diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-09-26 19:13:08 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-09-26 19:13:08 +0200 |
| commit | 5e5466433d266046790c0af40a15af0a6be139a1 (patch) | |
| tree | f1e9155afa84ccc2ac6d2499453f9521d752efaf /Documentation/devicetree | |
| parent | Merge tag 'staging-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git... (diff) | |
| parent | greybus: gb-beagleplay: Add firmware upload API (diff) | |
| download | linux-5e5466433d266046790c0af40a15af0a6be139a1.tar.xz linux-5e5466433d266046790c0af40a15af0a6be139a1.zip | |
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
Diffstat (limited to 'Documentation/devicetree')
43 files changed, 1638 insertions, 109 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52d..072b3c0c5fd0 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -37,6 +37,11 @@ properties: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + required: - compatible - interrupts @@ -58,5 +63,11 @@ examples: interrupt-parent = <&msmgpio>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt deleted file mode 100644 index dfc14f71e81f..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt +++ /dev/null @@ -1,21 +0,0 @@ -USB GPIO Extcon device - -This is a virtual device used to generate USB cable states from the USB ID pin -connected to a GPIO pin. - -Required properties: -- compatible: Should be "linux,extcon-usb-gpio" - -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. -- id-gpio: gpio for USB ID pin. See gpio binding. -- vbus-gpio: gpio for USB VBUS pin. - -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: - extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; - } - - &omap_dwc3_1 { - extcon = <&extcon_usb1>; - }; diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml new file mode 100644 index 000000000000..8856107bdd33 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB GPIO Extcon device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + This is a virtual device used to generate USB cable states from the USB ID pin + connected to a GPIO pin. + +properties: + compatible: + const: linux,extcon-usb-gpio + + id-gpios: + description: gpio for USB ID pin. See gpio binding. + vbus-gpios: + description: gpio for USB VBUS pin. + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml new file mode 100644 index 000000000000..f1ff5ff4f478 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl380.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL380/382 3-Axis Digital Accelerometer + +maintainers: + - Ramona Gradinariu <ramona.gradinariu@analog.com> + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The ADXL380/ADXL382 is a low noise density, low power, 3-axis + accelerometer with selectable measurement ranges. The ADXL380 + supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports + ±15 g, ±30 g, and ±60 g ranges. + + https://www.analog.com/en/products/adxl380.html + +properties: + compatible: + enum: + - adi,adxl380 + - adi,adxl382 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [INT0, INT1] + - const: INT1 + + vddio-supply: true + + vsupply-supply: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - vddio-supply + - vsupply-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@54 { + compatible = "adi,adxl380"; + reg = <0x54>; + vddio-supply = <&vddio>; + vsupply-supply = <&vsupply>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT0"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl380"; + reg = <0>; + spi-max-frequency = <8000000>; + vddio-supply = <&vddio>; + vsupply-supply = <&vsupply>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT0"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml index 6ddb03f61bd9..951a3a2ba8fc 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml @@ -16,6 +16,7 @@ properties: - kionix,kxcj91008 - kionix,kxtj21009 - kionix,kxtf9 + - kionix,kx022-1020 - kionix,kx023-1025 reg: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml new file mode 100644 index 000000000000..310f046e139f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + A family of similar multi-channel analog to digital converters with SPI bus. + + * https://www.analog.com/en/products/ad4695.html + * https://www.analog.com/en/products/ad4696.html + * https://www.analog.com/en/products/ad4697.html + * https://www.analog.com/en/products/ad4698.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad4695 + - adi,ad4696 + - adi,ad4697 + - adi,ad4698 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 80000000 + + spi-cpol: true + spi-cpha: true + + spi-rx-bus-width: + minimum: 1 + maximum: 4 + + avdd-supply: + description: Analog power supply. + + vio-supply: + description: I/O pin power supply. + + ldo-in-supply: + description: Internal LDO Input. Mutually exclusive with vdd-supply. + + vdd-supply: + description: Core power supply. Mutually exclusive with ldo-in-supply. + + ref-supply: + description: + External reference voltage. Mutually exclusive with refin-supply. + + refin-supply: + description: + Internal reference buffer input. Mutually exclusive with ref-supply. + + com-supply: + description: Common voltage supply for pseudo-differential analog inputs. + + adi,no-ref-current-limit: + $ref: /schemas/types.yaml#/definitions/flag + description: + When this flag is present, the REF Overvoltage Reduced Current protection + is disabled. + + adi,no-ref-high-z: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable this flag if the ref-supply requires Reference Input High-Z Mode + to be disabled for proper operation. + + cnv-gpios: + description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS. + maxItems: 1 + + reset-gpios: + description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW. + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY). + - description: Signal coming from the GP2 pin (ALERT). + - description: Signal coming from the GP3 pin (BUSY). + + interrupt-names: + minItems: 1 + items: + - const: gp0 + - const: gp2 + - const: gp3 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the GPn number: 0 to 3. + The second cell takes standard GPIO flags. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^in(?:[13579]|1[135])-supply$": + description: + Optional voltage supply for odd numbered channels when they are used as + the negative input for a pseudo-differential channel. + + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + description: + Describes each individual channel. In addition the properties defined + below, bipolar from adc.yaml is also supported. + + properties: + reg: + maximum: 15 + + common-mode-channel: + description: + Describes the common mode channel for single channels. 0xFF is REFGND + and OxFE is COM. Macros are available for these values in + dt-bindings/iio/adi,ad4695.h. Values 1 to 15 correspond to INx inputs. + Only odd numbered INx inputs can be used as common mode channels. + enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF] + default: 0xFF + + adi,no-high-z: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable this flag if the input pin requires the Analog Input High-Z + Mode to be disabled for proper operation. + + required: + - reg + + allOf: + # bipolar mode can't be used with REFGND + - if: + properties: + common-mode-channel: + const: 0xFF + then: + properties: + bipolar: false + +required: + - compatible + - reg + - avdd-supply + - vio-supply + +allOf: + - oneOf: + - required: + - ldo-in-supply + - required: + - vdd-supply + + - oneOf: + - required: + - ref-supply + - required: + - refin-supply + + # the internal reference buffer always requires high-z mode + - if: + required: + - refin-supply + then: + properties: + adi,no-ref-high-z: false + + # limit channels for 8-channel chips + - if: + properties: + compatible: + contains: + enum: + - adi,ad4697 + - adi,ad4698 + then: + patternProperties: + "^in(?:9|1[135])-supply$": false + "^channel@[0-7]$": + properties: + reg: + maximum: 7 + common-mode-channel: + enum: [1, 3, 5, 7, 0xFE, 0xFF] + "^channel@[8-9a-f]$": false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/iio/adi,ad4695.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4695"; + reg = <0>; + spi-cpol; + spi-cpha; + spi-max-frequency = <80000000>; + avdd-supply = <&power_supply>; + ldo-in-supply = <&power_supply>; + vio-supply = <&io_supply>; + refin-supply = <&supply_5V>; + com-supply = <&supply_2V5>; + in3-supply = <&supply_2V5>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Pseudo-differential channel between IN0 and REFGND. */ + channel@0 { + reg = <0>; + }; + + /* Pseudo-differential channel between IN1 and COM. */ + channel@1 { + reg = <1>; + common-mode-channel = <AD4695_COMMON_MODE_COM>; + bipolar; + }; + + /* Pseudo-differential channel between IN2 and IN3. */ + channel@2 { + reg = <2>; + common-mode-channel = <3>; + bipolar; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 190889c7b62a..66dd1c549bd3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -39,11 +39,21 @@ properties: clocks: maxItems: 1 - description: phandle to the master clock (mclk) + description: + Optionally, either a crystal can be attached externally between MCLK1 and + MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2 + pin. If absent, internal 4.92MHz clock is used, which can be made + available on MCLK2 pin. clock-names: - items: - - const: mclk + enum: + - xtal + - mclk + + "#clock-cells": + const: 0 + description: + If present when internal clock is used, configured as clock provider. interrupts: maxItems: 1 @@ -134,8 +144,6 @@ patternProperties: required: - compatible - reg - - clocks - - clock-names - interrupts - dvdd-supply - avdd-supply @@ -156,6 +164,18 @@ allOf: then: patternProperties: "^channel@[0-9a-f]+$": false + - if: + anyOf: + - required: + - clocks + - required: + - clock-names + then: + properties: + "#clock-cells": false + required: + - clocks + - clock-names unevaluatedProperties: false @@ -201,8 +221,7 @@ examples: spi-max-frequency = <1000000>; spi-cpol; spi-cpha; - clocks = <&ad7192_mclk>; - clock-names = "mclk"; + #clock-cells = <0>; interrupts = <25 0x2>; interrupt-parent = <&gpio>; aincom-supply = <&aincom>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml index 899b777017ce..bd19abb867d9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -15,10 +15,17 @@ description: | * https://www.analog.com/en/products/ad7381.html * https://www.analog.com/en/products/ad7383.html * https://www.analog.com/en/products/ad7384.html + * https://www.analog.com/en/products/ad7386.html + * https://www.analog.com/en/products/ad7387.html + * https://www.analog.com/en/products/ad7388.html * https://www.analog.com/en/products/ad7380-4.html * https://www.analog.com/en/products/ad7381-4.html * https://www.analog.com/en/products/ad7383-4.html * https://www.analog.com/en/products/ad7384-4.html + * https://www.analog.com/en/products/ad7386-4.html + * https://www.analog.com/en/products/ad7387-4.html + * https://www.analog.com/en/products/ad7388-4.html + $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -29,10 +36,16 @@ properties: - adi,ad7381 - adi,ad7383 - adi,ad7384 + - adi,ad7386 + - adi,ad7387 + - adi,ad7388 - adi,ad7380-4 - adi,ad7381-4 - adi,ad7383-4 - adi,ad7384-4 + - adi,ad7386-4 + - adi,ad7387-4 + - adi,ad7388-4 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 00fdaed11cbd..69408cae3db9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -35,65 +35,83 @@ properties: avcc-supply: true + vdrive-supply: + description: + Determines the voltage level at which the interface logic pins will + operate. + + refin-supply: + description: + The voltage supply for optional external reference voltage. + interrupts: + description: + The BUSY pin falling edge indicates that the conversion is over, and thus + new data is available. maxItems: 1 adi,conversion-start-gpios: description: - Must be the device tree identifier of the CONVST pin. - This logic input is used to initiate conversions on the analog - input channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - maxItems: 1 + Must be the device tree identifier of the CONVST pin(s). This logic input + is used to initiate conversions on the analog input channels. As the line + is active high, it should be marked GPIO_ACTIVE_HIGH. + minItems: 1 + maxItems: 2 reset-gpios: description: - Must be the device tree identifier of the RESET pin. If specified, - it will be asserted during driver probe. As the line is active high, - it should be marked GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the RESET pin. If specified, it will + be asserted during driver probe. On the AD7606x, as the line is active + high, it should be marked GPIO_ACTIVE_HIGH. On the AD7616, as the line is + active low, it should be marked GPIO_ACTIVE_LOW. maxItems: 1 standby-gpios: description: - Must be the device tree identifier of the STBY pin. This pin is used - to place the AD7606 into one of two power-down modes, Standby mode or + Must be the device tree identifier of the STBY pin. This pin is used to + place the AD7606 into one of two power-down modes, Standby mode or Shutdown mode. As the line is active low, it should be marked GPIO_ACTIVE_LOW. maxItems: 1 adi,first-data-gpios: description: - Must be the device tree identifier of the FRSTDATA pin. - The FRSTDATA output indicates when the first channel, V1, is - being read back on either the parallel, byte or serial interface. - As the line is active high, it should be marked GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA + output indicates when the first channel, V1, is being read back on either + the parallel, byte or serial interface. As the line is active high, it + should be marked GPIO_ACTIVE_HIGH. maxItems: 1 adi,range-gpios: description: - Must be the device tree identifier of the RANGE pin. The polarity on - this pin determines the input range of the analog input channels. If - this pin is tied to a logic high, the analog input range is ±10V for - all channels. If this pin is tied to a logic low, the analog input range + Must be the device tree identifier of the RANGE pin. The state on this + pin determines the input range of the analog input channels. If this pin + is tied to a logic high, the analog input range is ±10V for all channels. + On the AD760X, if this pin is tied to a logic low, the analog input range is ±5V for all channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - maxItems: 1 + GPIO_ACTIVE_HIGH. On the AD7616, there are 2 pins, and if the 2 pins are + tied to a logic high, software mode is enabled, otherwise one of the 3 + possible range values is selected. + minItems: 1 + maxItems: 2 adi,oversampling-ratio-gpios: description: - Must be the device tree identifier of the over-sampling - mode pins. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the over-sampling mode pins. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. On the AD7606X + parts that support it, if all 3 pins are tied to a logic high, software + mode is enabled. maxItems: 3 adi,sw-mode: description: - Software mode of operation, so far available only for ad7616 and ad7606b. - It is enabled when all three oversampling mode pins are connected to - high level. The device is configured by the corresponding registers. If the - adi,oversampling-ratio-gpios property is defined, then the driver will set the - oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired - to VDD. + Software mode of operation, so far available only for AD7616 and AD7606B. + It is enabled when all three oversampling mode pins are connected to high + level for the AD7606B, or both the range selection are connected to high + level for the AD7616. The device is configured by the corresponding + registers. If the adi,oversampling-ratio-gpios property is defined, then + the driver will set the oversampling gpios to high. Otherwise, it is + assumed that the pins are hardwired to VDD. type: boolean required: @@ -101,12 +119,57 @@ required: - reg - spi-cpha - avcc-supply + - vdrive-supply - interrupts - adi,conversion-start-gpios allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: adi,ad7616 + then: + properties: + adi,first-data-gpios: false + standby-gpios: false + adi,range-gpios: + maxItems: 2 + else: + properties: + adi,range-gpios: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7616 + then: + properties: + adi,oversampling-ratio-gpios: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7606-4 + - adi,ad7606-6 + - adi,ad7606-8 + then: + properties: + adi,sw-mode: false + else: + properties: + adi,conversion-start-gpios: + maxItems: 1 + unevaluatedProperties: false examples: @@ -125,6 +188,7 @@ examples: spi-cpha; avcc-supply = <&adc_vref>; + vdrive-supply = <&vdd_supply>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio>; @@ -136,7 +200,6 @@ examples: <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 26 GPIO_ACTIVE_HIGH>; standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - adi,sw-mode; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index eecd5fbab695..2606c0c5dfc6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -28,6 +28,9 @@ properties: - adi,ad9265 - adi,ad9434 - adi,ad9467 + - adi,ad9643 + - adi,ad9649 + - adi,ad9652 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml new file mode 100644 index 000000000000..12e56b1b3d3f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1921.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1921 High-Side Power/Current Monitor with Anaog Output + +maintainers: + - Matteo Martelli <matteomartelli3@gmail.com> + +description: | + The PAC1921 is a power/current monitoring device with an analog output + and I2C/SMBus interface. + + Datasheet can be found here: + https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf + +properties: + compatible: + const: microchip,pac1921 + + reg: + maxItems: 1 + + vdd-supply: true + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + label: + description: Unique name to identify which device this is. + + read-integrate-gpios: + description: + READ/INT input pin to control the current state of the device, either in + the INTEGRATE state when driven high, or in the READ state when driven low. + When not connected the pin is floating and it can be overridden by the + INT_EN register bit after asserting the READ/INT_OVR register bit. + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + - shunt-resistor-micro-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@4c { + compatible = "microchip,pac1921"; + reg = <0x4c>; + vdd-supply = <&vdd>; + #io-channel-cells = <1>; + label = "vbat"; + shunt-resistor-micro-ohms = <10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index aa24b841393c..fd93ed3991e0 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -17,6 +17,9 @@ properties: - const: rockchip,rk3399-saradc - const: rockchip,rk3588-saradc - items: + - const: rockchip,rk3576-saradc + - const: rockchip,rk3588-saradc + - items: - enum: - rockchip,px30-saradc - rockchip,rk3308-saradc diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml index cab0d425eaa4..c3a116427dc3 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml @@ -18,18 +18,39 @@ properties: - sd-modulator - ads1201 + '#io-backend-cells': + const: 0 + '#io-channel-cells': const: 0 + vref-supply: + description: Phandle to the vref input analog reference voltage. + +dependencies: + vref-supply: [ '#io-backend-cells' ] + required: - compatible - - '#io-channel-cells' + +anyOf: + - required: ['#io-backend-cells'] + - required: ['#io-channel-cells'] additionalProperties: false examples: - | - ads1202: adc { + // Backend binding example. SD modulator configured as an IIO backend device + ads1201_0: adc { + compatible = "sd-modulator"; + vref-supply = <&vdd_adc>; + #io-backend-cells = <0>; + }; + + - | + // Legacy binding example. SD modulator configured as an IIO channel provider + ads1201_1: adc { compatible = "sd-modulator"; #io-channel-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml new file mode 100644 index 000000000000..f652b98615f7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sophgo,cv1800b-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Sophgo CV1800B SoC 3 channels Successive Approximation Analog to + Digital Converters + +maintainers: + - Thomas Bonnefille <thomas.bonnefille@bootlin.com> + +description: + Datasheet at https://github.com/sophgo/sophgo-doc/releases + +properties: + compatible: + const: sophgo,cv1800b-saradc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-2]$": + $ref: adc.yaml + + properties: + reg: + items: + - minimum: 0 + maximum: 2 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sophgo,cv1800.h> + #include <dt-bindings/interrupt-controller/irq.h> + adc@30f0000 { + compatible = "sophgo,cv1800b-saradc"; + reg = <0x030f0000 0x1000>; + clocks = <&clk CLK_SARADC>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index ec34c48d4878..ef9dcc365eab 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -54,7 +54,9 @@ properties: It's not present on stm32f4. It's required on stm32h7 and stm32mp1. - clock-names: true + clock-names: + minItems: 1 + maxItems: 2 st,max-clk-rate-hz: description: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 2722edab1d9a..c24ac98bbb3d 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,9 +102,11 @@ patternProperties: items: minimum: 0 maximum: 7 + deprecated: true st,adc-channel-names: description: List of single-ended channel names. + deprecated: true st,filter-order: description: | @@ -118,6 +120,12 @@ patternProperties: "#io-channel-cells": const: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + st,adc-channel-types: description: | Single-ended channel input type. @@ -128,6 +136,7 @@ patternProperties: items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-channel-clk-src: description: | @@ -139,6 +148,7 @@ patternProperties: items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-alt-channel: description: @@ -147,6 +157,7 @@ patternProperties: If not set, channel n is connected to SPI input n. If set, channel n is connected to SPI input n + 1. type: boolean + deprecated: true st,filter0-sync: description: @@ -165,11 +176,60 @@ patternProperties: - compatible - reg - interrupts - - st,adc-channels - - st,adc-channel-names - st,filter-order - "#io-channel-cells" + patternProperties: + "^channel@[0-7]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + description: Represents the external channels which are connected to the DFSDM. + + properties: + reg: + maximum: 7 + + label: + description: + Unique name to identify which channel this is. + + st,adc-channel-type: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + $ref: /schemas/types.yaml#/definitions/string + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + $ref: /schemas/types.yaml#/definitions/string + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + io-backends: + description: + Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel. + maxItems: 1 + + required: + - reg + allOf: - if: properties: @@ -199,9 +259,19 @@ patternProperties: description: From common IIO binding. Used to pipe external sigma delta modulator or internal ADC output to DFSDM channel. + deprecated: true - required: - - io-channels + if: + required: + - st,adc-channels + then: + required: + - io-channels + + patternProperties: + "^channel@[0-7]$": + required: + - io-backends - if: properties: @@ -298,6 +368,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + // Example 1: Audio use case with generic binding dfsdm0: filter@0 { compatible = "st,stm32-dfsdm-dmic"; reg = <0>; @@ -305,12 +376,18 @@ examples: dmas = <&dmamux1 101 0x400 0x01>; dma-names = "rx"; #io-channel-cells = <1>; - st,adc-channels = <1>; - st,adc-channel-names = "dmic0"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; + #address-cells = <1>; + #size-cells = <0>; st,filter-order = <5>; + channel@1 { + reg = <1>; + label = "dmic0"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + }; + asoc_pdm0: dfsdm-dai { compatible = "st,stm32h7-dfsdm-dai"; #sound-dai-cells = <0>; @@ -318,19 +395,34 @@ examples: }; }; - dfsdm_pdm1: filter@1 { + // Example 2: Analog use case with generic binding + dfsdm1: filter@1 { compatible = "st,stm32-dfsdm-adc"; reg = <1>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dmamux1 102 0x400 0x01>; dma-names = "rx"; - #io-channel-cells = <1>; - st,adc-channels = <2 3>; - st,adc-channel-names = "in2", "in3"; - st,adc-channel-types = "SPI_R", "SPI_R"; - st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; - io-channels = <&sd_adc2 &sd_adc3>; st,filter-order = <1>; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + channel@2 { + reg = <2>; + label = "in2"; + st,adc-channel-type = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + io-backends = <&sd_adc2>; + }; + + channel@3 { + reg = <3>; + label = "in3"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + io-backends = <&sd_adc3>; + }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index d40689f233f2..1caa896fce82 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -37,6 +37,17 @@ description: | 3 | batt_dischrg_i 4 | ts_v + AXP717 + ------ + 0 | batt_v + 1 | ts_v + 2 | vbus_v + 3 | vsys_v + 4 | pmic_temp + 5 | batt_chrg_i + 6 | vmid_v + 7 | bkup_batt_v + AXP813 ------ 0 | pmic_temp @@ -52,6 +63,7 @@ properties: oneOf: - const: x-powers,axp209-adc - const: x-powers,axp221-adc + - const: x-powers,axp717-adc - const: x-powers,axp813-adc - items: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml new file mode 100644 index 000000000000..33490853497b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2664 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf + +properties: + compatible: + enum: + - adi,ltc2664 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-pos-supply: + description: Positive Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active-low Asynchronous Clear Input. A logic low at this level-triggered + input clears the part to the reset code and range determined by the + hardwired option chosen using the MSPAN pins. The control registers are + cleared to zero. + maxItems: 1 + + adi,manual-span-operation-config: + description: + This property must mimic the MSPAN pin configurations. By tying the MSPAN + pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be + hardware-configured with different mid-scale or zero-scale reset options. + The hardware configuration is latched during power on reset for proper + operation. + 0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V) + 1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V) + 2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V) + 3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V) + 4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V) + 5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V) + 6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V) + 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 7 + + io-channels: + description: + ADC channel to monitor voltages and temperature at the MUXOUT pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-3]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 3 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microvolt: + description: + This property is only allowed when SoftSpan is enabled. If not present, + [0, 5000000] is the default output range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -2500000 + - const: 2500000 + + required: + - reg + + allOf: + - if: + not: + properties: + adi,manual-span-operation-config: + const: 7 + then: + patternProperties: + "^channel@[0-3]$": + properties: + output-range-microvolt: false + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-pos-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2664"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-pos-supply = <&vpos>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microvolt = <(-10000000) 10000000>; + }; + + channel@1 { + reg = <1>; + output-range-microvolt= <0 10000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml new file mode 100644 index 000000000000..c8c434c10643 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2672 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf + +properties: + compatible: + enum: + - adi,ltc2672 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + vdd0-supply: + description: Positive Supply Voltage Input for DAC OUT0. + + vdd1-supply: + description: Positive Supply Voltage Input for DAC OUT1. + + vdd2-supply: + description: Positive Supply Voltage Input for DAC OUT2. + + vdd3-supply: + description: Positive Supply Voltage Input for DAC OUT3. + + vdd4-supply: + description: Positive Supply Voltage Input for DAC OUT4. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active Low Asynchronous Clear Input. A logic low at this level triggered + input clears the device to the default reset code and output range, which + is zero-scale with the outputs off. The control registers are cleared to + zero. + maxItems: 1 + + adi,rfsadj-ohms: + description: + If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which + results in nominal output ranges. When an external resistor of 19 kΩ to + 41 kΩ can be used instead by connecting the resistor between FSADJ and GND + it controls the scaling of the ranges, and the internal resistor is + automatically disconnected. + minimum: 19000 + maximum: 41000 + default: 20000 + + io-channels: + description: + ADC channel to monitor voltages and currents at the MUX pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 4 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microamp: + items: + - const: 0 + - enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000, + 200000000, 300000000] + + required: + - reg + - output-range-microamp + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2672"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microamp = <0 3125000>; + }; + + channel@1 { + reg = <1>; + output-range-microamp = <0 6250000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/dac.yaml b/Documentation/devicetree/bindings/iio/dac/dac.yaml new file mode 100644 index 000000000000..daa40724e1cf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/dac.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IIO Common Properties for DAC Channels + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + A few properties are defined in a common way for DAC channels. + +properties: + $nodename: + pattern: "^channel(@[0-9a-f]+)?$" + description: + A channel index should match reg. + + reg: + maxItems: 1 + + label: + description: Unique name to identify which channel this is. + + output-range-microamp: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microamperes. + + output-range-microvolt: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microvolts. + +anyOf: + - oneOf: + - required: + - reg + - output-range-microamp + - required: + - reg + - output-range-microvolt + - required: + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml index aa6a3193b4e0..5f950ee9aec7 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml @@ -17,6 +17,7 @@ description: | applications. https://www.analog.com/en/products/adf4377.html + https://www.analog.com/en/products/adf4378.html properties: compatible: @@ -73,6 +74,15 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,adf4378 + then: + properties: + clk2-enable-gpios: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml new file mode 100644 index 000000000000..ed0ea938f7f8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/sciosense,ens210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ScioSense ENS210 temperature and humidity sensor + +maintainers: + - Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk> + +description: | + Temperature and Humidity sensor. + + Datasheet: + https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf + https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf + +properties: + compatible: + oneOf: + - items: + - enum: + - sciosense,ens210a + - sciosense,ens211 + - sciosense,ens212 + - sciosense,ens213a + - sciosense,ens215 + - const: sciosense,ens210 + - const: sciosense,ens210 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@43 { + compatible = "sciosense,ens210"; + reg = <0x43>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml index 7de1b0e721ca..877e955d4ebd 100644 --- a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -14,7 +14,9 @@ description: properties: compatible: - const: liteon,ltrf216a + enum: + - liteon,ltr308 + - liteon,ltrf216a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml new file mode 100644 index 000000000000..44896795c67e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bh1745.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BH1745 colour sensor + +maintainers: + - Mudit Sharma <muditsharma.info@gmail.com> + +description: + BH1745 is an I2C colour sensor with red, green, blue and clear + channels. It has a programmable active low interrupt pin. + Interrupt occurs when the signal from the selected interrupt + source channel crosses set interrupt threshold high/low level. + +properties: + compatible: + const: rohm,bh1745 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + colour-sensor@38 { + compatible = "rohm,bh1745"; + reg = <0x38>; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vdd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml index 30a109a1bf3b..29c90ca5b258 100644 --- a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml @@ -1,23 +1,22 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml# +$id: http://devicetree.org/schemas/iio/light/rohm,bu27034anuc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BU27034 ambient light sensor +title: ROHM BU27034ANUC ambient light sensor maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes + ROHM BU27034ANUC is an ambient light sensor with 2 channels and 2 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. - https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf properties: compatible: - const: rohm,bu27034 + const: rohm,bu27034anuc reg: maxItems: 1 @@ -37,7 +36,7 @@ examples: #size-cells = <0>; light-sensor@38 { - compatible = "rohm,bu27034"; + compatible = "rohm,bu27034anuc"; reg = <0x38>; vdd-supply = <&vdd>; }; diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml index f6e22dc9814a..e4341fdced98 100644 --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -18,10 +18,15 @@ allOf: properties: compatible: - enum: - - sensortek,stk3310 - - sensortek,stk3311 - - sensortek,stk3335 + oneOf: + - enum: + - sensortek,stk3310 + - sensortek,stk3311 + - sensortek,stk3335 + - items: + - enum: + - sensortek,stk3013 + - const: sensortek,stk3310 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index 9790f75fc669..e8ca9a234027 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -18,12 +18,15 @@ properties: - asahi-kasei,ak09911 - asahi-kasei,ak09912 - asahi-kasei,ak09916 + - items: + # ak09918 is register compatible with ak09912. + - const: asahi-kasei,ak09918 + - const: asahi-kasei,ak09912 - enum: - ak8975 - ak8963 - ak09911 - ak09912 - - ak09916 deprecated: true reg: diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml index 2867ab6bf9b0..a3838ab0c524 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml @@ -36,6 +36,9 @@ properties: interrupts: maxItems: 1 + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml new file mode 100644 index 000000000000..813239f6879a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/sensirion,sdp500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: sdp500/sdp510 pressure sensor with I2C bus interface + +maintainers: + - Petar Stoykov <petar.stoykov@prodrive-technologies.com> + +description: | + Pressure sensor from Sensirion with I2C bus interface. + There is no software difference between sdp500 and sdp510. + +properties: + compatible: + oneOf: + - items: + - const: sensirion,sdp510 + - const: sensirion,sdp500 + - const: sensirion,sdp500 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure@40 { + compatible = "sensirion,sdp500"; + reg = <0x40>; + vdd-supply = <&foo>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml new file mode 100644 index 000000000000..7a83ceced11c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/awinic,aw96103.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic's AW96103 capacitive proximity sensor and similar + +maintainers: + - Wang Shuaijie <wangshuaijie@awinic.com> + +description: | + Awinic's AW96103/AW96105 proximity sensor. + The specific absorption rate (SAR) is a metric that measures + the degree of absorption of electromagnetic radiation emitted by + wireless devices, such as mobile phones and tablets, by human tissue. + In mobile phone applications, the proximity sensor is primarily + used to detect the proximity of the human body to the phone. When the + phone approaches the human body, it will actively reduce the transmit + power of the antenna to keep the SAR within a safe range. Therefore, + we also refer to the proximity sensor as a SAR sensor. + +properties: + compatible: + enum: + - awinic,aw96103 + - awinic,aw96105 + + reg: + maxItems: 1 + + interrupts: + description: + Generated by the device to announce that a close/far + proximity event has happened. + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - interrupts + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@12 { + compatible = "awinic,aw96103"; + reg = <0x12>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pp1800_prox>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml new file mode 100644 index 000000000000..64ce8bc8bd36 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TYHX HX9023S capacitive proximity sensor + +maintainers: + - Yasin Lee <yasin.lee.x@gmail.com> + +description: | + TYHX HX9023S proximity sensor. Datasheet can be found here: + http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf + +properties: + compatible: + const: tyhx,hx9023s + + reg: + maxItems: 1 + + interrupts: + description: + Generated by device to announce preceding read request has finished + and data is available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: /schemas/iio/adc/adc.yaml + type: object + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 4 + description: The channel number. + +required: + - compatible + - reg + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@2a { + compatible = "tyhx,hx9023s"; + reg = <0x2a>; + interrupt-parent = <&pio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pp1800_prox>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + single-channel = <0>; + }; + channel@1 { + reg = <1>; + single-channel = <1>; + }; + channel@2 { + reg = <2>; + single-channel = <2>; + }; + channel@3 { + reg = <3>; + diff-channels = <1 0>; + }; + channel@4 { + reg = <4>; + diff-channels = <2 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml index fd15ab5014fb..4b08be72bbd7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm MSM8939 Network-On-Chip interconnect +title: Qualcomm MSM8937/MSM8939/MSM8976 Network-On-Chip interconnect maintainers: - Konrad Dybcio <konradybcio@kernel.org> -description: | - The Qualcomm MSM8939 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. +description: + The Qualcomm MSM8937/MSM8939/MSM8976 interconnect providers support + adjusting the bandwidth requirements between the various NoC fabrics. allOf: - $ref: qcom,rpm-common.yaml# @@ -19,9 +19,15 @@ allOf: properties: compatible: enum: + - qcom,msm8937-bimc + - qcom,msm8937-pcnoc + - qcom,msm8937-snoc - qcom,msm8939-bimc - qcom,msm8939-pcnoc - qcom,msm8939-snoc + - qcom,msm8976-bimc + - qcom,msm8976-pcnoc + - qcom,msm8976-snoc reg: maxItems: 1 @@ -39,7 +45,10 @@ patternProperties: properties: compatible: - const: qcom,msm8939-snoc-mm + enum: + - qcom,msm8937-snoc-mm + - qcom,msm8939-snoc-mm + - qcom,msm8976-snoc-mm required: - compatible @@ -60,12 +69,6 @@ examples: compatible = "qcom,msm8939-snoc"; reg = <0x00580000 0x14000>; #interconnect-cells = <1>; - }; - - bimc: interconnect@400000 { - compatible = "qcom,msm8939-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; snoc_mm: interconnect-snoc { compatible = "qcom,msm8939-snoc-mm"; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml index 732e9fa001a4..343ff62d7b65 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml @@ -13,8 +13,7 @@ description: | The Qualcomm MSM8953 interconnect providers support adjusting the bandwidth requirements between the various NoC fabrics. - See also: - - dt-bindings/interconnect/qcom,msm8953.h + See also: include/dt-bindings/interconnect/qcom,msm8953.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 2cd1f5590fd9..189f5900ee50 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - qcom,qcm2290-cpu-bwmon + - qcom,sa8775p-cpu-bwmon - qcom,sc7180-cpu-bwmon - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon @@ -39,6 +40,7 @@ properties: - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: + - qcom,sa8775p-llcc-bwmon - qcom,sc7180-llcc-bwmon - qcom,sc8280xp-llcc-bwmon - qcom,sm6350-cpu-bwmon diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 9318b845ec35..1b9164dc162f 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -71,7 +71,7 @@ properties: - qcom,sdx65-system-noc - qcom,sm8150-aggre1-noc - qcom,sm8150-aggre2-noc - - qcom,sm8150-camnoc-noc + - qcom,sm8150-camnoc-virt - qcom,sm8150-compute-noc - qcom,sm8150-config-noc - qcom,sm8150-dc-noc @@ -113,6 +113,9 @@ allOf: properties: compatible: enum: + - qcom,sc8180x-camnoc-virt + - qcom,sc8180x-mc-virt + - qcom,sc8180x-qup-virt - qcom,sdx65-mc-virt - qcom,sm8250-qup-virt then: diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml index c27a8f33d8d7..0840a3d92513 100644 --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1 memory-region: maxItems: 1 @@ -81,7 +82,7 @@ patternProperties: iommus: minItems: 1 - maxItems: 3 + maxItems: 10 qcom,nsessions: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml index 3dde10de4630..4f4253441547 100644 --- a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml @@ -29,6 +29,12 @@ properties: reset-gpios: maxItems: 1 + bootloader-backdoor-gpios: + maxItems: 1 + description: | + gpios to enable bootloader backdoor in cc1352p7 bootloader to allow + flashing new firmware. + vdds-supply: true required: @@ -46,6 +52,7 @@ examples: clocks = <&sclk_hf 0>, <&sclk_lf 25>; clock-names = "sclk_hf", "sclk_lf"; reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>; + bootloader-backdoor-gpios = <&pio 36 GPIO_ACTIVE_LOW>; vdds-supply = <&vdds>; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml index 70fb2ad25103..1b20b49eee79 100644 --- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml @@ -15,6 +15,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index e21c06e9a741..b2cb76cf9053 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -14,7 +14,7 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs. allOf: - $ref: nvmem.yaml# @@ -36,6 +36,7 @@ properties: - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp - fsl,imx93-ocotp + - fsl,imx95-ocotp - const: syscon - items: - enum: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml index 3b40f7880774..382507060651 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml @@ -21,6 +21,7 @@ oneOf: - $ref: fixed-layout.yaml - $ref: kontron,sl28-vpd.yaml - $ref: onie,tlv-layout.yaml + - $ref: u-boot,env.yaml properties: compatible: true diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml index 9c36afc7084b..56a8f55d4a09 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml# +$id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: U-Boot environment variables +title: U-Boot environment variables layout description: | U-Boot uses environment variables to store device parameters and @@ -21,9 +21,6 @@ description: | This binding allows marking storage device (as containing env data) and specifying used format. - Right now only flash partition case is covered but it may be extended to e.g. - UBI volumes in the future. - Variables can be defined as NVMEM device subnodes. maintainers: @@ -42,6 +39,7 @@ properties: const: brcm,env reg: + description: Partition offset and size for env on top of MTD maxItems: 1 bootcmd: @@ -58,6 +56,17 @@ properties: description: The first argument is a MAC address offset. const: 1 +allOf: + - if: + properties: + $nodename: + not: + contains: + pattern: "^partition@[0-9a-f]+$" + then: + properties: + reg: false + additionalProperties: false examples: @@ -101,3 +110,23 @@ examples: }; }; }; + - | + partition@0 { + reg = <0x0 0x100000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-u-boot-env { + volname = "env"; + + nvmem-layout { + compatible = "u-boot,env"; + + ethaddr { + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 92bfe25f0571..3b2aa605a551 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -17,6 +17,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: @@ -32,6 +33,8 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object + $ref: layouts/fixed-cell.yaml + unevaluatedProperties: false properties: st,non-secure-otp: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index adb15f4c8f6c..b320a39de7fe 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1541,6 +1541,8 @@ patternProperties: description: Turing Machines, Inc. "^tyan,.*": description: Tyan Computer Corporation + "^tyhx,.*": + description: NanjingTianyihexin Electronics Ltd. "^u-blox,.*": description: u-blox "^u-boot,.*": |