diff options
| author | Brian Masney <masneyb@onstation.org> | 2018-08-03 02:18:53 +0200 |
|---|---|---|
| committer | Andy Gross <andy.gross@linaro.org> | 2018-09-13 21:49:47 +0200 |
| commit | fe8d81fe7d9aab6a8e22c8b115eb06b7707087db (patch) | |
| tree | 365db269cf99ebfb7ceca390bb757bc1301a047f /arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | |
| parent | ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards (diff) | |
| download | linux-fe8d81fe7d9aab6a8e22c8b115eb06b7707087db.tar.xz linux-fe8d81fe7d9aab6a8e22c8b115eb06b7707087db.zip | |
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
This patch adds device tree bindings for the mpu6515 to the LG Nexus 5
(hammerhead) phone. Confirmed that the gyroscope / accelerometer
(mpu6515), magnetometer (ak8963), and temperature / pressure (bmp280)
sensors are available on the phone.
Interrupts are not working properly on the ak8963 magnetometer so they
are currently not configured.
The bmp280 retuns temperature/pressure measurement skipped errors but
will reliably work if I run:
echo 1 > in_pressure_oversampling_ratio
echo 1 > in_temp_oversampling_ratio
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index c2dc9d09484a..928affae1885 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -241,6 +241,24 @@ bias-pull-up; }; }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; + + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; + }; }; sdhci@f9824900 { @@ -277,6 +295,44 @@ linux,code = <KEY_VOLUMEDOWN>; }; }; + + i2c@f9968000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + // Currently only works in polling mode. + // gpios = <&msmgpio 61 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; + }; }; &spmi_bus { |