ARM: dts: at91: sama5d3: switch to new clock bindings

Switch sama5d3 boards to the new PMC clock bindings.

This prevents the wb50n to use the out of spec rate for USART1.

Link: https://lore.kernel.org/r/20200110222744.1261464-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

1 files changed, 40 insertions, 384 deletions

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f11b018e9173..f3ce561b46ab 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -108,7 +108,7 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "mci_clk";
 			};
 
@@ -123,7 +123,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -137,7 +137,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -148,7 +148,7 @@
 				#size-cells = <0>;
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 
@@ -166,7 +166,7 @@
 				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				status = "disabled";
 			};
 
@@ -184,7 +184,7 @@
 				scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 				status = "disabled";
 			};
 
@@ -197,7 +197,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -211,7 +211,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -222,7 +222,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -232,7 +232,7 @@
 				reg = <0xf002c000 0x300>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				status = "disabled";
 			};
 
@@ -242,7 +242,7 @@
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
 				clock-names = "isi_clk";
 				status = "disabled";
 				port {
@@ -267,7 +267,7 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 				clock-names = "mci_clk";
 			};
 
@@ -282,7 +282,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -296,7 +296,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -323,7 +323,7 @@
 					&pinctrl_adc0_ad10
 					&pinctrl_adc0_ad11
 					>;
-				clocks = <&adc_clk>,
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0xfff>;
@@ -370,7 +370,7 @@
 				scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				status = "disabled";
 			};
 
@@ -383,7 +383,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -397,7 +397,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -408,7 +408,7 @@
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
 				dma-names = "tx";
-				clocks = <&sha_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "sha_clk";
 			};
 
@@ -419,7 +419,7 @@
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
 				dma-names = "tx", "rx";
-				clocks = <&aes_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
 				clock-names = "aes_clk";
 			};
 
@@ -430,7 +430,7 @@
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
 				dma-names = "tx", "rx";
-				clocks = <&tdes_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
 				clock-names = "tdes_clk";
 			};
 
@@ -438,14 +438,14 @@
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xf8040000 0x100>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&trng_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 			};
 
 			hsmc: hsmc@ffffc000 {
 				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
 				reg = <0xffffc000 0x1000>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
-				clocks = <&hsmc_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges;
@@ -462,7 +462,7 @@
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 				clock-names = "dma_clk";
 			};
 
@@ -471,14 +471,14 @@
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
 				clock-names = "dma_clk";
 			};
 
 			ramc0: ramc@ffffea00 {
 				compatible = "atmel,sama5d3-ddramc";
 				reg = <0xffffea00 0x200>;
-				clocks = <&ddrck>, <&mpddr_clk>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
@@ -491,7 +491,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&dbgu_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -967,7 +967,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -978,7 +978,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -989,7 +989,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -1000,7 +1000,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -1011,7 +1011,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				};
 			};
 
@@ -1019,353 +1019,9 @@
 				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc &main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,sama5d3-clk-pll";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <8000000 50000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 166000000>;
-					atmel,clk-divisors = <1 2 4 3>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-				};
-
-				smd: smdclk {
-					compatible = "atmel,at91sam9x5-clk-smd";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					smdck: smdck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					dbgu_clk: dbgu_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					hsmc_clk: hsmc_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					pioE_clk: pioE_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <18>;
-						#clock-cells = <0>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					twi2_clk: twi2_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-
-					dma1_clk: dma1_clk {
-						#clock-cells = <0>;
-						reg = <31>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <32>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <33>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <37>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <38>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <39>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					sha_clk: sha_clk {
-						#clock-cells = <0>;
-						reg = <42>;
-					};
-
-					aes_clk: aes_clk {
-						#clock-cells = <0>;
-						reg = <43>;
-					};
-
-					tdes_clk: tdes_clk {
-						#clock-cells = <0>;
-						reg = <44>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <45>;
-					};
-
-					fuse_clk: fuse_clk {
-						#clock-cells = <0>;
-						reg = <48>;
-					};
-
-					mpddr_clk: mpddr_clk {
-						#clock-cells = <0>;
-						reg = <49>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
 			reset_controller: rstc@fffffe00 {
@@ -1384,7 +1040,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			watchdog: watchdog@fffffe40 {
@@ -1426,7 +1082,7 @@
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&udphs_clk>, <&utmi>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
@@ -1540,7 +1196,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1549,7 +1205,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
 			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
@@ -1565,7 +1221,7 @@
 				  0x1 0x0 0x40000000 0x10000000
 				  0x2 0x0 0x50000000 0x10000000
 				  0x3 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller: nand-controller {