCCODE); +} + +static int regmap_encx24j600_reg_update_bits(void *context, unsigned int reg, + unsigned int mask, + unsigned int val) +{ + struct encx24j600_context *ctx = context; + + int ret = 0; + unsigned int set_mask = mask & val; + unsigned int clr_mask = mask & ~val; + + if ((reg >= 0x40 && reg < 0x6c) || reg >= 0x80) + return -EINVAL; + + if (set_mask & 0xff) + ret = regmap_encx24j600_sfr_set_bits(ctx, reg, set_mask); + + set_mask = (set_mask & 0xff00) >> 8; + + if ((set_mask & 0xff) && (ret == 0)) + ret = regmap_encx24j600_sfr_set_bits(ctx, reg + 1, set_mask); + + if ((clr_mask & 0xff) && (ret == 0)) + ret = regmap_encx24j600_sfr_clr_bits(ctx, reg, clr_mask); + + clr_mask = (clr_mask & 0xff00) >> 8; + + if ((clr_mask & 0xff) && (ret == 0)) + ret = regmap_encx24j600_sfr_clr_bits(ctx, reg + 1, clr_mask); + + return ret; +} + +int regmap_encx24j600_spi_write(void *context, u8 reg, const u8 *data, + size_t count) +{ + struct encx24j600_context *ctx = context; + + if (reg < 0xc0) + return encx24j600_cmdn(ctx, reg, data, count); + else + /* SPI 1-byte command. Ignore data */ + return spi_write(ctx->spi, ®, 1); +} +EXPORT_SYMBOL_GPL(regmap_encx24j600_spi_write); + +int regmap_encx24j600_spi_read(void *context, u8 reg, u8 *data, size_t count) +{ + struct encx24j600_context *ctx = context; + + if (reg == RBSEL && count > 1) + count = 1; + + return spi_write_then_read(ctx->spi, ®, sizeof(reg), data, count); +} +EXPORT_SYMBOL_GPL(regmap_encx24j600_spi_read); + +static int regmap_encx24j600_write(void *context, const void *data, + size_t len) +{ + u8 *dout = (u8 *)data; + u8 reg = dout[0]; + ++dout; + --len; + + if (reg > 0xa0) + return regmap_encx24j600_spi_write(context, reg, dout, len); + + if (len > 2) + return -EINVAL; + + return regmap_encx24j600_sfr_write(context, reg, dout, len); +} + +static int regmap_encx24j600_read(void *context, + const void *reg_buf, size_t reg_size, + void *val, size_t val_size) +{ + u8 reg = *(const u8 *)reg_buf; + + if (reg_size != 1) { + pr_err("%s: reg=%02x reg_size=%zu\n", __func__, reg, reg_size); + return -EINVAL; + } + + if (reg > 0xa0) + return regmap_encx24j600_spi_read(context, reg, val, val_size); + + if (val_size > 2) { + pr_err("%s: reg=%02x val_size=%zu\n", __func__, reg, val_size); + return -EINVAL; + } + + return regmap_encx24j600_sfr_read(context, reg, val, val_size); +} + +static bool encx24j600_regmap_readable(struct device *dev, unsigned int reg) +{ + if ((reg < 0x36) || + ((reg >= 0x40) && (reg < 0x4c)) || + ((reg >= 0x52) && (reg < 0x56)) || + ((reg >= 0x60) && (reg < 0x66)) || + ((reg >= 0x68) && (reg < 0x80)) || + ((reg >= 0x86) && (reg < 0x92)) || + (reg == 0xc8)) + return true; + else + return false; +} + +static bool encx24j600_regmap_writeable(struct device *dev, unsigned int reg) +{ + if ((reg < 0x12) || + ((reg >= 0x14) && (reg < 0x1a)) || + ((reg >= 0x1c) && (reg < 0x36)) || + ((reg >= 0x40) && (reg < 0x4c)) || + ((reg >= 0x52) && (reg < 0x56)) || + ((reg >= 0x60) && (reg < 0x68)) || + ((reg >= 0x6c) && (reg < 0x80)) || + ((reg >= 0x86) && (reg < 0x92)) || + ((reg >= 0xc0) && (reg < 0xc8)) || + ((reg >= 0xca) && (reg < 0xf0))) + return true; + else + return false; +} + +static bool encx24j600_regmap_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ERXHEAD: + case EDMACS: + case ETXSTAT: + case ETXWIRE: + case ECON1: /* Can be modified via single byte cmds */ + case ECON2: /* Can be modified via single byte cmds */ + case ESTAT: + case EIR: /* Can be modified via single byte cmds */ + case MIRD: + case MISTAT: + return true; + default: + break; + } + + return false; +} + +static bool encx24j600_regmap_precious(struct device *dev, unsigned int reg) +{ + /* single byte cmds are precious */ + if (((reg >= 0xc0) && (reg < 0xc8)) || + ((reg >= 0xca) && (reg < 0xf0))) + return true; + else + return false; +} + +static int regmap_encx24j600_phy_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct encx24j600_context *ctx = context; + int ret; + unsigned int mistat; + + reg = MIREGADR_VAL | (reg & PHREG_MASK); + ret = regmap_write(ctx->regmap, MIREGADR, reg); + if (unlikely(ret)) + goto err_out; + + ret = regmap_write(ctx->regmap, MICMD, MIIRD); + if (unlikely(ret)) + goto err_out; + + usleep_range(26, 100); + while ((ret = regmap_read(ctx->regmap, MISTAT, &mistat) != 0) && + (mistat & BUSY)) + cpu_relax(); + + if (unlikely(ret)) + goto err_out; + + ret = regmap_write(ctx->regmap, MICMD, 0); + if (unlikely(ret)) + goto err_out; + + ret = regmap_read(ctx->regmap, MIRD, val); + +err_out: + if (ret) + pr_err("%s: error %d reading reg %02x\n", __func__, ret, + reg & PHREG_MASK); + + return ret; +} + +static int regmap_encx24j600_phy_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct encx24j600_context *ctx = context; + int ret; + unsigned int mistat; + + reg = MIREGADR_VAL | (reg & PHREG_MASK); + ret = regmap_write(ctx->regmap, MIREGADR, reg); + if (unlikely(ret)) + goto err_out; + + ret = regmap_write(ctx->regmap, MIWR, val); + if (unlikely(ret)) + goto err_out; + + usleep_range(26, 100); + while ((ret = regmap_read(ctx->regmap, MISTAT, &mistat) != 0) && + (mistat & BUSY)) + cpu_relax(); + +err_out: + if (ret) + pr_err("%s: error %d writing reg %02x=%04x\n", __func__, ret, + reg & PHREG_MASK, val); + + return ret; +} + +static bool encx24j600_phymap_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case PHCON1: + case PHSTAT1: + case PHANA: + case PHANLPA: + case PHANE: + case PHCON2: + case PHSTAT2: + case PHSTAT3: + return true; + default: + return false; + } +} + +static bool encx24j600_phymap_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case PHCON1: + case PHCON2: + case PHANA: + return true; + case PHSTAT1: + case PHSTAT2: + case PHSTAT3: + case PHANLPA: + case PHANE: + default: + return false; + } +} + +static bool encx24j600_phymap_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case PHSTAT1: + case PHSTAT2: + case PHSTAT3: + case PHANLPA: + case PHANE: + case PHCON2: + return true; + default: + return false; + } +} + +static struct regmap_config regcfg = { + .name = "reg", + .reg_bits = 8, + .val_bits = 16, + .max_register = 0xee, + .reg_stride = 2, + .cache_type = REGCACHE_RBTREE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .readable_reg = encx24j600_regmap_readable, + .writeable_reg = encx24j600_regmap_writeable, + .volatile_reg = encx24j600_regmap_volatile, + .precious_reg = encx24j600_regmap_precious, + .lock = regmap_lock_mutex, + .unlock = regmap_unlock_mutex, +}; + +static struct regmap_bus regmap_encx24j600 = { + .write = regmap_encx24j600_write, + .read = regmap_encx24j600_read, + .reg_update_bits = regmap_encx24j600_reg_update_bits, +}; + +static struct regmap_config phycfg = { + .name = "phy", + .reg_bits = 8, + .val_bits = 16, + .max_register = 0x1f, + .cache_type = REGCACHE_RBTREE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .readable_reg = encx24j600_phymap_readable, + .writeable_reg = encx24j600_phymap_writeable, + .volatile_reg = encx24j600_phymap_volatile, +}; +static struct regmap_bus phymap_encx24j600 = { + .reg_write = regmap_encx24j600_phy_reg_write, + .reg_read = regmap_encx24j600_phy_reg_read, +}; + +void devm_regmap_init_encx24j600(struct device *dev, + struct encx24j600_context *ctx) +{ + mutex_init(&ctx->mutex); + regcfg.lock_arg = ctx; + ctx->regmap = devm_regmap_init(dev, ®map_encx24j600, ctx, ®cfg); + ctx->phymap = devm_regmap_init(dev, &phymap_encx24j600, ctx, &phycfg); +} +EXPORT_SYMBOL_GPL(devm_regmap_init_encx24j600); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/microchip/encx24j600.c b/drivers/net/ethernet/microchip/encx24j600.c new file mode 100644 index 000000000000..e1329d9c2acc --- /dev/null +++ b/drivers/net/ethernet/microchip/encx24j600.c @@ -0,0 +1,1127 @@ +/** + * Microchip ENCX24J600 ethernet driver + * + * Copyright (C) 2015 Gridpoint + * Author: Jon Ringle <jringle@gridpoint.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/regmap.h> +#include <linux/skbuff.h> +#include <linux/spi/spi.h> + +#include "encx24j600_hw.h" + +#define DRV_NAME "encx24j600" +#define DRV_VERSION "1.0" + +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +/* SRAM memory layout: + * + * 0x0000-0x05ff TX buffers 1.5KB (1*1536) reside in the GP area in SRAM + * 0x0600-0x5fff RX buffers 22.5KB (15*1536) reside in the RX area in SRAM + */ +#define ENC_TX_BUF_START 0x0000U +#define ENC_RX_BUF_START 0x0600U +#define ENC_RX_BUF_END 0x5fffU +#define ENC_SRAM_SIZE 0x6000U + +enum { + RXFILTER_NORMAL, + RXFILTER_MULTI, + RXFILTER_PROMISC +}; + +struct encx24j600_priv { + struct net_device *ndev; + struct mutex lock; /* device access lock */ + struct encx24j600_context ctx; + struct sk_buff *tx_skb; + struct task_struct *kworker_task; + struct kthread_worker kworker; + struct kthread_work tx_work; + struct kthread_work setrx_work; + u16 next_packet; + bool hw_enabled; + bool full_duplex; + bool autoneg; + u16 speed; + int rxfilter; + u32 msg_enable; +}; + +static void dump_packet(const char *msg, int len, const char *data) +{ + pr_debug(DRV_NAME ": %s - packet len:%d\n", msg, len); + print_hex_dump_bytes("pk data: ", DUMP_PREFIX_OFFSET, data, len); +} + +static void encx24j600_dump_rsv(struct encx24j600_priv *priv, const char *msg, + struct rsv *rsv) +{ + struct net_device *dev = priv->ndev; + + netdev_info(dev, "RX packet Len:%d\n", rsv->len); + netdev_dbg(dev, "%s - NextPk: 0x%04x\n", msg, + rsv->next_packet); + netdev_dbg(dev, "RxOK: %d, DribbleNibble: %d\n", + RSV_GETBIT(rsv->rxstat, RSV_RXOK), + RSV_GETBIT(rsv->rxstat, RSV_DRIBBLENIBBLE)); + netdev_dbg(dev, "CRCErr:%d, LenChkErr: %d, LenOutOfRange: %d\n", + RSV_GETBIT(rsv->rxstat, RSV_CRCERROR), + RSV_GETBIT(rsv->rxstat, RSV_LENCHECKERR), + RSV_GETBIT(rsv->rxstat, RSV_LENOUTOFRANGE)); + netdev_dbg(dev, "Multicast: %d, Broadcast: %d, LongDropEvent: %d, CarrierEvent: %d\n", + RSV_GETBIT(rsv->rxstat, RSV_RXMULTICAST), + RSV_GETBIT(rsv->rxstat, RSV_RXBROADCAST), + RSV_GETBIT(rsv->rxstat, RSV_RXLONGEVDROPEV), + RSV_GETBIT(rsv->rxstat, RSV_CARRIEREV)); + netdev_dbg(dev, "ControlFrame: %d, PauseFrame: %d, UnknownOp: %d, VLanTagFrame: %d\n", + RSV_GETBIT(rsv->rxstat, RSV_RXCONTROLFRAME), + RSV_GETBIT(rsv->rxstat, RSV_RXPAUSEFRAME), + RSV_GETBIT(rsv->rxstat, RSV_RXUNKNOWNOPCODE), + RSV_GETBIT(rsv->rxstat, RSV_RXTYPEVLAN)); +} + +static u16 encx24j600_read_reg(struct encx24j600_priv *priv, u8 reg) +{ + struct net_device *dev = priv->ndev; + unsigned int val = 0; + int ret = regmap_read(priv->ctx.regmap, reg, &val); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d reading reg %02x\n", + __func__, ret, reg); + return val; +} + +static void encx24j600_write_reg(struct encx24j600_priv *priv, u8 reg, u16 val) +{ + struct net_device *dev = priv->ndev; + int ret = regmap_write(priv->ctx.regmap, reg, val); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d writing reg %02x=%04x\n", + __func__, ret, reg, val); +} + +static void encx24j600_update_reg(struct encx24j600_priv *priv, u8 reg, + u16 mask, u16 val) +{ + struct net_device *dev = priv->ndev; + int ret = regmap_update_bits(priv->ctx.regmap, reg, mask, val); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d updating reg %02x=%04x~%04x\n", + __func__, ret, reg, val, mask); +} + +static u16 encx24j600_read_phy(struct encx24j600_priv *priv, u8 reg) +{ + struct net_device *dev = priv->ndev; + unsigned int val = 0; + int ret = regmap_read(priv->ctx.phymap, reg, &val); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d reading %02x\n", + __func__, ret, reg); + return val; +} + +static void encx24j600_write_phy(struct encx24j600_priv *priv, u8 reg, u16 val) +{ + struct net_device *dev = priv->ndev; + int ret = regmap_write(priv->ctx.phymap, reg, val); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d writing reg %02x=%04x\n", + __func__, ret, reg, val); +} + +static void encx24j600_clr_bits(struct encx24j600_priv *priv, u8 reg, u16 mask) +{ + encx24j600_update_reg(priv, reg, mask, 0); +} + +static void encx24j600_set_bits(struct encx24j600_priv *priv, u8 reg, u16 mask) +{ + encx24j600_update_reg(priv, reg, mask, mask); +} + +static void encx24j600_cmd(struct encx24j600_priv *priv, u8 cmd) +{ + struct net_device *dev = priv->ndev; + int ret = regmap_write(priv->ctx.regmap, cmd, 0); + if (unlikely(ret)) + netif_err(priv, drv, dev, "%s: error %d with cmd %02x\n", + __func__, ret, cmd); +} + +static int encx24j600_raw_read(struct encx24j600_priv *priv, u8 reg, u8 *data, + size_t count) +{ + int ret; + mutex_lock(&priv->ctx.mutex); + ret = regmap_encx24j600_spi_read(&priv->ctx, reg, data, count); + mutex_unlock(&priv->ctx.mutex); + + return ret; +} + +static int encx24j600_raw_write(struct encx24j600_priv *priv, u8 reg, + const u8 *data, size_t count) +{ + int ret; + mutex_lock(&priv->ctx.mutex); + ret = regmap_encx24j600_spi_write(&priv->ctx, reg, data, count); + mutex_unlock(&priv->ctx.mutex); + + return ret; +} + +static void encx24j600_update_phcon1(struct encx24j600_priv *priv) +{ + u16 phcon1 = encx24j600_read_phy(priv, PHCON1); + if (priv->autoneg == AUTONEG_ENABLE) { + phcon1 |= ANEN | RENEG; + } else { + phcon1 &= ~ANEN; + if (priv->speed == SPEED_100) + phcon1 |= SPD100; + else + phcon1 &= ~SPD100; + + if (priv->full_duplex) + phcon1 |= PFULDPX; + else + phcon1 &= ~PFULDPX; + } + encx24j600_write_phy(priv, PHCON1, phcon1); +} + +/* Waits for autonegotiation to complete. */ +static int encx24j600_wait_for_autoneg(struct encx24j600_priv *priv) +{ + struct net_device *dev = priv->ndev; + unsigned long timeout = jiffies + msecs_to_jiffies(2000); + u16 phstat1; + u16 estat; + int ret = 0; + + phstat1 = encx24j600_read_phy(priv, PHSTAT1); + while ((phstat1 & ANDONE) == 0) { + if (time_after(jiffies, timeout)) { + u16 phstat3; + + netif_notice(priv, drv, dev, "timeout waiting for autoneg done\n"); + + priv->autoneg = AUTONEG_DISABLE; + phstat3 = encx24j600_read_phy(priv, PHSTAT3); + priv->speed = (phstat3 & PHY3SPD100) + ? SPEED_100 : SPEED_10; + priv->full_duplex = (phstat3 & PHY3DPX) ? 1 : 0; + encx24j600_update_phcon1(priv); + netif_notice(priv, drv, dev, "Using parallel detection: %s/%s", + priv->speed == SPEED_100 ? "100" : "10", + priv->full_duplex ? "Full" : "Half"); + + return -ETIMEDOUT; + } + cpu_relax(); + phstat1 = encx24j600_read_phy(priv, PHSTAT1); + } + + estat = encx24j600_read_reg(priv, ESTAT); + if (estat & PHYDPX) { + encx24j600_set_bits(priv, MACON2, FULDPX); + encx24j600_write_reg(priv, MABBIPG, 0x15); + } else { + encx24j600_clr_bits(priv, MACON2, FULDPX); + encx24j600_write_reg(priv, MABBIPG, 0x12); + /* Max retransmittions attempt */ + encx24j600_write_reg(priv, MACLCON, 0x370f); + } + + return ret; +} + +/* Access the PHY to determine link status */ +static void encx24j600_check_link_status(struct encx24j600_priv *priv) +{ + struct net_device *dev = priv->ndev; + u16 estat; + + estat = encx24j600_read_reg(priv, ESTAT); + + if (estat & PHYLNK) { + if (priv->autoneg == AUTONEG_ENABLE) + encx24j600_wait_for_autoneg(priv); + + netif_carrier_on(dev); + netif_info(priv, ifup, dev, "link up\n"); + } else { + netif_info(priv, ifdown, dev, "link down\n"); + + /* Re-enable autoneg since we won't know what we might be + * connected to when the link is brought back up again. + */ + priv->autoneg = AUTONEG_ENABLE; + priv->full_duplex = true; + priv->speed = SPEED_100; + netif_carrier_off(dev); + } +} + +static void encx24j600_int_link_handler(struct encx24j600_priv *priv) +{ + struct net_device *dev = priv->ndev; + + netif_dbg(priv, intr, dev, "%s", __func__); + encx24j600_check_link_status(priv); + encx24j600_clr_bits(priv, EIR, LINKIF); +} + +static void encx24j600_tx_complete(struct encx24j600_priv *priv, bool err) +{ + struct net_device *dev = priv->ndev; + + if (!priv->tx_skb) { + BUG(); + return; + } + + mutex_lock(&priv->lock); + + if (err) + dev->stats.tx_errors++; + else + dev->stats.tx_packets++; + + dev->stats.tx_bytes += priv->tx_skb->len; + + encx24j600_clr_bits(priv, EIR, TXIF | TXABTIF); + + netif_dbg(priv, tx_done, dev, "TX Done%s\n", err ? ": Err" : ""); + + dev_kfree_skb(priv->tx_skb); + priv->tx_skb = NULL; + + netif_wake_queue(dev); + + mutex_unlock(&priv->lock); +} + +static int encx24j600_receive_packet(struct encx24j600_priv *priv, + struct rsv *rsv) +{ + struct net_device *dev = priv->ndev; + struct sk_buff *skb = netdev_alloc_skb(dev, rsv->len + NET_IP_ALIGN); + if (!skb) { + pr_err_ratelimited("RX: OOM: packet dropped\n"); + dev->stats.rx_dropped++; + return -ENOMEM; + } + skb_reserve(skb, NET_IP_ALIGN); + encx24j600_raw_read(priv, RRXDATA, skb_put(skb, rsv->len), rsv->len); + + if (netif_msg_pktdata(priv)) + dump_packet("RX", skb->len, skb->data); + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_COMPLETE; + + /* Maintain stats */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += rsv->len; + priv->next_packet = rsv->next_packet; + + netif_rx(skb); + + return 0; +} + +static void encx24j600_rx_packets(struct encx24j600_priv *priv, u8 packet_count) +{ + struct net_device *dev = priv->ndev; + + while (packet_count--) { + struct rsv rsv; + u16 newrxtail; + + encx24j600_write_reg(priv, ERXRDPT, priv->next_packet); + encx24j600_raw_read(priv, RRXDATA, (u8 *)&rsv, sizeof(rsv)); + + if (netif_msg_rx_status(priv)) + encx24j600_dump_rsv(priv, __func__, &rsv); + + if (!RSV_GETBIT(rsv.rxstat, RSV_RXOK) || + (rsv.len > MAX_FRAMELEN)) { + netif_err(priv, rx_err, dev, "RX Error %04x\n", + rsv.rxstat); + dev->stats.rx_errors++; + + if (RSV_GETBIT(rsv.rxstat, RSV_CRCERROR)) + dev->stats.rx_crc_errors++; + if (RSV_GETBIT(rsv.rxstat, RSV_LENCHECKERR)) + dev->stats.rx_frame_errors++; + if (rsv.len > MAX_FRAMELEN) + dev->stats.rx_over_errors++; + } else { + encx24j600_receive_packet(priv, &rsv); + } + + newrxtail = priv->next_packet - 2; + if (newrxtail == ENC_RX_BUF_START) + newrxtail = SRAM_SIZE - 2; + + encx24j600_cmd(priv, SETPKTDEC); + encx24j600_write_reg(priv, ERXTAIL, newrxtail); + } +} + +static irqreturn_t encx24j600_isr(int irq, void *dev_id) +{ + struct encx24j600_priv *priv = dev_id; + struct net_device *dev = priv->ndev; + int eir; + + /* Clear interrupts */ + encx24j600_cmd(priv, CLREIE); + + eir = encx24j600_read_reg(priv, EIR); + + if (eir & LINKIF) + encx24j600_int_link_handler(priv); + + if (eir & TXIF) + encx24j600_tx_complete(priv, false); + + if (eir & TXABTIF) + encx24j600_tx_complete(priv, true); + + if (eir & RXABTIF) { + if (eir & PCFULIF) { + /* Packet counter is full */ + netif_err(priv, rx_err, dev, "Packet counter full\n"); + } + dev->stats.rx_dropped++; + encx24j600_clr_bits(priv, EIR, RXABTIF); + } + + if (eir & PKTIF) { + u8 packet_count; + + mutex_lock(&priv->lock); + + packet_count = encx24j600_read_reg(priv, ESTAT) & 0xff; + while (packet_count) { + encx24j600_rx_packets(priv, packet_count); + packet_count = encx24j600_read_reg(priv, ESTAT) & 0xff; + } + + mutex_unlock(&priv->lock); + } + + /* Enable interrupts */ + encx24j600_cmd(priv, SETEIE); + + return IRQ_HANDLED; +} + +static int encx24j600_soft_reset(struct encx24j600_priv *priv) +{ + int ret = 0; + int timeout; + u16 eudast; + + /* Write and verify a test value to EUDAST */ + regcache_cache_bypass(priv->ctx.regmap, true); + timeout = 10; + do { + encx24j600_write_reg(priv, EUDAST, EUDAST_TEST_VAL); + eudast = encx24j600_read_reg(priv, EUDAST); + usleep_range(25, 100); + } while ((eudast != EUDAST_TEST_VAL) && --timeout); + regcache_cache_bypass(priv->ctx.regmap, false); + + if (timeout == 0) { + ret = -ETIMEDOUT; + goto err_out; + } + + /* Wait for CLKRDY to become set */ + timeout = 10; + while (!(encx24j600_read_reg(priv, ESTAT) & CLKRDY) && --timeout) + usleep_range(25, 100); + + if (timeout == 0) { + ret = -ETIMEDOUT; + goto err_out; + } + + /* Issue a System Reset command */ + encx24j600_cmd(priv, SETETHRST); + usleep_range(25, 100); + + /* Confirm that EUDAST has 0000h after system reset */ + if (encx24j600_read_reg(priv, EUDAST) != 0) { + ret = -EINVAL; + goto err_out; + } + + /* Wait for PHY register and status bits to become available */ + usleep_range(256, 1000); + +err_out: + return ret; +} + +static int encx24j600_hw_reset(struct encx24j600_priv *priv) +{ + int ret; + + mutex_lock(&priv->lock); + ret = encx24j600_soft_reset(priv); + mutex_unlock(&priv->lock); + + return ret; +} + +static void encx24j600_reset_hw_tx(struct encx24j600_priv *priv) +{ + encx24j600_set_bits(priv, ECON2, TXRST); + encx24j600_clr_bits(priv, ECON2, TXRST); +} + +static void encx24j600_hw_init_tx(struct encx24j600_priv *priv) +{ + /* Reset TX */ + encx24j600_reset_hw_tx(priv); + + /* Clear the TXIF flag if were previously set */ + encx24j600_clr_bits(priv, EIR, TXIF | TXABTIF); + + /* Write the Tx Buffer pointer */ + encx24j600_write_reg(priv, EGPWRPT, ENC_TX_BUF_START); +} + +static void encx24j600_hw_init_rx(struct encx24j600_priv *priv) +{ + encx24j600_cmd(priv, DISABLERX); + + /* Set up RX packet start address in the SRAM */ + encx24j600_write_reg(priv, ERXST, ENC_RX_BUF_START); + + /* Preload the RX Data pointer to the beginning of the RX area */ + encx24j600_write_reg(priv, ERXRDPT, ENC_RX_BUF_START); + + priv->next_packet = ENC_RX_BUF_START; + + /* Set up RX end address in the SRAM */ + encx24j600_write_reg(priv, ERXTAIL, ENC_SRAM_SIZE - 2); + + /* Reset the user data pointers */ + encx24j600_write_reg(priv, EUDAST, ENC_SRAM_SIZE); + encx24j600_write_reg(priv, EUDAND, ENC_SRAM_SIZE + 1); + + /* Set Max Frame length */ + encx24j600_write_reg(priv, MAMXFL, MAX_FRAMELEN); +} + +static void encx24j600_dump_config(struct encx24j600_priv *priv, + const char *msg) +{ + pr_info(DRV_NAME ": %s\n", msg); + + /* CHIP configuration */ + pr_info(DRV_NAME " ECON1: %04X\n", encx24j600_read_reg(priv, ECON1)); + pr_info(DRV_NAME " ECON2: %04X\n", encx24j600_read_reg(priv, ECON2)); + pr_info(DRV_NAME " ERXFCON: %04X\n", encx24j600_read_reg(priv, + ERXFCON)); + pr_info(DRV_NAME " ESTAT: %04X\n", encx24j600_read_reg(priv, ESTAT)); + pr_info(DRV_NAME " EIR: %04X\n", encx24j600_read_reg(priv, EIR)); + pr_info(DRV_NAME " EIDLED: %04X\n", encx24j600_read_reg(priv, EIDLED)); + + /* MAC layer configuration */ + pr_info(DRV_NAME " MACON1: %04X\n", encx24j600_read_reg(priv, MACON1)); + pr_info(DRV_NAME " MACON2: %04X\n", encx24j600_read_reg(priv, MACON2)); + pr_info(DRV_NAME " MAIPG: %04X\n", encx24j600_read_reg(priv, MAIPG)); + pr_info(DRV_NAME " MACLCON: %04X\n", encx24j600_read_reg(priv, + MACLCON)); + pr_info(DRV_NAME " MABBIPG: %04X\n", encx24j600_read_reg(priv, + MABBIPG)); + + /* PHY configuation */ + pr_info(DRV_NAME " PHCON1: %04X\n", encx24j600_read_phy(priv, PHCON1)); + pr_info(DRV_NAME " PHCON2: %04X\n", encx24j600_read_phy(priv, PHCON2)); + pr_info(DRV_NAME " PHANA: %04X\n", encx24j600_read_phy(priv, PHANA)); + pr_info(DRV_NAME " PHANLPA: %04X\n", encx24j600_read_phy(priv, + PHANLPA)); + pr_info(DRV_NAME " PHANE: %04X\n", encx24j600_read_phy(priv, PHANE)); + pr_info(DRV_NAME " PHSTAT1: %04X\n", encx24j600_read_phy(priv, + PHSTAT1)); + pr_info(DRV_NAME " PHSTAT2: %04X\n", encx24j600_read_phy(priv, + PHSTAT2)); + pr_info(DRV_NAME " PHSTAT3: %04X\n", encx24j600_read_phy(priv, + PHSTAT3)); +} + +static void encx24j600_set_rxfilter_mode(struct encx24j600_priv *priv) +{ + switch (priv->rxfilter) { + case RXFILTER_PROMISC: + encx24j600_set_bits(priv, MACON1, PASSALL); + encx24j600_write_reg(priv, ERXFCON, UCEN | MCEN | NOTMEEN); + break; + case RXFILTER_MULTI: + encx24j600_clr_bits(priv, MACON1, PASSALL); + encx24j600_write_reg(priv, ERXFCON, UCEN | CRCEN | BCEN | MCEN); + break; + case RXFILTER_NORMAL: + default: + encx24j600_clr_bits(priv, MACON1, PASSALL); + encx24j600_write_reg(priv, ERXFCON, UCEN | CRCEN | BCEN); + break; + } +} + +static int encx24j600_hw_init(struct encx24j600_priv *priv) +{ + struct net_device *dev = priv->ndev; + int ret = 0; + u16 eidled; + u16 macon2; + + priv->hw_enabled = false; + + eidled = encx24j600_read_reg(priv, EIDLED); + if (((eidled & DEVID_MASK) >> DEVID_SHIFT) != ENCX24J600_DEV_ID) { + ret = -EINVAL; + goto err_out; + } + + netif_info(priv, drv, dev, "Silicon rev ID: 0x%02x\n", + (eidled & REVID_MASK) >> REVID_SHIFT); + + /* PHY Leds: link status, + * LEDA: Link + transmit/receive events + * LEDB: Link State + colision events + */ + encx24j600_update_reg(priv, EIDLED, 0xbc00, 0xbc00); + + /* Loopback disabled */ + encx24j600_write_reg(priv, MACON1, 0x9); + + /* interpacket gap value */ + encx24j600_write_reg(priv, MAIPG, 0x0c12); + + /* Write the auto negotiation pattern */ + encx24j600_write_phy(priv, PHANA, PHANA_DEFAULT); + + encx24j600_update_phcon1(priv); + encx24j600_check_link_status(priv); + + macon2 = MACON2_RSV1 | TXCRCEN | PADCFG0 | PADCFG2 | MACON2_DEFER; + if ((priv->autoneg == AUTONEG_DISABLE) && priv->full_duplex) + macon2 |= FULDPX; + + encx24j600_set_bits(priv, MACON2, macon2); + + priv->rxfilter = RXFILTER_NORMAL; + encx24j600_set_rxfilter_mode(priv); + + /* Program the Maximum frame length */ + encx24j600_write_reg(priv, MAMXFL, MAX_FRAMELEN); + + /* Init Tx pointers */ + encx24j600_hw_init_tx(priv); + + /* Init Rx pointers */ + encx24j600_hw_init_rx(priv); + + if (netif_msg_hw(priv)) + encx24j600_dump_config(priv, "Hw is initialized"); + +err_out: + return ret; +} + +static void encx24j600_hw_enable(struct encx24j600_priv *priv) +{ + /* Clear the interrupt flags in case was set */ + encx24j600_clr_bits(priv, EIR, (PCFULIF | RXABTIF | TXABTIF | TXIF | + PKTIF | LINKIF)); + + /* Enable the interrupts */ + encx24j600_write_reg(priv, EIE, (PCFULIE | RXABTIE | TXABTIE | TXIE | + PKTIE | LINKIE | INTIE)); + + /* Enable RX */ + encx24j600_cmd(priv, ENABLERX); + + priv->hw_enabled = true; +} + +static void encx24j600_hw_disable(struct encx24j600_priv *priv) +{ + /* Disable all interrupts */ + encx24j600_write_reg(priv, EIE, 0); + + /* Disable RX */ + encx24j600_cmd(priv, DISABLERX); + + priv->hw_enabled = false; +} + +static int encx24j600_setlink(struct net_device *dev, u8 autoneg, u16 speed, + u8 duplex) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + int ret = 0; + + if (!priv->hw_enabled) { + /* link is in low power mode now; duplex setting + * will take effect on next encx24j600_hw_init() + */ + if (speed == SPEED_10 || speed == SPEED_100) { + priv->autoneg = (autoneg == AUTONEG_ENABLE); + priv->full_duplex = (duplex == DUPLEX_FULL); + priv->speed = (speed == SPEED_100); + } else { + netif_warn(priv, link, dev, "unsupported link speed setting\n"); + /*speeds other than SPEED_10 and SPEED_100 */ + /*are not supported by chip */ + ret = -EOPNOTSUPP; + } + } else { + netif_warn(priv, link, dev, "Warning: hw must be disabled to set link mode\n"); + ret = -EBUSY; + } + return ret; +} + +static void encx24j600_hw_get_macaddr(struct encx24j600_priv *priv, + unsigned char *ethaddr) +{ + unsigned short val; + + val = encx24j600_read_reg(priv, MAADR1); + + ethaddr[0] = val & 0x00ff; + ethaddr[1] = (val & 0xff00) >> 8; + + val = encx24j600_read_reg(priv, MAADR2); + + ethaddr[2] = val & 0x00ffU; + ethaddr[3] = (val & 0xff00U) >> 8; + + val = encx24j600_read_reg(priv, MAADR3); + + ethaddr[4] = val & 0x00ffU; + ethaddr[5] = (val & 0xff00U) >> 8; +} + +/* Program the hardware MAC address from dev->dev_addr.*/ +static int encx24j600_set_hw_macaddr(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + if (priv->hw_enabled) { + netif_info(priv, drv, dev, "Hardware must be disabled to set Mac address\n"); + return -EBUSY; + } + + mutex_lock(&priv->lock); + + netif_info(priv, drv, dev, "%s: Setting MAC address to %pM\n", + dev->name, dev->dev_addr); + + encx24j600_write_reg(priv, MAADR3, (dev->dev_addr[4] | + dev->dev_addr[5] << 8)); + encx24j600_write_reg(priv, MAADR2, (dev->dev_addr[2] | + dev->dev_addr[3] << 8)); + encx24j600_write_reg(priv, MAADR1, (dev->dev_addr[0] | + dev->dev_addr[1] << 8)); + + mutex_unlock(&priv->lock); + + return 0; +} + +/* Store the new hardware address in dev->dev_addr, and update the MAC.*/ +static int encx24j600_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *address = addr; + + if (netif_running(dev)) + return -EBUSY; + if (!is_valid_ether_addr(address->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, address->sa_data, dev->addr_len); + return encx24j600_set_hw_macaddr(dev); +} + +static int encx24j600_open(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + int ret = request_threaded_irq(priv->ctx.spi->irq, NULL, encx24j600_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + DRV_NAME, priv); + if (unlikely(ret < 0)) { + netdev_err(dev, "request irq %d failed (ret = %d)\n", + priv->ctx.spi->irq, ret); + return ret; + } + + encx24j600_hw_disable(priv); + encx24j600_hw_init(priv); + encx24j600_hw_enable(priv); + netif_start_queue(dev); + + return 0; +} + +static int encx24j600_stop(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + netif_stop_queue(dev); + free_irq(priv->ctx.spi->irq, priv); + return 0; +} + +static void encx24j600_setrx_proc(struct kthread_work *ws) +{ + struct encx24j600_priv *priv = + container_of(ws, struct encx24j600_priv, setrx_work); + + mutex_lock(&priv->lock); + encx24j600_set_rxfilter_mode(priv); + mutex_unlock(&priv->lock); +} + +static void encx24j600_set_multicast_list(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + int oldfilter = priv->rxfilter; + + if (dev->flags & IFF_PROMISC) { + netif_dbg(priv, link, dev, "promiscuous mode\n"); + priv->rxfilter = RXFILTER_PROMISC; + } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) { + netif_dbg(priv, link, dev, "%smulticast mode\n", + (dev->flags & IFF_ALLMULTI) ? "all-" : ""); + priv->rxfilter = RXFILTER_MULTI; + } else { + netif_dbg(priv, link, dev, "normal mode\n"); + priv->rxfilter = RXFILTER_NORMAL; + } + + if (oldfilter != priv->rxfilter) + queue_kthread_work(&priv->kworker, &priv->setrx_work); +} + +static void encx24j600_hw_tx(struct encx24j600_priv *priv) +{ + struct net_device *dev = priv->ndev; + netif_info(priv, tx_queued, dev, "TX Packet Len:%d\n", + priv->tx_skb->len); + + if (netif_msg_pktdata(priv)) + dump_packet("TX", priv->tx_skb->len, priv->tx_skb->data); + + if (encx24j600_read_reg(priv, EIR) & TXABTIF) + /* Last transmition aborted due to error. Reset TX interface */ + encx24j600_reset_hw_tx(priv); + + /* Clear the TXIF flag if were previously set */ + encx24j600_clr_bits(priv, EIR, TXIF); + + /* Set the data pointer to the TX buffer address in the SRAM */ + encx24j600_write_reg(priv, EGPWRPT, ENC_TX_BUF_START); + + /* Copy the packet into the SRAM */ + encx24j600_raw_write(priv, WGPDATA, (u8 *)priv->tx_skb->data, + priv->tx_skb->len); + + /* Program the Tx buffer start pointer */ + encx24j600_write_reg(priv, ETXST, ENC_TX_BUF_START); + + /* Program the packet length */ + encx24j600_write_reg(priv, ETXLEN, priv->tx_skb->len); + + /* Start the transmission */ + encx24j600_cmd(priv, SETTXRTS); +} + +static void encx24j600_tx_proc(struct kthread_work *ws) +{ + struct encx24j600_priv *priv = + container_of(ws, struct encx24j600_priv, tx_work); + + mutex_lock(&priv->lock); + encx24j600_hw_tx(priv); + mutex_unlock(&priv->lock); +} + +static netdev_tx_t encx24j600_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + netif_stop_queue(dev); + + /* save the timestamp */ + dev->trans_start = jiffies; + + /* Remember the skb for deferred processing */ + priv->tx_skb = skb; + + queue_kthread_work(&priv->kworker, &priv->tx_work); + + return NETDEV_TX_OK; +} + +/* Deal with a transmit timeout */ +static void encx24j600_tx_timeout(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + netif_err(priv, tx_err, dev, "TX timeout at %ld, latency %ld\n", + jiffies, jiffies - dev->trans_start); + + dev->stats.tx_errors++; + netif_wake_queue(dev); + return; +} + +static int encx24j600_get_regs_len(struct net_device *dev) +{ + return SFR_REG_COUNT; +} + +static void encx24j600_get_regs(struct net_device *dev, + struct ethtool_regs *regs, void *p) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + u16 *buff = p; + u8 reg; + + regs->version = 1; + mutex_lock(&priv->lock); + for (reg = 0; reg < SFR_REG_COUNT; reg += 2) { + unsigned int val = 0; + /* ignore errors for unreadable registers */ + regmap_read(priv->ctx.regmap, reg, &val); + buff[reg] = val & 0xffff; + } + mutex_unlock(&priv->lock); +} + +static void encx24j600_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(dev->dev.parent), + sizeof(info->bus_info)); +} + +static int encx24j600_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + + cmd->transceiver = XCVR_INTERNAL; + cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_TP; + + ethtool_cmd_speed_set(cmd, priv->speed); + cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + cmd->port = PORT_TP; + cmd->autoneg = priv->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; + + return 0; +} + +static int encx24j600_set_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + return encx24j600_setlink(dev, cmd->autoneg, + ethtool_cmd_speed(cmd), cmd->duplex); +} + +static u32 encx24j600_get_msglevel(struct net_device *dev) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + return priv->msg_enable; +} + +static void encx24j600_set_msglevel(struct net_device *dev, u32 val) +{ + struct encx24j600_priv *priv = netdev_priv(dev); + priv->msg_enable = val; +} + +static const struct ethtool_ops encx24j600_ethtool_ops = { + .get_settings = encx24j600_get_settings, + .set_settings = encx24j600_set_settings, + .get_drvinfo = encx24j600_get_drvinfo, + .get_msglevel = encx24j600_get_msglevel, + .set_msglevel = encx24j600_set_msglevel, + .get_regs_len = encx24j600_get_regs_len, + .get_regs = encx24j600_get_regs, +}; + +static const struct net_device_ops encx24j600_netdev_ops = { + .ndo_open = encx24j600_open, + .ndo_stop = encx24j600_stop, + .ndo_start_xmit = encx24j600_tx, + .ndo_set_rx_mode = encx24j600_set_multicast_list, + .ndo_set_mac_address = encx24j600_set_mac_address, + .ndo_tx_timeout = encx24j600_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; + +static int encx24j600_spi_probe(struct spi_device *spi) +{ + int ret; + + struct net_device *ndev; + struct encx24j600_priv *priv; + + ndev = alloc_etherdev(sizeof(struct encx24j600_priv)); + + if (!ndev) { + ret = -ENOMEM; + goto error_out; + } + + priv = netdev_priv(ndev); + spi_set_drvdata(spi, priv); + dev_set_drvdata(&spi->dev, priv); + SET_NETDEV_DEV(ndev, &spi->dev); + + priv->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); + priv->ndev = ndev; + + /* Default configuration PHY configuration */ + priv->full_duplex = true; + priv->autoneg = AUTONEG_ENABLE; + priv->speed = SPEED_100; + + priv->ctx.spi = spi; + devm_regmap_init_encx24j600(&spi->dev, &priv->ctx); + ndev->irq = spi->irq; + ndev->netdev_ops = &encx24j600_netdev_ops; + + mutex_init(&priv->lock); + + /* Reset device and check if it is connected */ + if (encx24j600_hw_reset(priv)) { + netif_err(priv, probe, ndev, + DRV_NAME ": Chip is not detected\n"); + ret = -EIO; + goto out_free; + } + + /* Initialize the device HW to the consistent state */ + if (encx24j600_hw_init(priv)) { + netif_err(priv, probe, ndev, + DRV_NAME ": HW initialization error\n"); + ret = -EIO; + goto out_free; + } + + init_kthread_worker(&priv->kworker); + init_kthread_work(&priv->tx_work, encx24j600_tx_proc); + init_kthread_work(&priv->setrx_work, encx24j600_setrx_proc); + + priv->kworker_task = kthread_run(kthread_worker_fn, &priv->kworker, + "encx24j600"); + + if (IS_ERR(priv->kworker_task)) { + ret = PTR_ERR(priv->kworker_task); + goto out_free; + } + + /* Get the MAC address from the chip */ + encx24j600_hw_get_macaddr(priv, ndev->dev_addr); + + ndev->ethtool_ops = &encx24j600_ethtool_ops; + + ret = register_netdev(ndev); + if (unlikely(ret)) { + netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n", + ret); + goto out_free; + } + + netif_info(priv, drv, priv->ndev, "MAC address %pM\n", ndev->dev_addr); + + return ret; + +out_free: + free_netdev(ndev); + +error_out: + return ret; +} + +static int encx24j600_spi_remove(struct spi_device *spi) +{ + struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev); + + unregister_netdev(priv->ndev); + + free_netdev(priv->ndev); + + return 0; +} + +static const struct spi_device_id encx24j600_spi_id_table = { + .name = "encx24j600" +}; + +static struct spi_driver encx24j600_spi_net_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .bus = &spi_bus_type, + }, + .probe = encx24j600_spi_probe, + .remove = encx24j600_spi_remove, + .id_table = &encx24j600_spi_id_table, +}; + +static int __init encx24j600_init(void) +{ + return spi_register_driver(&encx24j600_spi_net_driver); +} +module_init(encx24j600_init); + +static void encx24j600_exit(void) +{ + spi_unregister_driver(&encx24j600_spi_net_driver); +} +module_exit(encx24j600_exit); + +MODULE_DESCRIPTION(DRV_NAME " ethernet driver"); +MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:" DRV_NAME); diff --git a/drivers/net/ethernet/microchip/encx24j600_hw.h b/drivers/net/ethernet/microchip/encx24j600_hw.h new file mode 100644 index 000000000000..4be73d5553f8 --- /dev/null +++ b/drivers/net/ethernet/microchip/encx24j600_hw.h @@ -0,0 +1,437 @@ +/** + * encx24j600_hw.h: Register definitions + * + */ + +#ifndef _ENCX24J600_HW_H +#define _ENCX24J600_HW_H + +struct encx24j600_context { + struct spi_device *spi; + struct regmap *regmap; + struct regmap *phymap; + struct mutex mutex; /* mutex to protect access to regmap */ + int bank; +}; + +void devm_regmap_init_encx24j600(struct device *dev, + struct encx24j600_context *ctx); + +/* Single-byte instructions */ +#define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1)) +#define B0SEL 0xC0 /* Bank 0 Select */ +#define B1SEL 0xC2 /* Bank 1 Select */ +#define B2SEL 0xC4 /* Bank 2 Select */ +#define B3SEL 0xC6 /* Bank 3 Select */ +#define SETETHRST 0xCA /* System Reset */ +#define FCDISABLE 0xE0 /* Flow Control Disable */ +#define FCSINGLE 0xE2 /* Flow Control Single */ +#define FCMULTIPLE 0xE4 /* Flow Control Multiple */ +#define FCCLEAR 0xE6 /* Flow Control Clear */ +#define SETPKTDEC 0xCC /* Decrement Packet Counter */ +#define DMASTOP 0xD2 /* DMA Stop */ +#define DMACKSUM 0xD8 /* DMA Start Checksum */ +#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */ +#define DMACOPY 0xDC /* DMA Start Copy */ +#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */ +#define SETTXRTS 0xD4 /* Request Packet Transmission */ +#define ENABLERX 0xE8 /* Enable RX */ +#define DISABLERX 0xEA /* Disable RX */ +#define SETEIE 0xEC /* Enable Interrupts */ +#define CLREIE 0xEE /* Disable Interrupts */ + +/* Two byte instructions */ +#define RBSEL 0xC8 /* Read Bank Select */ + +/* Three byte instructions */ +#define WGPRDPT 0x60 /* Write EGPRDPT */ +#define RGPRDPT 0x62 /* Read EGPRDPT */ +#define WRXRDPT 0x64 /* Write ERXRDPT */ +#define RRXRDPT 0x66 /* Read ERXRDPT */ +#define WUDARDPT 0x68 /* Write EUDARDPT */ +#define RUDARDPT 0x6A /* Read EUDARDPT */ +#define WGPWRPT 0x6C /* Write EGPWRPT */ +#define RGPWRPT 0x6E /* Read EGPWRPT */ +#define WRXWRPT 0x70 /* Write ERXWRPT */ +#define RRXWRPT 0x72 /* Read ERXWRPT */ +#define WUDAWRPT 0x74 /* Write EUDAWRPT */ +#define RUDAWRPT 0x76 /* Read EUDAWRPT */ + +/* n byte instructions */ +#define RCRCODE 0x00 +#define WCRCODE 0x40 +#define BFSCODE 0x80 +#define BFCCODE 0xA0 +#define RCR(addr) (RCRCODE | (addr & ADDR_MASK)) /* Read Control Register */ +#define WCR(addr) (WCRCODE | (addr & ADDR_MASK)) /* Write Control Register */ +#define RCRU 0x20 /* Read Control Register Unbanked */ +#define WCRU 0x22 /* Write Control Register Unbanked */ +#define BFS(addr) (BFSCODE | (addr & ADDR_MASK)) /* Bit Field Set */ +#define BFC(addr) (BFCCODE | (addr & ADDR_MASK)) /* Bit Field Clear */ +#define BFSU 0x24 /* Bit Field Set Unbanked */ +#define BFCU 0x26 /* Bit Field Clear Unbanked */ +#define RGPDATA 0x28 /* Read EGPDATA */ +#define WGPDATA 0x2A /* Write EGPDATA */ +#define RRXDATA 0x2C /* Read ERXDATA */ +#define WRXDATA 0x2E /* Write ERXDATA */ +#define RUDADATA 0x30 /* Read EUDADATA */ +#define WUDADATA 0x32 /* Write EUDADATA */ + +#define SFR_REG_COUNT 0xA0 + +/* ENC424J600 Control Registers + * Control register definitions are a combination of address + * and bank number + * - Register address (bits 0-4) + * - Bank number (bits 5-6) + */ +#define ADDR_MASK 0x1F +#define BANK_MASK 0x60 +#define BANK_SHIFT 5 + +/* All-bank registers */ +#define EUDAST 0x16 +#define EUDAND 0x18 +#define ESTAT 0x1A +#define EIR 0x1C +#define ECON1 0x1E + +/* Bank 0 registers */ +#define ETXST (0x00 | 0x00) +#define ETXLEN (0x02 | 0x00) +#define ERXST (0x04 | 0x00) +#define ERXTAIL (0x06 | 0x00) +#define ERXHEAD (0x08 | 0x00) +#define EDMAST (0x0A | 0x00) +#define EDMALEN (0x0C | 0x00) +#define EDMADST (0x0E | 0x00) +#define EDMACS (0x10 | 0x00) +#define ETXSTAT (0x12 | 0x00) +#define ETXWIRE (0x14 | 0x00) + +/* Bank 1 registers */ +#define EHT1 (0x00 | 0x20) +#define EHT2 (0x02 | 0x20) +#define EHT3 (0x04 | 0x20) +#define EHT4 (0x06 | 0x20) +#define EPMM1 (0x08 | 0x20) +#define EPMM2 (0x0A | 0x20) +#define EPMM3 (0x0C | 0x20) +#define EPMM4 (0x0E | 0x20) +#define EPMCS (0x10 | 0x20) +#define EPMO (0x12 | 0x20) +#define ERXFCON (0x14 | 0x20) + +/* Bank 2 registers */ +#define MACON1 (0x00 | 0x40) +#define MACON2 (0x02 | 0x40) +#define MABBIPG (0x04 | 0x40) +#define MAIPG (0x06 | 0x40) +#define MACLCON (0x08 | 0x40) +#define MAMXFL (0x0A | 0x40) +#define MICMD (0x12 | 0x40) +#define MIREGADR (0x14 | 0x40) + +/* Bank 3 registers */ +#define MAADR3 (0x00 | 0x60) +#define MAADR2 (0x02 | 0x60) +#define MAADR1 (0x04 | 0x60) +#define MIWR (0x06 | 0x60) +#define MIRD (0x08 | 0x60) +#define MISTAT (0x0A | 0x60) +#define EPAUS (0x0C | 0x60) +#define ECON2 (0x0E | 0x60) +#define ERXWM (0x10 | 0x60) +#define EIE (0x12 | 0x60) +#define EIDLED (0x14 | 0x60) + +/* Unbanked registers */ +#define EGPDATA (0x00 | 0x80) +#define ERXDATA (0x02 | 0x80) +#define EUDADATA (0x04 | 0x80) +#define EGPRDPT (0x06 | 0x80) +#define EGPWRPT (0x08 | 0x80) +#define ERXRDPT (0x0A | 0x80) +#define ERXWRPT (0x0C | 0x80) +#define EUDARDPT (0x0E | 0x80) +#define EUDAWRPT (0x10 | 0x80) + + +/* Register bit definitions */ +/* ESTAT */ +#define INT (1 << 15) +#define FCIDLE (1 << 14) +#define RXBUSY (1 << 13) +#define CLKRDY (1 << 12) +#define PHYDPX (1 << 10) +#define PHYLNK (1 << 8) + +/* EIR */ +#define CRYPTEN (1 << 15) +#define MODEXIF (1 << 14) +#define HASHIF (1 << 13) +#define AESIF (1 << 12) +#define LINKIF (1 << 11) +#define PKTIF (1 << 6) +#define DMAIF (1 << 5) +#define TXIF (1 << 3) +#define TXABTIF (1 << 2) +#define RXABTIF (1 << 1) +#define PCFULIF (1 << 0) + +/* ECON1 */ +#define MODEXST (1 << 15) +#define HASHEN (1 << 14) +#define HASHOP (1 << 13) +#define HASHLST (1 << 12) +#define AESST (1 << 11) +#define AESOP1 (1 << 10) +#define AESOP0 (1 << 9) +#define PKTDEC (1 << 8) +#define FCOP1 (1 << 7) +#define FCOP0 (1 << 6) +#define DMAST (1 << 5) +#define DMACPY (1 << 4) +#define DMACSSD (1 << 3) +#define DMANOCS (1 << 2) +#define TXRTS (1 << 1) +#define RXEN (1 << 0) + +/* ETXSTAT */ +#define LATECOL (1 << 10) +#define MAXCOL (1 << 9) +#define EXDEFER (1 << 8) +#define ETXSTATL_DEFER (1 << 7) +#define CRCBAD (1 << 4) +#define COLCNT_MASK 0xF + +/* ERXFCON */ +#define HTEN (1 << 15) +#define MPEN (1 << 14) +#define NOTPM (1 << 12) +#define PMEN3 (1 << 11) +#define PMEN2 (1 << 10) +#define PMEN1 (1 << 9) +#define PMEN0 (1 << 8) +#define CRCEEN (1 << 7) +#define CRCEN (1 << 6) +#define RUNTEEN (1 << 5) +#define RUNTEN (1 << 4) +#define UCEN (1 << 3) +#define NOTMEEN (1 << 2) +#define MCEN (1 << 1) +#define BCEN (1 << 0) + +/* MACON1 */ +#define LOOPBK (1 << 4) +#define RXPAUS (1 << 2) +#define PASSALL (1 << 1) + +/* MACON2 */ +#define MACON2_DEFER (1 << 14) +#define BPEN (1 << 13) +#define NOBKOFF (1 << 12) +#define PADCFG2 (1 << 7) +#define PADCFG1 (1 << 6) +#define PADCFG0 (1 << 5) +#define TXCRCEN (1 << 4) +#define PHDREN (1 << 3) +#define HFRMEN (1 << 2) +#define MACON2_RSV1 (1 << 1) +#define FULDPX (1 << 0) + +/* MAIPG */ +/* value of the high byte is given by the reserved bits, + * value of the low byte is recomended setting of the + * IPG parameter. + */ +#define MAIPGH_VAL 0x0C +#define MAIPGL_VAL 0x12 + +/* MIREGADRH */ +#define MIREGADR_VAL (1 << 8) + +/* MIREGADRL */ +#define PHREG_MASK 0x1F + +/* MICMD */ +#define MIISCAN (1 << 1) +#define MIIRD (1 << 0) + +/* MISTAT */ +#define NVALID (1 << 2) +#define SCAN (1 << 1) +#define BUSY (1 << 0) + +/* ECON2 */ +#define ETHEN (1 << 15) +#define STRCH (1 << 14) +#define TXMAC (1 << 13) +#define SHA1MD5 (1 << 12) +#define COCON3 (1 << 11) +#define COCON2 (1 << 10) +#define COCON1 (1 << 9) +#define COCON0 (1 << 8) +#define AUTOFC (1 << 7) +#define TXRST (1 << 6) +#define RXRST (1 << 5) +#define ETHRST (1 << 4) +#define MODLEN1 (1 << 3) +#define MODLEN0 (1 << 2) +#define AESLEN1 (1 << 1) +#define AESLEN0 (1 << 0) + +/* EIE */ +#define INTIE (1 << 15) +#define MODEXIE (1 << 14) +#define HASHIE (1 << 13) +#define AESIE (1 << 12) +#define LINKIE (1 << 11) +#define PKTIE (1 << 6) +#define DMAIE (1 << 5) +#define TXIE (1 << 3) +#define TXABTIE (1 << 2) +#define RXABTIE (1 << 1) +#define PCFULIE (1 << 0) + +/* EIDLED */ +#define LACFG3 (1 << 15) +#define LACFG2 (1 << 14) +#define LACFG1 (1 << 13) +#define LACFG0 (1 << 12) +#define LBCFG3 (1 << 11) +#define LBCFG2 (1 << 10) +#define LBCFG1 (1 << 9) +#define LBCFG0 (1 << 8) +#define DEVID_SHIFT 5 +#define DEVID_MASK (0x7 << DEVID_SHIFT) +#define REVID_SHIFT 0 +#define REVID_MASK (0x1F << REVID_SHIFT) + +/* PHY registers */ +#define PHCON1 0x00 +#define PHSTAT1 0x01 +#define PHANA 0x04 +#define PHANLPA 0x05 +#define PHANE 0x06 +#define PHCON2 0x11 +#define PHSTAT2 0x1B +#define PHSTAT3 0x1F + +/* PHCON1 */ +#define PRST (1 << 15) +#define PLOOPBK (1 << 14) +#define SPD100 (1 << 13) +#define ANEN (1 << 12) +#define PSLEEP (1 << 11) +#define RENEG (1 << 9) +#define PFULDPX (1 << 8) + +/* PHSTAT1 */ +#define FULL100 (1 << 14) +#define HALF100 (1 << 13) +#define FULL10 (1 << 12) +#define HALF10 (1 << 11) +#define ANDONE (1 << 5) +#define LRFAULT (1 << 4) +#define ANABLE (1 << 3) +#define LLSTAT (1 << 2) +#define EXTREGS (1 << 0) + +/* PHSTAT2 */ +#define PLRITY (1 << 4) + +/* PHSTAT3 */ +#define PHY3SPD100 (1 << 3) +#define PHY3DPX (1 << 4) +#define SPDDPX_SHIFT 2 +#define SPDDPX_MASK (0x7 << SPDDPX_SHIFT) + +/* PHANA */ +/* Default value for PHY initialization*/ +#define PHANA_DEFAULT 0x05E1 + +/* PHANE */ +#define PDFLT (1 << 4) +#define LPARCD (1 << 1) +#define LPANABL (1 << 0) + +#define EUDAST_TEST_VAL 0x1234 + +#define TSV_SIZE 7 + +#define ENCX24J600_DEV_ID 0x1 + +/* Configuration */ + +/* Led is on when the link is present and driven low + * temporarily when packet is TX'd or RX'd + */ +#define LED_A_SETTINGS 0xC + +/* Led is on if the link is in 100 Mbps mode */ +#define LED_B_SETTINGS 0x8 + +/* maximum ethernet frame length + * Currently not used as a limit anywhere + * (we're using the "huge frame enable" feature of + * enc424j600). + */ +#define MAX_FRAMELEN 1518 + +/* Size in bytes of the receive buffer in enc424j600. + * Must be word aligned (even). + */ +#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN) + +/* Start of the general purpose area in sram */ +#define SRAM_GP_START 0x0 + +/* SRAM size */ +#define SRAM_SIZE 0x6000 + +/* Start of the receive buffer */ +#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE) + +#define RSV_RXLONGEVDROPEV 16 +#define RSV_CARRIEREV 18 +#define RSV_CRCERROR 20 +#define RSV_LENCHECKERR 21 +#define RSV_LENOUTOFRANGE 22 +#define RSV_RXOK 23 +#define RSV_RXMULTICAST 24 +#define RSV_RXBROADCAST 25 +#define RSV_DRIBBLENIBBLE 26 +#define RSV_RXCONTROLFRAME 27 +#define RSV_RXPAUSEFRAME 28 +#define RSV_RXUNKNOWNOPCODE 29 +#define RSV_RXTYPEVLAN 30 + +#define RSV_RUNTFILTERMATCH 31 +#define RSV_NOTMEFILTERMATCH 32 +#define RSV_HASHFILTERMATCH 33 +#define RSV_MAGICPKTFILTERMATCH 34 +#define RSV_PTRNMTCHFILTERMATCH 35 +#define RSV_UNICASTFILTERMATCH 36 + +#define RSV_SIZE 8 +#define RSV_BITMASK(x) (1 << ((x) - 16)) +#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0) + +struct rsv { + u16 next_packet; + u16 len; + u32 rxstat; +}; + +/* Put RX buffer at 0 as suggested by the Errata datasheet */ + +#define RXSTART_INIT ERXST_VAL +#define RXEND_INIT 0x5FFF + +int regmap_encx24j600_spi_write(void *context, u8 reg, const u8 *data, + size_t count); +int regmap_encx24j600_spi_read(void *context, u8 reg, u8 *data, size_t count); + + +#endif |