Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...

12 files changed, 738 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
new file mode 100644
index 000000000000..170aad5dd7ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cirrus/cirrus,ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx platforms
+
+description:
+  The EP93xx SoC is a ARMv4T-based with 200 MHz ARM9 CPU.
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The TS-7250 is a compact, full-featured Single Board
+          Computer (SBC) based upon the Cirrus EP9302 ARM9 CPU
+        items:
+          - const: technologic,ts7250
+          - const: cirrus,ep9301
+
+      - description: The Liebherr BK3 is a derivate from ts7250 board
+        items:
+          - const: liebherr,bk3
+          - const: cirrus,ep9301
+
+      - description: EDB302 is an evaluation board by Cirrus Logic,
+          based on a Cirrus Logic EP9302 CPU
+        items:
+          - const: cirrus,edb9302
+          - const: cirrus,ep9301
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
new file mode 100644
index 000000000000..8130923fdc72
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cirrus,ep9312-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP9312 PATA controller
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9312-pata
+      - items:
+          - const: cirrus,ep9315-pata
+          - const: cirrus,ep9312-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ide@800a0000 {
+        compatible = "cirrus,ep9312-pata";
+        reg = <0x800a0000 0x38>;
+        interrupt-parent = <&vic1>;
+        interrupts = <8>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&ide_default_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
new file mode 100644
index 000000000000..871b76ddf90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC DMA controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-dma-m2m
+      - items:
+          - enum:
+              - cirrus,ep9302-dma-m2m
+              - cirrus,ep9307-dma-m2m
+              - cirrus,ep9312-dma-m2m
+              - cirrus,ep9315-dma-m2m
+          - const: cirrus,ep9301-dma-m2m
+
+  reg:
+    items:
+      - description: m2m0 channel registers
+      - description: m2m1 channel registers
+
+  clocks:
+    items:
+      - description: m2m0 channel gate clock
+      - description: m2m1 channel gate clock
+
+  clock-names:
+    items:
+      - const: m2m0
+      - const: m2m1
+
+  interrupts:
+    items:
+      - description: m2m0 channel interrupt
+      - description: m2m1 channel interrupt
+
+  '#dma-cells':
+    const: 2
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for ep93xx:
+
+      10: SPI controller
+      11: IDE controller
+
+      The second cell is the DMA direction line number:
+
+      1: Memory to device
+      2: Device to memory
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    dma-controller@80000100 {
+        compatible = "cirrus,ep9301-dma-m2m";
+        reg = <0x80000100 0x0040>,
+              <0x80000140 0x0040>;
+        clocks = <&syscon EP93XX_CLK_M2M0>,
+                 <&syscon EP93XX_CLK_M2M1>;
+        clock-names = "m2m0", "m2m1";
+        interrupt-parent = <&vic0>;
+        interrupts = <17>, <18>;
+        #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
new file mode 100644
index 000000000000..d14c31553543
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC M2P DMA controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-dma-m2p
+      - items:
+          - enum:
+              - cirrus,ep9302-dma-m2p
+              - cirrus,ep9307-dma-m2p
+              - cirrus,ep9312-dma-m2p
+              - cirrus,ep9315-dma-m2p
+          - const: cirrus,ep9301-dma-m2p
+
+  reg:
+    items:
+      - description: m2p0 channel registers
+      - description: m2p1 channel registers
+      - description: m2p2 channel registers
+      - description: m2p3 channel registers
+      - description: m2p4 channel registers
+      - description: m2p5 channel registers
+      - description: m2p6 channel registers
+      - description: m2p7 channel registers
+      - description: m2p8 channel registers
+      - description: m2p9 channel registers
+
+  clocks:
+    items:
+      - description: m2p0 channel gate clock
+      - description: m2p1 channel gate clock
+      - description: m2p2 channel gate clock
+      - description: m2p3 channel gate clock
+      - description: m2p4 channel gate clock
+      - description: m2p5 channel gate clock
+      - description: m2p6 channel gate clock
+      - description: m2p7 channel gate clock
+      - description: m2p8 channel gate clock
+      - description: m2p9 channel gate clock
+
+  clock-names:
+    items:
+      - const: m2p0
+      - const: m2p1
+      - const: m2p2
+      - const: m2p3
+      - const: m2p4
+      - const: m2p5
+      - const: m2p6
+      - const: m2p7
+      - const: m2p8
+      - const: m2p9
+
+  interrupts:
+    items:
+      - description: m2p0 channel interrupt
+      - description: m2p1 channel interrupt
+      - description: m2p2 channel interrupt
+      - description: m2p3 channel interrupt
+      - description: m2p4 channel interrupt
+      - description: m2p5 channel interrupt
+      - description: m2p6 channel interrupt
+      - description: m2p7 channel interrupt
+      - description: m2p8 channel interrupt
+      - description: m2p9 channel interrupt
+
+  '#dma-cells':
+    const: 2
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for ep93xx:
+
+      0: I2S channel 1
+      1: I2S channel 2 (unused)
+      2: AC97 channel 1 (unused)
+      3: AC97 channel 2 (unused)
+      4: AC97 channel 3 (unused)
+      5: I2S channel 3 (unused)
+      6: UART1 (unused)
+      7: UART2 (unused)
+      8: UART3 (unused)
+      9: IRDA (unused)
+
+      The second cell is the DMA direction line number:
+
+      1: Memory to device
+      2: Device to memory
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    dma-controller@80000000 {
+        compatible = "cirrus,ep9301-dma-m2p";
+        reg = <0x80000000 0x0040>,
+              <0x80000040 0x0040>,
+              <0x80000080 0x0040>,
+              <0x800000c0 0x0040>,
+              <0x80000240 0x0040>,
+              <0x80000200 0x0040>,
+              <0x800002c0 0x0040>,
+              <0x80000280 0x0040>,
+              <0x80000340 0x0040>,
+              <0x80000300 0x0040>;
+        clocks = <&syscon EP93XX_CLK_M2P0>,
+                 <&syscon EP93XX_CLK_M2P1>,
+                 <&syscon EP93XX_CLK_M2P2>,
+                 <&syscon EP93XX_CLK_M2P3>,
+                 <&syscon EP93XX_CLK_M2P4>,
+                 <&syscon EP93XX_CLK_M2P5>,
+                 <&syscon EP93XX_CLK_M2P6>,
+                 <&syscon EP93XX_CLK_M2P7>,
+                 <&syscon EP93XX_CLK_M2P8>,
+                 <&syscon EP93XX_CLK_M2P9>;
+        clock-names = "m2p0", "m2p1",
+                      "m2p2", "m2p3",
+                      "m2p4", "m2p5",
+                      "m2p6", "m2p7",
+                      "m2p8", "m2p9";
+        interrupt-parent = <&vic0>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+        #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
index daadfb4926c3..3a1079d6ee20 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -73,9 +73,10 @@ examples:
       reg-names = "data", "dir", "intr";
       gpio-controller;
       #gpio-cells = <2>;
-        interrupt-controller;
-        interrupt-parent = <&vic1>;
-        interrupts = <27>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupt-parent = <&vic1>;
+      interrupts = <27>;
     };
 
     gpio@80840004 {
@@ -87,6 +88,7 @@ examples:
       gpio-controller;
       #gpio-cells = <2>;
       interrupt-controller;
+      #interrupt-cells = <2>;
       interrupt-parent = <&vic1>;
       interrupts = <27>;
     };
@@ -127,6 +129,7 @@ examples:
       gpio-controller;
       #gpio-cells = <2>;
       interrupt-controller;
+      #interrupt-cells = <2>;
       interrupts-extended = <&vic0 19>, <&vic0 20>,
                             <&vic0 21>, <&vic0 22>,
                             <&vic1 15>, <&vic1 16>,
diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
new file mode 100644
index 000000000000..a0d2460c55ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus ep93xx keypad
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description:
+  The KPP is designed to interface with a keypad matrix with 2-point contact
+  or 3-point contact keys. The KPP is designed to simplify the software task
+  of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+  and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9307-keypad
+      - items:
+          - enum:
+              - cirrus,ep9312-keypad
+              - cirrus,ep9315-keypad
+          - const: cirrus,ep9307-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  debounce-delay-ms:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+
+  cirrus,prescale:
+    description: row/column counter pre-scaler load value
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 1023
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    keypad@800f0000 {
+        compatible = "cirrus,ep9307-keypad";
+        reg = <0x800f0000 0x0c>;
+        interrupt-parent = <&vic0>;
+        interrupts = <29>;
+        clocks = <&eclk EP93XX_CLK_KEYPAD>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_default_pins>;
+        linux,keymap = <KEY_UP>,
+                       <KEY_DOWN>,
+                       <KEY_VOLUMEDOWN>,
+                       <KEY_HOME>,
+                       <KEY_RIGHT>,
+                       <KEY_LEFT>,
+                       <KEY_ENTER>,
+                       <KEY_VOLUMEUP>,
+                       <KEY_F6>,
+                       <KEY_F8>,
+                       <KEY_F9>,
+                       <KEY_F10>,
+                       <KEY_F1>,
+                       <KEY_F2>,
+                       <KEY_F3>,
+                       <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/technologic,nand.yaml b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml
new file mode 100644
index 000000000000..f9d87c46094b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/technologic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems NAND controller
+
+maintainers:
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - const: technologic,ts7200-nand
+      - items:
+          - enum:
+              - technologic,ts7300-nand
+              - technologic,ts7260-nand
+              - technologic,ts7250-nand
+          - const: technologic,ts7200-nand
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@60000000 {
+        compatible = "technologic,ts7200-nand";
+        reg = <0x60000000 0x8000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand@0 {
+           reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml
new file mode 100644
index 000000000000..ad0915307095
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cirrus,ep9301-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC Ethernet Controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-eth
+      - items:
+          - enum:
+              - cirrus,ep9302-eth
+              - cirrus,ep9307-eth
+              - cirrus,ep9312-eth
+              - cirrus,ep9315-eth
+          - const: cirrus,ep9301-eth
+
+  reg:
+    items:
+      - description: The physical base address and size of IO range
+
+  interrupts:
+    items:
+      - description: Combined signal for various interrupt events
+
+  phy-handle: true
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@80010000 {
+        compatible = "cirrus,ep9301-eth";
+        reg = <0x80010000 0x10000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <7>;
+        phy-handle = <&phy0>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml
new file mode 100644
index 000000000000..903210ef9c31
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/cirrus,ep9301-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx PWM controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-pwm
+      - items:
+          - enum:
+              - cirrus,ep9302-pwm
+              - cirrus,ep9307-pwm
+              - cirrus,ep9312-pwm
+              - cirrus,ep9315-pwm
+          - const: cirrus,ep9301-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC PWM clock
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    pwm@80910000 {
+        compatible = "cirrus,ep9301-pwm";
+        reg = <0x80910000 0x10>;
+        clocks = <&syscon EP93XX_CLK_PWM>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml
new file mode 100644
index 000000000000..7cb1b4114985
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cirrus/cirrus,ep9301-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Platforms System Controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description: |
+  Central resources are controlled by a set of software-locked registers,
+  which can be used to prevent accidental accesses. Syscon generates
+  the various bus and peripheral clocks and controls the system startup
+  configuration.
+
+  The System Controller (Syscon) provides:
+  - Clock control
+  - Power management
+  - System configuration management
+
+  Syscon registers are common for all EP93xx SoC's, through some actual peripheral
+  may be missing depending on actual SoC model.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cirrus,ep9302-syscon
+              - cirrus,ep9307-syscon
+              - cirrus,ep9312-syscon
+              - cirrus,ep9315-syscon
+          - const: cirrus,ep9301-syscon
+          - const: syscon
+      - items:
+          - const: cirrus,ep9301-syscon
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: reference clock
+
+patternProperties:
+  '^pins-':
+    type: object
+    description: pin node
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [ spi, ac97, i2s, pwm, keypad, pata, lcd, gpio ]
+
+      groups:
+        enum: [ ssp, ac97, i2s_on_ssp, i2s_on_ac97, pwm1, gpio1agrp,
+                gpio2agrp, gpio3agrp, gpio4agrp, gpio6agrp, gpio7agrp,
+                rasteronsdram0grp, rasteronsdram3grp, keypadgrp, idegrp ]
+
+    required:
+      - function
+      - groups
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@80930000 {
+      compatible = "cirrus,ep9301-syscon", "syscon";
+      reg = <0x80930000 0x1000>;
+
+      #clock-cells = <1>;
+      clocks = <&xtali>;
+
+      spi_default_pins: pins-spi {
+        function = "spi";
+        groups = "ssp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
index 453d493c941f..4693e85aed37 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
@@ -40,6 +40,20 @@ properties:
       - const: sclk
       - const: lrclk
 
+  dmas:
+    items:
+      - description: out DMA channel
+      - description: in DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - '#sound-dai-cells'
@@ -61,6 +75,8 @@ examples:
                  <&syscon 30>,
                  <&syscon 31>;
         clock-names = "mclk", "sclk", "lrclk";
+        dmas = <&dma0 0 1>, <&dma0 0 2>;
+        dma-names = "tx", "rx";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml
new file mode 100644
index 000000000000..73980a27dc00
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cirrus,ep9301-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC SPI controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-spi
+      - items:
+          - enum:
+              - cirrus,ep9302-spi
+              - cirrus,ep9307-spi
+              - cirrus,ep9312-spi
+              - cirrus,ep9315-spi
+          - const: cirrus,ep9301-spi
+
+  reg:
+    items:
+      - description: SPI registers region
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI Controller reference clock source
+
+  dmas:
+    items:
+      - description: rx DMA channel
+      - description: tx DMA channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    spi@808a0000 {
+        compatible = "cirrus,ep9301-spi";
+        reg = <0x808a0000 0x18>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+        clocks = <&syscon EP93XX_CLK_SPI>;
+        dmas = <&dma1 10 2>, <&dma1 10 1>;
+        dma-names = "rx", "tx";
+        cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+    };