docs: usb: convert documents to ReST

Convert USB documents to ReST, in order to prepare for adding it
to the kernel API book, as most of the stuff there are driver or
subsystem-related.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 27 insertions, 15 deletions

diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index a91adb26ea7b..d1111b74bf75 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -1,19 +1,27 @@
-CHANGES
+================
+mtouchusb driver
+================
+
+Changes
+=======
 
 - 0.3 - Created based off of scanner & INSTALL from the original touchscreen
   driver on freecode (http://freecode.com/projects/3mtouchscreendriver)
 - Amended for linux-2.4.18, then 2.4.19
 
 - 0.5 - Complete rewrite using Linux Input in 2.6.3
-   Unfortunately no calibration support at this time
+  Unfortunately no calibration support at this time
 
 - 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
-   Changed reset from standard USB dev reset to vendor reset
-   Changed data sent to host from compensated to raw coordinates
-   Eliminated vendor/product module params
-   Performed multiple successful tests with an EXII-5010UC
+  Changed reset from standard USB dev reset to vendor reset
+  Changed data sent to host from compensated to raw coordinates
+  Eliminated vendor/product module params
+  Performed multiple successful tests with an EXII-5010UC
+
+Supported Hardware
+==================
 
-SUPPORTED HARDWARE:
+::
 
         All controllers have the Vendor: 0x0596 & Product: 0x0001
 
@@ -29,9 +37,10 @@ SUPPORTED HARDWARE:
         USB Capacitive - Black Case     EXII-5030UC
         USB Capacitive - No Case        EXII-5050UC
 
-DRIVER NOTES:
+Driver Notes
+============
 
-Installation is simple, you only need to add Linux Input, Linux USB, and the 
+Installation is simple, you only need to add Linux Input, Linux USB, and the
 driver to the kernel.  The driver can also be optionally built as a module.
 
 This driver appears to be one of possible 2 Linux USB Input Touchscreen
@@ -49,24 +58,27 @@ The controller screen resolution is now 0 to 16384 for both X and Y reporting
 the raw touch data.  This is the same for the old and new capacitive USB
 controllers.
 
-Perhaps at some point an abstract function will be placed into evdev so 
-generic functions like calibrations, resets, and vendor information can be 
+Perhaps at some point an abstract function will be placed into evdev so
+generic functions like calibrations, resets, and vendor information can be
 requested from the userspace (And the drivers would handle the vendor specific
 tasks).
 
-TODO:
+TODO
+====
 
 Implement a control urb again to handle requests to and from the device
 such as calibration, etc once/if it becomes available.
 
-DISCLAIMER:
+Disclaimer
+==========
 
-I am not a MicroTouch/3M employee, nor have I ever been.  3M does not support 
+I am not a MicroTouch/3M employee, nor have I ever been.  3M does not support
 this driver!  If you want touch drivers only supported within X, please go to:
 
 http://www.3m.com/3MTouchSystems/
 
-THANKS:
+Thanks
+======
 
 A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
 testing!