Merge tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:

 - Unnecessary type casts from the 'void *' rproc->priv pointer are
   dropped throughout the subsystem.

 - A kernel-doc error is corrected in the Mediatek SCPI IPI
   implementation

 - The firmware loading onto the IMX DSP remote processors is reworked
   to avoid non-32bit memory operations. A module parameter is
   introduced to assist development of firmware without communication
   abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is
   cleaned up

 - The cluster configuration handling in the TI K3 R5 driver is
   corrected and support for the single-R5 core found in the TI AM62x
   SoC family is introduced

 - The TI PRU driver device- to virtual-address translation is updated
   to avoid compiler warning about the unsigned device-address always
   being larger than 0

 - The ST remoteproc driver is transitioned to use of_property_present()

 - Issues with kicks arriving after the STM32 remote processor has been
   shut down are mitigated by checking the processor's state before
   handling them.

 - Support for mailbox channels for communication with the remote
   processors are added to the Xilinx R5 remoteproc driver. The naming
   of carveouts are corrected and their parsing is reworked. For this a
   couple of fixes targeting the mailbox subsystem are picked up here as
   well.

 - Reference counting of of_nodes are corrected in the ST, STM32, RCAR
   and IMX remoteproc drivers

* tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits)
  remoteproc: st: Use of_property_present() for testing DT property presence
  dt-bindings: remoteproc: Drop unneeded quotes
  remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning
  remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc()
  remoteproc: pru: Remove always true check positive unsigned value
  dt-bindings: remoteproc: stm32-rproc: Typo fix
  remoteproc: stm32_rproc: Add mutex protection for workqueue
  remoteproc: Remove unnecessary (void*) conversions
  remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error
  remoteproc: imx_rproc: Call of_node_put() on iteration error
  remoteproc: rcar_rproc: Call of_node_put() on iteration error
  remoteproc: st: Call of_node_put() on iteration error
  remoteproc: stm32: Call of_node_put() on iteration error
  remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family
  dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
  remoteproc: k3-r5: Simplify cluster mode setting usage
  remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment
  remoteproc: xilinx: Add mailbox channels for rpmsg
  drivers: remoteproc: xilinx: Fix carveout names
  mailbox: zynqmp: Fix typo in IPI documentation
  ...

1 files changed, 55 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index fb9605f0655b..fcc3db97fe8f 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -21,6 +21,9 @@ description: |
   called "Single-CPU" mode, where only Core0 is used, but with ability to use
   Core1's TCMs as well.
 
+  AM62 SoC family support a single R5F core only which runs Device Manager
+  firmware and can also be used as a remote processor with IPC communication.
+
   Each Dual-Core R5F sub-system is represented as a single DTS node
   representing the cluster, with a pair of child DT nodes representing
   the individual R5F cores. Each node has a number of required or optional
@@ -34,10 +37,11 @@ properties:
 
   compatible:
     enum:
+      - ti,am62-r5fss
+      - ti,am64-r5fss
       - ti,am654-r5fss
-      - ti,j721e-r5fss
       - ti,j7200-r5fss
-      - ti,am64-r5fss
+      - ti,j721e-r5fss
       - ti,j721s2-r5fss
 
   power-domains:
@@ -64,10 +68,17 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Configuration Mode for the Dual R5F cores within the R5F cluster.
-      Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
+      For most SoCs (AM65x, J721E, J7200, J721s2),
+      It should be either a value of 1 (LockStep mode) or 0 (Split mode) on
       most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if
-      omitted; and should be either a value of 0 (Split mode) or 2
-      (Single-CPU mode) on AM64x SoCs, default is Split mode if omitted.
+      omitted.
+      For AM64x SoCs,
+      It  should be either a value of 0 (Split mode) or 2 (Single-CPU mode) and
+      default is Split mode if omitted.
+      For AM62x SoCs,
+      It should be set as 3 (Single-Core mode) which is also the default if
+      omitted.
+
 
 # R5F Processor Child Nodes:
 # ==========================
@@ -80,7 +91,9 @@ patternProperties:
       node representing a TI instantiation of the Arm Cortex R5F core. There
       are some specific integration differences for the IP like the usage of
       a Region Address Translator (RAT) for translating the larger SoC bus
-      addresses into a 32-bit address space for the processor.
+      addresses into a 32-bit address space for the processor. For AM62x,
+      the R5F Sub-System device node should only define one R5F child node
+      as it has only one core available.
 
       Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
       internal memories split between two banks - TCMA and TCMB (further
@@ -100,10 +113,11 @@ patternProperties:
     properties:
       compatible:
         enum:
+          - ti,am62-r5f
+          - ti,am64-r5f
           - ti,am654-r5f
-          - ti,j721e-r5f
           - ti,j7200-r5f
-          - ti,am64-r5f
+          - ti,j721e-r5f
           - ti,j721s2-r5f
 
       reg:
@@ -208,19 +222,39 @@ patternProperties:
 
     unevaluatedProperties: false
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,am64-r5fss
-then:
-  properties:
-    ti,cluster-mode:
-      enum: [0, 2]
-else:
-  properties:
-    ti,cluster-mode:
-      enum: [0, 1]
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [0, 2]
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am654-r5fss
+            - ti,j7200-r5fss
+            - ti,j721e-r5fss
+            - ti,j721s2-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [0, 1]
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am62-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [3]
 
 required:
   - compatible