Merge tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Fix 'mfd_of_node_list' OF node entry resource leak

  New Drivers:
   - Add support for Ocelot VSC7512 Networking Chip
   - Add support for MediaTek MT6370 subPMIC
   - Add support for Richtek RT5120 (I2C) PMIC

  New Device Support:
   - Add support for Rockchip RV1126 and RK3588 to Syscon
   - Add support for Rockchip RK817 Battery Charger to RK808
   - Add support for Silergy SY7636a Voltage Regulator to Simple MFD
   - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI
   - Add support for Secure Update to Intel M10 BMC

  New Functionality:
   - Provide SSP type to Intel's LPSS (PCI) SPI driver

  Fix-ups:
   - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon
   - Unify / simplify; intel_soc_pmic_crc
   - Trivial reordering / spelling, etc; Makefile, twl-core
   - Convert to managed resources; intel_soc_pmic_crc
   - Use appropriate APIs; intel_soc_pmic_crc
   - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core
   - GPIOD conversion; htc-i2cpld, stmpe
   - Add missing header file includes; twl4030-irq
   - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152,
     aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon,
     qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063

  Bug Fixes:
   - Properly check return values; sm501, htc-i2cpld
   - Repair Two-Wire Bus Mode; da9062-core
   - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788,
     lp8788-irq"

* tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: syscon: Remove repetition of the regmap_get_val_endian()
  mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE
  power: supply: Add charger driver for Rockchip RK817
  dt-bindings: mfd: mt6370: Fix the indentation in the example
  mfd: da9061: Fix Failed to set Two-Wire Bus Mode.
  mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()
  dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018
  mfd: sm501: Add check for platform_driver_register()
  dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186
  mfd: twl4030: Add missed linux/device.h header
  dt-bindings: mfd: dlg,da9063: Add missing regulator patterns
  dt-bindings: mfd: sprd: Add bindings for ums512 global registers
  mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc
  dt-bindings: mfd: syscon: Add rk3588 QoS register compatible
  mfd: stmpe: Switch to using gpiod API
  mfd: qcom-spmi-pmic: Add pm7250b compatible
  dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
  mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver
  mfd: intel-m10-bmc: Add d5005 bmc secure update driver
  dt-bindings: mfd: syscon: Drop ref from reg-io-width
  ...

25 files changed, 1007 insertions, 84 deletions

diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index d131759ccaf3..021d33cb3dd6 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*_(clk|rst)$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -38,6 +39,45 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun6i-a31-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index aa5e683b236c..01f4f5210574 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*(clk|rst|codec).*$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -40,6 +41,15 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun8i-a23-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 000000000000..1689b986f441
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    type: object
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    oneOf:
+      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+
+  '^interrupt-controller@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+    type: object
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
deleted file mode 100644
index 857ee33f7329..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-The Aspeed System Control Unit manages the global behaviour of the SoC,
-configuring elements such as clocks, pinmux, and reset.
-
-Required properties:
-- compatible:	One of:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-- reg:		contains the offset and length of the SCU memory region
-- #clock-cells: should be set to <1> - the system controller is also a
-	clock provider
-- #reset-cells: should be set to <1> - the system controller is also a
-	reset line provider
-
-Example:
-
-syscon: syscon@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Silicon ID
------------------
-
-Families have unique hardware silicon identifiers within the SoC.
-
-Required properties:
-
- - compatible:		"aspeed,silicon-id" or:
-			"aspeed,ast2400-silicon-id" or
-			"aspeed,ast2500-silicon-id" or
-			"aspeed,ast2600-silicon-id"
-
- - reg:			offset and length of the silicon id information
-			optionally, a second offset and length describes the unique chip id
-
-			The reg should be the unique silicon id register, and
-			not backwards compatible one in eg. the 2600.
-
-Example:
-
-
-silicon-id@7c {
-        compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
-        reg = <0x7c 0x4 0x150 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index ad285cb480c9..86f7341eb7e1 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -144,6 +144,7 @@ properties:
       CODECs digital core if not being provided by an internal regulator.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -161,6 +162,7 @@ properties:
       CODECs MICVDD.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -177,6 +179,7 @@ properties:
       Initialisation data for the MIC1VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -202,6 +205,7 @@ properties:
       Initialisation data for the MIC2VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -228,6 +232,7 @@ properties:
       the CODECs analog and 1.8V digital supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index d71933460e90..e8e74e91070c 100644
--- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -71,8 +71,9 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     patternProperties:
-      "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$":
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
         $ref: /schemas/regulator/regulator.yaml
         unevaluatedProperties: false
 
@@ -112,7 +113,7 @@ examples:
         };
 
         regulators {
-          regulator-bcore1 {
+          bcore1 {
             regulator-name = "BCORE1";
             regulator-min-microvolt = <300000>;
             regulator-max-microvolt = <1570000>;
@@ -120,7 +121,7 @@ examples:
             regulator-max-microamp = <2000000>;
             regulator-boot-on;
           };
-          regulator-ldo11 {
+          ldo11 {
             regulator-name = "LDO_11";
             regulator-min-microvolt = <900000>;
             regulator-max-microvolt = <3600000>;
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 5e0fe3ebe1d2..acb9c54942d9 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -46,6 +46,7 @@ properties:
 
   adc:
     type: object
+    additionalProperties: false
     description: Optional hardware monitoring module
 
     properties:
@@ -59,8 +60,9 @@ properties:
         const: 0
 
     patternProperties:
-      "^channel@[0-9]+$":
+      "^channel@[0-9a-f]+$":
         type: object
+        additionalProperties: false
         description: |
           Properties for a single ADC which can report cooked values
           (i.e. temperature sensor based on thermister), raw values
@@ -113,6 +115,7 @@ properties:
 patternProperties:
   "^fan-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: Optional fan controller
 
     properties:
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
index 52edd1bf549f..995e96ee7445 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -39,6 +39,7 @@ properties:
 
   extcon:
     type: object
+    additionalProperties: false
     properties:
       compatible:
         enum:
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
index f30f96bbff43..2e2a2a86b57d 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -32,6 +32,7 @@ properties:
 
   motor-driver:
     type: object
+    additionalProperties: false
     properties:
       compatible:
         const: maxim,max77843-haptic
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 000000000000..250484d59ecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 SubPMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MT6370 is a highly-integrated smart power management IC, which includes a
+  single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+  Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+  driver, a backlight WLED driver, a display bias driver and a general LDO for
+  portable devices.
+
+properties:
+  compatible:
+    const: mediatek,mt6370
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  adc:
+    type: object
+    description: |
+      Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+      accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+      measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+    properties:
+      compatible:
+        const: mediatek,mt6370-adc
+
+      "#io-channel-cells":
+        const: 1
+
+    required:
+      - compatible
+      - "#io-channel-cells"
+
+  backlight:
+    type: object
+    $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml#
+
+  tcpc:
+    type: object
+    $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml#
+
+  indicator:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-indicator.yaml#
+
+  flashlight:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml#
+
+  regulators:
+    type: object
+    description: |
+      List all supported regulators, which support the control for DisplayBias
+      voltages and one general purpose LDO which commonly used to drive the
+      vibrator.
+
+    patternProperties:
+      "^(dsvbst|vibldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(dsvpos|dsvneg)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - regulators
+  - adc
+  - backlight
+  - indicator
+  - tcpc
+  - charger
+  - flashlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "mediatek,mt6370";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        mt6370_adc: adc {
+          compatible = "mediatek,mt6370-adc";
+          #io-channel-cells = <1>;
+        };
+
+        backlight {
+          compatible = "mediatek,mt6370-backlight";
+          mediatek,bled-channel-use = /bits/ 8 <15>;
+        };
+
+        charger {
+          compatible = "mediatek,mt6370-charger";
+          interrupts = <48>, <68>, <6>;
+          interrupt-names = "attach_i", "uvp_d_evt", "mivr";
+          io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+          mt6370_otg_vbus: usb-otg-vbus-regulator {
+            regulator-name = "mt6370-usb-otg-vbus";
+            regulator-min-microvolt = <4350000>;
+            regulator-max-microvolt = <5800000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+          };
+        };
+
+        indicator {
+          compatible = "mediatek,mt6370-indicator";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+              reg = <0>;
+              color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+              reg = <1>;
+              color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+              reg = <2>;
+              color = <LED_COLOR_ID_BLUE>;
+            };
+          };
+          led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <6000>;
+          };
+        };
+
+        flashlight {
+          compatible = "mediatek,mt6370-flashlight";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          led@0 {
+            reg = <0>;
+            led-sources = <0>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+          led@1 {
+            reg = <1>;
+            led-sources = <1>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+        };
+
+        tcpc {
+          compatible = "mediatek,mt6370-tcpc";
+          interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            vbus-supply = <&mt6370_otg_vbus>;
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+
+        regulators {
+          dsvbst {
+            regulator-name = "mt6370-dsv-vbst";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6200000>;
+          };
+          dsvpos {
+            regulator-name = "mt6370-dsv-vpos";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          dsvneg {
+            regulator-name = "mt6370-dsv-vneg";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          vibldo {
+            regulator-name = "mt6370-vib-ldo";
+            regulator-min-microvolt = <1600000>;
+            regulator-max-microvolt = <4000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
new file mode 100644
index 000000000000..c8c4812fffe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Control Processor System
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+
+description:
+  MediaTek System Control Processor System (SCPSYS) has several
+  power management tasks. The tasks include MTCMOS power
+  domain control, thermal measurement, DVFS, etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8167-scpsys
+          - mediatek,mt8173-scpsys
+          - mediatek,mt8183-scpsys
+          - mediatek,mt8186-scpsys
+          - mediatek,mt8192-scpsys
+          - mediatek,mt8195-scpsys
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  power-controller:
+    $ref: /schemas/power/mediatek,power-controller.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    syscon@10006000 {
+      compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+      reg = <0x10006000 0x100>;
+
+      spm: power-controller {
+        compatible = "mediatek,mt8195-power-controller";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #power-domain-cells = <1>;
+
+        /* sample of power domain nodes */
+        power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+
+        power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 65cbc6dee545..6a3e3ede1ede 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -33,19 +33,22 @@ properties:
   compatible:
     items:
       - enum:
-          - qcom,pm660
-          - qcom,pm660l
           - qcom,pm6150
           - qcom,pm6150l
           - qcom,pm6350
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm7250b
           - qcom,pm7325
           - qcom,pm8004
           - qcom,pm8005
           - qcom,pm8009
           - qcom,pm8019
+          - qcom,pm8028
           - qcom,pm8110
           - qcom,pm8150
           - qcom,pm8150b
+          - qcom,pm8150c
           - qcom,pm8150l
           - qcom,pm8226
           - qcom,pm8350
@@ -56,6 +59,7 @@ properties:
           - qcom,pm8916
           - qcom,pm8941
           - qcom,pm8950
+          - qcom,pm8953
           - qcom,pm8994
           - qcom,pm8998
           - qcom,pma8084
@@ -64,8 +68,10 @@ properties:
           - qcom,pmi8962
           - qcom,pmi8994
           - qcom,pmi8998
+          - qcom,pmk8002
           - qcom,pmk8350
           - qcom,pmm8155au
+          - qcom,pmp8074
           - qcom,pmr735a
           - qcom,pmr735b
           - qcom,pms405
@@ -90,7 +96,7 @@ properties:
 
   regulators:
     type: object
-    $ref: /schemas/regulator/regulator.yaml#
+    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 
 patternProperties:
   "^adc@[0-9a-f]+$":
@@ -99,7 +105,7 @@ patternProperties:
 
   "^adc-tm@[0-9a-f]+$":
     type: object
-    $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+    # ref depends on compatible, see allOf below
 
   "^audio-codec@[0-9a-f]+$":
     type: object
@@ -146,6 +152,22 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998
+    then:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+    else:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+
 additionalProperties: false
 
 examples:
@@ -188,3 +210,87 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            adc-chan@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            adc-chan@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpios@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index d3c25daa995e..b12809b5cc22 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -15,31 +15,27 @@ description:
 
 properties:
   compatible:
-    oneOf:
-      - items:
-          - enum:
-              - qcom,msm8998-tcsr
-              - qcom,qcs404-tcsr
-              - qcom,sc7180-tcsr
-              - qcom,sc7280-tcsr
-              - qcom,sdm630-tcsr
-              - qcom,sdm845-tcsr
-              - qcom,sm8150-tcsr
-              - qcom,tcsr-apq8064
-              - qcom,tcsr-apq8084
-              - qcom,tcsr-ipq8064
-              - qcom,tcsr-mdm9615
-              - qcom,tcsr-msm8660
-              - qcom,tcsr-msm8916
-              - qcom,tcsr-msm8953
-              - qcom,tcsr-msm8960
-              - qcom,tcsr-msm8974
-              - qcom,tcsr-msm8996
-          - const: syscon
-      - items:
-          - const: qcom,tcsr-ipq6018
-          - const: syscon
-          - const: simple-mfd
+    items:
+      - enum:
+          - qcom,msm8998-tcsr
+          - qcom,qcs404-tcsr
+          - qcom,sc7180-tcsr
+          - qcom,sc7280-tcsr
+          - qcom,sdm630-tcsr
+          - qcom,sdm845-tcsr
+          - qcom,sm8150-tcsr
+          - qcom,tcsr-apq8064
+          - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq6018
+          - qcom,tcsr-ipq8064
+          - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8660
+          - qcom,tcsr-msm8916
+          - qcom,tcsr-msm8953
+          - qcom,tcsr-msm8960
+          - qcom,tcsr-msm8974
+          - qcom,tcsr-msm8996
+      - const: syscon
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 000000000000..f73b8b25d7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5120 provides four high-efficiency buck converters and one LDO voltage
+  regulator. The device is targeted at providingthe processor voltage, memory,
+  I/O, and peripheral rails in home entertainment devices. The I2C interface is
+  used for dynamic voltage scaling of the processor voltage, power rails on/off
+  sequence control, operation mode selection.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5120
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  wakeup-source: true
+
+  richtek,enable-undervolt-hiccup:
+    type: boolean
+    description: |
+      If used, under voltage protection trigger hiccup behavior, else latchup as
+      default
+
+  richtek,enable-overvolt-hiccup:
+    type: boolean
+    description:
+      Like as 'enable-uv-hiccup', it configures over voltage protection to
+      hiccup, else latchup as default
+
+  vin1-supply:
+    description: phandle for buck1 input power source
+
+  vin2-supply:
+    description: phandle for buck2 input power source
+
+  vin3-supply:
+    description: phandle for buck3 input power source
+
+  vin4-supply:
+    description: phandle for buck4 input power source
+
+  vinldo-supply:
+    description: phandle for ldo input power source
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+              Used to specify the allowed buck converter operating mode
+              mode mapping:
+                0: auto mode
+                1: force pwm mode
+            items:
+              enum: [0, 1]
+
+      "^(ldo|exten)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  powerkey:
+    type: object
+    description:
+      PON key that connected to RT5120 PMIC.
+
+    properties:
+      compatible:
+        enum:
+          - richtek,rt5120-pwrkey
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - regulators
+  - powerkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "richtek,rt5120";
+        reg = <0x62>;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        wakeup-source;
+
+        regulators {
+          buck1 {
+            regulator-name = "rt5120-buck1";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1393750>;
+            regulator-allowed-modes = <0 1>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5120-buck2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "rt5120-buck3";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "rt5120-buck4";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          ldo {
+            regulator-name = "rt5120-ldo";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+          exten {
+            regulator-name = "rt5120-exten";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+        };
+        powerkey {
+          compatible = "richtek,rt5120-pwrkey";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
index bfc1720adc43..935e17099213 100644
--- a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
@@ -87,6 +87,7 @@ properties:
     patternProperties:
       "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
         type: object
+        unevaluatedProperties: false
         $ref: ../regulator/regulator.yaml#
     unevaluatedProperties: false
 
@@ -111,12 +112,56 @@ properties:
       additional properties are required for the codec, this node can be
       omitted.
     type: object
+    additionalProperties: false
     properties:
       rockchip,mic-in-differential:
         type: boolean
         description:
           Describes if the microphone uses differential mode.
 
+  charger:
+    description: |
+      The child node for the charger to hold additional properties. If a
+      battery is not in use, this node can be omitted.
+    type: object
+    properties:
+      monitored-battery:
+        description: |
+          A phandle to a monitored battery node that contains a valid
+          value for:
+          charge-full-design-microamp-hours,
+          charge-term-current-microamp,
+          constant-charge-current-max-microamp,
+          constant-charge-voltage-max-microvolt,
+          voltage-max-design-microvolt,
+          voltage-min-design-microvolt,
+          and a valid ocv-capacity table.
+
+      rockchip,resistor-sense-micro-ohms:
+        description: |
+          Value in microohms of the battery sense resistor. This value is
+          used by the driver to set the correct divisor value to translate
+          ADC readings into the proper units of measure.
+        enum: [10000, 20000]
+
+      rockchip,sleep-enter-current-microamp:
+        description: |
+          Value in microamps of the sleep enter current for the charger.
+          Value is used by the driver to calibrate the relax threshold.
+
+      rockchip,sleep-filter-current-microamp:
+        description:
+          Value in microamps of the sleep filter current for the charger.
+          Value is used by the driver to derive the sleep sample current.
+
+    required:
+      - monitored-battery
+      - rockchip,resistor-sense-micro-ohms
+      - rockchip,sleep-enter-current-microamp
+      - rockchip,sleep-filter-current-microamp
+
+    additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -323,6 +368,13 @@ examples:
                 };
             };
 
+            rk817_charger: charger {
+                monitored-battery = <&battery>;
+                rockchip,resistor-sense-micro-ohms = <10000>;
+                rockchip,sleep-enter-current-microamp = <300000>;
+                rockchip,sleep-filter-current-microamp = <100000>;
+            };
+
             rk817_codec: codec {
                 rockchip,mic-in-differential;
             };
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
index 6de74c701635..ee0be32ac020 100644
--- a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -42,6 +42,7 @@ properties:
       vcom:
         type: object
         $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
         description:
           The regulator for the compenstation voltage. Enabling/disabling this
           enables/disables the entire device.
diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
new file mode 100644
index 000000000000..996bd4a17ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc System Global Register
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  Unisoc system global registers provide register map
+  for clocks and some multimedia modules of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: sprd,ums512-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/sprd,ums512-clk.yaml#
+    description:
+      Clock controller for the SoC clocks.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_apb_regs: syscon@71000000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x71000000 0x3000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x71000000 0x3000>;
+
+      clock-controller@0 {
+        compatible = "sprd,ums512-apahb-gate";
+        reg = <0x0 0x2000>;
+        #clock-cells = <1>;
+      };
+    };
+
+  - |
+    ap_intc5_regs: syscon@32360000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x32360000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index a58f08aa430d..d950dd5d48bd 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -46,6 +46,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -60,6 +61,7 @@ properties:
 
   counter:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -70,6 +72,7 @@ properties:
 
   timer:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -81,6 +84,7 @@ properties:
 patternProperties:
   "^trigger@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index 5db00af8e116..e2c3c3b44abb 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -69,6 +69,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -104,6 +105,7 @@ properties:
 
   counter:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -115,6 +117,7 @@ properties:
 patternProperties:
   "^timer@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
index b2a4e4aa7ff6..b4d54302582f 100644
--- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -57,6 +57,7 @@ properties:
     patternProperties:
       "^[a-zA-Z]*-pins$":
         type: object
+        additionalProperties: false
 
         allOf:
           - $ref: ../pinctrl/pinmux-node.yaml
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
index 623a4b5cd27a..6c8d42f27fe8 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -51,6 +51,7 @@ properties:
       provides the reference clock for the entire U8500 system and
       the DB8500 counterpart.
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -63,6 +64,7 @@ properties:
     description: Node describing the AB8500 GPIO controller. A few
       GPIO pins available for misc usage.
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -78,6 +80,7 @@ properties:
   rtc:
     description: Node describing the AB8500 battery-backed RTC.
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -337,34 +340,40 @@ properties:
         description: The voltage for the auxilary LDO regulator 1
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_aux2:
         description: The voltage for the auxilary LDO regulator 2
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_aux3:
         description: The voltage for the auxilary LDO regulator 3
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_aux4:
         description: The voltage for the auxilary LDO regulator 4
           only present on AB8505
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_aux5:
         description: The voltage for the auxilary LDO regulator 5
           only present on AB8505
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_aux6:
         description: The voltage for the auxilary LDO regulator 6
           only present on AB8505
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       # There is never any AUX7 regulator which is confusing
 
@@ -373,18 +382,21 @@ properties:
           only present on AB8505
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_intcore:
         description: The LDO regulator for the internal core voltage
           of the AB8500
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_adc:
         description: Analog power regulator for the analog to digital converter
           ADC, only present on AB8505
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_tvout:
         description: The voltage for the TV output regulator, incidentally
@@ -393,33 +405,39 @@ properties:
           Only present on AB8500.
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_audio:
         description: The LDO regulator for the audio codec output
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_anamic1:
         description: The LDO regulator for the analog microphone 1
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_anamic2:
         description: The LDO regulator for the analog microphone 2
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_dmic:
         description: The LDO regulator for the digital microphone
           only present on AB8500
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ldo_ana:
         description: Analog power regulator for CSI and DSI interfaces,
           Camera Serial Interface CSI and Display Serial Interface DSI.
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
     required:
       - compatible
@@ -442,16 +460,19 @@ properties:
         description: The voltage for the VSMPS1 external regulator
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ext2:
         description: The voltage for the VSMPS2 external regulator
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
       ab8500_ext3:
         description: The voltage for the VSMPS3 external regulator
         type: object
         $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
 
     required:
       - compatible
@@ -462,6 +483,7 @@ patternProperties:
   "^pwm@[1-9]+?$":
     type: object
     $ref: ../pwm/pwm.yaml#
+    unevaluatedProperties: false
     description: Represents each of the PWM blocks in the AB8500
 
     properties:
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 5cbf2c5978b3..4fc483b1aee7 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -61,6 +61,8 @@ properties:
               - rockchip,rk3368-qos
               - rockchip,rk3399-qos
               - rockchip,rk3568-qos
+              - rockchip,rk3588-qos
+              - rockchip,rv1126-qos
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
@@ -73,7 +75,7 @@ properties:
       - contains:
           const: syscon
         minItems: 2
-        maxItems: 4  # Should be enough
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -82,7 +84,6 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
 
   hwlocks:
@@ -94,6 +95,18 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
 additionalProperties: true
 
 examples:
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
index 6aeedda3be15..3fdd9cb5b347 100644
--- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -38,6 +38,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description: |
       List of child nodes that specify the regulator initialization data.
       Child nodes must be named after their hardware counterparts:
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 3a53bae611bc..1c7601d05807 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -93,6 +93,9 @@ properties:
           - x-powers,axp809
           - x-powers,axp813
       - items:
+          - const: x-powers,axp228
+          - const: x-powers,axp221
+      - items:
           - const: x-powers,axp805
           - const: x-powers,axp806
       - items:
@@ -260,6 +263,7 @@ properties:
       "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$":
         $ref: /schemas/regulator/regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
         properties:
           regulator-ramp-delay:
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index 03b7f6aa591d..605ec7ab5f63 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -135,7 +135,7 @@ examples:
         #size-cells = <2>;
 
         scpsys: syscon@10006000 {
-            compatible = "syscon", "simple-mfd";
+            compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
             reg = <0 0x10006000 0 0x1000>;
 
             spm: power-controller {