hwmon: (oxp-sensors) Add support for multiple new devices.

Add support for the OrangePi NEO-01. It uses different registers for PWM
manual mode, set PWM, and read fan speed than previous devices. Valid PWM
input and duty cycle is 1-244, we scale this from 1-255 to maintain
compatibility with the existing interface.

Add OneXPlayer 2 series, OneXFly, and X1 series models. The 2/X1 series use
new registers for turbo button takeover and read fan speed. X1 has an Intel
variant so change the CPU detection at init to only check for the affected
devices. While at it, adjust formatting of some constants and reorder all
cases alphabetically for consistency. Rename OXP_OLD constants to OXP_MINI
for disambiguation. Update code comments for clarity.

Add support for AYANEO models 2S, AIR 1S, Flip series, GEEK 1S, and KUN.

Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Kevin Greenberg <kdgreenberg234@protonmail.com>
Tested-by: Joshua Tam <csinaction@pm.me>
Tested-by: Parth Menon <parthasarathymenon@gmail.com>
Tested-by: Philip Müller <philm@manjaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408160329.TLNbIwRC-lkp@intel.com/
Message-ID: <20240822183525.27289-2-derekjohn.clark@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 36 insertions, 18 deletions

diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst
index 50618f064379..581c4dafbfa1 100644
--- a/Documentation/hwmon/oxp-sensors.rst
+++ b/Documentation/hwmon/oxp-sensors.rst
@@ -10,41 +10,59 @@ Authors:
 Description:
 ------------
 
-Handheld devices from One Netbook and Aya Neo provide fan readings and fan
-control through their embedded controllers.
+Handheld devices from OneNetbook, AOKZOE, AYANEO, And OrangePi provide fan
+readings and fan control through their embedded controllers.
 
-Currently only supports AMD boards from One X Player, AOK ZOE, and some Aya
-Neo devices. One X Player Intel boards could be supported if we could figure
-out the EC registers and values to write to since the EC layout and model is
-different. Aya Neo devices preceding the AIR may not be supportable as the EC
-model is different and do not appear to have manual control capabilities.
+Currently supports OneXPlayer devices, AOKZOE, AYANEO, and OrangePi
+handheld devices. AYANEO devices preceding the AIR and OneXPlayer devices
+preceding the Mini A07 are not supportable as the EC model is different
+and do not have manual control capabilities.
 
-Some models have a toggle for changing the behaviour of the "Turbo/Silent"
-button of the device. It will change the key event that it triggers with
-a flip of the `tt_toggle` attribute. See below for boards that support this
-function.
+Some OneXPlayer and AOKZOE models have a toggle for changing the behaviour
+of the "Turbo/Silent" button of the device. It will change the key event
+that it triggers with a flip of the `tt_toggle` attribute. See below for
+boards that support this function.
 
 Supported devices
 -----------------
 
 Currently the driver supports the following handhelds:
 
- - AOK ZOE A1
- - AOK ZOE A1 PRO
- - Aya Neo 2
- - Aya Neo AIR
- - Aya Neo AIR Plus (Mendocino)
- - Aya Neo AIR Pro
- - Aya Neo Geek
+ - AOKZOE A1
+ - AOKZOE A1 PRO
+ - AYANEO 2
+ - AYANEO 2S
+ - AYANEO AIR
+ - AYANEO AIR 1S
+ - AYANEO AIR Plus (Mendocino)
+ - AYANEO AIR Pro
+ - AYANEO Flip DS
+ - AYANEO Flip KB
+ - AYANEO Geek
+ - AYANEO Geek 1S
+ - AYANEO KUN
+ - OneXPlayer 2
+ - OneXPlayer 2 Pro
  - OneXPlayer AMD
  - OneXPlayer mini AMD
  - OneXPlayer mini AMD PRO
+ - OneXPlayer OneXFly
+ - OneXPlayer X1 A
+ - OneXPlayer X1 i
+ - OneXPlayer X1 mini
+ - OrangePi NEO-01
 
 "Turbo/Silent" button behaviour toggle is only supported on:
  - AOK ZOE A1
  - AOK ZOE A1 PRO
+ - OneXPlayer 2
+ - OneXPlayer 2 Pro
  - OneXPlayer mini AMD (only with updated alpha BIOS)
  - OneXPlayer mini AMD PRO
+ - OneXPlayer OneXFly
+ - OneXPlayer X1 A
+ - OneXPlayer X1 i
+ - OneXPlayer X1 mini
 
 Sysfs entries
 -------------