diff options
| author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2017-01-23 13:34:34 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-01-26 15:27:37 +0100 |
| commit | 2956b5d94a76b596fa5057c2b3ca915cb27d7652 (patch) | |
| tree | 3a1dbce1201ef4923a4124f63eb209026e8fba7e /Documentation/gpio/driver.txt | |
| parent | pinctrl: Allow configuration of pins from gpiolib based drivers (diff) | |
| download | linux-2956b5d94a76b596fa5057c2b3ca915cb27d7652.tar.xz linux-2956b5d94a76b596fa5057c2b3ca915cb27d7652.zip | |
pinctrl / gpio: Introduce .set_config() callback for GPIO chips
Currently we already have two pin configuration related callbacks
available for GPIO chips .set_single_ended() and .set_debounce(). In
future we expect to have even more, which does not scale well if we need
to add yet another callback to the GPIO chip structure for each possible
configuration parameter.
Better solution is to reuse what we already have available in the
generic pinconf.
To support this, we introduce a new .set_config() callback for GPIO
chips. The callback takes a single packed pin configuration value as
parameter. This can then be extended easily beyond what is currently
supported by just adding new types to the generic pinconf enum.
If the GPIO driver is backed up by a pinctrl driver the GPIO driver can
just assign gpiochip_generic_config() (introduced in this patch) to
.set_config and that will take care configuration requests are directed
to the pinctrl driver.
We then convert the existing drivers over .set_config() and finally
remove the .set_single_ended() and .set_debounce() callbacks.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/gpio/driver.txt')
| -rw-r--r-- | Documentation/gpio/driver.txt | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index 747c721776ed..ad8f0c0cd13f 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -146,10 +146,11 @@ a pull-up resistor is needed on the outgoing rail to complete the circuit, and in the second case, a pull-down resistor is needed on the rail. Hardware that supports open drain or open source or both, can implement a -special callback in the gpio_chip: .set_single_ended() that takes an enum flag -telling whether to configure the line as open drain, open source or push-pull. -This will happen in response to the GPIO_OPEN_DRAIN or GPIO_OPEN_SOURCE flag -set in the machine file, or coming from other hardware descriptions. +special callback in the gpio_chip: .set_config() that takes a generic +pinconf packed value telling whether to configure the line as open drain, +open source or push-pull. This will happen in response to the +GPIO_OPEN_DRAIN or GPIO_OPEN_SOURCE flag set in the machine file, or coming +from other hardware descriptions. If this state can not be configured in hardware, i.e. if the GPIO hardware does not support open drain/open source in hardware, the GPIO library will instead |